Used Textile Cleaning Machine for sale (66,717)

Condition: used, machine/vehicle number: 008562, X axis working area: 2465 mm Y axis working area: 1260 mm Working Table: Flat table Main Electrospindle power: 13.2 KW Number of controlled axes: 3 axes Total number of drilling spindles: 10 Pgodpfezvwilsx Akner Total number of tool changer positions: 16

Condition: used, machine/vehicle number: 008507, X axis working area: 5020 mm Y axis working area: 1380 mm Psdpfjzvwnbex Aknsgr Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 3 axes Total number of tool changer positions: 16

Condition: used, functionality: fully functional, color: grey, overall weight: 2,980 kg, empty load weight: 1,980 kg, Year of construction: 2000, Beach cleaner: + Canica S + Type T170 H + Drive for belt and rake via PTO (540 or 1000 rpm) + Leveler and collection hopper hydraulic + Year of manufacture: 2000 + Fully galvanized + Required tractor power: 60 HP + Area performance: 20,000 m²/hour + 552cm x 254cm x 230cm (LxWxH) + Unladen weight: 1,980kg; permissible total weight: 2,980kg + Working width: 170cm + Collection hopper: 1,400L + Municipal attachment from first owner Psdpfowvt Dhex Aknogr Receive all newly posted vehicles by email – subscribe to our NEWSLETTER! Errors and interim sale excepted!

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 110,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Pgodpfxsyahv Se Aknjr Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Condition: new, The POSEIDON-1000 cleaning machine is designed to diagnose, wash, and dry DPF filters and catalytic converters of various designs, meeting EURO 5 and EURO 6 standards. The machine offers gentle and effective cleaning through a washing method that achieves excellent results without damaging the expensive filters. The stand operates based on hydro-impact and turbulent fluid movement, using special washing solutions and temperature regimes for effective cleaning. After cleaning, the filter's operating properties are restored by 97%. KEY FEATURES - Testing of the filter before washing to assess the degree of clogging and after washing to check the quality of the cleaning. - Automated washing cycle with the possibility of programming all operating modes. Filter cleaning is hydrodynamic, with hydraulic and pneumatic systems operating in specific modes to generate hydraulic impulses for the removal of contaminants. - Accelerated drying of the filter by means of a powerful hot air blower, which allows the complete removal of residual moisture from the product. >> This allows the entire cleaning cycle to be completed in a short time, >> and return to the customer a clean and dry filter ready to be fitted to the vehicle. Perspective business with POSEIDON-1000 • The equipment and technology allow to perform high quality cleaning of DPF particulate filters of all types and brands of cars. • The most functional stand among foreign analogues, thanks to which it has high productivity. • Automated operation and control of the process of cleaning and drying the filter allows the stand to be operated by one person. • Minimal resources and time required to open your own service for cleaning particulate filters with our equipment. • Maximum quick payback of the equipment if you own a service for the repair of automotive units. Pjdpfspbv Hgex Aknsgr YOUR BENEFITS + Automated process of DPF filter cleaning with the possibility of programming all the machine's operating modes, gives you the opportunity to independently adjust the washing mode to increase the efficiency of the processes or to work with the modes set by the manufacturer. + Full control of the filter cleaning and drying process is guaranteed by the presence in the standard programme of graphs displaying air or water pressure values in real time. + The filter condition diagnostic function with report printing allows the creation of reports before cleaning (to check the degree of contamination) and after cleaning (to check the quality of the operation performed). + The working surfaces and the body of the stand are not subject to corrosion as they are made of stainless steel sheet material. + The hermetic chamber not only limits the spillage of technical fluids, but also reduces the noise level to acceptable levels, making work on the stand more comfortable and safer. + Quick installation of the DPF filter is possible thanks to a separate pneumatic system for the connection of a universal quick-fit adapter. + The universal tool allows the installation of any DPF filter, regardless of the vehicle type. + Closed-loop fluid filtration is achieved with coarse and fine filters. The filters are equipped with pressure gauges that allow the degree of contamination to be determined. + Rationally selected water tank volume allows to provide short fluid warm-up time, long time between fluid changes. Please contact us to get the best offer!

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 601 PVC Köşe temizleme makinesi ( 3 Bıçak), - Complies with CE standards. Pgederbid Iopfx Aknsr - Cleaning the corners of PVC profiles after welding - Cleaning the upper and lower surfaces of the corners - Possibility to separate surface and corner cleaning for acrylic profiles - Fully automatic operation with PLC - 3 different blade attachment possibilities - Automatic case wing profile separation feature - Ability to automatically center and square the profile

Condition: used, New 2013 Table size 1474 x 356 mm X axis 1016 mm Y Axis 596 mm Z Axis 584 mm (Head Traverse) Pgjdpfxsyhdi Rj Aknor Spindle Speeds 40 – 5000 rpm & 40ISO 7.5 hp Spindle Drive. Max Table load 850 kg

Year of construction: 2025, condition: new, A post-lease refurbished unit for regeneration of DPF, FAP, GPF, SCR, EURO5, EURO6, DOC and catalytic converters. Podpjig H H Eofx Aknsgr The device after a comprehensive overhaul: -new hoses and seals -regenerated turbine and water pump - latest software version -manufacturer's warranty ASK ABOUT AVAILABLE MODELS AND PRICE!!!

Condition: new, Year of construction: 2026, machine/vehicle number: SÇ 6000 S PVC FULL CNC KÖŞE TEMİZLEME MAKİNESİ, • Automatically cleans the burrs formed on the inner-outer corners and upper-lower surfaces due to melting during the corner welding process of PVC profile frames, with high precision and speed • CNC control system (2 axes) • Automatic profile recognition feature • Remote installation and support • Can be connected to four-head welding machines without requiring revision • Operates with G Code • Processing capacity of 160-200 frames per 8-hour shift • Equipped with a total of 10 cleaning tools • Cleaning of upper and lower surfaces for both white and colored profiles • Cleaning of upper and lower surfaces for coated profiles • Cleaning of inner and outer gasket grooves Podpsrbg Euefx Aknogr • Cleaning of both square and radius surfaces • Unlimited memory capacity and easy operation thanks to the 10" LCD HMI control panel • Long service life with automatic lubrication system (activated after every 60 frames) • Linear guide system • Unique software allows very simple operation and programming • Brushed support table system for easy rotation of profiles • Easy profile programming (handwheel) • Adjustable working speeds to desired levels

Condition: used, Year of construction: 1989, MAKE GER, MADE IN SPAIN MODEL RS 10/60 YEAR TABLE LENGTH 1300.0 mm TABLE WIDTH 600.0 mm TRAVEL X AXIS: 1600.0 mm Y AXIS: 600.0 mm MAX DISTANCE (TABLE TO WHEEL) 800.0 mm MAX WORKPIECIE WEIGHT 1000 KGS GRINDING WHEEL SIZE 400.0 x 100.0 x 127.0 mm Podpfx Ajy Du N Uoknegr SPINDLE SPEED MAX 1500 RPM MACHINE DIMENSIONS 4600.0 x 2700 x 2600.0 mm MACHINE WEIGHT 7600 KGS PLUS ELECTROMAGNETIC CHUCK SIZE: 1000.0 X 600.0MM HYDRAULIC PACK COOLANT SYSTEM WHEEL MOUNTED DRESSER

Year of construction: 2021, condition: good (used), 1 x Box Taping Machine Model: AS523S Year: 2021 Pgsdpfx Aoy T Nbdeknjr

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 113L160577, travel distance X-axis: 1,270 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, feed length X-axis: 1,270 mm, feed length Y-axis: 700 mm, feed length Z-axis: 600 mm, feed rate X-axis: 11 m/min, feed rate Y-axis: 11 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 35 kVA, controller manufacturer: FANUC, controller model: SERIE 31I-MODEL B, workpiece length (max.): 1,400 mm, workpiece width (max.): 700 mm, workpiece height (max.): 500 mm, workpiece weight (max.): 1,800 kg, total height: 3,050 mm, total length: 3,700 mm, total width: 3,240 mm, table width: 1,400 mm, table length: 700 mm, table load: 1,800 kg, rotational speed (min.): 100 rpm, rotational speed (max.): 9,000 rpm, overall weight: 10,100 kg, spindle speed (min.): 100 rpm, spindle speed (max.): 9,000 rpm, operating hours of spindle: 7,883 h, coolant supply: 20 bar, number of spindles: 1, number of slots in tool magazine: 60, Equipment: documentation/manual, High-speed package, with optical scales on the X and Y axes. Psdpfx Aszlpgnoknegr

Year of construction: 2023, condition: new, INTERSONIK is established in 1988 and since then manufacturing industrial cleaning machines both ultrasonic type and sprayed type. INTERSONIK always has high standards and aims to provide solid and durable products to its customers. Ultrasonic washing machines are designed and manufactured with the 30 year of experience and engineering that belongs to INTERSONIK from A to Z. K model ultrasonic cleaning devices are perfect parts washing systems for degreasing and precise cleaning. Some Details About Ultrasonic Machines: -28 Khz ultrasonic frequency -AISI 304 or AISI 316 Stainless Steel -Automatic fill valve -Liquid level control Podpfx Akjd Iz Dnsnegr -Pump filter -Unlimited basket options -Unlimited size and number of tanks -Many other options and extras ultrasonic washing machine, ultrasonic cleaner, ultrasonic degreaser, ultrasonic for automotive, ultrasonic for coating industry, 28 Khz ultrasonic cleaner Please feel free to contact us for details and other choices.

Condition: new, Year of construction: 2025, warranty duration: 12 months, water tank capacity: 300 l, type of input current: three-phase, total width: 2,360 mm, total length: 970 mm, total height: 2,030 mm, input frequency: 50 Hz, DPF Filter Regeneration Machine - MOTSLER SLR Premium The MOTSLER SLR Premium is a high-quality, reliable, economical, and very user-friendly machine designed for the professional cleaning of DPF, FAP, GPF, SCR, DOC, EURO6 filters, as well as catalytic converters. It supports all filter sizes—from passenger cars, vans, trucks, to construction machinery and equipment. The unit is entirely made of stainless steel and built using high-quality components sourced from leading Polish and European manufacturers such as Schneider, Fatec, Weintek, Ebara, Calpeda, Eaton, Wieland, and Hager. The SLR Premium machine carries out the complete DPF cleaning process, which includes: initial measurement, cleaning, drying, final measurement, and concludes with a printed DPF cleaning report. Technical Specifications: - Device dimensions (L/W/H) [mm]: 2360 x 975 x 2031 - Chamber dimensions (L/W/H) [mm]: 1600 x 830 x 1090 - Machine construction: 304 stainless steel - Weight: 550 kg - Power supply: 3 x 400V 50 Hz - Max. power: 11 kW - Optimal power consumption: 6.9 kW - Circuit protection: 20 A - Tank capacity: 300 liters - Pump performance: 250 L/min - Hose diameter: 1.5” DN 40 - Water drain: 2” DN 50 - Drying temperature: 100 – 120°C - Water temperature: 10 – 50°C - Max. air flow (drying): 325 m3/h - Air pressure (drying): 300 mbar - Drying and cleaning: bidirectional manual - Contamination measurement: on dry and wet DPF filter - Filtration: 250 – 1 micron - Pre-filtration: 2 pre-filters - Filter replacement frequency: approx. every 40–100 cycles - Noise level: 70 dB Podpfx Astrmrioknogr - Min. ambient temperature: 3°C - Declarations of conformity: EC, CE Equipment: - Single-pipe SWS system - Professional PFS filtration system (cartridge replacement every 40–100 DPF filters) - 7” touchscreen display - Thermal printer for cleaning reports - Caster wheels - Adjustable leveling feet - Tempered glass windows - 2 cleaning hoses - 17 adapters for connecting DPF filters - 8 rubber seals for adapters - 4 DPF filter retainers - 4 adapter clamps - Inspection camera - Foam neutralizer - 2 pre-filters - Main filter cartridge - DPF CleanX cleaning fluid Equipment / Adapters: - All adapters for passenger cars and trucks - Set of rubber seals for adapters - DPF filter locks to prevent movement WHAT DISTINGUISHES THE SLR PREMIUM MACHINE? Build Quality: - Constructed entirely from stainless steel with components from leading European manufacturers: Schneider, Fatec, Weintek, Ebara, Calpeda, Eaton, Wieland, ensuring top-tier precision. Single-Pipe SWS System: - All processes are conducted through one hose, eliminating the need to stop the machine, open doors, or reconnect the DPF filter between cleaning, drying, and measurement hoses. PFS Filtration System: - Multi-stage filtration system featuring two reusable stainless steel pre-filters and a main filter with a 4.8 m² area, supporting from 40 to 100 DPF filters per cycle. Side Ventilation: - Enables operation in low-ceiling spaces. Steam does not condense on the machine’s top, avoiding water ingress into electronics, electrical short circuits, or machine damage.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Equipment: documentation/manual, Professional Spiral Duct Forming Machine – Ø80–1600 mm We are offering for sale a complete industrial machine for the production of round spiral ducts (SPIRO ducts) for HVAC, ventilation and dust extraction systems. We are the first owner. The machine was purchased directly from the manufacturer, professionally commissioned, configured and fine-tuned for production. It has only been used occasionally for our own production requirements and has never been operated in continuous or multi-shift mass production. The machine is fully operational, properly adjusted and ready for production. It is currently connected and can be demonstrated under actual production conditions, allowing the buyer to inspect the complete process and the quality of finished ducts before purchase. Key Features * working diameter range: Ø80–1600 mm * production speed: up to 60 m/min * installed power: 11.25 kW * galvanized steel: 0.4–1.2 mm * stainless steel: 0.4–0.7 mm * aluminium: 0.4–1.3 mm * pneumatic sheet metal strip decoiler * touchscreen control panel * automatic lubrication system * automatic forming angle adjustment * automatic rotary cutting * automatic fault detection * smooth ducts or single/double reinforcing beads * external spiral lock seam Psdpfezt Ni Ejx Aknsgr * machine weight: approx. 2,900 kg 39 Forming Heads Included The machine comes with an extensive set of 39 forming heads covering 22 diameters: Ø80 (1), Ø100 (2), Ø125 (3), Ø160 (3), Ø200 (3), Ø250 (3), Ø315 (3), Ø355 (2), Ø400 (2), Ø450 (2), Ø500 (2), Ø560 (2), Ø630 (2), Ø710 (1), Ø800 (1), Ø900 (1), Ø1000 (1), Ø1120 (1), Ø1250 (1), Ø1400 (1), Ø1500 (1), Ø1600 (1). The set therefore covers the full working range from Ø80 to Ø1600 mm, with additional heads for the most commonly produced diameters. Spare Parts Package A comprehensive package of spare and wear parts is included, such as forming and guiding components, lock-seaming rollers, pneumatic components, cutting knives/rotary cutting components and decoiler braking parts. This provides an important operational reserve and helps minimise downtime without having to immediately source essential parts internationally. Production-Ready + Training The buyer receives a fully configured and proven production machine, not an uncommissioned unit requiring extensive setup and adjustment. We provide on-site commissioning assistance and operator training at the buyer’s facility, including machine operation, forming head replacement, adjustment for different diameters and sheet thicknesses, maintenance and trial production. The machine can be inspected and demonstrated during actual spiral duct production before purchase. Approximately 100 steel stacking racks (Maurack type) for storing and transporting finished ducts are also available and can be purchased together with the machine. The machine is located in Poland. Transport can be arranged individually. Price: upon request / subject to negotiation. For further information, photos, videos or to arrange a live machine demonstration, please contact us directly.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 10,294 h, functionality: fully functional, machine/vehicle number: P087WH855, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, table load: 300 kg, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 700 mm Travel range, Y-axis: 400 mm Travel range, Z-axis: 330 mm Rapid traverse speed: 54 m/min Podpfozul Tcex Aknjgr Spindle speed: 100–10,000 RPM Distance spindle–baseplate: 250–580 mm Main spindle power: 5.5 kW Table area: 650 × 400 mm Table load: 300 kg Tool positions: 21 MACHINE DETAILS Dimensions & Weight Dimensions: 1,565 × 2,027 × 2,336 mm Machine weight: approx. 2,200 kg Control system operating hours: 24,164 h Operating hours: 10,295 h EQUIPMENT Central oil interval lubrication 100 mm column extension Interior lighting 16 additional I/O Rapid traverse with bell-shaped acceleration and deceleration Manual handwheel feed Directory display from memory card 1,000 storable programs Multilingual display Thermal compensation of XYZ axes Parameter back-up function Retraction cycle for tapping without a collet MANUAL GUIDE Background editing Extended part program editing Coordinate system selection G92 Workpiece coordinate system G52–G59 48 additional workpiece coordinate systems G54.1 Return to reference point G28 Quick Editor Setup file Production counter Tool correction memory C for D/H code and wear Thread cutting without a collet M29 Subprogram call M98/M198/M99 Customer macro B G65, G66/G67 Drilling cycles G73, G74, G76, G81, G89/G80 Coordinate system rotation G68/G69 Circular interpolation with R programming AI Contour Control I G05.1 Helical interpolation Skip function G31 Multi-step skip G31 P1–P4 Check of travel limit before movement Check of stored travel limit 1 Check of stored travel limit 2 G22/G23 Customer PMC Real-time customer macro

Condition: new, The rotary type cleaning unit allow to process parts directly on board the work-cells avoiding costly transport operations. The transfer of the components takes place with an in-built rotary index transfer system which guarantees satellite positioning at loading / unloading and inner operations. Considerable flexibility in the change of costumized jigs as components holders. Elimination of packaging costs and transport costs Re-equipment of the plant in a very short time Number of satellites to be selected in accordance with a defined and accurate washing, blowing and drying process; These plants are fit for the treatment with aqueous detergent solutions, as: Critical machined parts and delicate parts with blind holes and threaten holes, compoenent as: valve bodies, automatic actuators, burner bodies, water meters, friction flywheels, gas valves, hydraulic, pneumatic multichannel distributorss. a.s.o.). Podpfx Aswdfyqeknegr

Condition: used, More technical data on request Pjdpol Iir Isfx Aknegr

Condition: good (used), Year of construction: 2011, 400mm swing over bed, 216mm Swing over the Cross-slide, 760mm between centres, 54mm spindle bore, 2500rpm spindle, 5.75kW Spindle Motor, Pgjdpfsucdt Asx Aknjr Prototrak SLX Control, 3 jaw chuck, auto toolpost, Tailstock, Coolant

Year of construction: 2025, condition: new, functionality: fully functional, load capacity: 75 kg, The Wave 450 parts cleaning unit is a very flexible vacuum assisted degreasing machine able to perform an high degree of parts decontamination. All the operations such degreasing cycle as spray, immersion jets, ultrasonic, as well the distillation and filtration process and parts drying treatment are sequenced in automatic way and in a total vacuum ambient. The Wave 450 machine can operate with: Modified Alcohol solvents (MA) / Hydrocarbons Class III (H-III) / Chlorinated (PER) Those solvents are specifically used when the demand calls for a strong degreasing phase, evaporate completely without leaving debris residues on the processed parts. Psdpfx Akewc Sdaonjgr Standard features  Continuous solvent distillation  Full solvent distillation  Sludge stripping 2nd distiller Oil/solvent separation  Full solvent filtration at each cycle  Chip drying and deodorizing before emptying by the operator  Chip drying and deodorizing before opening / cleaning by the operator  Vacuum / solvent charging - discharging system  Water/solvent separation Distillation The distillation of the solvent enalble to maintain unchanged the degreasing power of the solvent. All our systems offer the double stage distiller as standard, guaranteeing the separation between solvent and oils, further expulsion of water takes place in the water separator. PLC S7 and HMI 12" Siemens are a standard feature The machine is compliant to Industry 4.0 and so Industry 5.0. Basket dimension is: mm 480 x 300 x 200 H

Condition: new, Year of construction: 2025, operating hours: 24 h, functionality: fully functional, DOLFİN-PYM2 series parts washing machines are industrial purposed parts cleaning devices that are used before and after revision, particularly in repair and maintenance services. While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labour. It works automatically in accordance with the temperature and time values that are set during operation. In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley. Pgsdpfx Aov Sa I Tjkner

Condition: used, machine/vehicle number: 005583, X axis working area: 3680 mm Y axis working area: 2040 mm Working Table: Flat table Main Electrospindle power: 13 KW Number of controlled axes: 3 axes Pgedpjtwgirefx Aknsr Total number of drilling spindles: 11 Total number of tool changer positions: 12

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH log washer (Pallet Washer) is a high-performance washing machine developed specifically for cleaning large aggregates with high clay content. Designed to deliver maximum efficiency under demanding working conditions, this system effectively removes dirt from the material, ensuring high-quality aggregate production in construction, mining, and recycling facilities. Its twin-shaft design creates a powerful scrubbing effect on the material, breaking down even the most stubborn dirt and ensuring clean, ready-to-use material. The CONSTMACH pallet washer offers operators high flexibility with its adjustable shaft angle and speed control, enabling optimal washing performance for different types of aggregates. Its robust body, high-strength material usage, and easy maintenance ensure long-lasting operation. Furthermore, it can process hundreds of tons of material per hour without compromising cleaning quality, even in facilities requiring high capacity. This equipment improves the quality of aggregates used in construction projects, optimizes mineral separation processes in mining, and contributes to the production of reusable materials in recycling plants. Effective removal of foreign matter extends the life of subsequent crushing and screening equipment and reduces operating costs. Log Washer (Pallet Washer – Coarse Material Washer) Technical Specifications Machine Size: 2000 x 7000 mm (Double Shaft) Psdexp Urdspfx Aknogr Electric Motor Power: 2 x 37 kW, GAMAK Brand, IE3 Efficiency Class, 1500 rpm Feed Size: 0 - 50 mm Main Body Material: S235JR A1 Quality, 8 mm Rolled Sheet Rotation Speed: 15 - 25 rpm Helix: Double Shaft Spiral Pallets, S235JR, 8 mm Sheet, Cast Arms Resistant to Wear and Hardox Coating Shaft: Cr-Ni-Mo Alloy Steel Body: GS52 Steel Casting Bearings: SKF or FAG, Heavy Duty Roller Bearings Production Capacity: 200 - 400 t/h Weight: 24,000 kg Why Should You Choose CONSTMACH Log Washer (Pallet Washer – Coarse Material Washer)? CONSTMACH combines quality, durability, and efficiency with its log washer systems developed through years of experience. Each component is designed for long life and minimal maintenance. Thanks to its high-capacity washing performance, energy efficiency, and ease of use, you will get the most out of your investment in the shortest time possible. CONSTMACH also guarantees the uninterrupted operation of your business with its after-sales support and spare parts services. If you are looking for a reliable solution for clean, solid, and high-quality aggregates, the CONSTMACH pallet washer is the right choice. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting

Condition: used, Year of construction: 2019, operating hours: 692 h, travel distance X-axis: 4,500 mm, Third-generation CMA drilling center for steel profiles and structural parts, built 2019 with only approx. 692 operating hours. OMRON touchscreen CNC with dialog and DIN/ISO programming, 4,500 mm X-travel, BT40 spindle 50-4,000 rpm (13.1 kW, up to 125 Nm) for solid drilling up to dia. 36 mm and tapping up to M24 in steel. Pendulum operation for loading during machining, 10-position tool changer, Z-Reader height probing and coolant through spindle. Fully functional. Podpfjzmyzfjx Aknogr

Condition: as good as new (ex-display), Year of construction: 2023, heating capacity: 7 kW (9.52 HP), tank capacity: 350 l, inner dimension height: 600 mm, inner dimension length: 900 mm, inner dimension width: 650 mm, input voltage: 400 V, input frequency: 28,000 Hz, High power ultrasonic cleaning machine Ultratecno EASY-350L. Demo machine from 2023 used for presentations and exhibitions by the distributor in Poland. Excellent condition, like new. Highest quality of components and several innovative solutions backed by 50 years of experience in manufacturing of ultrasonic cleaning machines. Included pneumatic elevator with platform for max. load 125 kg (max. static load 250 kg). Oil separation tank with pump. Special 50mm insulation. Working chamber dimensions: 900 x 650 x 600 mm. Ultrasound frequency: 28 kHz. Pgodpfx Akoq Ruxmensr Ultrasound power: 2 kW. More technical information included in attached technical sheet. Manufactured in Spain.