Used Tandem Press Brake for sale (43,267)

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Iisdow Iq Ugspfx Ag Njh Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Condition: excellent (used), Year of construction: 1998, pressing force: 125 t, Hydraulic press brake Fab. EHT Typ. VARIOPRESS 125-3550 Year 1998 Technical data Make: EHT Type: Variopress 125-3550 Year of construction: 1998 Capacity: 125 t Effective length: 3550 mm Machine column: 2550 mm Projection: 300 mm Stroke: 240 mm Installation height: 640 mm Oil volume 250 L Dimensions: approx. L 3.90 x W 1.80 x H 3.00 m Weight: approx. 12 t Equipment - Control system: Cybelec DNC 80 2D graphics - Automatic upper tool clamping - Lower tool clamping 90mm and 13mm - controlled axes: Y1, Y2, X1, X2, R, Z1, Z2 - motorized crowning - 6 x V block die length 3,500, segmented: with V12/30°, V40/80°, V24/80°, V10/30°, V24/30°, V16/30° - Punch straight, H 350mm / approx. 70°, length 3060 mm, segmented All data without guarantee. Iijdpfxjr Epr Us Ag Noh A demonstration under power is possible at any time in our exhibition hall.

Condition: used, Year of construction: 2004, machine/vehicle number: P020504, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Delem, controller model: DA-66W, bending force (max.): 130 t, working width: 3,150 mm, stroke length: 350 mm, throat depth: 500 mm, distance between stands: 2,600 mm, installation height: 550 mm, operating speed: 10 mm/s, reverse speed: 115 mm/s, number of axes: 6, table height: 950 mm, type of crowning: CNC-controlled, oil tank capacity: 160 l, travel distance X-axis: 500 mm, back gauge adjustment: CNC-controlled, back gauge speed R-axis: 100 mm/s, back gauge travel distance R-axis: 160 mm, overall weight: 13,500 kg, total length: 2,300 mm, total width: 4,000 mm, total height: 3,100 mm, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, lower tooling, safety light barrier, upper tooling, Offered Machine: Used CNC Hydraulic Press Brake Manufacturer: CR Electronic Model: GOLD 130/31 Year of manufacture: 2004 Control: Delem DA-66W (8-axis capable) Condition: used, fully functional (Z-axes currently out of service, see below) Technical Specifications: Iodpfsw A Rggjx Ag Njih - Press force: 1,300 kN (130 t) - Bending length: 3,100 mm - Distance between uprights: 2,600 mm - CNC-controlled axes: Y1, Y2, X, R, Z1, Z2 (Note: Z1 and Z2 are currently electronically out of service – new servo drives required. Manual movement possible.) - Stroke: 350 mm - Installation height: 550 mm - Throat depth: 500 mm - Backgauge (X): 600 mm - Table height: 950 mm - Working speed: 10 mm/s - Return speed: 115 mm/s - Motor power: 11 kW - Operating pressure: 275 bar - Weight: approx. 13,500 kg Equipment & Features: - CNC-controlled hydraulic crowning - System tool holders top & bottom - Manual quick clamping of upper tools - Laser optical finger guard (safety light curtain) - PLC-supported diagnostic system - 2 support arms with quick adjustment - Operating manuals available - CE compliant Including accessories: - Fully equipped tool cabinet - Upper tool 88°, full machine length - Upper tool 35°, full machine length - Round bending upper tool - V8 T-die, full machine length - V12 T-die, full machine length - Flattening die, approx. 2,000 mm length Condition / Remarks: - Machine is in well-maintained condition, currently connected - Inspection and test run under power possible on site - Z1/Z2 currently not operational – new servo drives required - Machine is being replaced due to a planned modernization involving the acquisition of a new press brake. Price: €26,500 net (plus VAT) Negotiable for quick and straightforward purchase.

Condition: excellent (used), Year of construction: 1998, Year of manufacture: 1998 Model: HÄMMERLE BM 200 - 4100 Catalog number: 11803-37 Serial number: 590 097 Isdpfxewn Hfio Ag Noih Pressure: 2000 kN Working length: 4100 mm Max. stroke: 400 mm Reach: 250 mm Weight: 18,900 kg + Tools

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: 10883, working width: 3,550 mm, stroke length: 250 mm, pressing force: 130 t, operating pressure: 310 bar, TECHNICAL DETAILS Pressing force: 130 t Bending length: 3,550 mm Table width: 120 mm Column width: 3,050 mm Installation height: 510 mm Throat: 320 mm Stroke: 250 mm Working height: 900 mm Slide speed, empty down: 120 mm/s Slide speed, full press: 11.5 mm/s Slide speed reduced: preselectable Slide speed up: 100 mm/s Control & Axes Control: Cybelec DNC 80 Axes: Y1, Y2, X, R MACHINE DETAILS Machine weight: approx. 12,000 kg Iedpfxsxf Au Eo Ag Neih Space requirement: approx. 4,050 x 2,100 x 2,850 mm Operating pressure: 310 bar Oil capacity: 250 l EQUIPMENT - Die shifting with handwheel - 4 stop fingers - Hydraulic WILA punch clamp - Hydraulic AMADA die clamp - 2 support arms - Safe two-hand/foot operation - Various punches and dies

Condition: good (used), Year of construction: 2018, CNC press brake Manufacturer: SMD Yawei Model: PBB-630/6200 Year of manufacture: 2018 CNC control: CYBELEC ModEva 15 Iijdpfxerivu So Ag Njh Pressing force: 6,300 kN Working width: approx. 6,200 mm DSP-Laser-TX Connected load: 400 V / 95 kVA

Condition: good (used), functionality: fully functional, Year of construction: 1995, operating hours: 32,518 h, control type: CNC control, pressing force: 250 t, Bending length [mm]: 3550 Iijdpfxoxcmwrs Ag Noh Pressing force [t]: 250 Control: Cybelec DNC 906 PS A Operating hours [h]: 32,518 - Hydraulic quick clamping for punch and die - Hydraulic crowning system via CNC - 2-axis CNC backgauge (X and R) - 4 manually adjustable backgauge fingers - 2 movable bending aids - Comprehensive tooling package

Year of construction: 1992, condition: excellent (used), Hydraulic press brake Fab. DARLEY Type. EHP 150 - 43/37 Very good condition, year 1992 Technical data Make: DARLEY Iisdpfeh U A Ibox Ag Njh Type: EHP 150 - 43/37 Year of manufacture: 1992 working length: 4300 mm power: 150 t distance machine column: 3700 mm ram stroke: 175 mm Engine power: 11 kW Dimensions: approx. L 4.7 x W 1.6 x H 3.1 m (transport height 2.85 m) Weight: approx. 16 t Equipment: - Control Delem DA 58 - Block die: V14, V60, V40, V24, V12, V30, V22, V10 - Punch straight height 195 mm, segmented - 2. punch cranked height 195 mm, segmented, length 4.000mm - controlled axes: Y1, Y2, X, R, Z - motorized crowning - 2 support arms - operating instructions + test books All data without guarantee. The machine is in a very good condition. A demonstration under power is possible at any time in our exhibition hall.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,650 h, Control Unit Brand AMADA Model CNC 3i Main Drive Pressing force 100 tons Bending length 3000 mm Number of axis 8 Iedjxbii Ispfx Ag Nsih Additional Equipment Accessories: Includes tool package by arrangement Optional Tools: 2x 830 mm prisms and 2x 830 mm bending beams R5 This 8-axis AMADA HFE 3L 1003 press brake was manufactured in 2017. It features a pressing force of 100 tons and a bending length of 3,000 mm, complemented by an Amada CNC 3i control system. With only 3,650 operating hours, it is in excellent condition, fully functional, and ready for operation. Consider the opportunity to buy this AMADA HFE 3L 1003 press brake. Contact us for more information about this machine. Application Types Bending

Condition: excellent (used), Year of manufacture: 1991 Model: ITPS III Serial number: ITPS 80C 25 P1C226 Maximum pressing force: 1800 kN Iijdpfswq Dpqox Ag Nsh Working stroke: 115 mm Power supply: 415 V, 50 Hz, 3 phases Rated current: 119 A Installed power: 18.5 kW Machine weight: 4940 kg Inventory number: 9.14 Control: Delem DA-65R

Condition: excellent (used), Year of construction: 2009, Technical Data: Working length: 3230 mm Distance between uprights: 2690 mm Pressing force: 230 tons CNC control: TASC 6000 Number of controlled axes: Stroke: 445 mm Throat depth: 420 mm Table width: 140 mm Working height: 1065 mm Crowning: CNC-controlled Hydraulic tool clamping Die shifting CE marking Iiodpfxexdt U Hj Ag Neh Motor power: 30 kW Dimensions (L x W x H): approx. 4150 x 2350 x 3100 mm Weight: approx. 17 tons Accessories: 2 pcs. bending aids Electronic pressure gauge Measuring system with centrally mounted glass scales and temperature compensation Safety device BendGuard Network capability Support arm with height adjustment Condition: Overall in very good condition Little used, 35,000 hours The seller is not liable for typographical or data transmission errors. The machine is visually, technically, and regarding wear in accordance with its age; used machines are sold without any warranty.

Condition: good (used), functionality: fully functional, Year of construction: 1997, operating hours: 47,122 h, machine/vehicle number: 887034, control type: CNC control, degree of automation: automatic, actuation type: electric, bending force (max.): 170 t, working width: 4,000 mm, input voltage: 400 V, input current: 42 A, input frequency: 50 Hz, Equipment: documentation/manual, european tool clamping system, The machine is fully operational. Functionality can be checked. If you have any questions, please contact us. Iijdpfx Agsxm Rlns Nsh

Condition: excellent (used), functionality: fully functional, Year of construction: 1998, control type: CNC control, controller manufacturer: Cybelec, bending force (max.): 60 t, working width: 2,550 mm, number of axes: 6, type of crowning: CNC-controlled, Equipment: CE marking, documentation/manual, lower tooling, safety light barrier, upper tooling, High Quality, fully serviced and well maintained used Edwards Pearson pr6 cnc pressbrake for sale Edwards Pearson PR6 60 / 2550 CNC Pressbrake 2.5metre x 60ton / 2550mm Iodpfxow I Dkns Ag Njih 4 axis back gauge – z1, z2, x and r axis – 6axis in total Crowning for your thinner gauge steels Cybelec cnc control Machine in good working condition including a good selection upper & lower Pressbrake tooling Serviced by Bystronic uk We can deliver to your works, install and offer tuition with your operators as well as quote new tooling to make your sheet metal products on this machine.

Condition: excellent (used), Year of construction: 2005, pressing force: 50 t, Hydraulic press brake Fab. AMADA Typ. HFP 50-20 Year 2005 Technical data Make: AMADA Type: HFP 50-20 Year of construction: 2005 Effective length: 2090 mm Capacity: 50 t Passage upright: 1,665 mm Stroke: 200 mm Projection: 400 mm Installation height: 470 mm Motor power: 6 kW Dimensions: approx. L 2.95 x W 1.60 x H 2.45 m Weight: approx. 4.8 t Equipment Isdpotzcxpefx Ag Nsih - Controlled axles: Y1, Y2, X, R, Z1, Z2 - FIESSLER light barrier at the front - Amada upper tool clamping - CNC control 3D AMNC graphics - Rear safety guard (hinged mesh doors) - Swivel operation - front left - Tools: o Upper tool straight, R 0.8mm, H 117mm, length 2,000 mm o Bottom tool V10/88°, length 2,000 mm All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: reconditioned (used), functionality: fully functional, LVD 4000 x 200T Press Brake Type PPBL 200/40 Capacity 4000 x 200T Iiedpfx Agjwtmi Eo Neh Maximum stroke 150 mm Weight 13.5T With mobile blade rack

Condition: new, The DURMA AD-S 601000 is a powerful hydraulic press brake that ensures the highest precision and efficiency in sheet metal processing. With a pressing force of 1000 tons and a working length of 6 meters, it is ideal for demanding applications, especially when processing large and thick materials. Technical details: - Model: DURMA AD-S 601000 - Pressing force: 1000 tons - Working length: 6 meters - Control: SKY22 (3D control) - Back stop: 6 axes (X1, X2, R1, R2, Z1, Z2) - Bending aid: AP3-AP4 integrated for optimized handling of heavy workpieces - Condition: As good as new, available immediately Iedpfx Agevwm A Io Nsih Features and advantages: - High bending accuracy thanks to the latest CNC control - Robust construction for a long service life - Flexibility thanks to the 6-axis back stop control - Support for heavy and large sheets thanks to integrated bending aid The machine is available immediately and can be inspected on request. We are happy to provide you with further information or to arrange an appointment.

Condition: excellent (used), Year of construction: 2012, Technical data: Working length: 4100 mm Iiodpfexdt Umjx Ag Neh Distance between uprights: 3550 mm Press force: 300 t CNC control: DELEM EPC-3D Controlled axes: Y1/Y2; X; R; Z1/Z2 Hydraulic tool clamping top and bottom: WILA system CNC crowning Stroke: 550 mm Throat depth: 405 mm Installation height: 620 mm 2 pcs. bending aids Angle measuring system Motor power: 30 kW Laser monitoring Table height: 980 mm Dimensions (L x W x H): approx. 5550 x 2950 x 3400 mm Weight: approx. 24.5 tons Condition: Very good condition The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 1991, Pressing force 1500 kN Working width 3100 mm Isdevy Hd Rjpfx Ag Njih Stroke 200 mm Motor 11 kW Dimensions LxWxH: 2100 x 2000 x 2800 mm Weight 9,600 kg Incl. tools, see PDF

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2009, installation height: 615 mm, pressing force: 320 t, Bending length [mm]: 4420 Press force [tons]: 320 Control system: TRUMPF TASC 6000 Operating hours [h]: 85,406 Hydraulic system on [h]: 30,735 Standard equipment: - Sturdy machine frame as a welded all-steel construction - Press beam with high flexural rigidity - Spherical mounting of the press beam with inclined press beam positioning - Electrohydraulic top-drive with 4-cylinder technology - Proportional valve technology and switchable double pump - Modern block hydraulics with control valves mounted directly on the cylinder - Electronic pressure scale - Measuring system with centrally mounted glass scales and temperature compensation - Manually integrated wedge crowning system in the table - Upper tool clamping system "New Standard Clamping", manual, hardened, self-centering, for vertical tool change - Lower tool clamping with hydraulic clamping, hardened - Programmable lower tool displacement (pneumatic, 2 positions) - Backgauge system, 2-axis, with rack and pinion drive for X and R axes; 2 stop fingers adjustable safely from the front - Machine control: TASC 6000 - Operator console with LCD keypad, footswitch for emergency stop, up, and emergency-off - Safety equipment: integrated side doors and automatic rear roll-up cover - Control cabinet cooling (air-to-air heat exchanger) Iiodpoxb Tyqsfx Ag Nsh - Oil cooler - Network capable - Modern machine design - 4-axis backgauge system - Hydraulic upper tool clamping - CNC crowning - Preparation for ACB Automation BendMaster (150) - Floor track 8,000 mm - Two-sided safety fence

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Cybelec, controller model: DNC 880, bending force (max.): 175 t, working width: 3,050 mm, stroke length: 265 mm, installation height: 530 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, number of axes: 4, table height: 900 mm, type of crowning: CNC-controlled, oil tank capacity: 200 l, travel distance X-axis: 650 mm, back gauge adjustment: CNC-controlled, back gauge travel distance R-axis: 250 mm, overall weight: 11,250 kg, total length: 4,570 mm, total width: 2,360 mm, total height: 2,900 mm, power: 18.5 kW (25.15 HP), Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, electro-hydraulic CNC press brake - Two synchronized cylinders with HIGH PERFORMANCE hydraulic components - Equipped with CYBELEC CNC control unit - DNC 880S - * 2D graphic display for visualization and multi-stage simulation * Graphic 2D programming * User-friendly operation * Automatic bending sequence calculation and collision detection * Extensive product and tool library * Automatic tonnage (pressure) calculation - Swiveling operator panel mounted front right - CNC controlled axes: Y1 + Y2 + X + R + CNC crowning - Upper beam with heavy-duty four-guide system - CNC electric backgauge (X axis) * with 2x manually adjustable backgauge fingers * Adjustment range up to max. 650 mm - CNC electric height adjustment of backgauge (R axis) * Adjustment range up to max. 250 mm - CNC electric table crowning - AMADA/PROMECAM upper tool clamping * incl. segmented upper tool set - AMADA/PROMECAM lower tool holder, incl. die * incl. segmented single-V die (V=20 mm) - FIESSLER LASER safety device at the front - 2x front, movable support arms (sliding system) - Side safety enclosure (pivoting doors) Iisdpfxsxlizxs Ag Noh - Rear safety enclosure (pivoting door) - 1x movable foot switch - Large hydraulic oil tank to maintain low operating temperature - Original operating manual

Year of construction: 1983, condition: used, machine/vehicle number: 28148, pression: 150 t working width: 4500 mm clear support width: 3050 mm support throat: 300 mm rear stop: 1000 mm electrical connection: 380 V, 18,5 kW weight: 14,8 t Iisdob N Evmjpfx Ag Nsh space needed: 4200 x 2000 x 3000/3150 mm

Condition: good (used), Year of construction: 1997, machine/vehicle number: 887043, Offer 24557 Iisdeu T Nknspfx Ag Noh Technical data: - max. working length 4060 mm - column clearance 3680 mm - max. pressing force 1700 kN - max. distance table / ram 385 mm - column projection 410 mm - ram stroke 215 mm - stroke speeds - downward speed idle max. 200 mm/sec - upward speed 135 mm/sec - downward pressing speed 1 to. 11 mm/sec - Total drive power 30 kW - Space requirement approx. W 5600 x H 3000 x D 2400 mm - Weight approx. 18000 kg - with: - with 6-axis CNC control DELEM - Two-hand control panel with foot switch - Crowning device - Controlled back stop with height adjustment 5 - 860 mm - Hydraulic upper + lower tool clamping - Die table displacement pneumatically supported

Year of construction: 1992, condition: used, machine/vehicle number: 80076, pression: 400 t working width: 4100 mm clear support width: 3150 mm support throat: 330 mm electrical connection: 400 V, 37 kW weight: ca. 25 t space needed: 4100 x 2300 x 3910/530 mm Iijdpfx Agsbfk Ane Noh

Year of construction: 1990, condition: used, machine/vehicle number: 22752; Lg-Nr. 12106, Technical data: - Pressure capacity 2000 kN - max working width 3100 mm - bar passage 3200 mm - max. outreach 300 mm - max installation height 965 mm - stroke, resp. offset infinitely variable 0 - 400 mm - ram speed forward + backward 100 mm/sec each - Working speed selectable in 9 steps - 1 10 mm/sec - Drive 400 V / 26,5 kW - space requirement approx. W 4400 x H 3500 x D 2200 mm - Weight approx. 18500 kg Iisdpfx Agsbbwzno Nsh - with: - CNC - control CYBELEC ModEva 15S year 2007 - back gauge with 4 controlled pneum. lateral - and height adjustable stop fingers - controlled bending aids in the stop area - Hydr. - pneum. Clamping of the upper tool + - lower tool - mot. Crowning / hydro cushion in the table - laterally movable support arms - E - foot switch - split pointing tool R 1-100 t/m , split die

Year of construction: 1990, condition: good (used), machine/vehicle number: 59502, Lg.No. 22564 Iiedpfein I Nbex Ag Nsh Technical data: - Pressure capacity 150 t - working width 2600 mm - passage between the columns 2100 mm - table width 180 mm - throat 250 mm - installation height 325 mm - Drive 400 V / 7,5 kW - space requirement approx. W 3000 x H 2400 x D 1600 mm - weight approx. 7000 kg - with: - Two-hand control panel with foot switch