Used Tdr 700 for sale (5,954)

Condition: excellent (used), Year of construction: 2018, Weinig Powermat 700 Year of manufacture: 2018 Planing width: 230 mm Planing height: 160 mm Infeed table: 2,500 mm Feed speed: 40 m/min Feed motor: 7 kW Table treatment: Marathon coating (hardened, excluding infeed table and special plates) Driven roller in table with width 200 mm Memory Plus system for 500 profiles Spindle arrangement Bottom: 11 kW Right: 7.5 kW Fodpfx Aeyg Hflsbuefu Left: 7.5 kW Top: 11 kW Top: 11 kW Bottom: 11 kW Machine is in very good condition

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Very well-maintained cycle lathe with only 15652 operating hours. Working area: Center distance 3000 mm Swing diameter over bed 730 mm Swing diameter over cross slide 450 mm Bed width 480 mm Main spindle: Spindle mount according to DIN 55027 size 11 Spindle bore 130 mm Ffedpsydiy Hofx Abuju Spindle diameter at front bearing 170 mm Spindle taper 1:20 Tap in center sleeve MT 6 Main drive: AC drive with 2-stage ZF gearbox (automatic shifting gearbox) Drive power (100/60% duty cycle) 22/28 kW Total speed range 1 - 2200 rpm Maximum spindle torque: approx. 2200 Nm X-axis (cross slide) performance data: Maximum travel: 400 mm Feed force: 14 kN Speed: 4 m/min Z-axis (bed slide) performance data: Feed force: 18 kN Speed: 7 m/min Max. workpiece weight: Between centers without steady rest: 2000 kg With one steady rest: 2200 kg With two steady rests: 2500 kg In the chuck: 750 kg Tailstock: Quad diameter: 115 mm Quad stroke: 225 mm Quad taper: MK 6 Equipment and accessories: Heidenhain MANUALplus 4110 CNC control SCHUNK ROTASplus 400-102, 3-jaw manual chuck 2 steady rests PARAT tool holder Chip conveyor Coolant system Work area enclosure with two sliding doors. Machine length 5700 mm, with swarf converyor 7400 mm Machine width 2100 mm

Condition: used, Planing table length: 1,200 mm Working width: 230 mm Working height: 160 mm Number of spindles: 6 Spindle 1: Bottom / 7.5 kW / 6,000 rpm Spindle 2: Right / 15 kW / 8,000 rpm Spindle 3: Left / Shared drive with #2 / 8,000 rpm Spindle 4: Top / 11 kW / 8,000 rpm Spindle 5: Top / 7.5 kW / 8,000 rpm Spindle 6: Bottom / 7.5 kW / 8,000 rpm Spindle diameter: 40 mm Control: Memory Plus Feed speed: 40 m/min / 5 kW WEINIG Powermat 700 planing and moulding machine for four-sided planing and profiling of timber, equipped with CNC control. Available by arrangement from March 2026. Ffodpfx Ajxpuufobueu The sale of this machine is subject to the prior sale of the briquetting press (Ref. No. 800055) or the complete planing mill (Ref. No. 100101).

Condition: used, Lot of machinery for a compact planing mill comprising: - Four-side planer Weinig type Powermat 700, year 2022 - Briquetting press Spänex type SHB 250, year 2019 - Rip saw Jrion type HFS-170/15-SA - Strapping machine StraPack type RQ-8S - Band resaw Hema type UH 800 TR - Extraction system Spänex filter tower and Höcker Polytechnik fan Fsdpfx Abjxmh U Hsujfu The system is still in operation and can be inspected under power at any time. Available by arrangement from March 2026. Further information on request. Individual sale possible by arrangement.

Condition: used, Year of construction: 1981, functionality: fully functional, Braun profile belt sanding machine BP 700, Table tiltable up to 45°, Width 500 mm, depth 1260 mm, height 1040 mm, Sanding height 200 mm, cutting height 200 mm Sanding belt length 3020 mm Band saw blade length 3050 mm Working width 700 mm Ffjdpfxsw E Igpo Abusu Three-phase motor 1.5 HP, 220/380 Volts Belt speed 18 m/s Mobile on base frame

Condition: good (used), Technical data for the shelf connector: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x shelf connector, used for shelf spacing: 700 mm Total length: 700 mm Cross section: U 35x25 mm Material thickness: approx. 2.00 mm Material color: blue Drill hole diameter: 11 mm Weight: 0.930 kg | piece 02x screws M10 x 35 mm 02x nuts M10 Your contact person in our company: Fsdpfxevpvyyj Abuefu Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this article is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: used, Technical specifications for the wide-span racking: Fjdpfx Asv Hzfvsbusfu Racking system: Stow Type: Midirack Specifications for the installation: Number of rack rows: 01 unit Rack length: 2,810 mm Number of bays per rack row: 01 unit Number of levels incl. ground level: 05 units Scope of delivery includes: 02x End frames, used Material finish: Sendzimir galvanized Upright profile dim.: 55 x 45 x 1.5 mm incl. horizontal and diagonal bracing, base plates The uprights are pre-assembled 2,000 mm high 700 mm deep 10x Beams, used Material color: yellow Z-profile: 74 x 30 mm Connector: 2 hook Clear span: 2,700 mm 20x Safety pins, used Material finish: Sendzimir galvanized For securing the beams against accidental dislodging 05x Chipboard panels, used Thickness: 22 mm Width: approx. 2,680 mm Depth: approx. 690 mm Surface: possibly coated (possibly two-part) Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transportation or shipping is required beyond collection, additional costs will apply. These can be requested from us depending on the delivery location and scope.

Condition: good (used), Technical specifications for wide-span shelving: Racking system: Stow Type: Midirack Ffjdjv Iakgepfx Abuju Installation details: Number of shelf rows: 01 pc. Shelf length: 1,910 mm Number of bays per row: 01 pc. Scope of delivery: 02x shelf uprights, used Material finish: Sendzimir galvanized Upright profile dimensions: 55 x 45 x 1.5 mm Incl. horizontal and diagonal braces, base plates The uprights are pre-assembled Height: 2,000 mm Depth: 700 mm 10x shelf beams, used Material finish: white Z-profile: 77 x 32 mm Weight | per piece: approx. 3.95 kg Connector: 2 HK (hooks) Clear span: 1,800 mm 20x locking pins, used Material finish: Sendzimir galvanized For securing the beams against accidental lifting 05x chipboard panels, used Thickness: 22 mm Width: approx. 1,780 mm Depth: approx. 690 mm Surface: possibly coated (possibly in two parts) Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping is required, this will incur additional costs, which can be requested from us depending on the delivery location and scope.

Condition: good (used), Year of construction: 2012, travel distance X-axis: 700 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, Used 3-axis machining centre DMG MORI Milltap 700 Year of manufacture: 2012 Control: Siemens Travel paths: X 700 mm, Y 420 mm, Z 380 mm Spindle speed: 10,000 rpm Tool holder: DIN30 Renishaw 15-position tool changer Dimensions and Weight Dimensions: 2,500 mm x 1,650 mm x 2,950 mm Weight: approx. 3,400 kg The machine can be inspected by appointment in Burbach. Loading can be arranged. Technical data, accessories, and machine description are non-binding. Ffedpfx Absx N Dcujuou

Year of construction: 2000, condition: ready for operation (used), number of axes: 2, This Parpas RUAP 700 was manufactured in 2000. A used cylindrical grinding machine, fully reconditioned and in excellent condition. Features include Siemens Sinumerik 840C control, 700 mm distance between centers, and a maximum workpiece diameter of Ø 360 mm. If you are looking to get high-quality grinding capabilities, consider the Parpas RUAP 700 machine we have for sale. Contact us for more information. • Status: Excellent • Control: Siemens Sinumerik 840C • Distance between centers: 700 mm • Center height: 185 mm • Maximum workpiece diameter: 360 mm • Maximum table travel (Z-axis): 820 mm • Table feed speed (Z-axis): 0–10 m/min • Maximum wheelhead travel (X-axis): 500 mm • Wheelhead feed speed (X-axis): 0–10 m/min • Max wheel size (left): 508 x 203 x 76 mm • Max facing wheel size (right): 450 x 127 x 50 mm • Wheel motor power: 10 hp • Workpiece spindle speed: 0–600 rpm • Wheel spindle speed: 0–2,880 rpm • Workpiece spindle taper: ISO 50 Fedpfsygmg Nsx Abujfu • Tailstock internal taper: Morse 4

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,871 h, clamping force: 7,000 kN, screw diameter: 40 mm, total height: 2,500 mm, overall weight: 20,000 kg, This Engel E-Duo 740H-740L-700 combi was manufactured in 2017. A robust hydraulic injection moulding machine, it features a system size of 8.5 m x 2.5 m x 2.5 m and a total weight of approximately 20,000 kg. It includes dual 3-zone screws and 32 hot runner control circuits. Consider the opportunity to buy this Engel E-Duo 740H-740L-700 combi. Contact us for more information. • 2 x 3-zone screws d50 / 32 hot runner control circuits • Max mold weight (total): 11000 kg / max mold weight per plate: 7300 kg / max distance of the molds center of gravity from clamping surfaces: 315 mm • Opening force (with pressure pad) kN 510 • Opening force: 130 kN • Platen size (H × V): 1510 × 1440 mm • Distance between tie bars (H × V): 1100 × 960 mm • Tie bar diameter: 175 mm • Max. mold weight: 11000 kg • Injection Unit 1 • Injection capacity: 318 cm³ • L/D ratio (3-zone screw): 24 • Recovery rate (3-zone screw): 31 g/s • Injection rate: 281 cm³/s • Nozzle stroke: 600 mm • Heating wattage: 16 kW Fjdpex D E Dtjfx Abusfu • Electric screw drive: 34 kW • Torque at 60% duty cycle: 903 Nm • Injection Unit 2 • Injection capacity: 318 cm³ • L/D ratio (3-zone screw): 24 • Recovery rate (3-zone screw): 31 g/s • Injection rate: 281 cm³/s • Injection pressure (regenerative): 2400 bar • Nozzle stroke: 600 mm • Heating capacity: 16.2 kW • Number of heating zones incl. nozzle: 6 • Electric screw drive: 34 kW • Torque at 60% duty cycle: 903 Nm Dimensions Machine Depth 8500 mm

Condition: used, Year of construction: 1998, measuring range X-axis 700 mm Fedpfxsyfh R Te Abusfu measuring range Y-axis 1.000 mm measuring range Z-axis 580 mm control ZEISS - SOFTWARE CALYPSO max. acceleration 1.000 mm/s² In our assessment, the machine is in good used condition and can be inspected under power by appointment. A software update was performed. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: good (used), Year of construction: 2018, power: 0.55 kW (0.75 HP), AR Filtrazioni ARF 700 YB air purifier, built in 2018. The ARF series is designed for the extraction and purification of micro-dust and fumes generated during dry/wet processing. The incoming air first passes through a metal filter sequence and a synthetic filter, which traps larger particles. In the next phase, the air is passed through a very high-performance HEPA filter (H13) in accordance with the European standard EN 1822, before being released back into the environment completely clean. Ffsdpfx Abjv T Db Tjuju Dimensions: 460 x 500 mm, H 1,050 mm Weight: 80 kg Flow rate: 700 m³/h Connection: 100 mm #8347

Condition: used, Year of construction: 2004, Feed length: max. 5,500 mm Saw blade diameter: max. 700 mm Cutting width: max. 700 mm Ffjdpsx Eblvefx Abuju Cutting height: max. 120 mm Automatic optimizing cross-cut saw (push saw) Dimter type OptiCut 700 for cross-cutting very wide timbers according to defects (fluorescent chalk) and lengths.

Condition: used, tank capacity: 700 l, GENERAL Design: rectangular Remarks: Internal base dimensions approx. 100 x 100 mm; V2A frame with 4 plastic wheels; loose lid with central hand hole diameter approx. 230 mm (hand hole cover made of plastic); outlet approx. 220 x 220 mm with plastic flap (presumably Teflon); one tank has a slightly bent lid edge Total width: 1,020 mm Total height: 1,150 mm Total length: 1,110 mm Top plate: open with loose lid Location: Bremen Volume: 700 liters Cylinder wall thickness: 2.0 mm Product contact material: V2A 1.4301 (AISI304) Condition: used Last application: pharmaceutical industry TANK Design: mobile frame Fedpfxsycltmj Abusfu MATERIAL SPECIFICATION Interior surface: high-gloss finish TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 2.0 mm Top wall thickness: 1.5 mm

Condition: used, tank capacity: 700 l, GENERAL Design: upright Remarks: Agitator made of 1.4541 (V2A); feet with platform and screws made of Fe Speed: 1400 rpm Fsdjyclihepfx Abusfu Internal diameter: 830 mm Total height: 2,160 mm Power: 0.45 kW Top: open with loose lid Agitator: propeller Location: Bremen Volume: 700 liters Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,290 mm Previous application: Beverage industry TANK Bottom: flat bottom Support: feet Number of feet: 4 pcs EQUIPMENT Outlet: available MATERIAL SPECIFICATION Feet material: stainless steel AGITATOR Voltage: 220/380 Volt Agitator arrangement: off-centre in top cover

Condition: used, tank capacity: 700 l, GENERAL Equipment: butterfly valve Construction type: upright Remarks: Frame: Fe; manway diameter: approx. 380 mm; new outlet valves (butterfly valve) optionally available for €295; External diameter: 940 mm Total width: 1,050 mm Total height: 1,750 mm Total length: 1,050 mm Max. excess pressure: 0.5 bar Location: External storage Volume: 700 litres Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 940 mm TANK Lower bottom: conical bottom Support type: frame EQUIPMENT Manway / dome: on the top head Fodpfx Ajyckzpobuofu Outlet: 51 mm Note: slight residues

Year of construction: 2012, condition: used, Technical details: max. temperature: 700° - übliche Temperatur: 400 - 650°C Grad size of opening: B: ca. 2200 x T: ca. 3800 x H: ca.1100 mm program control: Siemens S7/300 IM 151-7 interface: Ethernet container volume: Ofen-Volumen: 9,2 m³ l control voltage: 24 / 230 Volt current type: 1P/PEN; 50 Hz Voltage: 400 V Fjdpeu R Dhxefx Abuefu elect. connected power requirement of heater: 3 x 3 x 21 kW = 189 kW flow rate: 3 x ca. 9.000 = 27.000 m³/h weight of the machine ca.: 8,0 t dimensions of the machine approx. HxWxD: ca. 3.9 x 3.8x 4.8 m dimensions electric cabinet: ca. B: 2.400 x T: 400 x H: 2.000 mm transport dimensions LxWxH: ca. 5,2 x 3,6 x 2,9 m Electrically heated circulation oven Electric annealing furnace whose housing is made of profiled sheet steel and lined with lightweight refractory bricks/ firebricks. Application/processes: mainly annealing of low-alloy and high-alloy wood cylinders (e.g. alloyed gray cast iron) Usual operating weight 5000kg max. 8000kg The parts are placed directly crosswise on the bogie hearth/grate in the flow device. (Height above floor approx. 750mm without grate) Heating integrated in oven ceiling Circulation fan (3 compact fans) on oven side wall, 3 x 4.0 kW = 12.0 kW Forced cooling (1 cooling air fan) Program control via 25 programs with 50 program sections per program Oven door/lifting door with SWE gear motor approx. 2.2 kW (frequency-controlled) Bogie hearth drive approx. 3.0 kW SEW geared motor (frequency-controlled) incl. center rail (chain drag) used, good condition *

Condition: ready for operation (used), Year of construction: 1975, functionality: fully functional, Complete plant, Centrifuge E 700 H/1, Drum dimensions 690/720/600 mm, Drum capacity 120 L, Speed 735 rpm, Wall thickness 12 mm, Material GS 45, Max. loading 300 kg, Charges per hour: 10, Heating power 8 kW, Operating voltage 380 V, Total connected load 35 A, Lifting device for loading, Vibratory chute for chips and parts, 3 separator drums with different hole patterns. Chip conveyor belt to scrap container. The unit can still be demonstrated under power. Ex production site: Dismantling and loading not included in the price. Assistance and forklift are available. The dismantled components weigh a maximum of 2 tons. Ffodpfxsw Evy Rs Abueu

Condition: refurbished (used), LBL Brenta chipper CT 700 Max. Cutting depth = 150mm. Max. Cutting height = 650mm 9 blades Free center disc, overheating protection Clearance = 800mm Fodpfx Absucp N Ajuofu Fast, precise positioning thanks to servo motor

Condition: excellent (used), Dough divider. Manufacturer - Friul Co srl. Type - M44/700. Portion weight - 300-650gram. Capacity - 70-400kg/h. Container capacity - 44liter. 230V, 50hz, 1300W, 6.5AMP. Dough rounder. Manufacturer - Friul. Type - R10. 230V, 50hz, 370W, 2.4AMP. Elevator included. CLH.24 Fsdpfx Ajv Szubsbusfu

Condition: ready for operation (used), Year of construction: 1990, Immediately available ex location: CNC Tool Milling Machine Hermle Type UWF 700 Year of manufacture: 1990 Heidenhain TNC 145 Table: 700 x 280 mm Travel X/Y/Z: 410/310/400 mm SK 40 Drive: 2.2 kW Hydraulic tool clamping Ffedpfx Aeyg Elkobueu Spindle speeds: 40 – 2000 rpm Quill stroke: 63 mm Rapid traverse in all axes: 1.5 m/min Drive: 2.2 kW Tool holders, vise Weight: 1.5 t Price: EUR 2,750.—plus VAT ex location

Year of construction: 1972, condition: ready for operation (used), Spindle-to-table distance min./max.: 81mm/481mm, counter support spindle center distance: 195mm, spindle head swivel: 360°, milling spindle diameter: 70mm, spindle adjustment: 100mm, headstock adjustment: 300mm, table dimensions X/Y: 480mm/820mm, travel X/Y/Z: 500mm/200mm/400mm, max. workpiece length: 400mm, spindle speed: 1600rpm, feed X/Y: 500mm/min, feed Z: 250mm/min, spindle head swivel: +/-30°, machine dimensions X/Y/Z: approx. 1600mm/2550mm/1700mm, weight: approx. 2300kg. The machine was electrically tested at the end of 2025 and a defect of the emergency stop switch was discovered. Documentation available. On-site inspection is possible. Fsdpfxox S Rcms Abujfu

Condition: ready for operation (used), Year of construction: 1989, Travel X/Y/Z: 700mm/500mm/600mm, speed: 6300rpm, power: approx. 10kW, feed X/Y/Z: 4m/min, rapid traverse X/Y/Z: 10m/8m/10m/min, machine dimensions X/Y/Z: approx. 4500mm/2300mm/2500mm, weight: approx. 6000kg, operating hours: 65425h. On-site inspection is possible. Fjdpfx Abjwmqxkoujfu

Year of construction: 1992, condition: ready for operation (used), A complete punching system with a grid punch is available. 1) Double reversible decoiler, load capacity: 1000kg. 2) Alba GGVHY 200 straightening machine, year of manufacture: 1992, feed rate: 6.5m/min, max. material width: 200mm, max. material thickness: 4mm, transport rollers: 2. 3) Alba MA RIA 7 feed, year of manufacture: 1978, max. material width: 300mm, max. material thickness: 3mm, feed rate: 40m/min, control: Siemens S7. Material thickness: 3mm, feed speed: 40m/min, control: Siemens S7 with OP7. 4) Punching machine Raster HR 80/700 NL, year of manufacture: 1992, pressing force: 80t, stroke rate: 250/min, table dimensions X/Y: 730mm/750mm, ram dimensions X/Y: 730mm/630mm, ram stroke: 40mm, ram adjustment: 80mm. 5) Profiling machine CIS. Documentation available. On-site inspection is possible. Fodpfx Abew Az Rvoujfu