Used Threaded Bolt for sale (3,912)

Condition: used, empty load weight: 6,990 kg, maximum load weight: 31,010 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 01/2016, next inspection (TÜV): 03/2024, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,830 mm, loading space volume: 92 m³, suspension: air, tire size: 385/65 R22,5, color: blue, Year of construction: 2016, Equipment: ABS, Unladen weight: 6990kg, Permissible total weight: 38000kg, Load securing with certificate, Load space (L W H): 13.620 mm x 2.480 mm x 2.830 mmTire size: 385/65 R22.5, Certificate DIN EN 12642 (code XL), Load space volume: 92 m³, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Underrun protection, Lifting axle front and rear, Pallet box, Electronic braking system EBS, Fire extinguisher holder, Tool box, Bolted chassis, Sliding roof, Connection plug 1x15 and 2x7 pins, Anti-spray, Brake discs Axle 1 remaining 38mm Pads wear 70%Brake discs Axle 2 remaining 36mm Brake pads wear 10% Brake discs Axle 3 remaining 40mm Brake pads wear 20%Mines:03/2024 -, You will find an overview of all our available vehicles on our website. Need financing? We offer individual financing, as well as full-service or a teleservice we will be happy to advise you personally. Iaedpfx Ajv Nb R Reddjl

Condition: as good as new (ex-display), Year of construction: 2023, pressure 80.0 t stroke 250 mm table surface area 1040 x 260 mm column travel between the guideways 1040 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 5.5 kW weight of the machine ca. 835 kg. dimensions of the machine ca. 1810 x 700 x 2100 mm Exhibition machine from 2023 with only approx. 2x operating hours Isdpfx Aow U U Svjddjal condition like NEW special price on request Equipment: - robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts etc., but also for pressing in and pressing out bolts, bearings, bushes etc. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Including round steel chain and 2x locking bolts * Piston rod with metric mount - 1x set of V-block prism support - Pressure gauge for pressure display - Simple manual operation with : * 1x feed speed * 1x working speed * 1x retraction speed - piston can be stopped in any position - Hydraulic tank permanently mounted on the side - operating instructions

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical specifications: Fully equipped in standard version with: - Robust, torsion-free steel frame, welded and bolted construction - Lamella pressure beam TOP with 6 elements, lamella pressure beam SIDE with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly compressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface, height 95 mm, on lower vertical pressure beam - Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance ball nuts with grease reservoir - The pressing process is carried out electromotorically, via 2 independent worm gear motors (2 x 0.75 kW) - Pressing force of the pressure beams is infinitely variable and electronically controlled by 2 potentiometers, regulated via frequency inverter, ensuring absolutely wear-free force control - Pressing force for horizontal pressure beam: min. 500 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing force for vertical pressure beam: min. 300 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing and adjustment speed of the beams with fine positioning, using 3-stage selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcasses at 45° - Simplest operation via 6 separate push buttons, 8 movement cycles selectable via control panel - Freely adjustable press time preselection 0-30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressure beams - Re-pressing function to increase or decrease the pressing force during the pressing process Iasdew Nafkspfx Addel - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm Including surcharge for rapid traverse speed, for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, the sensors can be deactivated for pressing special components Including a set of machine feet for 500 mm working height Location: Flörsheim Availability: Short-term

Condition: ready for operation (used), Year of construction: 2010, x-travel 10000 mm y-travel 1500 mm z-travel 1000 mm passage 1300 mm passage width 1500 mm control Siemens Sinumerik 840 D turning speeds 2 Stufen: 6000 U/min Number of working hours 54821 h tool taper SK 50 Boring power 120 mm thread capacity M 55 toolpiece magazine: chain magazine 30 Stück rapid traverse X-axis 36000 m/min rapid motion Y-axis 30000 m/min rapid traverse Z-axis 30000 m/min total power requirement 36 kW dimensions of the machine ca. 12 x 11 m Gantry-style milling machine with movable portal bridge and stationary clamping table. Iajdsx S Rx Ispfx Addel Features: • Clamping table designed with transverse clamping beams spaced 750 mm ndard panel panels are not included. Panel panels must be purchased separately if required. • Hydraulic clamping device with clamping bridges for axis machining, includinghydraulic system • Angle drilling and milling head, n = 4000 rpm SK50 • High accuracy and stability thanks to Hirth gearing • Automatic tool change in the angle head • RWP20.50-M touch probe • Pendulum operation • Safety fence with light curtains, Sick brand • Clamping table with 750 mm transverse clamping beams • 30-position tool chain magazine on the gantry frame • Machine cooling system • Integrated water-to-air heat exchanger in the control cabinet • Unisign remote diagnostics for Siemens Sinumerik 840 D • Makrolon curtains on both sides of the gantry bridge motorized height adjustment • Partition wall with viewing window • Chip conveyor with hinged belt design • Mounting and alignment elements • Documentation Accessories: 1 spare SK50 angle drill and milling head 1 spare Hexagon RWP 20.50-M touch probe 1 2500 x 1200 mm T-slot clamping frame, which can be installed on the machineinstead of the hydraulic device. Various spare parts

Year of construction: 1997, condition: ready for operation (used), overall weight: 10,500 kg, total height: 2,000 mm, This Grecon Dimter FDL-F 205/600/500 was manufactured in 1997. It is designed for woodworking applications, offering robust performance and reliability. Ideal for handling a variety of wood processing tasks efficiently. Contact us for more information about this machine. Additional equipment • Press (Face Press): Pressing Pressure 6 - 12 t and power consumption of 52 kW • Compressed Air Consumption: 350 NL/min for milling machine, 500 NL/min for press • Suction Volume: 10600 m³/h • The machine ensures fast transport cycles with precise alignment • Includes a hydraulic pressing system for continuous jointing Iaedpfx Adoyabawsdjl • Features integrated dust extraction and suction systems Machine Benefits Technical Machine Benefits • Feeding & transport: conveyor belt with a speed of 75 m/min and power of 11 kw / feeding & transport: conveyor belt with a speed of 75 m/min and power of 11 kw / threading station max feed speed: 120 m/min, power consumption 22 kw • Workpiece dimensions: length: 150 - 2000 mm / width: 50 - 205 mm / height: 35 - 50 mm 60 / final length: 3000 - 00 mm • Milling machine: turbo milling combination with power consumption of 63 kw / milling spindle motor: 22 kw, 3000 rpm / chipper motor: 55 kw, 2880 rpm Dimensions Machine Depth 18500 mm

Condition: good (used), Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 160 mm -Piston diameter: 32 mm Isdpfxod Txgte Addsal -piston rod: 20 mm (connection: M12 x1.25 thread) -Air inlet and outlet: adjustable -Price: per piece -Number: 3 pieces -Dimensions: 310/46/H46 mm -Weight: 0.85 kg/piece

Condition: new, Year of construction: 2026, pressure 30.0 t stroke 200 mm table surface area 775 x 190 mm column travel between the guideways 775 mm ajustment speed 7.5 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 3.0 kW weight of the machine ca. 400 kg. dimensions of the machine ca. 1.500 x 700 x 1.800 mm Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., Iaodexaayhspfx Addel . but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Fixed hydraulic tank mounted on the side - Operating instructions

Condition: ready for operation (used), Year of construction: 2012, spindle speed (max.): 4,000 rpm, travel distance X-axis: 615 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 1,585 mm, number of slots in tool magazine: 72, number of axes: 7, This 7-axis Mazak Integrex i-300ST-1500U lathe was manufactured in 2012. It features a main spindle bar passage of 80mm, a tool changer with a capacity of 72 tools, and a milling spindle speed of 12,000 rpm. Additional highlights include a high-pressure cooling system at 14 bar, a chip conveyor, and a mist filter unit. Ideal for prototype production, the machine includes tooling, chucks, and jaws. For more information about this lathe, please reach out to us. Additional equipment • Mist filter unit • High pressure cooling (14 bar) • Work space rinse cleaning (2.7 bar/60 l) • RMP600-Radio/Radio probe • Preparation for 70 bar cooling through spindle • Programmable overload detector • C-axis on second spindle • MO321 - Gear milling without tool • TE810 - Preparation for Multi and Flash tools • NO117 - Tool edge control for 5-axis continuous / Axes movements: X / Y / Z / X2 / Z2 615 / 250 / 1585 / 230 / 1388 mm / W 1539 mm / C-axis indexing 0.0001° Machine Benefits Qualitative Machine Benefits • Comprehensive equipment for diverse machining operations (turning, milling, drilling, threading, etc. ) • Used exclusively with mazak service technicians • Lower turret number of tools 9 Technical Machine Benefits • Main spindle bar passage: 80mm • Milling head (b axis) speed: 12. 000rpm • No123 - tool radius correction for 5-axis continuous control • No137 - eia dynamic compensation i • No092 - synchronous threading for driven tool • Eia/iso continuous 5-axis control • Extensive tool capacity with 72-tool magazine (hsk-63 holders) Iaedpfx Adjx U Txisdel • Advanced 5-axis continuous control with various compensation and correction features • Max. Machining diameter 658 mm / max. Machining length 1519 mm / max. Workpiece weight 450 (1st spindle) / 400 (2nd spindle) kg • Main spindle motor power 30 (30 min. ) / 22 (continuous) kw / subspindle motor power 26 (30 min. ) / 22 (continuous) kw / Extra Information Machine still under power

Condition: good (used), Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod -Manufacturer: Rexroth -Type: 102553 -Type: 2492458 -Thread diameter: 48 mm -Thread pitch: 30 mm -Total length: 2285 mm Iaodpfxjcp Anme Addel -Weight: 34 kg

Condition: as good as new (ex-display), Year of construction: 2025, pressure 100 t stroke 300 mm table surface area 1070 x 260 mm column travel between the guideways 1070 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec oil volume 90.0 l engine output 5.5 kW weight of the machine ca. 1500 kg. dimensions of the machine ca. 2050 x 1000 x 2200 mm Display machine from 2025 With only approximately 2 operating hours Iaodexabcwepfx Addol Like new condition Special price upon request Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: good (used), Hydraulic motor, oil motor, hydraulic pump, hydraulic gear motor -Manufacturer: Danfoss, hydraulic motor with gearbox -Hydraulic motor: Danfoss Type: OMP 50 151-0028 6 -Gearbox: Nord SK 01 FF i= 5.83 -Hole spacing: 106 x Ø13 mm -Shaft: Ø20 x 40 mm Iaedpfx Ajwldupoddjl -Bolt circle: Ø 100 x 7 mm -Dimensions: 310/140/H180 mm -Weight: 13.5 kg

Condition: ready for operation (used), Year of construction: 2002, turning length 750 mm turning diameter 310 mm turning diameter over slide rest 175 mm spindle bore 32.0 mm tailstock quill taper MT 3 MK turning speeds 85 - 2200 U/min bed width 200 mm spindle taper DIN 55027 GR 5 total power requirement 2.2 kW weight of the machine ca. 710 kg range L-W-H 1884 x 717 x 1262 mm New price ~ 20.000 euros from a technical college (!!) - in checked condition - machine videos - ?v=iqU7Bkh6INo ?v=aSViqjk51Ik Furnishing: - Robust conventional center lathe - 3-jaw lathe chuck Ø 160 mm, with replacement jaws - "NEWALL" digital display, front left - MULTIFIX steel holder with 4x inserts - fixed bezel - moving bezel - Movable tailstock - Foot/spindle brake - Machine swing feet - User manual (PDF/NL) * all technical data: - Turning diameter over bed 310 mm - Distance between centers 750 mm - Turning diameter over support 175 mm - Spindle bore 32 mm - bed width 200 mm - Spindle mount / DIN 55027 GR 5 Iasdjxab Tpopfx Addel - Spindle taper 4.5 M - Spindle speed 85 - 2000 rpm. - Metric thread range 0.1 - 28 mm - Thread module range 0.1 - 1.75 - Thread DP range 4 - 70 - Adjustment range cross slide 150 mm - Adjustment range top slide 95 mm - Tailstock quill diameter 40 mm - Tailstock recording 3 MK - Tailstock quill travel 100 mm - Motor power 2.2 kW - Weight 770 kg

Condition: good (used), Hydraulic clamshell grapple, hydraulic rotary grapple, clamshell grapple, hydraulic grapple, digging grapple -Manufacturer: Kinshofer, clamshell grapple, type 604-350 -Bucket width: 640 mm -Filling capacity: 350 liters -Opening width: 1430 mm -Total height: 1300 mm Iedpfxettc Sfo Addoal -Mounting bolt: Ø 45 mm -Dimensions: 1430/640/H970mm -Weight: 270 kg

Condition: new, Year of construction: 2026, pressure 100 t stroke 300 mm table surface area 1070 x 315 mm column travel between the guideways 1070 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec oil volume 90.0 l engine output 5.5 kW weight of the machine ca. 1870 kg. dimensions of the machine ca. 2050 x 1000 x 2200 mm Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., Iajdpfsxaar Dox Addjl but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: good (used), Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade -Manufacturer: WMW PWS, saw blade Ø 630 x 7 mm Iodpfxow Auw Aj Addsal -Number of teeth: 264 teeth -Inside: Ø 80 mm -Bolt circle: Ø 120 x 22 mm -Quantity: 1x saw blade available -Weight: 10.3 kg

Condition: new, bore capacity in steel (diameter) 40.0 mm bore capacity in cast iron 45.0 mm throat 300 mm bore stroke 160 mm morse taper 4 MK table: 615 x 430 mm turning speeds 100 - 1800 U/min column diameter 145 mm thread M 24 ST60 thread M 30 GG20 feed 0.1-0.2-0.3-0.4 mm/U distance spindle /table 138 / 688 mm engine output 1.4 / 2.2 kW weight 470 kg Machine height 1865 mm NEW ALZMETALL MODEL RANGE 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Iodpfxexab Nkj Addoal Furnishing: - Thread cutting device * for thread cutting with a stop * max. 6 threads / min (thread cutting performance depends on the spindle speed) * Thread depth adjustable via depth stop * in the TFT - LCD display (3 tools). - Infinitely variable speed setting by means of an adjusting lever - Electromagnetic feed clutch * with overload protection and electrical * Comfort cross-handle switch * Feed rates selectable 0.1-0.2-0.3-0.4 mm / rev - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Paint: DD textured paint signal white RAL 9003, PANTONE 7545c, black - Machine oil first filling: oil bottle, loose delivery including special accessories: - 12. LED machine light - 24. Coolant system A * in the machine base

Condition: good (used), Pipe sealing cushion, leak sealing cushion, sealing plate, pipe sealing, penetration sealing -Pipe sealing cushions Ijdpfx Adova Rqnedeal -Outer diameter: 84 mm -Height: 20 mm -Bolt circle: Ø 51/7 mm -Supply of: steel/stainless steel cover plates possible -Number: 299 pillows available -Price: per piece -Minimum order quantity: 5 pieces -Weight: 0.1 kg/piece

Condition: new, bore capacity in steel (diameter) 40.0 mm throat 293 mm bore stroke 120 mm morse taper 3 MK table: 515 x 360 mm turning speeds 160 - 2250 U/min column diameter 115 mm thread M 24 ST60 thread M 30 GG20 feed 0.10 + 0.20 mm/U distance spindle /table 117 / 701 mm engine output 1.0 / 1.6 kW weight 270 kg Machine height 1840 mm NEW ALZMETALL MODEL RANGE 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display Iajdsxab Nwopfx Addjl * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device * for thread cutting with a stop * max. 6 threads / min (thread cutting performance depends on the spindle speed) * Thread depth adjustable via depth stop * in the TFT - LCD display (3 tools). - Infinitely variable speed setting by means of an adjusting lever - automatic spindle feed with feed overload protection - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Paint: DD textured paint signal white RAL 9003, PANTONE 7545c, black - Machine oil first filling: oil bottle, loose delivery including special accessories: - 25. Coolant system B.

Condition: good (used), Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Tapping chuck: MK3 mount Ijdpfxjrp Ikgj Addeal -Type: PH3/3 -Square: 7 x 7 mm -Bore: Ø 9 mm -Dimensions: Ø 80 x 225 mm -Weight: 3.0 kg

Condition: new, Year of construction: 2026, pressure 60.0 t stroke 250 mm table surface area 1040 x 370 (315) mm column travel between the guideways 1040 mm ajustment speed 8.0 mm/sec working feed 4.0 mm/sec return speed 10.0 mm/sec engine output 4.0 kW weight of the machine ca. 800 kg. dimensions of the machine ca. 1.700 x 700 x 2.100 mm Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount Iasdpfxoxaakgo Addsl - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Fixed hydraulic tank mounted on the side - Operating instructions

Condition: good (used), Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck -Mouth size: Ø 250 mm Iaodjd Itclspfx Addel -Short cones: 8 -Thread: M30 -Gradient: 1.5 mm -Weight: 38.5 kg

Condition: new, Year of construction: 2026, pressure 150 t stroke 300 mm table surface area 1070 x 290 mm column travel between the guideways 1070 mm ajustment speed 9.0 mm/sec Iaodpfx Asxabnaoddsl working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 11.0 kW weight of the machine ca. 2070 kg. range L-W-H 2200 x 1200 x 2550 mm Display machine from 2023 With only approximately 2 operating hours Like new condition Special price upon request Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck Iaedpfod Itcrex Addol -Mouth size: Ø 200 mm -Mounting thread: M20 -Gradient: 2.5 mm -Weight: 32 kg

Condition: new, table length unterschiedlich mm table width unterschiedlich mm table height (lateral area) unterschiedlich mm weight ca. 240 kg Iodpsxabvdjfx Addjal Description : - Special set for SIEGMUND 28 clamping tables - original SIEGMUND accessories (!!) included : - 1x 28 mm mobile tool trolley - 30x quick release bolts with short twist lock - 8x universal stop 150 L - nitrided - 4x universal stop 225 L - nitrided - 8x stop and clamping angles 175 L - cast - 2x stop and clamping angle 500 G left - nitrided - 1x stop and clamping angle 750 G left - nitrided - 1x stop and clamping angle 750 G right - nitrided - 1x stop and clamping angle 500 G left - nitrided - 1x stop and clamping angle 500 G right - nitrided - 4x stop and clamping angles 300 G left - nitrided - 8x prism Ø60-135° burnished - 16x Professional screw clamp - Nitrided - 6x Professional screw clamp 45°/90° - Nitrided - 4x universal stop 300 - nitrided - 1x accessory set consisting of: - eccentric, Allen key, brush, - other accessories such as: Probe CleanBasic, Probe Non-Stick and burner holder

Condition: good (used), Extension for square, square extension, tap extension, thread cutter extension -Square extension: Tap extension Thread cutter extension -Square: 32 x 32 mm -Total length: 285 mm -Number: 2x extension available -Price: per piece Isdowu Rnbjpfx Addjal -Dimensions: Ø55 x 285 mm -Weight: 3.1 kg/piece