Used Swm Milling Machine for sale (84,220)

Condition: ready for operation (used), Year of construction: 1973, Deckel FP2 tool milling machine with 3-axis digital readout. The machine is in operational condition. Rigid table, SK 40 spindle taper. Accessories: various collets and milling arbors, tailstock support, vise, operating manual. Defects: one axis of the digital readout does not count, table has breakouts. Can be demonstrated under power by arrangement. Lodpfex Nclhjx Ah Uohr

Year of construction: 2020, condition: like new (used), - Second-hand machine, as good as new - 3/5-axis CNC portal milling machine with single table and fixed crossbeam - Control: Heidenhain TNC 640 HSCI Travels for machining: - X- machine table 6.000 mm - Y- milling unit 4.400 mm - Z- ram 1.500 mm - C-axis in ram [RAM], endless rotation n x 360°. Machine table: - Length 5,500 mm - Width 3.000 mm - Table load 40,000 kg (max.) - Table surface over floor 200 mm - 1 straightening T-slot according to DIN 650 28H8 mm - T-slots according to DIN 650 28H12 mm - Center distance of the T-slots 250 mmn - Position of the clamping T-slots crosswise Portal passage: - Distance between clamping surface and max. 2,300 mm Bottom edge of slide interface min. 800 mm - Machine passage in height, approx. 2,200 mm - Machine passage in width, approx. 3,500 mm Travel speeds: - X-axis max. 30,000 mm/min. - Y-axis max. 30.000 mm/min. - Z-axis max. 15.000 mm/min. - A-axis max. 12 rpm - C-axis max. 12 rpm - Acceleration linear axes max. 1,5 m/sec2 Dimensions: - Total length approx. 15,200 mm - Total width approx. 9,950 mm Lhsdjiux Dzjpfx Ah Usr - Total height, floor level to RAM upper edge approx. 6,950 mm

Condition: used, Year of construction: 1999, x-travel 4000 mm y-travel 1000 mm z-travel 1500 mm Control Heidenhain 355 weight max. 10 t Lhedpfxsxzuz No Ah Uor ja more pictures available

Condition: reconditioned (used), Year of construction: 2004, Universal Tool Milling Machine Make: KUNZMANN Model: WF 610 MC Year of manufacture: 2017 – partially overhauled, newly painted, RAL7035 light grey / RAL3027 raspberry red / RAL7016 anthracite grey Machine no.: 610648 Machine hours: approx. 2,100 hours machine on Lhodex H Nmaepfx Ah Uor approx. 7,200 hours control on approx. 500 hours program run approx. 360 hours axes approx. 450 hours spindle S1 approx. 5 hours hydraulics with warranty Geometry inspection with test protocol Equipment/Accessories: - Path control HEIDENHAIN TNC 620 - Electronic handwheel HEIDENHAIN HR 510 FS, new - Oriented spindle stop, vertical and horizontal with thread cutting cycle without compensation chuck - Preparation set for touch probe TS 260 with mounting taper on operator panel and spindle lock - Touch probe Heidenhain TS 260 - Fixed table 800 x 425 mm (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic clamping system DIN 69872 - Central lubrication, electric - Coolant system - Splash guard enclosure, traversable, electrically secured - Left side window of splash guard enclosure removable, electrically secured - Control panel on machine base - Operating manual Used as seen The machine is technically in accordance with the standard of its year of manufacture.

Year of construction: 2000, condition: ready for operation (used), Control Unit Brand Andronic Model 2000 Main Drive Lhedpfx Ahjx D Dyms Uor Spindle speed range 25000 rpm Number of axis 3 Additional Equipment Scraper belt conveyor with discharge height 1200 mm Temperature stabilization switch cabinet with high-performance cooling unit This 3-axis MIKROMAT 8V gantry milling machine was manufactured in 2000. It features an Andronic 2000 control system, automatic tool change with a 16-position ATC, and a high-speed spindle capable of up to 30,000 rpm in short bursts. Equipped with a BLUM laser system for precise tool monitoring and measurement, and a scraper belt conveyor by Knoll for efficient chip removal. Consider the opportunity to buy this MIKROMAT 8V gantry milling machine. Contact us for more information about this machine. Application Types Milling

Condition: as good as new (ex-display), Year of construction: 2025, Immediately available stock machine from our showroom Stuttgart. ( subject to prior sale) Contact us for an offer. EMCOMAT FB 450 with Siemens control. New machine immediately available. ( subject to prior sale) Contact us for an offer. We will be happy to make you an offer. Ljdpfx Aoibd Alsh Ushr Visit our demonstration center Arbeitsbereich X450/Y350/Z400mm Table size 800x400mm 7/10kW drive power speed range stepless 10-5000 rpm Siemens 828D Universal tool milling and drilling machine with Sinumerkik 828D contouring control and hydraulic tool clamping. Arbeitsbereich X450/Y350/Z400mm 7/10kW drive power Speed from 10-5000 rpm feed rate from 10-2000 mm/min rapid traverse up to 5000 mm/min Toolmaker accuracy DIN8615 tool holder DIN 69871 SK40 Includes:Linear guides Ball screws Vertical milling head +/-90° swiveling with 80mm quill stroke Swing out device for vertical head Hydraulic tool clamping Coolant device LED machine lamp Rigid angular table 800x400mm Chip tray Automatic central lubrication Operating tool Documentation Sinumerik 828D contouring control with 15" multi-touch screen incl. control package in 3 axes with ball screws and servo motors, machining cycles with graphic support: Drilling cycles for drilling, deep drilling, reaming, tapping (with length compensation) on hole circle and hole lines, rectangular and circular pocket, slot milling cycle, cycles for line-off, etc., USB interface

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, Multi-spindle milling machine Fritz Werner SSF 3Article number: 07-99-001Manufacturer: Fritz WernerVery good overall conditionMachine workshop testedDelivery time: Immediate - sale subject to prior saleYear of construction: approx. 1980Dimensions (L x W x H): approx. 1900 x 1800 x 1800 mmWeight: approx. 1200 kgTravel ranges:X-axis: approx. 600 mmY-axis: approx. 200 mmZ-axis: approx. 500 mmTable clamping area: approx. 740 x 220 mmSpindle:Speed range: approx. 3000 rpmDrive power: approx. 7.5 kWFeeds & rapid movements: in all 3 axesMax. milling area (dovetail): approx. 400 mm widthSwivel range of 1st & 3rd milling spindle: approx. 50-80 degreesHeight adjustment 1st & 3rd milling spindle: approx. 80 mmHeight adjustment 2nd milling spindle: approx. 50 mmAccessories:Left/right operationMechanical vice10 pieces of various milling head attachmentsWork lightFurther accessories available upon requestPrice and further technical details available upon request. Lhodpfjwl Aqvox Ah Ujr

Condition: used, chain width: 17 mm engine: 2,2 kW Rotatable: + - 45 ° Table swivel: + - 45 ° Further data: See PDF Lock case milling machine, door lock milling machine or chain milling machine / chain mortiser Framar type MC 60 for simultaneous milling of lock cases and drilling of door holes on doors and windows as well as many other possible uses. Chain width: 17 mm Motor: 2.2 kW Lhjdpfx Aetunbuoh Ujr

Condition: used, Year of construction: 2001, functionality: fully functional, Machine Data • Gantry system with fixed table and moving portal for minimal footprint • Base, bridge, and bridge columns made from steel, welded in one piece, stress-relieved and machined • Main machine assemblies are ribbed welded constructions, optimized for the best stiffness-to-weight ratio, vibration damping, and high acceleration • Each machine design is verified and optimized via finite element analysis (FEA) to ensure maximum quality, performance, and safety • Easily accessible machine table for straightforward loading and unloading with forklift or overhead crane • Ground precision linear guides with high preload and additional cover bands for optimal chip removal on all axes • Brushless digital A/C servo motors and controllers on all axes • Dual-sided, synchronized drive on the X-axis (gantry drive) • Rack and pinion drive on X and Y axes • Precision ball screws with double pillow block support on the Z-axis • Precision planetary gearboxes with low backlash • Fully enclosed cable drag chains protect cable harnesses from chips and dust • High-quality shielded cable drag chain wiring ensures superior protection against faults and failures • X-axis working area: 1,540 mm • Y-axis working area: 1,540 mm • Z-axis clearance: 150 mm • Z-axis travel: 200 mm • Network connection via Ethernet • Remote maintenance via Internet FlexiCAM Control • DIN-ISO 66025 G-code compatible • Includes TCP/IP network interface • 256 MB RAM • Simple operation via handheld control unit with display Ledox E Ttbjpfx Ah Ujhr Spindle with Manual Tool Change • Power consumption: 2.2 kW • 5,000–24,000 rpm, steplessly programmable • Cooling by integrated electric fan Extraction System for Manual Tool Change • Hose connection diameter: 80–90 mm FlexiCAM Midrange Vacuum Table (Side Channel Blower) • T-slot profiles, individual ball valves, 6 zones • Side channel blower: 7.5 / 9 kW • Approx. 558 m³/h (50 Hz) or 654 m³/h (60 Hz) Safety Devices • CE-compliant to DIN EN 13849 • Includes EMC filter, emergency stop • Light barrier system controlled by machine controller

Condition: used, Year of construction: 1982, x-travel 300 mm y-travel 160 mm z-travel 340 mm feeds -stepless- 5-500 mm/min rapid traverse 1200 mm/min spindle turning speed range 40 - 2000 U/min tool taper Normkegel 40 table length 600 mm table width 120 mm voltage 380 V frequency 50 Hz rated current 13 A weight of the machine ca. 0,750 t dimensions of the machine ca. 1,8 x 1,5 x 1,8 m DESCRIPTION Machine incl: active three-axis digital readout HEIDENHAIN documentation Lhsdpfxovvnfuo Ah Ujr various tool holders Machine vice etc.

Year of construction: 1991, condition: ready for operation (used), Control Unit Brand HEIDENHAIN Model TNC 415 This 3-axis Huron X 61 38 bed type milling machine was manufactured in 1991. It is equipped with a Heidenheim TNC 415 control system and offers substantial travel dimensions with an X-axis of 2400 mm, Y-axis of 1000 mm, and Z-axis of 1000 mm. The machine's transport dimensions are 3000 mm in breadth, 1400 mm in thickness, and 3000 mm in height. Consider the opportunity to buy this Huron X 61 38 machine we have for sale. Reach out for more information. Application Types Lodpfsx D Humex Ah Ujhr Milling

Condition: new, Year of construction: 2025, functionality: fully functional, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 10 rpm, total height: 1,990 mm, total length: 2,100 mm, table width: 2,190 mm, rotational speed (max.): 5,000 rpm, rotational speed (min.): 10 rpm, overall weight: 2,370 kg, workpiece weight (max.): 300 kg, Equipment: rotational speed infinitely variable, Universal milling and drilling machine with Heidenhain TNC 620 contouring control as manual machine operable via handwheels. Control can be locked via key switch and hydraulic tool clamping. Arbeitsbereich X600/Y400/Z400mm 7/10kW drive power speed from 10-5000 rpm feed rate from 10-2000 mm/min rapid traverse up to 5000 mm/min Toolmaker accuracy DIN8615 tool holder DIN 69871 SK40 Includes:Linear guides Ball screws Vertical milling head +/-90° swiveling with 80mm quill stroke Swing out device for vertical head Hydraulic tool clamping Coolant device LED machine lamp Rigid angular table 800x400mm Chip tray Automatic central lubrication Operating tool Documentation Heidenhain TNC 620 contouring control with 19" multi-touch screen incl. drive package in 3 axes with ball screws and servo motors, Fixed cycles with graphic support: Drilling cycles for drilling, deep drilling, reaming, Lhodjibarqjpfx Ah Uer tapping (with length compensation) on hole circle and hole lines, rectangular and circular pocket, slot milling cycle, cycles for line-off, etc., USB interface, PC keyboard

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 124 Control Very Good CONDITION CE-Compliant!! Technical Data: >> Year of manufacture: 2003 Machine No. 344174 >> Fixed angular table >> Infinitely variable spindle speed up to 4000 rpm >> Infinitely variable feed in 3 axes from 0 to 2000 mm/min >> Travel distances X/Y/Z: 400/320/400 mm >> Table area: 650 x 350 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space requirements approx.: 2.3 x 2 x 2 m >> Drive power: 12 KVA Accessories and Equipment: >> Heidenhain TNC 124 control >> Hydraulic clamping, vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, control manual, and programming examples >> Handwheels >> Coolant system Lhjdpex Elxpjfx Ah Uer >> Electronic handwheel Heidenhain About the Machine: Offered here is a Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 124 control. This universal milling machine is in very good condition. It comes from a facility where it was only sparingly used for training purposes. The control system is very easy to operate. The machine also features hydraulic clamping both vertically and horizontally. Converting from vertical to horizontal operation is very straightforward by simply swiveling the vertical head aside. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected in our workshop. You are welcome to view and test the Kunzmann under power at our facility. The machine is available immediately.

Condition: used, A rigid table milling machine or rigid milling machine Bäuerle type SFM for profiling and milling wood, equipped with a table extension and a feed device. Lsdpfx Asv Hf Uueh Ujhr Spindle ø: 30 clamping length: about 120 mm speeds (milling machine): 3,000/5,000/6,000/10,000 rpm Direction of rotation: Left and Right

Condition: used, Year of construction: 2002, functionality: fully functional, Machine Data • Gantry-type machine with fixed table and moving portal for minimal footprint • Base frame, bridge, and bridge uprights made from welded, stress-relieved, and machined steel in one piece • Main machine assemblies consist of ribbed welded constructions engineered for optimal stiffness-to-weight ratio, vibration damping, and high acceleration • Each machine design is verified and optimized using finite element analysis (FEA) to ensure maximum quality, performance, and safety • Easily accessible machine table for straightforward loading and unloading via forklift or overhead crane • Ground precision linear guides with high pre-load and additional cover tape for optimal chip removal on all axes • Brushless digital A/C servo motors and controllers on all axes • Dual-side synchronised drive on the X-axis (gantry drive) Lhjdpox E Tmbjfx Ah Usr • Rack-and-pinion drive on the X and Y axes • Precision ball screw drives with dual-end bearing units on the Z axis • Precision planetary gearboxes with low backlash • Enclosed cable drag chains protect the drag chain cabling against chips and dust • High-quality shielded drag chain cables offer maximum protection against interference and failures • X-axis travel: 3,120 mm • Y-axis travel: 2,190 mm • Z-axis clearance: 200 mm • Z-axis stroke: 280 mm • Network connectivity via Ethernet • Remote service via Internet Panel-Based CNC Control System • Touchscreen display • Multifunction keyboard with integrated touchpad • Integrated industrial PC with Windows 7 Professional, hard drive, and Ethernet • Comprehensive remote maintenance functionalities • Includes hand-held unit with electronic handwheel • MCP with rotary switch for feed and spindle override • Mobile control cabinet Hand-held Operating Device • Fast, increment-precise positioning • Handwheel with magnetic detent • Coarse, medium, and fine positioning • 2-channel emergency stop • Protection class IP65 Milling Spindle • Max. spindle power: 4 kW • Max. speed: 30,000 rpm • ISO-25 tool taper • Max. tool diameter (shank): 12 mm • Air-cooled • Pneumatic tool taper clamping • Dry, clean, oil-free compressed air required on customer side (< 0.1 μm, < 7 bar) Automatic Tool Changer / Linear • Linear tool magazine mounted outside the working area • Basic configuration: 4 slots • Up to 20 slots ISO-25 Extraction Unit for Automatic Tool Change • Hose connection diameter: 110 mm • Automatic up/down function for tool change Tool Length Sensor • Automatic tool length measurement via M command • Hard metal contact plate • Measuring accuracy: 0.001 mm • Contact force: 1.5 N Tool Length Sensor • Automatic tool length measurement via M command • Hard metal contact plate • Sensor mounted outside the working area 2x Side Channel Blowers • Max. power consumption: 7.5 kW • Maximum airflow: 650 m³/h • Rated voltage: 400 V • Rated current: 14 A • Pressure: 39,500 Pa

Condition: used, Year of construction: 1999, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,360 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 15,000 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, type of input current: three-phase, torque: 57 Nm, overall weight: 15,000 kg, Equipment: rotational speed infinitely variable, Initial commissioning: 1999 Control: Heidenhain TNC430 PA with portable hand control unit Working ranges X-axis approx. 3,000 mm Lsdpfsx Ifdkox Ah Ushr Y-axis approx. 2,360 mm Z-axis approx. 1,000 mm A-axis ±110° C-axis ±300° Clamping table Length x Width x Height: approx. 4,500 x 2,000 x 400 mm Longitudinal T-slots 18H12 T-slot spacing 250 mm (Shown zero-point clamping plates and additional clamping devices are not included in the scope of delivery!) Milling head Spindle power: 18 kW Spindle speed: max. 15,000 rpm Torque: 57 Nm Tool holder: HSK 63 F Tool clamping: hydraulic Linear axis drives Feed rate X, Y, Z axes: approx. 20 m/min Connection data Power requirement: approx. 20 kW Frequency: 50 Hz Voltage: 400 V Main fuse: approx. 63 A Dimensions, weights Machine footprint without control cabinet: approx. 6,000 x 3,500 mm Required height: approx. 4,050 mm Total weight: approx. 15,000 kg Additional equipment - 12-position tool changer - External minimum quantity lubrication - TT140 touch probe Condition of the machine Fully operational, machine is supplied without enclosure and must be enclosed by the purchaser in accordance with CE regulations.

Condition: ready for operation (used), Year of construction: 2000, Main Drive Spindle speed range 45000 Spindle motor power 6 kw Movement X-Axis Movement 2450 mm Y-Axis Movement 1400 mm Lhsdpfx Aex D E U Sjh Uor Z-Axis Movement 800 mm This 5-axis GEISS FZ 2000 x 1000 was manufactured in 2000. It features a robust CNC milling machine capability with X-axis travel of 2450 mm, Y-axis of 1400 mm, and Z-axis of 800 mm. The milling spindle supports a maximum speed of 45000 rpm with a power of 6 kW. Consider the opportunity to buy this GEISS FZ 2000 x 1000 CNC milling machine. Contact us for more information about this machine. Application Types Milling

Condition: new, Year of construction: 2025, functionality: fully functional, feed length X-axis: 300 mm, feed length Y-axis: 200 mm, feed length Z-axis: 350 mm, spindle speed (max.): 2,200 rpm, spindle speed (min.): 80 rpm, total height: 1,550 mm, total width: 1,410 mm, total length: 11,150 mm, overall weight: 500 kg, The EMCOMAT FB-3 L is ideal for use in tool and mould making, in apparatus and prototype construction and in small series production. It has also proven itself many times in schools and training workshops. As the smallest machine in the EMCO milling machine range, the FB-3 L already meets the highest demands for accuracy and flexibility - and that at an unbeatable price-performance ratio. Travel in X/Y/Z 300 / 200 / 350 mm Distance spindle nose table 80 - 430 mm Clamping surface 600 x 200 mm (rigid angle table) Lhjdpfx Aodtm Ahoh Usr Max. table load table load 50 kg (rigid angle table) Speed range 80 - 2200 rpm Power 1,4 kW Tool holder SK30 DIN2080

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, General Information Machine Type: Vertical Machining Centre, Travelling Column Control Unit (CNC): MAZATROL Fusion 640M Year of Manufacture: 2003 Number of Axes (Controlled): 3 (Standard), 4 (Optional with rotary table) Travels and Working Area X-Axis Travel (Longitudinal): 1740 mm Y-Axis Travel (Cross): 760 mm Z-Axis Travel (Vertical): 660 mm Table Length: 2000 mm Table Width: 760 mm Maximum Workpiece Weight (Table Load): 1400 kg Spindle and Performance Spindle Taper: SK 40 (or ISO/BT 40) Maximum Spindle Speed: 12 000 min$^{-1}$ (rpm) Main Spindle Motor Power: 18.5 kW (Kilowatts) (Often a 10-min rating, continuous power may be lower) Lsdpfx Ahsx Eznto Ushr Rapid Traverse Rate (X-Axis): Up to 42 m/min (Metres per minute) Rapid Traverse Rate (Y/Z-Axes): Up to 36 m/min (Metres per minute) or 42 m/min (depending on configuration) Cutting Feed Rate: Up to 36 000 mm/min Tool Changer (ATC) Tool Magazine Capacity: 30 tools (Standard), 48 tools (Optional) Maximum Tool Weight: 8 kg Maximum Tool Length: 350 mm Maximum Tool Diameter (with adjacent tools): 80 mm Maximum Tool Diameter (without adjacent tools): 110 mm Machine Dimensions and Weight Machine Length (L): Approx. 4450 mm Machine Width (W): Approx. 3460 mm Machine Height (H): Approx. 3100 mm Machine Weight: Approx. 11 500 kg (11.5 tonnes) Coolant Tank Capacity: Approx. 450 l (Litres) Total Power Requirement: Approx. 46.7 kW Air Pressure Required: 5 - 9 bar

Condition: used, Year of construction: 2004, Deckel Maho DMU 70 eVolution Year of manufacture: 2004, Operating hours: 68,400 h, Spindle hours: 25,024 h Heidenhain TNC 530, SK 40 tool holder, 5-axis swiveling table Travel paths 500 mm x 700 mm, internal cooling, chip conveyor, W + W filter system Filter system also from 2004, model EL-FI 1000, coolant tank capacity 900 l _____ Our general terms and conditions apply; additionally, the seller is not liable for typographical or data transmission errors. The visual appearance of the offered items corresponds to their age and the pictures shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to businesses and without any guarantee. Lhedpfstvfpcjx Ah Uor

Condition: used, Year of construction: 1990, x-travel 450 mm y-travel 400 mm z-travel 400 mm control Heidenhain 355 Lhodpfx Aepxrkneh Ujr total power requirement 4 kW weight of the machine ca. 2,4 t

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 8105, Universal milling machine 1300 KOMBI Lhedpfx Ahox Ezaij Uer

Year of construction: 1994, condition: ready for operation (used), General Data Machine weight 12000 kg Control Unit Brand HEIDENHAIN Model TNC415 Lhodpfx Ahsx D Iaqo Uer This 3-axis Zayer ZF 2000 gantry milling machine was manufactured in 1994. It features a robust table clamping surface of 2000 × 800 mm, with longitudinal, transverse, and vertical travels of 1703 mm, 803 mm, and 863 mm respectively. It supports a maximum table load of 6000 kg and offers rapid traverse rates up to 15,000 mm/min. If you are looking to get high-quality milling capabilities, consider the Zayer ZF 2000 machine we have for sale. Contact us for more information. Application Types Milling

Condition: like new (used), Year of construction: 2018, Manufacturer: AXA Type: VCC50 Year of manufacture: 2018 read operating hours (h): 6,332, Serial no.: 87844, X travel: 1,350 mm Y travel: 750 mm Lhedpfoh Eg Ebox Ah Usr Z-travel: 850 mm distance table - spindle nose: 180 - 1.030 mm B-axis additional C-axis (conversion to A-axis theoretically possible), rapid traverse (X/Y/Z): 25/25/20 m/min surface of clamping table: 2.050x850 mm max. table load: 800 kg/m² 5 tN tool changer 22-fold tool holder SK 50 max. tool length: 400 mm max. tool weight: 15 kg max. feed force: 9.000 N main spindle: 6.000 rpm spindle arrangement: vertical control SIEMENS 840 D SL full protection cabin with sliding door swivel spindle Chip conveyor NC rotary table RTA4S-630 2 clamping jaws Paper belt filter system oil mist extraction electr. handwheel machine weight: 17.500 kg machine dimensions: 2.600 x 2.400 x 3.100 mm

Year of construction: 1998, condition: ready for operation (used), General Data Measurements width 5100 mm Measurements depth 10500 mm Measurements height 4900 mm Machine weight 51000 kg Control Unit Brand SIEMENS Model SINUMERIK 840D Lsdpfx Ajx D Hcwsh Ujhr Additional Equipment Automatic Tool Changer: Included / Number of Places in the Magazine: 90 / Max. Tool Diameter: 125 mm (300 mm with free secondary positions) / Max. Tool Length: 450 mm/ Max. Tool Weight: 30 kg /Tool Change Time: Approx. 5 sec Compressed Air Connection / Air Volume: 6 bar - 5 m³/h / Nominal Voltage: 3 AC 400 V / Control Voltage: DC 24 V / Connected Load: Basic machine 65 kW Cooling Lubricant Supply and Filter System: Included / Tank Capacity: 1500 l / Pump for External Cooling: Q= 20/40/60 l/min switchable / Pump for Internal Cooling: Q= 35 l/min at 50 bar Work Area Guard with Lighting: Included / Set of Chip Conveyors: Included, with scraper belt type, discharge height 1000 mm This 4-axis MIKROMAT 20V gantry milling machine was manufactured in 1998. Ideal for precision milling, it offers robust construction and reliable performance. Consider the opportunity to buy this MIKROMAT 20V gantry milling machine. Contact us for more information. Application Types Milling