Used Temperature Control Unit for sale (57,874)

Condition: ready for operation (used), The Deltatherm temperature control device is for sale, of course with the device's operating instructions. All spare parts are still available from the manufacturer. Nwsdpfx Ahjiw H Ubo Uer Quantity: 1 piece/ price per device Medium: oil Heating output: 18KW Max. temperature: 200 degrees Pump flow rate: 100l/min Discharge pressure: 3bar Dimensions, W: 400mm D: 765mm H: 1310mm Weight: 150KG

Condition: new, *Technical specification: -air-cooled, 25.5 kW referred to +10°C flow temperature at an ambient temperature of +32°C. -temperature range flow: +5°C to +30°C (optionally lower temperatures down to -5°C possible) -air flow rate: 8,000 m³/h -max. air inlet temperature: +30°C Nsdpeg Ewwrefx Ah Uewr -Optionally with heating capacity up to 24kW *Pumps: -Delivery capacity up to 150 ltr/ min. -Delivery pressure up to max. 4 or 7 bar -Motor output 1.1 or 2.2 kW *Dimensions: -L/W/H: 1,450 mm x 750 mm x 1,680 mm -empty weight: approx. 480 kg -Circulation medium connection: DN 32 IG *Details & Highlights: -Internal refrigerant: R 123 a -Power supply: 380-425V/ 50Hz -Regulation and control unit SBC-T -Setpoint and actual value display, alarm display -Fully hermetic reciprocating compressor -Refrigerant receiver with safety valve according to DIN EN 378 -capacity control -frost protection monitoring -Flow monitoring -grid cover over condenser -oil sump heater -drainage device -Level monitoring by magnetic float switch -installed dirt trap in the return line in the circulating medium -overflow valve between flow and return as pump protection, fixed setting -high and low pressure limiter according to DIN EN 378 -stainless steel tank, capacity: 80 litres, open system completely insulated Self-supporting housing with castors, mobile -system for indoor installation -control box IP 54 Other performance classes are available on request. Visit our homepage for further details. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, Year of construction: 2025, General: -Temperature range max. 150°C for OeL (heat transfer fluid) -robust sheet steel housing -device on rollers Hydraulics: -sealless immersion pump -Qmax. 60 l/min. - Pmax. 3,8 bar -Tank and heater made of stainless steel -Heating capacity 9 kW -Tank capacity ~20 liters -fittings made of brass/stainless steel -manual oil filling -mechanical level control -indirect cooling system (tubular spiral heat exchanger) -cooling capacity ~40.000 kcal/h -manometer -bypass -solenoid valves for cooling Electrical and control system: -Electronic PCB control -Solid State Relay -Safety thermostat -failure monitoring Nwsdpsddv Itjfx Ah Uor -Connection cable with plug Available in approx. 4 weeks!

Condition: good (used), functionality: fully functional, Power: 6370 watts Nwsdpfx Aev R Edwoh Uer Maximum operating temperature: 95°C Medium: water Two units available! Price per piece! Price for two temperature control units: 900 EUR!!!

Year of construction: 2016, condition: defective spare-parts repository (used), machine/vehicle number: 00050, Precision Temperature Control Unit (TCU) - BOFA THE DISPLAY CONTROLLER IS DEFECTIVE! Year of manufacture: November 2016, serial number 00050, excellent condition, the filter is in good shape, electric documentation of the TCU is present, refrigerant gas: R134a 0.75Kg in the system Precision temperature control unit designed for solder paste applications Reverse flow air technology enhances filter performance and increases life Process monitoring via temperature sensors that can be strategically mounted within the printer Precision temperature control unit designed for solder paste applications. The Temperature control unit (TCU) has been designed to meet a very specific process requirement within the electronics sector. The reliable placement of surface mount devices during PCB assembly requires that during the initial printing stage the solder paste is maintained at a temperature that ensures optimum performance. Njdpfohgr Ihox Ah Uowr With assembly now on a global basis, the variation of local climate and factory conditions means that this optimum level cannot be maintained without some form of intervention. The design of the TCU includes cooling and heating elements which ensure that the temperature within the printing environment is maintained within 1ºC of the optimum paste performance temperature regardless of whether the factory ambient is above or below this level. Reverse flow air (RFA) technology The RFA technology feature causes a fall in velocity and air direction change. Larger particulate falls out of the airstream into the filter’s drop-out chamber. With less particulate entering the filter media the filter life is significantly increased, enhancing filter capture performance and ensuring longer life. Technical specifications 1. Chiller module 2. Condensate collection container 3. Air outlet 4. Air inlet 5. Castors 6. Service door lock 7. Fail style condensate sensor 8. Four colour beacon mounting plate Technical data: Air delivery system: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 1°C Cooling capacity: 2000W Temperature sensor: Shared output from integrated printer sensor (0 – 10V input over 0 –50°C) Air in filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant gas: R134a 0.75Kg Full load current: 12.6A Start up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Noise Level: higher then 75dBA* Dimensions: 1285mm (H) + (beacon 450mm), 540mm (W), 670mm (D) Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 140Kg Documentation include: Electrical Schematic Sales price: 1.500 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2025, condition: new, From manufacturer very good quality heat control unit (Thermoregulator) for sale. Technical data: Nwedpfx Ahognlf Hs Ujr Brand: Churchill ISI-TAN Model: CH18 Heating Capacity: 9kW (oil or water) Cooling: 90C/40 kW Operation Range: 0-90C (water), 0-150C (Oil) Pump: 60l/min (German brand) Power Consumption: 10 kW Voltage: 400/50Hz, 3phases VAT and delivery cost is not included

Year of construction: 2015, condition: excellent (used), The temperature control unit is for sale ;2015- the new price was 4995€ Medium : Water Functions - Function for self-optimizing temperature control - Function and fault displays - User-dependent and password-protected rights - Limit comparator (tolerance band monitoring of the actual value with alarm message) - Adjustable setpoint limit - Weekly timer - Automatic heating and cooling program - Freely selectable ramp function for temperature changes during heating and cooling - VNC server via Ethernet (enables complete operation and management from the PC) - 2nd temperature setpoint - Tool management (setpoints and control parameters can be be saved as a recipe) - Measured value recording for quality assurance (actual values can be be output to SD card with time stamp) - Electronic level monitoring with dry run protection - Automatic filling and replenishment with leakage and level function monitoring level function monitoring - Automatic venting Monitoring/safety - Short-circuit-proof controller and control outputs Nwedpfx Asm Dtm Aeh Usr - Temperature sensor in circulating medium flow and return - Safety temperature limiter to prevent overheating and Safety valves against overpressure - Contactless heating control with solid state relay - Safety temperature reduction when switching off - Acoustic and visual warning signal with symbol and text text on the touch screen- Symmetrical mains load with three-phase drive and three-phase heating elements three-phase current heating rods - 3-fold safety shutdown of the heater - Reversible circuit breakers and motor protection switch - Dirt trap in the cooling water supply Hydraulics - Continuous cooling via motor valve

Year of construction: 2016, condition: as good as new (ex-display), machine/vehicle number: 00069, Precision Temperature Control Unit (TCU) - BOFA Year of manufacture: November 2016, serial number 00069, excellent condition, the filter is in good shape, electric documentation of the TCU is present, refrigerant gas: R134a 0.75Kg in the system Precision temperature control unit designed for solder paste applications Reverse flow air technology enhances filter performance and increases life Process monitoring via temperature sensors that can be strategically mounted within the printer Precision temperature control unit designed for solder paste applications. The Temperature control unit (TCU) has been designed to meet a very specific process requirement within the electronics sector. The reliable placement of surface mount devices during PCB assembly requires that during the initial printing stage the solder paste is maintained at a temperature that ensures optimum performance. With assembly now on a global basis, the variation of local climate and factory conditions means that this optimum level cannot be maintained without some form of intervention. The design of the TCU includes cooling and heating elements which ensure that the temperature within the printing environment is maintained within 1ºC of the optimum paste performance temperature regardless of whether the factory ambient is above or below this level. Reverse flow air (RFA) technology The RFA technology feature causes a fall in velocity and air direction change. Larger particulate falls out of the airstream into the filter’s drop-out chamber. With less particulate entering the filter media the filter life is significantly increased, enhancing filter capture performance and ensuring longer life. Technical specifications 1. Chiller module 2. Condensate collection container 3. Air outlet 4. Air inlet 5. Castors 6. Service door lock 7. Fail style condensate sensor 8. Four colour beacon mounting plate Technical data: Air delivery system: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 1°C Cooling capacity: 2000W Temperature sensor: Shared output from integrated printer sensor (0 – 10V input over 0 –50°C) Air in filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant gas: R134a 0.75Kg Full load current: 12.6A Start up Current: 20A Frequency: 50 / 60Hz Nwodjhgfnbjpfx Ah Ujr Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Noise Level: higher then 75dBA* Dimensions: 1285mm (H) + (beacon 450mm), 540mm (W), 670mm (D) Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 140Kg Documentation include: Electrical Schematic Sales price: 1.900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, functionality: fully functional, There are several Tool-Temp controllers for sale Nsdpfx Aov E Uireh Ujwr

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 2310-028, Precision Temperature Control Unit (TCU) - BOFA Year of manufacture: November 2013, serial number 2310-028, excellent condition, the filter is in good shape, electric documentation of the TCU is present, refrigerant gas: R134a 0.75Kg in the system Precision temperature control unit designed for solder paste applications Reverse flow air technology enhances filter performance and increases life Process monitoring via temperature sensors that can be strategically mounted within the printer Precision temperature control unit designed for solder paste applications. The Temperature control unit (TCU) has been designed to meet a very specific process requirement within the electronics sector. The reliable placement of surface mount devices during PCB assembly requires that during the initial printing stage the solder paste is maintained at a temperature that ensures optimum performance. With assembly now on a global basis, the variation of local climate and factory conditions means that this optimum level cannot be maintained without some form of intervention. The design of the TCU includes cooling and heating elements which ensure that the temperature within the printing environment is maintained within 1ºC of the optimum paste performance temperature regardless of whether the factory ambient is above or below this level. Reverse flow air (RFA) technology The RFA technology feature causes a fall in velocity and air direction change. Larger particulate falls out of the airstream into the filter’s drop-out chamber. With less particulate entering the filter media the filter life is significantly increased, enhancing filter capture performance and ensuring longer life. Nwedpfjhgg Rrjx Ah Uer Technical specifications 1. Chiller module 2. Condensate collection container 3. Air outlet 4. Air inlet 5. Castors 6. Service door lock 7. Fail style condensate sensor 8. Four colour beacon mounting plate Technical data: Air delivery system: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 1°C Cooling capacity: 2000W Temperature sensor: Shared output from integrated printer sensor (0 – 10V input over 0 –50°C) Air in filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant gas: R134a 0.75Kg Full load current: 12.6A Start up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Noise Level: higher then 75dBA* Dimensions: 1285mm (H) + (beacon 450mm), 540mm (W), 670mm (D) Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 140Kg Documentation include: Electrical Schematic Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, functionality: fully functional, The temperature control units – 4 units from Tool Temp with MP-888 controller – are available for sale, equipped with the following specifications: Medium: Water, up to max. 90°C Heating capacity: 3 kW & 6 kW = 9 kW, with adjustable stages Cooling capacity: 35 kW Pump capacity: 75 l/min, max: 4.5 bar Filling volume: 6 litres Nodpfx Ahjx Elbqe Uewr Weight: 55 kg Dimensions: 670 mm x 260 mm x 650 mm

Year of construction: 2018, condition: as good as new (ex-display), Frigel Water Temperature Control Units, like new, 400 V, 32 A, up to 90 degree Nsdpfx Aoi Tx Dnjh Uowr

Year of construction: 2025, condition: new, We are manufacturer of temperature control unit (Thermoregulator), so we are able to produce every capacity devices you need. Technical data: Brand: Churchill ISI-TAN Model: CH220x2 Njdpfohby Irox Ah Uewr Heating Capacity: 20kW (with oil) Operation Range: 300C (oil) Pump: 90x2 l/min,8bar, 1,5kW (German brand) Power Consumption: 21,5 kW Voltage: 400/50Hz, 3phases Delivery cost is not included

Condition: used, Year of construction: 2011, functionality: fully functional, For sale: 4 temperature control units by Plasma: Medium: water Temperature: max. 90°C Nwsdpex Ek Rdofx Ah Uor Heating capacity: 9 kW Cooling capacity: 30 kW Alarm function Flow measurement Automatic water change function PT 100 sensor Interface for TTY 20 mA via 9-pin D-Sub connector

Condition: ready for operation (used), functionality: fully functional, TT-188 temperature control units with MP-888 controller from TOOL-TEMP are available for sale; 4 units in stock. Medium: water up to 90°C Heating capacity: 3KW + 6KW = 9KW Cooling capacity: 35KW Filling volume: 6 liters Mold drainage Pump capacity: 60 l/min, max. 4 bar Weight: 55 kg Nwedpfxjx Db Tks Ah Uer L: 670 mm - W: 260 mm - H: 650 mm

Year of construction: 2015, condition: excellent (used), The device is for sale: Nwodpencdwysfx Ah Ujr They have not been used much and are fully functional Please refer to the type plate for technical details, there is of course a complete operating manual for the device

Condition: excellent (used), Year of construction: 2017, Stainless steel jacketed tank Mixer with variable speed control Temperature tank sensor Nedpfx Ahjx Dnk Ns Ujwr Capacity 300 ltr Mobile on castors

Condition: ready for operation (used), Control Techniques 190U2B300BARAA215320 Servo motor SN:867324 , professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos, The agreed sales discounts do not apply to this item. Please ask for price separately! Nwedett Hnkspfx Ah Usr

Condition: new, Control Techniques / Emerson 142U2E300BARAA165240 Servo motor, serial no. according to photo, unused, 100% functional, scope of delivery according to photos Nwedpfx Ahoi D Hpns Uer

Condition: good (used), Agie Charmilles SP3 EDM Die Sink Machine Nwsdpfsx H Rxkox Ah Uor S/No. MON30 NR-001014. With Filtermist. Rolls-Royce Approved Contractor (PIC) will need to remove item. Please contact PIC for a quote, contact details can be found in the Essential Information section. BIDDING NOTE: All Top Closing Bids received either through Auction or via Make Offer function will be presented to Rolls Royce for final approval. Buyers will be notified by email and/or by Invoice if their bid is successful. COLLECTION NOTE: Rolls-Royce Approved Contractor (PIC) will need to remove item. Please contact PIC for a quote, contact details can be found in the Essential Information section.

Condition: used, Year of construction: 2012, operating hours: 554 h, functionality: fully functional, Mitsubishi FB16CPN Electric Forklift truck. In very good condition and working order. Year 2012 Nwsdpfox Nbn Iex Ah Usr 1 pervious owner from new! Have original purchase receipt of £20k plus. Truck is registered With the UK DVLA to be able to drive truck on the road. Digital Display allows you to see what speed you are doing and also displays the weight you are lifting. Comes complete with Single Phase Battery charger, Spare keys and Handbook. See last photo of trucks Features. Collection and inspection is Tadley UK (Near Reading) Specification: Mitsubishi FB16CPN Electric Folklift truck Capacity: Nominal 1600kg at 500mm Load centre With sideshift: 1600kg at 500mm Load centre at full height With sideshift: 1425kg at 600mm Load centre at full height Mast: Simplex 2 stage clear view Lift height: 3290mm Closed height: 2125mm Tyres: Solid Pneumatic profile Folks: 1000mm Long Single phase battery charger

Condition: good (used), Year of construction: 2020, Control cabinet cooling unit, control cabinet air conditioner, distribution cabinet, heat exchanger, wall-mounted cooling unit, control cabinet cooler Nedpfx Aex Nfktoh Uewr -Manufacturer: Rittal, wall-mounted cooling unit Blue e -Type: SK 3187930 -Cooling capacity: 2.6 kW -Number: 2x cooling unit available -Price: per piece -Dimensions: 450/250/H1600 mm -Weight: 56 kg/pc.

Condition: ready for operation (used), Fanuc A06B-0061-B003 AC servomotor SN: C22ZF179D with pulse coder A860-2020-T301 Nodpfx Asx Nlrdeh Uswr

Condition: ready for operation (used), Fanuc A06B-0062-B103 AC servomotor SN: C201F084B with pulse coder A860-2020-T301 Nwedpjx Nlrqsfx Ah Uer

Condition: ready for operation (used), Fanuc A06B-0373-B569 AC servomotor SN: C01YF0315 with pulsecoder A / A860-0346-T041 Nwsdpfox Nlt Ijx Ah Uor