Used Beet Hacker for sale (62)

Condition: ready for operation (used), Year of construction: 1999, IMMEDIATELY AVAILABLE, chamber filter press from Häcker with base frame and 50 m3/h Abel pump, plate format 1200 x 1200 mm, approx. 90 PP plates, 30 mm cake, content approx. 2700 liters, automatic. Plate transport, open outlet in filtrate trough on both sides, press is ready for use immediately after assembly, Abel pump was serviced by the manufacturer shortly before it was taken out of service, galvanized base frame with staircase, location is near Würzburg / Germany Lredpfx Ahsrunu Iozel

Condition: refurbished (used), We offer various piston pumps from Häcker, PP design, various sizes from 1 - 10 m3/h, up to 10 bar, cpl. overhauled Ledpfxjikl Tpe Ahzerl

Condition: refurbished (used), Used, complete reconditioned, 1 year warranty, plate size 400 x 400 mm, 20 plates, open spout, 25 mm cake thickness, pressure max. 10 bar, capacity approx. 60 liters, filter surface 5m², dimensions 2500 x 700 x 1500 mm, weight 1000 kg, engine hydraulics, drip tray, filtrate, with or without filter cloths, piston pump incl. Piping with built Ledpfx Ajfbbpqjhzorl

Condition: like new (used), functionality: fully functional, We are offering an as-new HÄCKER chamber filter press Type 01.120 with a new control cabinet. Electrohydraulics with a double-acting cylinder. Equipped with new filter plates, which can be configured as needed for your application. Lsdpfx Aeyhn H Tehzerl Includes the following additional equipment: - Automatic plate shifting device with automatic shaking system - Light barriers on both sides - Automatic filtrate drip trays Technical specifications: Condition: Demonstration unit, unused Plate size: 1,200 x 1,200 mm Number of chambers: optional, depending on plate pack and application Cake thickness: optional, depending on plate pack and application Capacity: 2,650 liters Filter area: 175 m² Operating pressure: 10 bar Drive power: 2.2 kW Discharge is open via a filtrate corner and a filtrate trough. We can also offer you a matching HÄCKER piston pump for this filter press. For further details or technical questions, please feel free to contact us at the provided phone number or email address at any time.

Condition: used, functionality: fully functional, We offer a factory-refurbished HÄCKER chamber filter press type 01.080 with automatic control. Electrohydraulics with single-acting cylinder Elevated design for positioning underneath tipping containers Control of the feed pump with automatic press-full detection. Technical data: Condition: used, factory-refurbished Plate size: 800x800mm Number of chambers: 40 Cake thickness: 25mm Volume: 500L Filter area: 44m² Lodpfx Asyhnyaehzerl Feed pressure: 10 bar Open discharge via filtrate corner, with filtrate channel, drip plate available. We can also offer you a used HÄCKER piston pump to match this filter press. For further details and any technical questions, please feel free to contact us at the phone number or email address provided.

Condition: used, functionality: fully functional, We offer a factory-refurbished HÄCKER chamber filter press, type 01.080. Electrohydraulic system with single-acting cylinder Raised version for placement of tipping containers underneath Technical specifications: Condition: used, factory-refurbished Plate size: 800x800 mm Number of chambers: 40 Cake thickness: 25 mm Capacity: 500 liters Filtration area: 44 m² Operating pressure: 10 bar Open discharge via filtrate spout, with filtrate trough and drip plates. We can also offer a used HÄCKER piston pump to suit this filter press. Lredeyhnwlepfx Ahzjl For further details and technical questions, please feel free to contact us at the provided telephone number or email address at any time.

Condition: new, Four-shaft shredder in very good condition with only 1200 operating hours. Year of manufacture: 1998 2 x 7.5 kW motors. Lrsdpfx Ahsy T Hbuozjl

Condition: good (used), Year of construction: 2012, Slow-speed machine with a push-floor system. Rotor width: 830 mm. Large rotor with 38 blades. Blade size: 40 x 40 mm. Lrsdpoy T Ef Eefx Ahzol 22 kW motor. Screen aperture: 25 mm.

Condition: used, Year of construction: 2009, Used machine Lrsdpfx Ahex H U Ngszsl Year of manufacture: 2009 776 operating hours Equipment and technical data: - Motor: 18.5 kW - Rotor diameter: 248 mm - Hopper opening: approx. 620 x 800 mm - Standard screen - 30 cutting knives - Screen perforation: 20 mm - Extraction nozzle: 160 mm Dimensions: approx. 1730x1160x1650 mm Weight: approx. 1100 kg Availability: short-term Storage location: Röllbach

Condition: excellent (used), 37 kW motor 4 knives throat 160x400 mm Roller motors 2x 1.3 kW Lredpfjvc Atmox Ahzjl Vibration motor 2.2 kW Vibrating chute with magnet, dimensions 1900x400 mm

Condition: good (used), Hacker feed roller, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Feed roller: serrated -Roll diameter: 270 mm Lrjdedl E Iiepfx Ahzsl -Transport roller width: 626 mm -Total length: 626 mm -Shaft mount: 80 mm -Quantity: 1x piece available -Weight: 137 kg

Condition: new, Year of construction: 2024, Chopper Knife 40 x 40 concave Lsdpfx Ahjbxu Dhjzjrl Knife for Weima, Large ..... For almost all common chippers / shredders From stock Bitburg Subject to prior sale

Condition: new, Year of construction: 2026, Weima single shaft shredder type WL 6 Power 18,5 kW Our machine concept WL 6 The Weima high performance shredders with their flexible can process all kinds of wood materials (hardwood, softwood, chipboard, MDF materials softwood, chipboard, MDF materials, plywood, veneer residues etc. ) into and, in the case of bulky materials, achieve an enormous volume reduction of the material. enormous volume reduction of the material. Mode of operation: The machine is equipped with a large hopper and can be fed by a conveyor belt or by hand. fed by means of a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost effective and cost effective material feed without the need for manual assistance. manual assistance. Technical specification WL 6 / 18.5 kW hopper opening: 800 x 1.000 mm hopper capacity: 0,9 m³ working width of the rotor: 800 mm diameter of the rotor: 252 mm Driving power: 18,5 kW Rotor speed: 80 -120 rpm Number of knives: 42 pieces type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Lrodpocbtpksfx Ahzsl Sieve perforation: 10-60 mm possible (standard 15-20 mm) Painting: WEIMA standard RAL 2002 / 7016 connected load: 400 V +/- 5% / 50 Hz weight: approx. 1.600 kg Included: - Switch cabinet ( Rittal ) incl. electrical control ( Moeller / Siemens ) and star-delta start-up - Rubber oscillating elements - V - rotor ( patented ) with knife pockets fixed in the profile - gear limit switch - Contact pressure

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Features and technical data: Lrsdpfx Aexavtdohzjl Feed opening: 600 x 800 mm Hopper capacity: 0.6 m³ V-rotor Rotor diameter: 252 mm Rotor working width: 600 mm Rotor speed: 60 – 100 rpm Cutting system: 28 knives 40 x 40 mm Screen perforation: 15/20 mm Control: electronic via PLC Control cabinet: fully wired, incl. 5 m cable Motor power: 18.5 kW Connection voltage: 400 V +/- 5% / 50 Hz Extraction nozzle diameter: 160 mm Dimensions approx.: L = 1,800 mm, W = 1,230 mm, H = 1,640 mm Weight: approx. 1,300 kg Includes: Automatic star-delta starter Automatic shut-off in idle mode Vibration-damping machine feet CE compliant Availability: short-term Location: Flörsheim

Condition: excellent (used), Vecoplan chipper for saw cuts Hacker 55/26/2 - German production - reverse - for the production of technological chips - a powerful shaft with a diameter of 650 mm TECHNICAL PARAMETERS: - 550 mm slot width - inlet height 260 mm - two knives - engine power 110 kW Lrjdpsihpg Eofx Ahzel - conveyor belt length 5000 mm - 50 x 50 mm sieve - three upper pulling toothed shafts - four lower pulling toothed shafts - rotor width 650 mm - rotor diameter 650 mm - hydraulic lifting of the feed rollers - feeder height from the base 1100 mm Transport dimensions 1100x245x240 cm weight about 10 t

Condition: used, Year of construction: 2022,

Condition: used, Year of construction: 2023, Warning signs with lighting Chassis / Lredouhpf Iepfx Ahzel

Condition: excellent (used), 2 knives Knife width: 35 cm Drum diameter: 125 cm Drum width: 25/7 cm Lrjdpjx Tf E Esfx Ahzjl Maximum material height: 13 cm Maximum material width: 33 cm Outlet: 25 cm Motor: 45 kW Transport width: 200 cm, height: 150 cm, length: 280 cm

Condition: used, Year of construction: 2012, Overview (H2) This CIMEC S1/2 ADH labeling machine was manufactured in 2012 and is designed for labeling long-neck bottles in the formats 33cl, 50cl and 27.5cl. The machine achieves an output of up to 2,500 bottles per hour and is already disassembled and available at short notice. Technical details (H3) Output: 2,500 bottles/hour Bottle formats: 33cl longneck 50cl longneck 27.5cl longneck Machine rotation: clockwise Bottle holders: 6 plates Labeling stations: 2 self-adhesive label dispensers Power supply: 380V / 3-phase / 50 Hz Power consumption: 2 kW Machine weight: approx. 1,200 kg Bottle sizes: Height: 200-380 mm Diameter: 50-120 mm Label sizes: Front label: width 50-240 mm, height max. 140 mm Back label: width 50-140 mm, height max. 140 mm Max. Paper feed height: 150 mm (optional 195 mm) Max. Label width at maximum speed: 150 mm Ljdpev Hcahefx Ahzerl

Condition: used, Year of construction: 2015, Overview This automatic self-adhesive labelling machine was manufactured in 2015 by Not provided ENOS. The machine is designed for flexible labelling of bottles in beverage, wine, and spirits production. It is described in good condition. Maintenance work was carried out in summer 2025, including replacement of the pressure block and bottle contact rollers. Availability is on request. Information regarding installation status, visit possibility and reason for sale is not provided. Technical data Capacity: approx. 1,200 bottles/hour (standard labels) up to approx. 1,500 – 1,800 bottles/hour (small labels) approx. 1,100 bottles/hour (front and back from one roll) Formats: Diameter 50 – 100 mm, conical bottle shapes Application: Bottle labelling (beverage, wine, spirits) Configuration: 1 labelling station with 3-roll system for front and back labelling from one roll Label positions: Front, back Incl. Capsule applicator, Capsule shrink unit, Conveyor system and Accumulation table Lredpfx Ahoy Hkghozol

Condition: used, Year of construction: 2000, Overview This self-adhesive labelling machine was manufactured in 2000 by Germany KRONES. The Autocol 1200-20 TA is designed for the application of self-adhesive labels on bottles. The machine is configured with three labelling stations (front, back, and neck/seal label) and includes a Taxomat label feed system. It is suitable for standard beverage packaging applications and is equipped with an integrated Checkmat inspection system for quality control. The machine is currently still installed and will be available from February 2027. The unit is described as used and maintained based on operational requirements. Technical data Capacity: up to approx. 15,000 bph Formats: 0.5 L – 1.0 L (15 formats) Application: Self-adhesive labelling of bottles Configuration: 3 labelling stations (front / back / neck/seal) Label positions: Front, back, neck/seal Incl. Inspection system | KRONES | Checkmat Lodpfxsy Azu Us Ahzorl

Condition: used, Year of construction: 2017, Overview This GERNEP Soluta 6-480/2 1SK TaxU labelling machine was manufactured in 2017 and is designed for the application of self-adhesive labels in beverage bottling lines. The machine is configured with one self-adhesive labelling station and is specifically adapted for swing-top (bail closure) system is equipped with a HERMA labelling unit and supports a capacity of up to 2,500 bottles per hour, with a variable speed range from 800 to 3,000 bottles per hour. The machine is designed for U-seal label application and includes alignment systems for proper positioning of swing-top closures. With modern control technology based on Siemens S7-1200 and a Sütron touch panel, the machine offers reliable operation and easy integration into existing production lines. Technical Data Direction of operation: RM Capacity: approx. 2,500 bottles per hour Speed range: approx. 800 – 3,000 bottles per hour Labelling technology: Self-adhesive Labelling station: 1 × self-adhesive labelling unit (HERMA) Label speed: approx. 40 m/min Roll diameter: 300 mm Label height: up to 240 mm Bottle Formats Bottle types: Swing-top (bail closure) bottles, other bottles also possible 500 ml – Ø 66 × 280 mm 1,000 ml – Ø 85 × 316 mm Label Data Label dimensions: approx. 160 × 17 mm Application type: U-seal label Electrical Data Control system: Siemens S7-1200 Operator panel: Sütron 7” Power supply: 400 / 230 V Frequency: 50 Hz Equipment / Features Alignment system for swing-top closures  Bottle orientation system in infeed star Conveyor height: approx. 1,000 mm Electrical cabinet lighting Socket integrated in control cabinet. Lrsdpfxsyzc H Ne Ahzsl

Condition: used, Year of construction: 2023, Overview  This pallet labeller was manufactured in 2023 by LOGOPAK. The machine is designed for applying self-adhesive labels on pallets. It was in service until September 2025 and is currently stopped, still installed, with energy disconnected. The machine is available immediately and can be visited on request. Maintenance was carried out twice per year; . Technical data  Capacity: max. 100 pallets/hour Application: Pallet labelling (self-adhesive)     Ljdpfjyx I A Dex Ahzsrl

Condition: used, Year of construction: 2002, Overview This ENOS Millenium self-adhesive labelling machine was manufactured in 2002 and is designed for the application of pressure-sensitive labels on glass bottles, particularly in wine production environments. The machine is equipped with three labelling stations, allowing the application of front, back, and seal labels. With a capacity of approximately 2,500 bottles per hour, the system is suitable for small to medium-sized production lines. The machine supports Bordeaux and Burgundy bottle formats, with corresponding format parts included. Its modular design and self-adhesive technology provide flexibility for different label applications and bottle types. Technical Data Capacity: approx. 2,500 bottles per hour Labelling technology: Pressure-sensitive (self-adhesive) Number of stations: 3 Applications Front label Back label Seal label Bottle Formats Container type: Glass bottles Supported formats: Bordeaux Burgundy Format parts: Included for both bottle types Lrjdpsyxxxcsfx Ahzsl

Condition: new, The ZSH chipper series is specifically designed for forestry, horticulture, and municipal operations. These chippers are primarily used for volume reduction of tree and shrub cuttings as well as smaller trunk diameters. The produced wood chips are suitable for combustion in wood chip heating systems with screw conveyors or as a pre-stage in pellet production. The machines are robust, reliable, easy to operate, powerful, and produce wood chips of consistent quality and uniform size. Lrodpfxjyr Tkfj Ahzsl Other features Cost-effective solution for wood chip production | Compact design | User-friendly | Low energy consumption