Used Threaded Bolt for sale (4,053)

Condition: excellent (used), Thread plug gauges different sizes M 80 x6 6 H. 476,00 Euro Itodpsipxynefx Addjb M 80 x 6 7 H. 476,00 Euro M 64 6 H Left 340,00 Euro M 62 6 H Good& scrap 320,00 Euro M 55. x 3 6 H 240,00 Euro M 55 x 1.5 6 H 240.00 Euro M 48 x 2 6 H 240,00 Euro are also sold individually

Condition: excellent (used), Year of construction: 2015, Roll pressure infinitely adjustable from 240 kN feeds - fine adjustment 0,5-45 mm/min turning speeds 0-80 U/min Swivel angle of the roller heads 11 ° Diameter of the roller spindles 69,85 mm Stroke - Roller screw slide 0-150 mm min. dist. - roller screws 138 mm max. dist. - roller screws 285 mm min. diameter - Rolling tools 230 mm max. diameter - Rolling tools 135 mm min. dia. 2 mm max. diameter 55 mm thread length at plunge operation 200 mm thread length at continiuous operation 2000 mm maximum thread pitch 4 mm Itjdpsxukrqjfx Addob total power requirement 14 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 2,0 x 2,5 x 1,9 m Rolling time continuously adjustable from: 0.1s Pause time continuously adjustable from: 0.1s Rolling spindle length: 200mm Machine bed height: 810mm Rolling spindle height above machine bed: 200 mm Height of support bearings: 115 mm Largest pitch for serrated teeth: 2.5 mm (up to 70 kg/mm2 Strength of the material)

Condition: excellent (used), Tapping attachment Efem No.1 Itedotqlq Eepfx Addob for internal thread Mounting MK 2 Tapping head Adjustable slip clutch Thread M3 - M10 Mechanical condition very good optically there are traces of storage

Condition: excellent (used), Tap for pipe thread Make May Type : R 3 3/4 inch Total length 185 mm Ijdpfsfhdwqox Addetb

Condition: used, Taps for pipe thread Before and finished Schneider Iedpfsdk Rdvox Addetb R 2 3/4 inch

Condition: used, Diameter 48 mm Bilz thread adapter Diameter 63 mm Variolock connection Length 160 mm Iodpfxob Tyqpe Addetb Total length 180 mm 2 pieces available

Condition: as good as new (ex-display), 1 3/4 inch - 5 1 3/8 inch - 5 1 1/8 inch - 7 7/8 - 9 5/8 - 11 1/2 in. - 13 Itsdpjdwbk Rofx Addsb 38 inch - 16 5/16 inch - 18 1/4 inch - 20 Individual approval is possible

Condition: used, Bench Drilling and Tapping Machine FLOTT Type TBZ 15 GL Serial No. 32177027 Year of Manufacture: 1986 Drilling capacity: 15 mm Spindle taper: MK2 Throat depth: 195 mm Quill travel: 80 mm Table size: 275 x 200 mm Itjdjdzp S Nopfx Addob Column diameter: 70 mm Spindle speed: 80 - 4500 rpm, 18 steps Motor power: 0.55 + 0.75 kW Power supply: 380 volts, 50 Hz - 6 belt steps from motor and 2 belt steps to the drill spindle, 2 motor speeds - Drill head height adjustment via hand crank with rack on the column - 3 guide bushings 0.7mm + 0.8mm and 28G included - 1 keyless drill chuck Ø 1.5 to 13 mm - Original metal pedestal Space requirement (L x W x H): 700 x 350 x 1850 mm Weight: 165 kg In good condition

Condition: new, Year of construction: 2024, thread dia. bis M 16 mm turning speeds 0 - 600 U/min thread M5 - M16 working area 2050 Rmax. working area 500 Rmin. Itodpfxsu Ag Ras Addeb table surface area 900 mm engine output 3,0 kW weight ca. 250 kg

Condition: new, thread dia. M6 - M36 mm turning speeds 156 U/min radius 1200 mm angle adjustable from - to 0 - 90 Grad weight of the machine ca. 0,4 t dimensions of the machine ca. 1,4 x 0,1 x 0,7 m Electric tapping machine / 4450136SET Fast and precise thread cutting with freely positionable swivel arm Iedpfxeg N Nl Io Addotb - The machine head can be swiveled from 0 to 90 degrees - Quick change chuck with slip clutch for safe thread cutting without Risk of breakage - Right-left rotation can be selected on the machine head - Setting of thread size, speed, pitch and cutting depth via Touchscreen on the swivel arm - Manual mode: the stops after the set cutting depth is reached Spindle automatic, forward and reverse must be activated manually. - Automatic mode: changes after the set cutting depth is reached the machine automatically from the forward to the return - ideal for that Thread cutting of several blind holes Incl. 1 each GT12 M6, M8, M10, M12, M14, M16, M18, M20, M22-24, M27, M30, M33, M36 Substructure 900 x 600 x 875 mm

Condition: new, thread dia. M6 - M24 mm turning speeds 200 U/min radius 1200 mm angle adjustable from - to 0 - 90 Grad weight of the machine ca. 0,4 t dimensions of the machine ca. 1,4 x 0,1 x 0,7 m Electric tapping machine / 4450124SET Fast and precise thread cutting with freely positionable swivel arm - The machine head can be swiveled from 0 to 90 degrees - Quick change chuck with slip clutch for safe thread cutting without Risk of breakage - Right-left rotation can be selected on the machine head - Setting the parameters via touch display on the swivel arm - Both manual and automatic switching from forward to backward to Itedpsg N Nl Dsfx Addeb reaching the entered Incl. 1 each GT24 M6, M8, M10, M12, M14, M16, M18, M20, M22-24 tapping chuck Substructure 900 x 600 x 875 mm

Condition: used, Year of construction: 2017, workpiece dia. . mm material: rust free/heat resistant steel . Iodpfx Adoxzu Agedetb welding process: 15-20 bolts /min at . mm weight of the machine ca. 120 kg

Condition: new, thread dia. M5 - M24 turning speeds 70 - 200 U/min working area max. 1200 R angle adjustable from - to 0 - 90 Grad voltage 230 V engine output 1200 W weight 65,0 kg - with micro spray system for constant cooling & minimal Cooling lubricant consumption - Includes blow-out device to remove chips, ensuring optimal visibility on the borehole - Includes quick-change chuck for using taps for Through and blind holes - Swivel motor unit for thread cutting at any desired angle between 0° and 90° - Higher accuracy compared to manual thread cutting, thread is guaranteed right angle (90°) - high productivity, significant time savings compared to manual Threading - Quick-change chuck with integrated slip clutch prevents breaking of the tap Itedpfexaaybjx Addjb - Includes large radius swivel arm for easy positioning tap on the workpiece - For thread cutting in steel, stainless steel, aluminum and non-ferrous metals scope of delivery - Operation via touchscreen - Digital drilling depth display - Micro spray system - Blow-out device - Quick change mount - Quick-change chuck according to DIN - Electric motor - 90° angle adjustment - Mounting flange Special accessories included: - BERNARDO base frame 900 x 600 mm (Art. No.: Mounts: DIN 376: M5-6 / M8 / M10 / M12 / M14 / M16 / M18 / M20 / M22-24

Condition: new, thread dia. 12 M max. turning speeds 400 U/min thread M 3 - M 12 M working area 1600 R max. working range 500 Rmin. weight 16 kg Description: The AT II models have a radius of up to 1600 mm and thanks to their construction a flexible workspace. For professional use. Easy to mount on a worktop. Furnishing: - Tool holder with 6 cutter holders Itsdpfx Adsxabbmedsb • M3 20111812 DIN 371 19 • M4 20111814 DIN 371 19 • M6 20111816 DIN 371 19 • M8 20111817 DIN 371 19 • M10 20111818 DIN 376 19 • M12 20111820 DIN 376 19 - with slip clutch - Control valve with lubrication - Including compressed air motor / maintenance unit - Adapter connection size 1

Condition: new, thread dia. bis M 24 turning speeds U/min thread M5 - M24 working area 2050 Rmax. working range 500 Rmin. Iedexab Iajpfx Addjtb work height max. 900 mm table surface area 700 x 900 mm oil volume 100 l engine output 3,0 kW weight - pallet system ca. 300 kg Furnishing: - electro-hydraulic thread cutting machine - large working area (radius max. 2050 mm) * including table clamping disk * Swivel movement is smooth thanks to built-in gas pressure dampers - mobile machine base * Oil tank + hydraulic unit integrated in the base frame * hydraulic pressure gauge - continuous speed adjustment - vertical/horizontal thread cutting possible - Lateral sorting of the quick-change inserts possible - Connection cable with 16A plug Special accessories included / quick-change inserts: M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M22

Condition: new, thread dia. 20 M turning speeds 400 U/min thread M 4 - M 20 M working area 1900 Rmax. working range 200 Rmin. Description: The AT models have a radius of up to 1900 mm and their construction a flexible workspace. For professional use. Easy to mount on a worktop. Furnishing: - including 7 thread cutting inserts • M3 20111812 DIN 371 19 • M6 20111823 DIN 371 31 • M8 20111824 DIN 371 31 • M10 20111826 DIN 371 31 • M12 20111827 DIN 376 31 Isdpoxaaa Isfx Addjtb • M16 20111829 DIN 376 31 • M20 20111831 DIN 376 31 - Control valve with lubrication - Including air motor - Adapter connection size 2 - The cutting head can be pivoted vertically downwards by 90 ° - The cutting head is pivoted and rotatable through 360 ° - Operating instructions in German * without the perforated table as per Fig.

Condition: new, thread dia. bis M 36 turning speeds 0-100 U/min thread M5 - M36 working area 2050 Rmax. working range 500 Rmin. work height max. 900 mm table surface area 700 x 900 mm oil volume 100 l engine output 5,5 kW weight - pallet system ca. 500 kg Furnishing: - electro-hydraulic thread cutting machine - large working area (radius max. 2050 mm) * including table clamping disk * Swivel movement is smooth thanks to built-in gas pressure dampers Ijdpfexab Igox Addjtb - mobile machine base * Oil tank + hydraulic unit integrated in the base frame * hydraulic pressure gauge - continuous speed adjustment - vertical/horizontal thread cutting possible - Lateral sorting of the quick-change inserts possible - Connection cable with 16A plug Special accessories included / quick-change inserts: M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M 22 M27 / M30 / M33 / M36

Condition: used, Year of construction: 2020, thread dia. bis M 24 turning speeds U/min thread M5 - M24 working area 2050 Rmax. working range 500 Rmin. work height max. 900 mm table surface area 700 x 900 mm oil volume 100 l engine output 3,0 kW weight - pallet system ca. 300 kg New price approx. 4.500 euros rarely used (!!) Special price on request Equipment: - electro-hydraulic thread cutting machine - large working area (radius max. 2050 mm) * including table clamping disc * smooth swivel movement thanks to built-in gas pressure dampers, among other things - mobile machine base frame * oil tank + hydraulic unit integrated in the base frame * hydraulic pressure gauge Itjdexachnjpfx Addeb - stepless speed adjustment - vertical / horizontal thread cutting possible - lateral sorting of the quick-change inserts possible - connection cable with 16A plug

Condition: new, thread dia. M6 - M36 turning speeds 30 - 150 U/min working area max. 1200 R angle adjustable from - to 0 - 90 Grad voltage 230 V engine output 1200 W weight 65,0 kg - Includes quick-change chuck - for use with taps - for through holes and blind holes - Swivel motor unit for thread cutting - at any desired angle between 0° and 90° - Higher accuracy compared to manual thread cutting - Thread is guaranteed to be right-angled (90°) - High productivity - significant time savings compared to manual thread cutting - Quick-change chuck with integrated slip clutch - Includes swivel arm with large radius - for easy positioning of the tap on the workpiece - Highly economical due to low investment and maintenance costs - For thread cutting in steel, stainless steel, aluminum and non-ferrous metals Scope of delivery - Operation via touchscreen - Digital drilling depth display - Quick-change holder according to DIN - Quick-change chuck - Electric motor - 90° angle adjustment - Mounting flange Special accessories included: - BERNARDO base frame with 2 drawers * milled support surface 900 x 600 mm * including 3 T-slots (16 mm) * large storage space and 2 drawers for storing tools * 4x swivel castors including parking brake - Mounts according to DIN 376: * M5-6 / M8 / M10 / M12 / M14 / M16 / M18 / M20 / M22-24 / M27 / M30 / M33 / M36 Iedpfx Ajxab Eljddotb

Condition: good (used), Indexing bolts, locking bolts, spring plungers -comes from a grandstand system Isdjcd Em Aspfx Addstb -Execution: difficult -Bolt diameter: 20 mm -Bolt stroke: 38 mm -41 pieces: left one available -41 pieces: right ones available -Price: per piece -Weight: 2 kg/piece

Condition: good (used), Thread cutting chuck, thread chuck, tap chuck, thread cutting apparatus -with slip clutch -Integrated reversing gearbox with quick return -Thread cutting sizes: M5-M20 -Recording: MK4 -Dimensions: 380/95 mm Iedpfsb A Rxcex Addotb -Weight: 4.1 kg

Condition: used, Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Tapping chuck: MK3 mount -Cutting capacity: M3 -M12 -Bore: Ø 10 mm -Dimensions: Ø 58 x 213 mm -Weight: 1.9 kg Itedpsphup Uefx Addob

Condition: used, Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: WMW ABW, tapping chuck holder MK3 -Type: GB3 -Bore: Ø 24 mm Iedpfx Asrvlfcoddjtb -Dimensions: Ø 80 x 264 mm -Weight: 3.7 kg

Condition: good (used), Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: WMW, tapping chuck holder MK2 Iodpfx Adorv Au Rsdetb -Type: A2 MK2 -Bore: Ø 12 mm -Dimensions: Ø 70 x 267 mm -Weight: 3.3 kg

Condition: used, Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: WMW, tapping chuck holder MK2 -Type: A2 MK2 -Bore: Ø 13 mm -Dimensions: Ø 70 x 267 mm Iedperv Avvefx Addstb -Weight: 3.3 kg