Used Thermo Forming for sale (4,883)

Condition: excellent (used), Year of construction: 1992, operating hours: 41,685 h, Technical specifications: Rated power, kW: 11,3 Mold area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. drawing depth/negative, mm: 100 Number of cycles/min.-max.: 48 Consumption of air/cycle at 6 bar: 100 Nl (net-pressurized air) Bsdpfxoq A Um Rs Aa Newi Heat energy to be dissipated: with top heating ca. 10 260 KJ/h with top and bottom heating ca.: 17 715 KJ/h Special equipment: Hollow floor facility available Control cabinet: included

Year of construction: 1988, condition: excellent (used), machine/vehicle number: 3284, (min.) material thickness: 0.65 mm (max.) material thickness: 2 mm Bwsdpfshbu E Hox Aa Nei Technical Data: Width of film, max./min. 450/350 mm Forming area max. 430 x 160 mm Drawing depth max. negative/positive 6/20 mm (on request 22 mm negative) Top heater max. 10,15 kW Driving motors 3,0 kW Total connected load at 100 % duty cycle 12,7 kW Working air pressure 6 bar Air consumption (dependent on product) max. 1250 I/min Rate of water flow max. 1,0 m3/h COMPACT AND ROBUST - giving continuous high output. Easy and ergonomical operation (e.g. take- off height 1300 mm). QUICKLY CHANGEOVER - from 30° to 90° foil feed giving maximum material utilisation for both square and round lids. Heater changeover problem-free. PRECISION - The accuracy of the form table movement is guaranteed by linear guide bearings and hardened rods. The safe reliable guarantee for precision. OPTIMUM PUNCHING ACCURACY EVEN DURING MAXIMUM OUTPUT Cam controlled function sequence guarantees absolute precision with every cycle.

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 403, THERMO FORMING MACHINE TFT IMC 5030 (WITH TOOLS) Equipment / Additional information: unwinding: Roll recording: easy Max roll diameter: mm 1000 Settlement: automatically Thermoforming machine: Maximum tool dimensions: mm 520x330 Pos. Molding height max .: 15 mm Neg. Molding height max .: 120 mm Sheet width: mm 150/760 Movement Step: mm 50/330 Max HIPS film thickness: 1.8 mm Hub of the sub-table: 150 mm Clamping force: 7500 Kg Inst power top heater: 18.8 Kw Inst power under heater: 14.1 Kw Idle clock speed: per minute 40th power main drive motor: 2.2 Kw Engine power. Film feed: 0.75 Kw Air operating pressure: Kg / cm2 7 Water consumption at 12 °: 1t / 1` approx.30 Air consump. at 7 kg / cm2: 1t / cycle 125 Installed power: Kw 50 9xTool: Bodpfx Aajn D Ew Is Njwi Article no. // Tool no. // Cavities // Description / Product: 3599 // 457 // 10 // Vending machine cup capacity/capacity/contenance=223ml 593 // 460 // 8 // Coffee-to-go / thermo mug / thermo cup Filling capacity / Capacity / Contenance=300ml / 12 oz 509 // 452 // 6 // Ice cream cup: filled to the brim=140ml / Filling capacity with headspace 6mm: 120 ml 591 // 459 // 10 // Thermo mug ⌀ 81/180ml 740 // - // - // Standard cup with sealing edge ⌀ 75-120ml 3589 // 458 // 12 // Coffee-to-go / thermo mug / thermo cup: Filling capacity / Capacity / Contenance=80ml 595 // 456 // 10 // Vending cup / Gobelet pour automate: Filling capacity / Capacity / Contenance=150ml 210 // - // - // Baking case / technical part / plate or tray 8000 // 455 // - // Granule cup 180 ml / technical part with flat sealing edge

Condition: excellent (used), Year of construction: 1999, operating hours: 80,188 h, machine/vehicle number: 322, Max. film width 700-800 mm Equipment / Additional information: -GREINER STACKING / Transfer device R3 (Ref. No.: 95002.24) // M. No.: 00020 // Age: 1998 Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp The following tools were used on the machine: 8-way WZ-Ø95 and 15-way WZ-Ø73 and 15-way WZ-Ø86 Packaging was produced especially for the dairy industry. Bwsdjq Nn Hcepfx Aa Noi The cycles are 18-25 strokes - depending on the cup weight.

Condition: excellent (used), Year of construction: 2004, (LIDS PRODUCTION) Machine consists of: -1x Roll-off block Bwjdpfx Ajyh Hhyea Nsi -Thermoformer Gabler Swing -Stacking

Year of construction: 2006, condition: repair required (used), Repak thermoformer, type: RE 25, machine number: 2500020, year of manufacture: 2006, 220/240 V, 3 Ph, 50 Hz, 12 kW, 30 A, die: (12x) 85 mm x 110 m Spare parts for sale. Picture 1. Controller, electronic components, tools, vacuum pump, frame parts, etc. Includes tools of several sizes. In the condition shown in the picture. Bjdpfx Asu Hz Tdja Nowi Complete forming parts set: 4000 EUR. See Picture 2. Flender motor ZF48-M100LB4, 250 EUR (Picture 3). Busch vacuum pump Wv1000B-001 KDFC, 1200 EUR (Picture 4). Automatic 2-line label printer and spreader, complete: 1500 EUR. Picture 5. Rotary cutter for hard foil: 500 EUR (Picture 6). Outfeed conveyor: 300 EUR (Picture 8). For sale as a set for 4000 EUR, as is. Complete die set: 2500 EUR. HMI and electronic parts. Other parts.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 372, total width: 3,750 mm, total length: 10,600 mm, total height: 2,700 mm, power of vacuum pump: 5 W, heating capacity: 100 kW (135.96 HP), compressed air connection: 7 bar, Equipment: documentation/manual, 1 Used WM FC 780E roll fed thermo forming line, with KVH 83 Pre Heater, fully operational, can be seen in production. Currently used for PP & RPET tray forming, typically Food Packaging the machine is used daily and produces great quality products. Therefore it is maintained to V high standard with all WM spare parts, any remaining spares will be included with this line, Toggles, Chains, etc. Price includes Pre Heater for processing PP, Spares & Loading on to your transport. Following a new line now installed Jan 2026, this WM line is available immediately. WM 780E s/n 372 yr. 2008 Bwedpfx Aex Uym Hja Nji UNWINDER Max. reel diameter (mm) 1.200 THERMOFORMING MACHINE Max. tool size (mm) 780* x 570 Max. tool size with pneumatic clamp frame (mm) 750 x 570 Max. pos/neg depth (mm) 130/130 Max. sheet width (mm) 810 Max. sheet indexing (mm) 570 Clamping force (daN) 30.000 Upper/Lower heating, installed power (Kw) 50/50 CUTTING PRESS Max. cut dimensions (mm) 760 x 550 Platen clamping force (daN) 60.000 Upper/Lower platen stroke (mm) 150/150 steel rule heating plate (Kw) 7,8 VERTICAL STACKER Max. stacking dimensions (mm) 760 x 550 SCRAP WINDER Max. scrap roll diameter (mm) 600

Condition: new, Year of construction: 2017, functionality: fully functional, operating hours: 25 h, input voltage: 380 V, type of input current: three-phase, total height: 1,500 mm, total length: 5,200 mm, total width: 2,350 mm, overall weight: 2,500 kg, saw band length: 520 mm, saw band width: 580 mm, New machine. Bodpeunia Hsfx Aa Nswi

Condition: used, This listing is for a Thermo Scientific Heratherm IMH400-S Incubator The unit is in full working condition and is ready for immediate use Overview The Heratherm IMH400‑S is part of the Heratherm Advanced Protocol Security line of microbiological/laboratory incubators. It is designed for demanding applications where both temperature performance and safety/security of samples are important. The “Security” in its name refers to added features such as a lockable door, alarms, and a high‑temperature decontamination cycle. ----- Key Specifications ParameterValue / RangeNotes / CaveatsInternal Volume / Capacity~ 381 litres (≈ 13.5 cu ft) ThermoBid+2Some listings use “400 L” as a rounded designation +1Internal Bwodpfxoxzh H Ee Aa Nsi External Dimensions (W × D × H)~ 778 × 770 × 1,545 mm (30.6 × 30.3 × 60.8 in) Includes casters, housing, etc. +2 Temperature RangeAmbient + 5 °C to 105 °C +3This allows use both for incubation and drying protocols Temperature Stability / Uniformity±0.2 °C (at 37 °C) typical +2ThermoBid+2Some versions report ±0.1 °C stability under ideal conditions Convection / Airflow Mechanical convection; adjustable fan speed (often 10% to 100%) Ensures even temperature distribution; users can tune speed to application needs Decontamination Cycle140 °C decontamination for ~6 hours This is to reduce contaminating microorganisms in the interior without needing to remove all fittings for autoclaving shelves included; up to ~39 positions maximum Shelves are removable; spacing adjustable Power / Electrical~1380 W consumption Common variants: 230 V, 50/60 Hz Weight / Mass~ 144 kg Heavy unit, so needs stable flooring and handling during installation

Condition: good (used), Year of construction: 2013, machine/vehicle number: AKA0003767, fuel type: diesel, color: black, power: 11 kW (14.96 HP), Year of manufacture: Jun 2013 Model year: 2013 Field of application: Construction Empty weight: 857 kg Technical condition: good Visual appearance: good Damages: none Please contact Arie or Pedro for more information 5x Thermo-King 2013 Clip-on SG 3000: - ID 10757 - 14.130 hours - ID 10762 - 12.586 hours - ID 10763 - 13.047 hours - ID 10764 - 12.474 hours - ID 10767 - 13.103 hours Bwjdpfx Aowp R A Isa Nji All units have been serviced at this hours. Check our website for actual availability:

Condition: used, This listing is for a Thermo Scientific TSX40086V Ultra Low Temp Freezer. The unit is in full working condition and is ready for immediate release. This unit is supplied with temperature sensors The Thermo Scientific TSX40086V is an ultra-low temperature freezer designed to provide reliable, sustainable, and energy-efficient storage for laboratory samples. With advanced technology and robust security features, it ensures the safety and preservation of valuable materials. Bwjdexxycmepfx Aa Nji Key Features: Capacity and Dimensions: Storage Capacity: Holds up to 400 2-inch boxes, offering ample storage for a variety of sample types. Compact Design: Exterior dimensions of 37.6 × 28.3 × 78 inches, making it suitable for diverse laboratory spaces. Temperature Range and Performance: Temperature Range: Maintains ultra-low temperatures from -50°C to -86°C, ensuring optimal sample preservation. Temperature Stability: Less than 5°C variation throughout the cabinet space for consistent storage conditions. Warm-Up Time: Long warm-up time from -50°C to -80°C (approximately 5.05 hours), ensuring extended protection during power interruptions. Energy Efficiency and Sustainability: Energy Star Certified: Reduces energy consumption without compromising performance, saving on operational costs. V-Drive Technology: Adjusts to user patterns to optimize energy use and reduce HVAC demands. Eco-Friendly Construction: Manufactured in a zero-waste facility with natural refrigerants and water-blown foam insulation. Compliant with U.S. EPA SNAP and EU F-Gas regulations. Connectivity and Monitoring: DeviceLink Technology: Enables real-time monitoring of system status and sample temperature via mobile and web applications for convenience and peace of mind. Safety and Security: Advanced Security Features: Includes alarm settings, padlock-compatible doors, and optional access card entry for enhanced protection. Benefits: Sustainability: Manufactured with environmentally responsible practices and materials, making it a sustainable choice for labs aiming to reduce their carbon footprint. Energy Savings: V-Drive Technology and ENERGY STAR certification significantly reduce operational costs by optimizing energy consumption. Sample Protection: Long warm-up time and consistent temperature stability protect valuable samples even during power outages or fluctuations. Convenient Monitoring: Remote monitoring through Device Link ensures that system status and temperature can be checked anytime, anywhere. Flexible Storage: Accommodates a wide range of sample types with its large capacity and uniform temperature distribution. Applications: The Thermo Scientific TSX40086V is ideal for laboratories requiring dependable ultra-low temperature storage for critical materials, such as: Biomedical Research: Long-term storage of biological samples, DNA, RNA, and proteins. Clinical Laboratories: Preservation of vaccines, plasma, and other temperature-sensitive specimens. Pharmaceuticals: Storage of compounds, drugs, and reagents. Industrial Research: Safe storage of raw materials and chemicals.

Condition: used, This listing is for a Thermo Scientific MaxQ 8000 Orbital shaker incubator The unit is in full working condition and is ready for immediate release. The Thermo Scientific MaxQ 8000 is an orbital shaker incubator — a piece of lab equipment that combines controlled shaking and temperature control in one unit. It’s designed for biological and biochemical workflows where maintaining both a constant temperature and agitation are important, such as: - Cell culture (bacteria, yeast, insect or mammalian cells) - Fermentation - Protein expression - Hybridization and DNA work - Solubility studies and other mixing tasks How It Works - Orbital shaking: The platform inside moves in a circular (orbital) motion to mix or agitate samples evenly. - Temperature control: It incubates samples at controlled temperatures — typically from above ambient up to ~60 °C, and in refrigerated models also below ambient — so you can grow cultures or perform temperature-sensitive reactions. - Stackability: Units can be stacked 2–3 high to multiply capacity without using more floor space. Key Features - Temperature range: Ambient +10 °C to ~60 °C (or lower if refrigerated version) - Speed range: ~25–400 rpm for shaking with accurate control - HEPA-filtered chamber: Promotes clean air and reduces cross-contamination risk inside the incubator for better culture conditions. - Slide-out platform: Makes loading and adjusting flasks easy. - Microprocessor controls: Digital display and alarms for monitoring temperature, speed, and time. - Bjdpfx Asylapnsa Nowi Typical Applications - Growing microbial or cell cultures - Protein expression studies - Hybridization reactions - Solubility assays - General mixing where precise temperature control is needed alongside agitation.

Condition: excellent (used), Thermo Scientific Thermo Scientific Forced-Air Drying Oven UT 6200 F with external temperature control unit Single STW150 Temperature Control System 85°C Thermo Scientific Forced-Air Drying Oven UT 6200 F with external temperature control unit Complete laboratory temperature control and drying system Description – Function & Application For sale is a professional temperature control and drying system comprising: - Thermo Scientific / Heraeus Forced-Air Drying Oven UT 6200 F - Single Water Temperature Control Unit STW 150/1-3-10-K5 The forced-air drying oven ensures uniform temperature distribution inside the chamber and is ideal for drying, heating, and temperature-controlling samples, components, or materials. Heating is provided via the external water temperature control unit (external heater), resulting in highly stable, indirect, and gentle temperature management—without local overheating and with homogeneous heat distribution. Typical areas of use: - Laboratory & research - Industry & production - Materials testing / component drying - Tempering, heating, drying at constant temperatures Bwjdpfxsymn Egj Aa Noi Robust laboratory and industrial quality—reliable and durable. Device 1 – Forced-Air Drying Oven: Manufacturer: Thermo Scientific / Heraeus Model: UT 6200 F Technical Data: - Max. temperature: 85°C - Operating voltage: 230 V - Frequency: 50 / 60 Hz - Power consumption: 0.6 A - Power: 0.14 kW - Protection class: IP20 Dimensions & Weight (approx.): - External dimensions: 895 × 816 × 715 mm - Inner chamber: 554 × 644 × 503 mm - Volume: approx. 180 liters - Weight: approx. 100 kg Device 2 – Water Temperature Control Unit: Manufacturer: Single Temperiertechnik GmbH Model: STW 150/1-3-10-K5 Technical Data: - Heat transfer medium: water - Connection: 400 V / 3~ / PE / 50 Hz - Power consumption: 6.9 A - Heating capacity: 9 kW - Apparent power: 4.7 kVA - Max. temperature: 150°C Dimensions & Weight (approx.): - Dimensions: 30 × 75 × 60 cm - Weight: 55 kg Total: - Complete temperature control and drying system - Joint operation possible (external heating / external heater) - Total weight: approx. 155 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) (Specifications are subject to change and error!) For further questions, we are happy to assist you by phone.

Condition: used, This listing is for the Thermo Fisher Invitrogen E-Gel TM Power Snap Electrophoresis Device The unit is in full working condition and is ready for immediate use Bsdpfx Aoxv Az Toa Nswi The E-Gel™ Power Snap Electrophoresis Device is a compact, all-in-one benchtop system that streamlines both DNA separation and gel visualization. Designed for fast, safe, and convenient electrophoresis, this system integrates the power supply, blue-light transilluminator, and amber filter in one unit—making it ideal for a wide range of DNA analysis workflows Key Features Streamlined Electrophoresis & Imaging: All-in-one system integrates gel running and image capture. Fast Separation: Run DNA samples in as little as 10 minutes using dry, precast E-Gel™ agarose gels. Real-Time Visualization: View and capture DNA samples as they separate with integrated blue-light and amber filter technology. Instant Image Capture: The docked E-Gel™ Power Snap Camera allows high-resolution gel imaging without the need for external power or desktop connections. Benchtop Friendly: Small, fast, and powerful with a compact footprint for efficient and convenient use. Pre-Programmed Protocols: Built-in methods for all compatible E-Gel™ agarose gel types for a plug-and-play experience. Safe and Simple: Blue-light imaging avoids the hazards of UV light.

Condition: used, This listing is for the Thermo Scientific Vanquish UHPLC Sytem The unit is in full working condition and is ready for immediate use Overview: Thermo Scientific Vanquish UHPLC Systems 1. Autosampler Purpose: Introduces the sample into the mobile phase stream automatically. Picks up sample from vials, plates, or tubes Injects with high precision (often nL to µL volume range 2.Pump Module Purpose: Delivers the mobile phase (solvent) through the system at high pressure. Binary pump: Mixes two solvents at high pressure. Ideal for fast gradients. Quaternary pump: Mixes up to four solvents at low pressure. More flexible, but slower gradients. Controls flow rate (e.g., 0.001–5.000 mL/min) Enables gradient elution (changing solvent composition over time 3.Detector Module (x2) Purpose: Detects and measures analytes as they elute from the column. Bwsdpfx Aoxhfkzja Nei Diode Array Detector (DAD/UV-Vis) – most common; detects UV-absorbing compounds Fluorescence Detector – for fluorescent compounds Charged Aerosol Detector (CAD) – universal detection for non-UV compounds Refractive Index Detector – for sugars, polymers MS (Mass Spectrometer) – advanced, highly sensitive detection Thermo Fisher’s Vanquish platform includes several variants tailored to different analytical needs—from routine HPLC to ultra-high-throughput and low-flow LC–MS workflows: Vanquish Flex UHPLC: Offers flexible HPLC/UHPLC method development and operates up to 1000 bar. It supports binary, quaternary, and dual pumps, plus intelligent tools like solvent monitoring and optional touchscreen interface. Vanquish Horizon UHPLC: Built for maximum performance, offering ultra-high pressure (up to 1500 bar), ultra-low gradient delay volume, biocompatible flow paths, and exceptional retention time stability and detector sensitivity. Vanquish Neo UHPLC: Designed for next-gen low-flow LC‑MS workflows (nano‑ to micro‑flow), delivering high‑sensitivity, high‑robustness separations. Vanquish Analytical Purification LC: Specialized for precise fractionation—high pressure (700–1500 bar), customizable flow (up to 10 mL/min), integrated fraction collector, multimodal detection, and advanced automation. Key Features Across the Platform Modular Design: Choose components (pumps, samplers, detectors, thermostatting units) to configure a tailored system. Most models offer biocompatible flow paths and Viper fingertight fittings for low dead‑volume, tool‑free setup. Temperature Control: High-performance column compartments with active/passive heating, pre‑heating, and post‑column cooling to manage frictional heating and improve reproducibility. Detection Options: Available detectors include Diode Array (with LightPipe optics for superb sensitivity), Charged Aerosol Detector (CAD) for near‑universal detection, fluorescence, multi‑wavelength, refractive index, and mass spectrometry detection. Software Integration: Fully compatible with Chromeleon CDS (with SII for streamlined MS integration), plus Xcalibur and TraceFinder for LC‑MS workflows. MS Integration: Vanquish systems interface seamlessly with Thermo MS platforms—Triple Quadrupole and Orbitrap—for sensitive, accurate mass analysis. Operational ROI: Thermo highlights reduced unplanned repairs, improved productivity, and net-zero ambitions through renewable-powered manufacturing.

Condition: excellent (used), Thermo Scientific Thermo Scientific Forced-Air Drying Oven UT 6200 F with external temperature control unit Single STW150 Temperature Control System 85°C Thermo Scientific Forced-Air Drying Oven UT 6200 F with external temperature control unit Complete laboratory temperature control and drying system Description – Function & Application For sale is a professional temperature control and drying system comprising: - Thermo Scientific / Heraeus Forced-Air Drying Oven UT 6200 F - Single Water Temperature Control Unit STW 150/1-3-10-K5 The forced-air drying oven ensures uniform temperature distribution inside the chamber and is ideal for drying, heating, and temperature-controlling samples, components, or materials. Heating is provided via the external water temperature control unit (external heater), resulting in highly stable, indirect, and gentle temperature management—without local overheating and with homogeneous heat distribution. Typical areas of use: - Laboratory & research - Industry & production - Materials testing / component drying - Tempering, heating, drying at constant temperatures Robust laboratory and industrial quality—reliable and durable. Device 1 – Forced-Air Drying Oven: Manufacturer: Thermo Scientific / Heraeus Model: UT 6200 F Technical Data: Bodoykab Iepfx Aa Njwi - Max. temperature: 85°C - Operating voltage: 230 V - Frequency: 50 / 60 Hz - Power consumption: 0.6 A - Power: 0.14 kW - Protection class: IP20 Dimensions & Weight (approx.): - External dimensions: 895 × 816 × 715 mm - Inner chamber: 554 × 644 × 503 mm - Volume: approx. 180 liters - Weight: approx. 100 kg Device 2 – Water Temperature Control Unit: Manufacturer: Single Temperiertechnik GmbH Model: STW 150/1-3-10-K5 Technical Data: - Heat transfer medium: water - Connection: 400 V / 3~ / PE / 50 Hz - Power consumption: 6.9 A - Heating capacity: 9 kW - Apparent power: 4.7 kVA - Max. temperature: 150°C Dimensions & Weight (approx.): - Dimensions: 30 × 75 × 60 cm - Weight: 55 kg Total: - Complete temperature control and drying system - Joint operation possible (external heating / external heater) - Total weight: approx. 155 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) (Specifications are subject to change and error!) For further questions, we are happy to assist you by phone.

Condition: new, machine/vehicle number: 357, Thermo Scientific Wellwash microplate washer Description Reliably wash 96-well plates with the Thermo Scientific Wellwash, an easy-to-use and reliable microplate washer for routine ELISA applications. The washer is equipped with a graphical user interface, different language versions and a USB port for optimal ease of use and outstanding convenience. Features: Large, clear color display and keypad ensure ease of use User interface is logical and intuitive and enables fast protocol programming User-friendly software requires minimal training and ensures a quick start Non-pressurized bottles are safe to use Liquid level sensors in wash and waste bottles ensure safe cycles Automatic pre-rinse function ensures safe performance Aerosol cover prevents aerosols of infectious material from escaping Plate sensor detects whether a plate is present or not Wellwash effectively removes excess liquid from wells Low residual volumes ensure optimal washing performance and reliable assay results Financing through our bank is also possible. komplett-konzept.leasingo.de Bwsdpfxjtt R Sys Aa Nsi Further articles in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: new, Thermo Scientific Wellwash Microplate Washer Description Reliably wash 96-well plates with the Thermo Scientific Wellwash, a user-friendly and reliable microplate washer for routine ELISA applications. The washer features a graphical user interface, multiple language options, and a USB port for optimal ease of use and convenience. Features: Large, clear color display and keypad ensure ease of use. The user interface is logically and intuitively structured, allowing for rapid protocol programming. User-friendly software requires minimal training and ensures a quick start. Pressure-free bottles are safe to use. Liquid level sensors in the wash and waste bottles ensure safe runs. Automatic pre-rinse function ensures safe performance. Aerosol cover prevents the escape of aerosols of infectious material. Plate sensor detects whether a plate is present. Wellwash effectively removes excess liquid from wells. Low residual volumes ensure optimal wash performance and reliable assay results. Financing through our bank is also possible. komplett-konzept.leasingo.de More items in other sizes—new and used—can be found in our shop! International shipping costs upon request! Bwjdpfx Aaetzb D Do Nsi

Condition: used, Year of construction: 2011, Overview  This shrink packer was manufactured in 2011 by the Italian company Giemme Thermo. The Giemme SLH is a film-only shrink wrapping machine used for secondary packaging of multipack PET bottles (1.5 L format). The machine is equipped with two parallel lanes, allowing high throughput and flexibility in packaging configurations. The machine is no longer in production but still installed and will be available from December 2025. A set of spare parts is included, and dismantling and truck loading can be quoted separately. Technical data  Capacity: 20 cycles/min Formats: 2 × (3 × 2) × 1.5 L 6 × (2 × 1) × 1.5 L Application: Cider, lemonade, soda, carbonated beverages Power Supply: 40 kW Dimensions (L × W × H): 650 × 170 × 250 cm Configuration: Dual-lane infeed for higher flexibility Film Type: Shrink film only (no tray) Condition: Very good; still installed and connected Availability: 20 December 2025 Bwsdpfx Aaoxrc Hho Nji

Year of construction: 2013, condition: excellent (used), Vacuum THERMO oven, max temperature 200°C Bsdpfjxcb H Usx Aa Nowi

Condition: used, This listing is for the Thermo Scientific™ F1-ClipTip™ 12-Channel Pipette The unit is in full working condition and is ready for immediate use The Thermo Scientific™ F1-ClipTip™ 12-Channel Pipette is a high-precision manual pipette designed for efficient and reproducible liquid handling in laboratory settings. It features Thermo Fisher's innovative ClipTip™ technology, ensuring secure tip attachment and ejection without the need for forceful insertion or removal. Key Features Number of Channels: 12 Volume (Metric): 30 to 850 μL Increments: 1 μL Compatible Tips: ClipTip 1000 Color: Blue Model: Bluetooth* (see description section below for more details) Programmability: Yes Type: 96 format (designed for 96-well plate applications) Volume Range: 30 to 850 μL (with the ClipTip 1000) Tip Attachment: Tips lock securely in place with a light touch and remain sealed until intentionally ejected Ergonomic Design: Lightweight handle with a 120° adjustable finger rest for both right- and left-handed users Bsdpfxjxv Di Ee Aa Newi Volume Adjustment: Secure volume lock to prevent drift during operation Warranty: Industry-leading lifetime warranty with convenient online registration Certifications: CE-marked in accordance with IVD Directive in Europe; manufactured according to ISO 9001, ISO 14001, and ISO 13485 standards Applications Ideal for applications requiring high precision and reproducibility, such as: Genomics and proteomics Microplate assays Cell culture and drug discovery High-throughput screening

Condition: used, This listing is for a Thermo Fisher Scientific A500PV Laboratory Refrigerator Bjdpoxv Dn Isfx Aa Njwi The unit is in full working condition and is ready for immediate release

Condition: used, This listing is for the Thermo Scientific Heratherm IMH180 Incubator The unit is in full working condition and is ready for immediate use The Thermo Scientific Heratherm IMH180 is a high-performance, reliable incubator tailored for demanding laboratory tasks: Precision: Excellent temperature control and uniformity. Flexibility: Adjustable airflow, generous interior volume, and timer options. Convenience: Viewing window, internal socket, and connectivity via RS‑232. Cleanability & Space Efficiency: Stainless steel interior and stackable design. Advanced Safety (Security Model): Door alarms, lockable access, and high-temperature decontamination. Perfect for microbiology, cell culture, pharmaceutical testing, and drying applications where sample integrity and process control are critical. Design & Functionality Dual Convection Technology: Offers adjustable fan speed from 0 % (natural convection) to 100 %, enabling tailored air circulation depending on the sample type or protocol Temperature Range: Operates from 5 °C above ambient up to 105 °C, making it suitable even for drying tasks Temperature Uniformity & Stability: With fan off: ±0.6 °C spatial uniformity With fan at full speed: ±0.2 °C to ±0.4 °C uniformity (at 37 °C) Temporal stability: ±0.1 °C (at 37 °C) Capacity & Build Interior Volume: 178 L (about 6.3 cubic feet) Shelving: Comes with 2 stainless-steel shelves (each supporting up to ~25 kg) and can accommodate up to 19 shelves for flexible arrangement Construction: Corrosion-resistant stainless steel interior (AISI 304) with easy-to-clean rounded corn Controls & Usability Controller: Microprocessor-based with a clear vacuum fluorescent display for easy setting of temperature, timers, and monitoring Timer Functionality: Programmable daily, weekly, or real-time ON/OFF cycles for scheduling experiments Extras: Internal power socket (120 V models) for operating devices like shakers or stirrers inside the chamber Internal glass viewing door and optional internal lighting for observing samples without opening the chamber RS‑232 interface for data logging and connectivity Stackable design without tools—efficient laboratory space use Safety & Maintenance Alarms: Automatic over- and under-temperature alert system protects sample integrity Security Model (IMH180‑S): Adds a lockable outer door and audible alarms for door‑open conditions Includes a certified 140 °C decontamination cycle (about six hours) to sterilize the chamber without needing an autoclave—ideal for high‑sterility environments Dimensions & Electrical Specs Feature Specification Exterior (W × D × H) 64 × 74 × 92 cm (25.2 × 29.1 × 36.2 in) Interior (W × D × H) ~46 × 54 × 70 cm (18.3 × 21.4 × 27.9 in) Bwedpfxexhd Ixe Aa Nei Weight ~70 kg (154 lb) Electrical (120 V) 1,020–1,390 W; 8.5 A at 60 Hz Materials Stainless steel (interior), durable housin

Condition: used, This listing is for the Thermo Scientific Precision CIR19 Heated Circulating Bath The unit is in full working condition and is ready for immediate use The Precision CIR‑19 is a robust and reliable lab tool tailored for high-precision temperature-sensitive workflows. Its strengths include excellent uniformity, precise digital control, safe operation features, and ease of maintenance. Whether you're incubating samples or performing delicate assays, it’s built to deliver consistent, reproducible results Overview & Applications The Precision CIR‑19 is a high-performance 19 L (5 gal) circulating water bath engineered for applications demanding strict temperature uniformity and control—think enzyme reactions, serological assays, or any sensitive method where thermal consistency matters. Key Features Perimeter-directed water flow for superior temperature uniformity. Coil-free internal design, making cleaning and maintenance a breeze. Microprocessor-based digital control, displayed via a monochrome LCD. Bedpfx Aexhfpwoa Nswi Auto-on/auto-off timers and audible alarms, enhancing scheduling and safety. Low-fluid (dry-run) protection, guarding against overheating or damage. Hinged lid with extended height, ideal for accommodating taller labware. Supplied with a stainless steel gable cover, diffuser tray, and the quirky but useful rubber duck.

Condition: used, This listing is for the Thermo Scientific Finnpipette. 0.5ml The unit is in full working condition and is ready for immediate use Bwedpfxjxhf Nqe Aa Nei The Intuitive menu and simple button layout, allow you to choose all the pipetting functions you need quickly and easily. The large display is easy to read and shows the full names of all functions. Easily accessible menu offers 10 different pipetting functions and 9 pipetting speeds to handle a wide variety of pipetting applications. Select common functions such as forward, reverse, diluting, and stepper pipetting or advanced functions like mixing, sequential stepping, or program up to 9 of your own functions. Solid-shaped and perfectly balanced handle fits comfortably and securely in your hand, and together with the finger rest, it keeps pipetting stress and exertion to a minimum. Ergonomically designed to let your index finger control dispensing with just a soft press of the button. Adjust the finger rest a full 120° of movement to fit your hand exactly— whether you’re left- or right-handed. Very low tip ejection force minimizes strain on your thumb.