Used Thermos for sale (615)

Condition: used, This listing is for a Thermo Fisher Scientific Labofuge 400R refrigerated Centrifuge. The unit is in full working condition and is ready for immidate realese. The Thermo Fisher Scientific Labofuge 400R is an air-cooled, quiet operating centrifuge, with temperature control for sensitive samples. This versatile refrigerated centrifuge has a temperature range between 0-40°C to help ensure low temperatures even during an extended run or when running at high speeds. The microprocessor control then monitors temperatures to prevent sample freezing. The wide range of compatible rotors, available from Thermo, allows users to fit most tubes. Easy Controls: Fjdpfxoxx Awge Ahvegf The microprocessor control panel is set up front for easy access, with individual indicators showing temperature, speed, and RCF settings, as well as run time. Users can set their desired parameters quickly through the touchpad controls, choose a quick run for short spins, and engage a soft start/soft break for gentle processing of more sensitive samples. Spins are powered by an induction drive that’s maintenance-free for worry-free operation. Safety Features: The automatic imbalance detector will cut out the drive if the rotor is out of balance to protect components and your work. There is also rotor over speed protection to help reduce wear on components. The steel jacket system and durable construction help the system to comply with IEC 1010. The Labofuge 400R uses a highly effective cooling environmentally friendly technology, using standstill cooling, and R134A refrigerant.

Condition: used, This listing is for a Thermo Scientific FiberLite F21-8x50y Centrifuge Rotor. The unit is in full working condition and is ready for immediate release. The Thermo Scientific FiberLite F21-8x50y Centrifuge Rotor is a versatile and high-performance laboratory tool suitable for a wide range of applications. Here’s an organized overview of its key features, specifications, and applications: Key Features and Specifications Design and Capacity: Holds up to 8 tubes Capacity of 50 mL per tube Material: Constructed from lightweight, corrosion-resistant materials such as carbon fibre and aluminium Configuration: Fixed-angle design, with tubes positioned at a constant angle relative to the axis of rotation Compatibility: Works with various Thermo Scientific centrifuges, including: Heraeus Megafuge series Sorvall Legend series Safety Features: Automatic rotor recognition system Lid-locking mechanism to prevent accidental opening during operation Fsdpfoxx Appex Ahvjgf Performance: Maximum speed: 21,000 rpm Maximum RCF: 52,400 x g Weight: Net weight of the rotor: 9.9 lb (4.49 kg) Biocontainment: Features a bioseal lid to ensure samples remain contained and to protect users from hazardous chemicals Environmental Considerations: Energy-efficient design with reduced waste production Key Applications The FiberLite F21-8x50y Centrifuge Rotor is ideal for various laboratory procedures, including: Subcellular Separations: Isolating cellular components for research and analysis. Bacteria Pelleting: Concentrating bacterial cultures for further experiments. Lysate Clarification: Removing debris from cell lysates to obtain clear samples. Cell Membrane Studies: Analyzing the properties and functions of cell membranes. Sucrose Gradient Isolation: Mitochondria Endoplasmic reticulum Gradient separation of cells using solutions like Percoll, Ficoll, Optiprep, or Nycodenz This rotor combines advanced technology with practical safety and efficiency features, making it suitable for a variety of applications in research, clinical, and industrial laboratories.

Condition: used, This listing is for the Thermo Scientific A8150001 Gemini AS Heated Slide Stainer The unit is in full working condition and is ready for immediate use The Thermo Scientific Gemini AS Automated Slide Stainer (Model A81500001) is a high-performance staining system designed for histology and pathology laboratories requiring reliable and reproducible slide preparation. This automated staining instrument simplifies laboratory workflows by processing multiple slide racks simultaneously while maintaining consistent staining quality. The A81500001 model includes integrated heated stations, allowing slides to be dried efficiently during staining protocols. The Gemini AS supports a wide range of histological staining procedures and can be programmed for customised protocols, making it suitable for routine staining as well as specialised laboratory applications. Its high capacity and flexible configuration make it ideal for laboratories handling moderate to high sample volumes. With multiple reagent stations and automated timing control, the system reduces manual handling and ensures consistent staining results, improving overall laboratory productivity. Key Features Automated slide staining system for histology laboratories 5 heated stations for slide drying Fgedpfxeyuylhs Ahvjf Capacity for up to 12 slide racks Each rack holds up to 20 slides Up to 26 reagent stations Programmable staining protocols Consistent and reproducible results Ideal for pathology, research, and clinical laboratories

Condition: used, This listing is for a Thermo Scientific TX-400 Centrifuge Rotor with Buckets. The unit is in full working condition and is ready for immediate release. Supplied with x4- 75003655 Round Buckets Maximize the efficiency of your centrifugation processes with the TX-400 rotor, specifically designed for use with various Thermo Scientific centrifuges. Key Features: Capacity: Accommodates 4 x 400 mL samples, making it suitable for larger volumes in a single run. Fedpoxxzatefx Ahvogf Impressive RCF: Achieves a maximum relative centrifugal force (RCF) of 4696 x g, allowing for effective sedimentation of a variety of sample types. Speed Capabilities: Operates at a maximum speed of 5000 rpm, providing flexibility for different centrifugation protocols. Tube Specifications: Diameter: 80 mm for standard tubes. Length: Capable of holding tubes up to 125 mm in length. Radius: Designed with a radius of 16.8 cm for optimal performance. Type: Features a swinging bucket design, allowing for smooth and efficient separation as the buckets swing outward during centrifugation. Biocontainment Certified: The rotor is certified for biocontainment by CAMR, ensuring safety when working with biological samples. Compatibility: Specifically designed for use with the following Thermo Scientific centrifuges: Sorvall Legend X1 Sorvall ST 16 Multifuge X1 Megafuge 16 SL 16

Condition: used, This listing is for a Thermo Scientific Orion AQUAfast Colorimeter. The unit is in full working condition and is ready for immediate release. The Thermo Scientific Orion AQUAfast Colorimeter is a robust and versatile multi-parameter instrument designed for efficient water and wastewater analysis. With over 90 pre-programmed methods, including tests for key nutrients such as total nitrogen and total phosphate, this colorimeter offers precise and reliable results for a wide range of testing needs. Ideal for both laboratory and field use, the AQUAfast colorimeter features automatic wavelength selection, a waterproof design, and user-friendly features to simplify and enhance the testing process. Key Features: Rugged Waterproof Design: With an IP67 rating, this colorimeter is built for durable performance in challenging environments, making it perfect for both field and laboratory applications. Extensive Preprogrammed Methods: Includes over 90 preprogrammed methods for common water and wastewater parameters, such as total nitrogen and total phosphate, ensuring easy and accurate testing for a variety of needs. Automatic Wavelength Selection: The colorimeter automatically selects from 6 LED wavelengths (430, 530, 560, 580, 610, and 660 nm) to match the optimal wavelength for each test parameter, improving efficiency and accuracy. Countdown Timer: The built-in countdown timer ensures precise and consistent timing for all tests, helping users achieve repeatable results with ease. Data Storage: Capable of storing up to 1000 test results with a date and time stamp for easy data management and review. Long Battery Life: Enjoy extended operation with up to 26 hours of continuous use or 3500 tests, making it ideal for long fieldwork sessions. Multilingual User Interface: The interface supports multiple languages, including English, French, German, Italian, Polish, Portuguese, and Spanish, making it accessible for a wide range of users. Fodoxx Acpopfx Ahvsgf Compatible with Thermo Scientific Orion Reagents: Use with Thermo Scientific Orion reagents ensures high accuracy and consistency in test results. Specifications: Wavelengths: 6 LED wavelengths (430, 530, 560, 580, 610, and 660 nm) Preprogrammed Methods: Over 90 methods for common water/wastewater analysis Data Storage: 1000 readings with date/time stamp Battery Life: Up to 26 hours continuous use or 3500 tests User Interface: Multilingual (English, French, German, Italian, Polish, Portuguese, Spanish) Waterproof Rating: IP67 Countdown Timer: Yes, for precise test control Dimensions: Portable and lightweight for field use (exact dimensions available on request)

Condition: used, This listing is for the Thermo Scientific Finnpipette F1 Pipette 8 Channel The unit is in full working condition and is ready for immediate use The Thermo Scientific Finnpipette F1 manual pipettes designed for precision, ergonomics, and ease of use in laboratory settings. Available here in a multichannel configurations, the Finnpipette F1 caters to a wide range of liquid handling needs. Key Features Ergonomic Design: Lightweight handle with low plunger and tip attachment forces to reduce the risk of repetitive strain injuries (RSI). Silent Volume Adjustment: Features a silent and lighter volume adjustment mechanism with over 50% lower forces compared to earlier models. Secure Volume Lock: A secure volume setting prevents undesirable volume drift during operation. Simply lift the plunger up to set volume and press down to lock in place with minimum effort. Adjustable Finger Rest: The 120° adjustable finger rest accommodates both right- and left-handed users, allowing the hand to relax during pipetting cycles. Fgedpfx Asxl Ezhjhvsf Super Blow-out: 150% increase in air boost to ensure efficient delivery of micro-volumes and prevent capillary action in 50 µL models and below. Compatible Tips: Designed to work seamlessly with Thermo Scientific Finntip pipette tips for optimal performance.

Condition: used, This listing is for the Thermo Scientific Heraeus Biofuge Primo The unit is in full working condition and is ready for immediate release The Thermo Scientific Heraeus Biofuge Primo R Centrifuge enables high-performance, small-capacity processing with a compact design. It supports optional rotors and accessories with top speeds up to 15,000 rpm, making it a versatile, space-saving solution for laboratories that require both speed and cooling. Key Features: Refrigerated, benchtop centrifuge with temperature control from -9°C to +40°C Automatic rotor recognition and imbalance detection for safety and ease of use Uniform temperature control for sample integrity Compact design, ideal for small medical labs, biochemistry and molecular biology research, and routine industrial analysis Typical Applications: Sedimentation of cells (algae, yeast, bacteria, etc.) Centrifugation of cell organelles and fragments Fodpfxsxv A Ugo Ahvjgf DNA and protein precipitate preparation Blood and urine analysis Centrifugation of microliter tube test series

Condition: used, This listing is for a Thermo Scientific Orion Star A211 Bench Top pH Meter. The unit is in full working condition and is ready for immediate release. The Orion Star A211 is designed for accurate and convenient pH measurement, making it essential for various laboratory applications. Key Features: Versatile Measurements: Capable of measuring pH, mV, ORP, and temperature, catering to a wide range of analytical needs Advanced Calibration: Offers up to 5-point pH calibration with automatic recognition for common buffer standards (USA/NIST and DIN), ensuring high accuracy. Data Logging: Can log up to 2000 data point sets with time and date stamps, facilitating easy tracking of measurements for future reference. Data Transfer Capabilities: Easily transfer calibration and data logs via USB or RS232 to a printer or computer, streamlining data management and reporting. User-Friendly Design: Includes an electrode stand for convenient placement and storage of sensors, along with a comprehensive keypad featuring menu-specific function keys for intuitive operation. Multilingual Support: Supports multiple languages (English, Spanish, French, Italian, German, and Chinese), making it accessible for diverse users. Backlit Graphic LCD Display: Fgodpfxsxxy I Ao Ahvef Displays critical information, including pH/mV/RmV, temperature, electrode status, time, date, sample ID, user ID, and calibration points, ensuring that users have real-time access to vital data. Specifications: pH Range: -2 to 20 mV Range: ±2000.0 mV Temperature Range: -5°C to 105°C Resolution: pH: 0.001, 0.01, 0.1 mV: 0.1 Temperature: 0.1°C Accuracy: pH: ±0.002 mV: ±0.2 mV or ±0.05% of reading (whichever is greater) Calibration Points: 1 to 5 Data Management: Ability to transfer single, range, or all data points to a printer or computer.

Condition: used, This listing is for a Thermo Scieintific Savant SPD121P SpeedVac Vacuum Concentrator. The unit is in full working condition and is ready for immediate release. The Thermo Scientific Savant SPD121P SpeedVac Vacuum Concentrator is an advanced centrifugal evaporator designed to efficiently remove solvents and concentrate samples while preserving their integrity. Here’s a closer look at its features, specifications, and applications: Key Features: PTFE-Coated Chamber: The deep aluminium chamber is coated with PTFE, offering high durability and corrosion resistance, making it ideal for handling a variety of solvents. Fjdpoxxz H Tsfx Ahvsgf The built-in vacuum gauge provides real-time monitoring of vacuum levels, ensuring precise control during the evaporation process. User-Friendly Time/Temperature Controls: Equipped with a membrane touch pad for easy programming, allowing users to easily set time and temperature parameters. Variable Drying Times: Drying temperatures can be adjusted from 35°C to 80°C in 5°C increments, giving users flexibility for different types of samples. Endpoint Mode: This feature automatically terminates the process when a pre-set vacuum level is reached, ensuring consistent concentration results. Glass Safety Lids: Standard glass lids improve drying efficiency by applying radiant IR heat to samples, accelerating the evaporation process. Chemical Trap Kit: Comes with disposable cartridges equipped with colour indicators to trap acids and water vapour, safeguarding the vacuum system from contamination. Tubing and Fitting Kit: Includes 4 feet of clear, thick-walled vacuum tubing, two clamps, and a cutter, making setup straightforward and allowing for immediate use. Applications: Removing Ethyl Acetate: Widely used for evaporating ethyl acetate from samples, which is crucial in applications such as CAT assays and analysing drug metabolites from solid phase extracts. Biomolecular Research: Ideal for concentrating samples in aqueous and mild organic solvents, facilitating research in biomolecular studies where precise sample preparation is necessary.

Condition: excellent (used), NITON XL3t 980 GOLDD+ – a portable X-ray analyzer featuring a next-generation SDD detector with GOLDD technology. GOLDD technology enables significant improvements in accuracy and measurement time. This detector is 10 times faster than a conventional Si-PIN detector and up to 3 times more accurate than a conventional SDD detector. The NITON XL3t 980 GOLDD+ analyzer achieves a unique combination of a 50kV X-ray tube with optimized measurement geometry and a patented processor and software. It allows for fast and accurate, simultaneous analysis of up to 28 elements: Mg, Al, Si, P, S, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Se, Zr, Nb, Mo, Hf, Ta, W, Re, Pb, Bi, Ag, Pd, Sn, Sb. Additionally, the analyzer enables the analysis of precious metals: Au, Pt, Ir, Ru, Rh. Analysis of light elements such as Mg, Al, Si, and P without the use of helium is possible thanks to a special set of filters and a highly sensitive detector. Without using helium, the determination of light elements is possible for concentrations above 0.x%. A large library of spectral libraries of alloys enables the identification of stainless steels, tool steels, chrome-molybdenum steels, and alloys based on nickel, cobalt alloys, copper-based alloys, titanium alloys, zinc alloys, zirconium alloys, and aluminum alloys. The analyzer provides very fast measurements. The analysis time for typical alloys is less than 3 seconds. An additional library for the analysis of light elements in the helium mode allows for the segregation and sorting of aluminum alloys, such as: casting alloys depending on the silicon (Si) or magnesium (Mg) content, aluminum (Al), silicon (Si), and phosphorus (P) content in bronzes, aluminum (Al) content in titanium alloys, magnesium alloys (Mg), zinc alloys with aluminum (Al). The analyzer enables the analysis of: all alloys based on iron (0.00x% – 100%) and non-ferrous metals (0.00x% – 100%) as well as rare metals Hf, Ta, Re (0.00x – 100%) precious metal alloys Au, Ag, Pd, Pt, Ir (0.00x% -100%). The NITON XL3t 980 GOLDD+ analyzer operates on BASIC PARAMETERS, meaning it calculates the percentage content of elements based on a mathematical equation. The analyzer also allows for the development of its own analytical programs: an identification program that allows you to assign a name, symbol, number, etc. to a known sample, and subsequent samples will be identified by this name B23Zpkshvo a program for quantitative chemical analysis (SuperChem Teach Mode) – based on your own standards, you can create your own calibration curves for quantitative analysis. The analyzer has a large, user-friendly, touch screen. The screen is color and tiltable, which makes it easier to read the results while working in the field, integrated scanner, backlit alphanumeric identification codes for samples. The software allows you to store up to 10,000 results in the analyzer's memory or transfer them to a computer. Connecting the device to a computer and controlling its operation via a computer is possible using a traditional cable or wirelessly via Bluetooth. Fodpfxezlccie Ahvsgf It is supplied with two, interchangeable batteries. One battery allows for continuous operation for 8-10 hours without the need for charging. It has two libraries: 900 and 800.

Condition: used, This listing is for a Thermo Orion EZ Flash II Fjdpfxsxzhr Us Ahvegf

Condition: used, This listing is for a Thermo Labsystems Multiskan Ascent Microplate Reader The Thermo Labsystems Multiskan Ascent is an advanced, compact, one-channel vertical light path filter photometer designed to perform standard photometric measurements. The measurement types include end point, two point and kinetic measurements. Due to the innovative optical system of the Multiskan Ascent, the instrument can read both 96- and 384-well microplates and is linear to 4.0A. The instrument is a rapid reading microplate reader. Fsdpfx Asxzhctohvegf

Condition: used, This listing is for a Thermo Electron Corporation CR 4i Refrigerated Centrifuge Specifications Capacity: Swing-out rotor: (4 x 750 mL) 3000 mL Fixed angle rotor: (8 x100 mL) 800 mL Maximum load: 3.6 kg Fgodpjxzhhijfx Ahvof Speed range: 500 to 7800 rpm RCF range: 20 to 9900 x g Temperature range: -9°C to 40°C Dimensions (H x W x D): 45 x 85 x 66 cm (16.5″ x 33.5″ x 26″) Weight: 106 kg (233 lbs) Electrical: 120V, 60 Hz

Condition: used, Electronic crimpers provide secure, reproducible crimps. A single press of the button both closes the crimping jaws to attach the seal and opens them to release the vial. Decappers provide quick and easy removal with a single press of the operation button. Adjustable crimp settings allow compatiblity with standard aluminimum, pressure-release, tin-plated steel and bimetal two-piece seals† Ergonomic design reduces wrist strain Controls and indicator lights are visible and accessible for left- or right-handed operation Crimpers and decappers can be operated while plugged in and recharging Vials can be crimped or decapped while they remain in most standard removable sample trays Crimp-force sensing automatically determines when a proper seal has been formed and opens the jaws to release the vial Fjdpfx Ahjxzhy Sovegf

Condition: used, This listing is for a Thermo Shandon Consul Coverslipper The Shandon Consul permanently covers slide-mounted specimens using routinely accepted glass coverslips. This is the only method truly compatible with the optics of today's high-performance microscopes and image analysis systems Dimensions (H x W x D)* 23.6” x 27.2” x 20” (60 x 69 x 51 cm) *Clearance Height (hood up) is 40.9” (103.8 cm). Weight 121 lbs. (55 kg) Power Requirements 110-120V or 220-240V, 50/60Hz; 100 VA Fodjxzhdqopfx Ahvogf

Condition: used, This listing is for a Thermo Electron Corporation Shandon Histocentre 3 Coldplate Thermo Electron Corporation Shandon Histocentre 3 Coldplate is the cold-plate module of the Thermo Electron Corporation Shandon Histocentre 3 tissue embedding system — a piece of lab equipment used in histology labs for preparing tissue specimens for microscopic examination. It works in combination with the embedding unit but can also operate as a standalone cooling surface Fgjdpfexzhgxex Ahvsf

Condition: used, This listing is for 1 of 2 Grant-Bio PHMP Thermo-Shaker Excellent temperatures uniformity across the platform/microplate (patented bi-directional heating of microplates) combined with variable speed and variable temperature produces the ideal thermoshaker for microplate incubations. Can be used with all types of standard depth microplates and offers three devices in one for maximum versatility and efficiency. A microplate thermoshaker A compact benchtop incubator without shaking A microplate shaker in cold or ambient temperatures Features Temperature setting range: + 25°C to 100°C Temperature stability ± 0.1°C, temperature uniformity ± 0.2°C due to the bi-directional heating system (platform and lid) Shaking speed: 250 to 1200rpm Rapid heat-up Fgodpfx Ajxzgvfohvef Continuous or timed operation, with alarm buzzer and automatic switch-off facility Choice of two models with capacity for two (PHMP) or four (PHMP-4) 96- or 384-well microplates The heated lid completely covers the flat heating plate to provide bi-directional heating and excellent temperature stability and uniformity, whilst preventing condensation Combination of bi-directional heating and powerful orbital shaking capability produces the maximum yield from incubations Very easy to operate, with simple set-up of temperature, shaking speed and time via push buttons and the 2-line LCD status display Dimensions (h x d x w) - 125 x 250 x 265mm Temperature range - +25 to 60°C Temperature control range - Ambient +5 to 60°C Stability - 0.1°C Uniformity - 0.25°C Display - 2 line x 16 character LCD Shaking speed - 250 to 1200rmp Speed setting resolution - Increment 10rpm Average heat up speed - 12 minutes from 25 to 37,35 minutes from 25 to 60 Maximum height of microplates - 18mm Capacity - 2 microplates Orbit diameter - 2mm Timer - (with auto-off and audible alarm) 1 minute to 96 hours (1 minute increment) External power supply - Input AC 120-230V, 50/60Hz Output DC 12V Power consumption - 40W (3.3A) Weight - 6.1kg

Condition: good (used), Year of construction: 2015, Used thermocontainer; however, in exceptionally good condition, ready for immediate use Type designation: C-780ü (Various thermocontainers in stock, with capacities from 580 liters to 1170 liters, see additional photos) Technical data Interior: 610 x 810 x 1570 mm Exterior: 735 x 955 x 1900 mm Weight: approx. 98 kg Capacity in liters: approx. 780 With sliding rails for the grating Features Locking mechanism in the center of the door 2 lateral handles 1 folding handle in the door recess Rolling chassis with 108 mm rollers, PA, suitable for cold storage Door latch Inner tub with sliding rails Angled corner supports with edging PE sheets (2 mm thickness), light blue Profiled deflector plates (3-sided) 2 fixed wheels, 2 swivel wheels, can be locked with a padlock Load capacity up to approx. 400 kg RECONDITIONED Final cleaning must be carried out by the buyer The offer includes one container Color may vary depending on stock availability Approx. 100 units in stock We offer the possibility of inspecting the item on Tuesdays and Thursdays between 9 am and 4 pm, by prior telephone appointment. If required, the item can be taken away immediately. Fjdpfxjd Syg So Ahvogf Unless explicitly stated otherwise, this offer refers to used goods. The items have been visually inspected and are technically sound. Shelves and cooling plates are not included in the offer. However, these are also available from us. Due to time constraints, we can only provide answers regarding this item if you include a telephone number in your request. Price is stated net per piece, plus the currently applicable VAT. All offers are ex warehouse 47441 Moers. If you would like the item to be shipped, please contact us to discuss packaging and shipping costs. (Photos are similar, as we do not depict each individual item)

Year of construction: 2019, condition: used, Thermo Fisher Scientific Versa Weigh GVW0 V312 – Automatic Checkweigher Manufacturer: Thermo Scientific Model: Versa Weigh GVW0 V312 Serial number: E307 Year of manufacture: 2019 Machine type: Automatic checkweigher Description The Thermo Scientific Versa Weigh GVW0 V312 is a high-precision automatic checkweigher designed for dynamic inline weight control in modern production and packaging lines. The system ensures accurate weighing and compliance with strict quality standards. This checkweigher is built for high-speed production environments and is commonly used in food, pharmaceutical, and consumer goods industries. Technical Specifications - Manufacturer: Thermo Scientific - Model: Versa Weigh GVW0 V312 - Serial number: E307 - Year: 2019 - Supply voltage: 230 VAC - Frequency: 50–60 Hz - Power consumption: 600 W - Accuracy class: XIII (1) - Operating temperature: 0 – 40 °C Weighing Specifications - Minimum product weight: 35 g - Maximum product weight: 300 g - Scale interval: e = d = 0.5 g - Maximum throughput: 100 ppm (products per minute) - Maximum belt speed: 0.70 m/s Key Features Fgedpfx Ahjyt Hv Rjvsf - High-precision dynamic inline weighing - Designed for high-speed production lines - Compact hygienic industrial design - Suitable for integration into automated packaging systems - Reliable operation in demanding production environments Applications - Food packaging lines - Pharmaceutical production - Cosmetics and consumer goods - Quality control in automated processing lines Condition Used

Year of construction: 2003, condition: ready for operation (used), Vacuum sealing machine with automatic feeding of pre-formed trays, in a modified atmosphere, with the option of sealing only or gas flushing only (OXYGEN and BIOGON). For rigid polystyrene trays, with flexible plastic closure. Feeding belt with three loading positions. Prepared for SKIN packaging. Maximum tray dimensions: single 390 x 270 x h120mm, double 270 x 180 x h120mm, triple 270 x 110 x h120mm. INCLUDES a single mold for trays with dimensions 240 x 180 x h60mm (AERPACK B31-55). Adjustable sealing temperature up to 200°C. Fsdpfx Asza D Tgohvsgf Production of up to 15 cycles/min with sealing only. Vacuum pump included. INSTRUCTION MANUAL, OPERATING PANEL MANUAL, and ELECTRICAL DIAGRAMS are AVAILABLE.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Automatic vacuum sealing machine for packaging trays in a modified atmosphere, with the option of sealing only or using gas (OXYGEN and BIOGON). For rigid polystyrene trays, with flexible plastic closure. Eight-position infeed conveyor, designed for two molds operating in a simultaneous cycle, and with the option of using molds for single or multiple trays. Maximum tray dimensions: single 390 x 270 x h120mm, double 270 x 180 x h120mm, triple 270 x 108 x h120mm. INCLUDES two molds for trays with dimensions 210 x 125 x h50mm (LINPAC 12-47). Adjustable sealing temperature up to 200°C. Production up to 8 cycles/min. MANUAL version AVAILABLE. Fgodpfx Ahoza D R Sovsf

Condition: new, THERMO HOOD COVER for ROLLING TROLLEY / Very sturdy with 2x Velcro fastenings Internal item no.: TH_180 Suitable, among others, for: mesh rolling trolleys 810x720x height up to 1800 mm Fgjdpfsyzxb Nex Ahvsf Currently 200 covers in stock Item is new Seen new price: €199 Photos are sample photos. Trolleys, frames, and rolling trolleys are also available from us.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 2,000 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, number of axes: 4, This 4-axis VOORTMAN VACAM VCS Thermo was manufactured in 2013. It features a working length of 3000 mm and a working width of 1500 mm, equipped with a Kjellberg HiFocus 280i plasma cutting unit capable of cutting up to 70 mm thickness. The machine offers a cutting speed range of approximately 0 – 5200 mm/min. If you are looking to get high-quality plasma cutting capabilities, consider the VOORTMAN VACAM VCS Thermo machine we have for sale. Contact us for further details. • Working area: 3000 mm (length) x 1500 mm (width) • Machine structure: Heavy steel frame construction; portal gantry design • Material support: Sectional support bed • Plasma cutting unit: Kjellberg HiFocus 280i • Max plasma thickness: up to approx. 70 mm • Cutting capacity (steel): 6 / 12 / 20 / 25 / 30 / 40 / 50 / 70 mm • Cutting speed range: approx. 0–5200 mm/min • Positioning speed: approx. 12,000 mm/min • Positioning accuracy: ±0.1 mm • Control system: VACAM CNC control • Software: VACAM Machine Edition; VACAD; VANEST • Industrial PC: Intel Core 2 Duo; 2 GB RAM; SSD storage; Ethernet connection; touchscreen monitor; keyboard; USB ports • Automatic torch height control: HT4000 PCS • Laser pointer: Yes • Electrical connection: 230 V, 1 phase, 50 Hz • Compressed air requirement: Operating pressure approx. 6 bar • Noise level (idle): approx. 70 dB • Safety equipment: Emergency stop buttons; emergency stop cable; protective safety systems • Material types: Steel; structural steel; sheet metal Additional equipment • TEKA Filtercube 4H extraction unit (filter system) Fgsdpfx Ahoyu Th Aovsf

Condition: good (used), Year of construction: 2000, operating hours: 100 h, functionality: fully functional, TERM MIN FM76 heat-sealing packaging machine. Used for packaging containers on cardboard trays. Fsdpfx Ajzac N Hehvegf

Year of construction: 2004, condition: ready for operation (used), Max. working width: 1000mm, feed rate: 5-20m/min, height: 2200mm, length: 4000mm, weight: 3.3t, with documentation, was maintained regularly. Fjdpfx Ahsi E Trpsvsgf