Used Tariqul Lathe for sale (5,494)

Condition: used, Year of construction: 2000, . max. swing diameter 460 mm hollow 66 mm digital . multifix . centre distance 1000 mm feed: . weight of the machine ca. 1,8 t +++++ Chodpfewhqzujx Adajd Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), Year of construction: 1984, 6 spindles Chsdpfx Adov R U D Tjajd Tapping with electronic limit stop Hexagonal punching Calibration Pick-up device Many accessories With IEMCA PRA 40/42 F bar loader Includes STEIMEL chip removal, box conveyor, and 24/7 production

Condition: used, Year of construction: 2001, functionality: not functional, The issue is that the machine takes a very long time to start up. Year: 2001 Control unit: Mazatrol Fusion 640 MT Axes: 5-axis (X, Y, Z, C, B) Turning capacity: Maximum turning length: 1,500 mm Maximum turning diameter: 660 mm Maximum swing over bed: 700 mm Cedpfxoxt R Dkj Adajhd Main spindle: Maximum speed: 4,000 rpm Spindle motor power: 22–30 kW Chuck size: 10” or 12” (depending on configuration) Milling spindle / B-axis head: B-axis travel: ±240° Y-axis travel: ±70 mm Maximum milling speed: 12,000 rpm Tool taper: HSK-63 or BT-40 Tool magazine: 40-position automatic tool changer (ATC) Maximum tool length: 300 mm Maximum tool weight: 8 kg Equipment included: Tailstock Steady rest Coolant system Chip conveyor Fully enclosed guarding Machine weight: approx. 12,000–13,000 kg

Condition: new, Year of construction: 2025, functionality: fully functional, spindle bore: 52 mm, center height: 200 mm, turning length: 1,000 mm, spindle speed (max.): 2,240 rpm, spindle speed (min.): 50 rpm, Centre height: 200 mm. Swing over cross slide: 235 mm. Distance between centers: 1000 mm. Spindlebore: 52 mm. RPM.: 50-2240. Width of bed: 320 mm. Tail stock taper: 4 Motor: 4 kW. Cedpfxsxug R As Adaohd Year: 2025 Country of origin: Bulgaria. Size (L x W x H): 2350 x 1050 x 1600 mm. Weight: 1590 kg. Ø200mm. Bison selfcentering chuck, Amestra quick tool changer, movable bedway stop, mechanical clutch and rapid movement of carrige by joystick.

Condition: as good as new (ex-display), The NTS 320 CNC is a robust CNC flat bed lathe designed for precision and performance in the CNC Flat Bed Lathes category. This impressive machine features a spacious working area, a powerful spindle drive, and is equipped with the advanced Siemens 808D control system, which makes it user-friendly for both beginners and seasoned machinists. The NTS 320 CNC combines state-of-the-art technology with traditional lathe virtues, utilizing thick-walled cast iron for stability. Its automatic tool turret accommodates six tools, enhancing both flexibility and productivity during operations like turning, drilling, and threading. Additionally, features such as the hydraulic tailstock and a powerful coolant system ensure optimal performance and ease of use. With a maximum turning length of 450 mm and a turning diameter over the bed of 360 mm, this machine is perfect for extensive single-piece production as well as efficient small series machining. Enhance your workshop capabilities by ordering the NTS 320 CNC from KNUTH today. Csdpfxow Idtve Adaohd

Condition: used, Year of construction: 1999, turning diameter 500 mm turning length 1500 mm control Manual Plus spindle bore diameter 70 mm turning speed range 8 - 2800 U/min transmission ratio 3 swing diameter over face slide 290 mm spindle head DIN 55027 Gr 8 tool holder Typ C quill stroke 180 mm weight of the machine ca. 3,2 t Csdpfx Adsub Amljashd dimensions 3,0 x 1,8 x 1,8 m Description of the machine: This machine is suitable for turning chucked and shaft workpieces. The commercially available steel grades, casting, copper, aluminium, brass, gunmetal and cuttable plastic can be turned on this machine. --> Concept of the N.E.F. plus The machine si supplied as standard with the following described equipment - Cycle control - AC-Main drive - Compund slide rest with AC drive and operating panel - Tailstock traversable using slavingunit, manualy clamped, including following centre point - Coolant unti - Chip protection hoods, manually actuated - Protection hood for chuck - Fast change tool holder Hahn & Kolb Multifix C - Reduction collar for turning spindel accessories according to pictures: - 2 STK steady rests - various clamping jaws - Hahn & Kolb Multifix type C - Various torsion bar holders Technical data: Working area: - Circulation diameter over bed: 500 mm - Circumferential diameter above the radial slide: 285 mm - Chuck Ø: 250(315) mm - Face slide: 260 mm - Distance between centres: 1000/1500 mm Turning spindle: - Spindle head DIN 55027: Size 8 - Hole diameter of the spindle: 70 mm - Hollow taper of the spindle nose: 80 metric - Spindle diameter in front bearing

Year of construction: 1966, condition: used, bed bridge ja 579 mm centre distance 2200 mm Chjdpfjrxxb Nsx Adasd weight 3 t

Condition: excellent (used), Year of construction: 2015, travel distance X-axis: 1,105 mm, Tooling package  Chip conveyor Samchully 3 chuck 400 mm with jaws Max. turning Ø: 790mm X-Axis: 352mm Z-Axis: 1105mm Spindle bore: 116.5mm Speedrange: 2000Rpm Spindle power: 37kW ATC / revolver: 10 Csdpfx Aewyun Asdajhd Speed live tools:4000Rpm Power live tools:25kW Chip conveyor: Yes Tool eye: Yes Pinole taper: 6Mk Stroke pinole: 120mm Quill Ø: 120mm Workpiece load: 1700 Length: 4600mm Width: 2056mm Height: 2195mm Weight: 11050kg

Condition: ready for operation (used), YEAR OF MANUFACTURE: 1963 (see attached documents for technical data) Swing diameter: 600 mm Turning length: 1000 mm Equipment: - Three-jaw chuck Ø 250 mm Cjdexcw Axepfx Adaehd - Four-jaw chuck Ø 250 mm - Tailstock center - Quick-change drill chuck MK5 - Documentation

Condition: used, functionality: fully functional, spindle bore: 51 mm, center height: 200 mm, turning length: 1,000 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 23 rpm, Turning diameter in gap: 600 mm, overall weight: 1,750 kg, Centre height: 200 mm. Swing in gap Ø: Ø600 mm. Distance between centers: 1000 mm. Spindlebore: 51 mm. RPM.: 22,4-2000. Tail stock taper: 5 Motor: 5,5 kW. Digital readout: Sony LG 10 (X & Y). Country of origin: Chech Republic. Size (L x W x H): 2600 x 1300 x 1750 mm. Weight: 1750 kg. With gap, Algra quick tool changer and rapid movement by push button. Very good condition. Chjdpfx Adjxugh Ueaod All our machines are tested and serviced before delivery.

Condition: excellent (used), functionality: fully functional, Weiler Primus lead and pull spindle lathe with 2 axis digital readout Heidenhain from training workshop !!! Technical data: >> Year of construction approx. 1985 Codpfx Adju Afqloaehd >> center height 120 mm >> center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle clearance 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 2-axis digital readout from Heidenhain >> 1 new three-jaw chuck 125 mm with 2 sets of jaws >> collet chuck device new with collets new from 3 mm to 25 mm 1 mm increasing >> Mulifix size A with 3 steel holders >> Back plate To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs smoothly even at high speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.

Condition: like new (used), Year of construction: 2022, operating hours: 10 h, functionality: fully functional, turning diameter over cross slide: 430 mm, spindle bore: 80 mm, turning length: 1,500 mm, turning diameter: 430 mm, quill stroke: 150 mm, quill diameter: 70 mm, spindle speed (min.): 3,000 rpm, bed width: 350 mm, total length: 1,900 mm, total width: 1,500 mm, total height: 1,600 mm, spindle motor power: 11 W, overall weight: 3,500 kg, rotational speed (min.): 1 rpm, rotational speed (max.): 3,000 rpm, three-jaw chuck diameter: 250 mm, Equipment: rotational speed infinitely variable, The Seiger SLZ 420K is a conventional lathe known for its robust cast-iron bed, precise slideways, and digital support features. It is well-suited for single-part production, repairs. Dimensions and capacities • Swing over bed: 430 mm • Swing over cross slide: 220 mm • Center distance: 1,500 • Bed width: 350 mm Spindle and drive • Spindle bore diameter: 80 mm • Spindle head: DIN 55027, Size 6 • Spindle diameter in front bearing: 110 mm • Main drive: 11 kW Chedjxr U E Aepfx Adasd • Speed range: 1–3,000 rpm Tailstock • Quill diameter: 70 mm • Quill stroke: 150 mm • Morse taper: MK 5 Control and features • Display: Heidenhain Positip 8016 digital display • Linear scale: Heidenhain linear scales on the X- and Z-axes • Feed rates: V-constant and controllable feed rates via a potentiometer • Rapid traverse: Functionality in both the X- and Z-axes • Handwheels: Mechanical handwheels for manual operation • Bed: High-quality, torsion-resistant cast-iron bed with hardened and precision-ground slideways The Heidenhain Positip 8016 is a digital measuring instrument with a touchscreen, suitable for manually operated milling, drilling, and turning machines. The display offers various functions to increase productivity and accuracy. Key features • Touchscreen operation: The device is equipped with a robust 12.1-inch color TFT touchscreen, which can also be operated while wearing gloves. • Multiple axes: The system can control up to six axes, four of which are standard linear, angular, or coupled axes, and two are optional. • Extensive functions: The Positip 8016 includes features such as drilling patterns, tool radius compensation, a cutting data calculator, and the ability to save positions. • Distance-to-zero function: This function helps you move quickly and accurately to the next position by working towards a zero value. • Programmable: Recurring machining steps can be saved as a program, which speeds up the production of small batches. • Interface: The display features interfaces such as Ethernet and USB for importing and exporting data. • Robust design: The device is specially designed for use in workshop environments and has a sturdy aluminum housing with passive cooling.

Condition: used, Year of construction: 1997, turning diameter x mm turning length x mm control x turning diameter x mm turning length x mm swing diameter over bed slide x mm Chedeudc Uhepfx Adasd total power requirement x kW weight of the machine ca. x t

Condition: used, Year of construction: 2006, bar material dia. 20 mm spindle passage 22 mm turning length 205 mm Control Siemens Yaskawa turning speeds 500-10.000 U/min c-axis 0,001 ° gripping station 20 mm turning length 30 mm positive location each 0,001 ° Number of tools 10 fest / fix St. total power requirement 2,2/3,7 kW Chedpoxukr Dofx Adasd weight of the machine ca. 3,5 t dimensions of the machine ca. 2,6 x 1,2 x 1,8 +FMB m CNC sliding head lathe Star Ecas 20, built in 2006, with FMB minmag 18 loading magazine, in good condition, from the medical technology sector. Two machines of the same type and year of manufacture are available.

Condition: excellent (used), functionality: fully functional, Weiler Primus lead and feed screw lathe from training workshop !!! Technical data: >> Year of construction approx. 1985 >> center height 120 mm >> center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle clearance 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg Csdsu Aftgspfx Adaohd >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck 160mm with 1 set of jaws >> 1 new three-jaw chuck 125mm with 2 sets of jaws >> Collet chuck device with collets from 1 mm to 20 mm 1 mm increasing >> Mulifix size A with 3 steel holders >> Fence >> Change wheels To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs smoothly even at high speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus guide and spindle lathe from the training workshop!!! Technical data: >> Year of manufacture approx. 1985 Machine no. 1191 >> Center height 120 mm >> Center width 430 mm Cedpfxevtp Ede Adajhd >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle passage 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 x three-jaw chuck 125 mm with 2 sets of jaws >> Collet device with Collets 18 pieces >> Mulifix size A with 3 steel holders >> Stop >> Electric spindle protection About the machine: A Weiler Primus guide and pull spindle lathe is offered in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs quietly even at high speeds. The Primus was in a training workshop. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site with power on and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus GS guide and feed spindle lathe in very good original condition! Technical specifications: >> Year of manufacture approx. 1992 Machine no. 4549 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle bore 23 mm >> Short taper spindle head DIN 4 >> Tailstock MT 2 >> Feed rates from 0.03 to 0.15 mm/rev >> Possible thread sizes: metric, inch, module, and diametrical pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> New collet chuck system, new collets from 3 to 25 mm >> 1 piece Three-jaw chuck with 2 sets of jaws >> Mulifix size A with 2 tool holders About the machine: Offered is a Weiler Primus GS guide and feed spindle lathe in very good original condition. The machine is fully functional. All slides run very smoothly and evenly. The bed guides are in excellent condition. The Weiler runs very quietly even at high speeds. The Primus was used in a training facility. This newer generation of Weiler lathes is very user-friendly and can produce surfaces that look as if they were ground. Take advantage of the opportunity to view this machine on-site with power on and see for yourself its condition. Chsdjwkh Abepfx Adaed

Condition: excellent (used), functionality: fully functional, Weiler Primus GS lead and feed screw lathe 3 axis digital readout Easson- ES8 from training workshop Super condition !!! Technical data: >> Year of construction approx. 1990 Machine no. 3768 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle clearance 23 mm >> Short taper spindle head DIN 4 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 3-axis digital display from Easson ES8 >> collet chuck device from 1 to 20 mm collets 1 mm rising with holder and draw tube >> 1 three-jaw chuck with 2 sets of jaws Chjdpjvkfhpofx Adasd >> 1 four-jaw chuck with 2 sets of jaws >> Mulifix size A with 3 steel holders >> Bed stop >> Turning device To the machine : We are offering a Weiler Primus lathe built around 1990 in excellent condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The bed guides are in very good condition. The Weiler runs smoothly even at high speeds. The machine comes from a training workshop of a large company. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus LZ/G lead and feed screw lathe in special paint finish light gray !!! Technical data: >> Year of construction ca.1990 Machine-No.3150 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> spindle passage 23 mm >> Short taper spindle head DIN 4 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck NEW 125mm with 2 sets of jaws >> Mulifix size A with 2 steel holders Csdsvivmyjpfx Adashd >> collet chuck device new with collets from 3 to 26mm 1 mm increasing new >> To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run smoothly and evenly. The bed guides are in very good condition. The Primus was used in a training company. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see the condition for yourself.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Weiler precision lathe model Condor B, lead and feed screw lathe with brand new K&C 3-axis digital readout, CE compliant! Technical data: >> Machine No. 2442, year of manufacture 1997 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Camlock spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module and diametral pitch threads possible >> Metric thread pitches: 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake, selectable >> Length: 1.83 m, height: 1.29 m, depth: 0.88 m Chjdpfoxcuazox Adaed Equipment and features: >> New K&C 3-axis digital readout, 12-month manufacturer's warranty, supplied with operating manual Features: mm/inch switching, selectable ABS/INC coordinates, value halving function, reference mark, tool memory for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 x brand new 160 mm 3-jaw chuck with 2 sets of jaws >> 1 x 200 mm 4-jaw chuck with 1 set of jaws >> New collet chuck system and new collets from 3 to 25 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Machine feet Safety features: electronic spindle guard, 2 emergency stop buttons, changewheel box with safety interlock, spindle brake About the machine: Offered here is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The new K&C 3-axis digital readout makes work easier and more precise. The machine has been electrically and mechanically checked by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to inspect and test this machine under power on site.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Weiler Primus VC Precision Centre Lathe 3-axis Digital Readout K&C NEW with VC Drive, Stepless Speed Adjustment, and CE Compliance, Very Good Condition Technical Data: >> Year of manufacture: 2003, Machine No. 646 >> Centre height: 140 mm >> Centre distance: 500 mm Chjdpfx Adew Idlljaod >> Spindle speeds: up to 4000 rpm, stepless >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock Morse taper 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Thread types: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: from 0.25 to 8 mm >> Weight: approx. 800 kg >> Spindle brake can be activated >> Machine dimensions approx. 1.4 m x 1.55 m x 0.95 m Accessories and Equipment: >> 3-axis Digital Readout K&C NEW >> Collet chuck system with collets from 3 to 26 mm, new, 1 mm increments, NEW >> 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 toolholders >> Electric chip guard >> Machine feet >> Splash guard About the Machine: This offer is for a Weiler Primus VC lead and feed screw lathe, built in 2003 and in very good original condition. A very nice lathe with VC drive and stepless spindle speed control. The digital readout and scales from K&C are new. This newer generation of Weiler lathes is very user-friendly and can produce ground-like surface finishes. The K&C digital readout makes operation even easier and more precise. Take the opportunity to inspect this machine under power on site and be convinced of its condition.

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Weiler Precision Lathe Model Condor 81 Lead and Feed Spindle Lathe with 3-Axis Digital Display from K&C NEW Technical Data: >> Year of manufacture 1987 Machine No. 87 835 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: Metric, Inch, Module, and Diametral-Pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Equipment: >> 3-axis digital display from K&C new, 12 months manufacturer's warranty with operating manual Functions: Switch mm/inch, coordinate selection ABS/INC, halving of display value, reference mark, tool programming 200 pcs, taper calculation, radius/diameter, quick zeroing, reversing of count direction >> 1 piece 3-jaw chuck 160 mm NEW, 2 sets of jaws >> 1 piece 4-jaw chuck 160 mm, 1 set of jaws >> Collet equipment and new collets from 3 to 26 mm in 1 mm increments >> Multifix size B with 2 tool holders Csdpswrmuxofx Adashd >> Bed stop >> Electronic spindle guard >> Rear panel >> Coolant system >> Machine feet About the Machine: A used Weiler Condor 81 in very good condition is offered. The machine is, of course, fully functional and has been completely disassembled and repainted. A very robust and powerful machine. The new 3-axis digital display from K&C makes working even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change was carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test this machine on site under power.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Weiler Center Lathe Model Condor B Guide & Feed Shaft Lathe with 3-Axis Digital Readout by K&C NEW from Training Workshop!! Technical Data: >> Machine No. 91-1814, Year of manufacture: 1991 >> Center height: 165 mm Csdjw Nw Dqepfx Adajhd >> Distance between centers: 750 mm >> Spindle speeds: from 22 to 2,800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet locking >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Threads possible: Metric, Imperial, Module, and Diametral Pitch >> Metric thread leads: from 0.18 to 28 mm >> Weight: approx. 1,100 kg >> Spindle brake switchable >> Dimensions (L x H x D): 1.83 m x 1.29 m x 0.88 m Scope of Delivery and Features: >> NEW 3-axis digital readout from K&C, 12-month manufacturer's warranty with operating manual Functions: mm/inch switch, ABS/INC coordinate selection, display value halving, reference mark, tool programming for 200 items, taper calculation, radius/diameter display, quick zeroing, counting direction reversal >> 1 pc. NEW 160 mm 3-jaw chuck, 2 sets of jaws >> 1 pc. 160 mm 4-jaw chuck, 1 set of jaws >> NEW collet chuck and NEW collets from 2 to 24 mm, incremented by 1 mm >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle safety guard >> Rear splash guard >> Fixed steady rest >> Machine feet Safety features: electronic spindle guard, 2 emergency stop switches, change gear cover with limit switch, spindle brake About the machine: We are offering a Weiler Condor in very good condition. The machine is, of course, fully operational. It is a very robust and powerful lathe. The brand new 3-axis digital readout from K&C makes operation even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test this machine under power at our premises.

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, Weiler Center Lathe Model Condor 81 Lead and Feed Lathe with 3-Axis Digital Readout from K&C NEW Chedpfx Adewb Supoasd Technical Specifications: >> Year of Manufacture 1983 Machine No. 83-067 >> Center height 165 mm >> Center width 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MT 3 >> Feed rates from 0.015 to 0.46 mm/rev >> Possible threads: metric, inch, module, and diametrical pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake can be switched on >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and Equipment: >> New 3-axis digital readout from K&C, 12-month manufacturer's warranty with operating instructions Functions: mm/inch switching, ABS/INC coordinate selection, halving of the display value, reference mark, 200 tool programming, cone calculation, radius/diameter, quick zeroing, counting direction switching >> 1 new three-jaw chuck, 160 mm, 2 sets of jaws >> New collet chuck and new collets from 3 to 26 mm, 1 mm increments >> Multifix size B with 3 tool holders >> Electronic spindle protection >> Rear panel >> Coolant system >> Machine feet About the machine: Offered is a used Weiler Condor 81 in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The new 3-axis digital readout from K&C makes work even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change was also performed. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to view and try out this machine live on-site.

Condition: excellent (used), functionality: fully functional, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with 3-Axis Heidenhain Digital Readout Technical Data: >> Year of manufacture: 1988 Machine No. 88-955 >> Centre height: 165 mm >> Centre distance: 750 mm Chodpfx Adjxu Hlaoaod >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 Size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting capability: metric, imperial, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake can be engaged >> Dimensions: Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Equipment: >> 3-axis Heidenhain digital readout >> 1 pc. new 3-jaw chuck with 2 sets of jaws >> Collet chuck set, collets from 3 to 30 mm, 40 collets, some duplicate sizes >> Multifix size B with 3 tool holders >> Bed stop >> Machine feet >> Drill chuck >> Live centre For Safety: >> Cover for lead and feed screw >> 2 emergency stop buttons >> Spindle brake About the machine: A used Weiler Condor 81 lathe from 1988 is being offered in very good condition. The machine is of course fully functional. The lead and feed screws are covered for safety. A very robust and powerful machine. The 3-axis Heidenhain digital readout makes working even easier and more precise. The machine has been electrically and mechanically tested by us. A full oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to inspect and test this machine under power at our facility.