Used Tool Carriage for sale (38,433)

Condition: used, Hardinge HLV-H High Speed Super Precision Tool Room Lathe Max’ Distance Between Centres 18” Max’ Swing over Bed 11” Godpfx Aoy Nfqmonlouc Max’ Swing Over Carriage 9” Max’ Swing over Cross Slide 6” Spindle Capacity: Though Spindle - 1 1/4” 5C Round Collets - 1 1/16” 5C Hex Collets - 7/8 5C Square Collets - 3/4” With Step Chucks – 1 1/16” to 6” With Jaw Chuck (Through Spindle) - 1 5/32” With Expanding Collets 3” Variable Spindle Speeds - 125 to 3000 rev/min Tailstock M/T 2 3 Phase Electrics Net Weight (approx.) 750Kgs Supplied with: 2 Axis Digital Readout 4 Jaw Chuck Faceplate 3 off Multifix Tool Holders Set of Misc’ 5C Collets For Sale Jet Machinery Ltd Jet Machinery Stock No: #79017 Machine Serial Number: HLV-H14793T Cost: £8,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Acer ‘E’ Mill Turret Milling Machine (Ex College) 2 Axis Newhall Spindle Taper R8 Spindle speeds to 60 – 4200rpm Table Size 50 x 10” Table Power Feed Longitudinal 415V Electrics Coolant For sale with Jet Machinery Ltd Jet Machinery Stock No: #79134 Guodpfx Ajyzfn Aenlec Machine Serial Number: 506016 Cost: £2,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 1990, x-travel 600 mm y-travel 400 mm z-travel 420 mm control TNC 355 Heidenhain Main spindle: turning speed range - main spindle 20 - 4.000 min/-1 power capacity - main spindel 7 kW transmission ratio 3 tool taper SK 40 distance spindle /table 127 - 567 mm spindle diameter in front bearing 55 mm stroke of quill vertical 75 mm tool clamping 10 kN swivellable +/- 90 ° work table: table surface area 900 x 458 mm T-slots 7x 63 x 14H7 feeds: feed range 1 - 5.000 mm/min Feed force 5,4 kN rapid traverse ( X / Y / Z ) 7 / 7 / 6 m/min total power requirement 13 kW weight of the machine ca. 3,0 t dimensions of the machine ca. 4,0 x 4,0 x 2,1 m Tool Room Milling Machine - Universal Godpfstqmm Aox Anljuc HERMLE - UWF 900 E - Spindle-Head swivable +/- 90°

Condition: good (used), Year of construction: 1982, functionality: fully functional, Tool milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control: Gsdpfx Answid Spoleuc Deckel Dialog Control 4: 3D contouring control, including drilling and milling cycles Monitor, electronic handheld control panel Terminal for program input and output Technical specifications: Travel range X/Y/Z 300 x 220 x 400 mm Speed 31.5 - 3,150 rpm with 21 gear stages Feed rate 4-2,000 mm/min Rapid traverse 4 m/min Drive power 1.6-2.0 kW SK 40 tool holder Hydraulic tool clamping Universal milling table with digital display: Clamping area 600 mm x 320 mm Table load 180 kg C-axis rotation range 360° A-axis tilt range 15°/45° B-axis swivel range +/- 45° Vertical milling head: Manual quill stroke - horizontally 65 mm, vertically 60 mm Additional equipment: Manual machine handwheels with scale Direct travel measurement of the NC axes Cooling water system Special accessories: Approx. 33 tool holders (without tools) - see photo High-speed milling spindle Machine data: Machine weight approx. 1,380 kg Space requirement including accessories L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm Power supply: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected with power and chippings by appointment.

Condition: used, 1x bending knife from a VOEST press brake Gjdpfey Tbvmsx Anleuc Length: 4050 mm Weight: approx. 120 kg For further dimensions see pictures.

Condition: reconditioned (used), Tool milling machine: Deckel Type: FP 2 Condition: Geometrically overhauled, used Year of manufacture: 1980s, geometric overhaul in 2026 Technical data: Travel distances X/Y/Z, approx.: 400 / 200 / 400 mm Tool holder: S20 Spindle speeds: (18) 40 - 2000 rpm Feeds: (18) 8 - 400 mm/min Head swivels: 180° Gujdpszcdarjfx Anlsc Equipment: - 3-axis digital display, new - Spindle protection device with limit switch, new - Machine light, new - Horizontal and vertical spindle - Fixed angle table - Coolant system - Chip tray

Condition: used, Year of construction: 2003, travel -x axis 180 mm Guedpfx Aoydqnfonlsc travel -z axis 370 mm Total weight, approx. 65 kg dimensions of the machine ca. 2,0 x 1,2 x 2,0 m Tool Presetter DMG Microset - ECO 1

Condition: used, Year of construction: 2001, longitudinal feed X: 490 mm Vertical feed Y: 320 mm cross travel Z: 660 mm Swivel range C: +/- 200 ° Control HMC 500 WWM Walter lenght tool piece capture A: 175 mm ISO 50 Gusdpsw E Npxsfx Anljc Max. rpm A: 60 min/-1 centre height 145 (190) mm max. workpiecediameter 320 mm max. workpiece length 320 (350) mm resolution 0,0001 ° Resolution 0,0001 mm spindle diameter 80 mm grinding wheel diameter max. 200 mm Max. rpm 0 - 7.000 min/-1 driving power - grinding spindle 24 kW max. Torque 6 Nm total power requirement 35 kVA weight of the machine ca. 4,65 t dimensions of the machine ca. 3,6 x 2,5 x 2,95 m CNC - Tool-Grinding-Machine WALTER - Helitronic Power Production - Optional for an additional charge: WALTER Heli ToolCheck (stock number 1039-9375) ?m=1039-9375&s=WALTER%20Heli%20Toolcheck

Condition: used, Year of construction: 2003, measuring range X-axis 300 mm measuring range Y-axis 290 mm measuring range Z-axis 650 mm tool diameter SK 50 mm Number of revolutions 30 U/min max. workpiecediameter 300 mm max. workpiece length 500 mm max. workpiece weight 40 kg accuracy +/- 0,002 mm Working speed X/Y/Z: 80 mm/s dimensions of the machine ca. 2,5 x 2,0 x 2,5 m weight of the machine ca. 1,2 t total power requirement 1 kVA Tool-Presetter Godpfxow E Np Sj Anlouc WALTER - Heli Toolcheck

Condition: used, Year of construction: 2003, travel -x axis 300 mm travel -z axis 400 mm tool taper VDI 40 / VDI 50 Gjdpfx Ansydqm Uslsuc Total weight, approx. 141 kg dimensions of the machine ca. 1,2 x 0,8 x 0,85 m Tool Presetter ULMER - Präzisa 400

Condition: used, number 1x tool adaptor VDI 50 Shank diameter 50 mm tool adaptor Capto C5 Torque max. 100 Nm Max. Speed 4.000 min/-1 weight 19,7 kg Driven Tool WTO 410505081-50 - Angle Drilling and Milling Attachment - Recessed - With Coromant Capto C5 Guodpfx Ansyycwreljc - Internal and external coolant supply - Max. coolant pressure: 80 bar ---- MACHINE APPLICATION ---- DMG Mori CLX/CTX 750 V1/V3/V4, ecoTurn 650 DMG MORI CTX beta VDI50 Disc Turret DMG CTX gamma VDI50 Disc Turret EMCO Maxxturn 110 (VDI50) GILDEMEISTER CTX 620 linear GILDEMEISTER CTX 650 Ecoline SAUTER Disc Turret VDI 50, DIN 5480, right VICTOR VTurn-36/40/45/46CV (DIN5480) - Machine interface: VD50A - Drive coupling: DIN 5480 - i (n1:n2): 1:1 - Direction of rotation: same - Coolant supply: IC 80 bar - Functional length LF: 124 mm - Projection length LPR: 183 mm - Functional width WF: 34.75 mm

Condition: used, Year of construction: 1997, turning speeds 3.000 U/min grinding wheel diameter 150 mm table-size 380 x 220 mm T-slots 1x 0 3~220 / 380 V total power requirement 0,37 kW weight of the machine ca. ca. 150 kg dimensions of the machine ca. 0,7 x 0,6 x 1,25 m Turning Tool Grinding Machine Gjdpfxjup H D Ee Anlouc GREIF - DHL K-0

Condition: used, Year of construction: 2016, measuring range X-axis 0 - 200 mm measuring range Z-axis 0 - 300 mm tool adaptor SK 40 / BT 40 Resolution 0,01 mm repeating accuracy 0,01 mm Gedpfeynbfcex Anljuc Ambinent temperature 0 - 40 °C dimensions of the machine ca. 0,30 x 0,19 x 0,64 m weight 44 kg Tool Presetter KELCH - set line V123

Condition: used, number 1x tool adaptor VDI 50 Shank diameter 50 mm tool adaptor Capto C5 Torque max. 100 Nm Max. Speed 6.000 min/-1 weight 19,5 kg Driven Tool WTO 410105085-50 - Drilling and milling unit - Straight with offset - with Coromant Capto C5 - Internal and external coolant supply - Max. coolant pressure: 80 bar ---- MACHINE APPLICATION ---- DMG Mori CLX/CTX 750 V1/V3/V4, ecoTurn 650 DMG MORI CTX beta VDI50 disc turret DMG CTX gamma VDI50 disc turret EMCO Maxxturn 110 (VDI50) GILDEMEISTER CTX 620 linear GILDEMEISTER CTX 650 Ecoline PITTLER PV 630, right-hand turret SAUTER disc turret VDI 50, DIN 5480, right-hand VICTOR VTurn-36/40/45/46CV (DIN5480) - Machine interface: VD50A - Drive coupling: DIN5480 - i (n1:n2): 1:2 Guodsyycwlspfx Anlsc - Direction of rotation: unequal - Coolant supply: IK 80 bar - Functional length LF: 160 mm - Cantilever length LPR: 160 mm - Functional width WF: 75 mm

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 2026, Knetspirale kneading tool Spiral for Diosna spiral Model: SP 80D stainless steel Guodpscphnpsfx Anlsc More Knetspiralen upon request!

Condition: good (used), Year of construction: 1998, Tool setting device, tool presetting device, milling cutter setting device -Z-axis: 630 mm Godpfx Anopam Avoleuc -unit of analysis -360 degree protractor -Dimensions: 570/1720/H1875 mm -Weight: 387 kg

Condition: used, Year of construction: 1970, total height: 1,700 mm, total length: 1,400 mm, total width: 900 mm, Colour: Grey Empty weight: 500 kg - Year: 1970 - Documentation available: No - CE certificate present: No - Serial number: CH - Motor power: 1.4kW - Transport dimensions: 1400mm x 900mm x 1700mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Gsdpfx Ajyxqzconlsuc Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2004, total height: 1,600 mm, total length: 1,250 mm, total width: 1,400 mm, Colour: Grey Empty weight: 900 kg Price: On request Gujdpfx Aneyr Rnzeljc - Details: - └ Description: Bad bearings - Year: 2004 - Documentation available: No - CE certificate present: No - Serial number: 102850 - Motor power: 1.0kW - Transport dimensions: 1250mm x 1400mm x 1600mm (l x w x h) - Transport weight [kg]: 900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2006, total height: 1,600 mm, total length: 1,300 mm, total width: 1,500 mm, Colour: Grey Empty weight: 900 kg Price: On request - Year: 2006 - Documentation available: No - CE certificate present: No - Serial number: 108088 - Motor power: 1.0kW - Transport dimensions: 1300mm x 1500mm x 1600mm (l x w x h) - Transport weight [kg]: 900kg - Transport packages [pcs.]: 1 Godpfxjytbc Ss Anlouc Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: refurbished (used), Year of construction: 2010, functionality: fully functional, feed length X-axis: 700 mm, feed length Y-axis: 850 mm, feed length Z-axis: 500 mm, type of input current: three-phase, grinding wheel diameter: 300 mm, overall weight: 9,500 kg, rotational speed (max.): 8,000 rpm, center height: 175 mm, power: 30 kW (40.79 HP), input current: 50 A, input frequency: 50 Hz, input voltage: 400 V, We offer this refurbished Haas Multigrind CB tool grinding machine, manufactured in 2010. Gedoza Emzopfx Anlouc Designation: Universal CNC tool grinding machine Trade name: Haas Multigrind Model/Type: Multigrind CB Year of manufacture: 2010 Serial number: 3023 Mains voltage: 3~400 V/230 V Frequency: 50 Hz Control voltage: 24 V DC Rated current: 50 A Fuse rating: 80 A Weight: 9500 kg If you have any questions or require further information, please send us a message or call us.

Year of construction: 2002, condition: excellent (used), V dimensions: 1.200 x 700 mm coil weight: 25 t Gjdpfx Aslimtkonlsuc stroke: 700 mm

Year of construction: 1994, condition: good (used), coil width: max. 2.000 mm coil weight: max. 30 t Gujdsd Ha Hcopfx Anloc stroke: 1.000 mm

Year of construction: 2002, condition: excellent (used), V dimensions: 1.200 x 700 mm coil weight: 25 t Gujdpfx Anelimqtelec stroke: 700 mm

Year of construction: 2017, condition: excellent (used), coil width: 1.650 mm coil weight: 15 t Gedpfxsinupve Anlsuc stroke: 600 mm year: unknown / overhauled in 2017

Year of construction: 1994, condition: good (used), coil width: max. 2.000 mm coil weight: max. 30 t Godpfx Anolimrxeljuc stroke: 1.000 mm