Used Toolroom Lathe for sale (5,314)

Condition: used, Year of construction: 1990, functionality: fully functional, Fanuc OT control 3 jaw Kitagawa chuck 620mm swing 1000mm between centres 10 station turret Tailstock Todpfx Abozakgtsujd Coolant pump and tank Swarf conveyor

Condition: excellent (used), Year of construction: 2015, workpiece weight (max.): 20,000 kg, spindle motor power: 90,000 W, spindle speed (max.): 75 rpm, turning diameter: 4,000 mm, turning height: 1,900 mm, Equipment: documentation/manual, £200,000 PRICE REDUCTION FOR PURCHASE BEFORE NOVEMBER 5 New 2015. Purchased 2022 for a project was cancelled before commissioning was completed and the machine has not been used in any production after commissioning. Very full documentation is available upon request. WE CAN SEND FILM OF MACHINE IN USE - ASK US! Main specification details. Turning diameter 3600mm. Maximum turning height 1900mm. Maximum table load 20,000kgs. Table speeds are infinitely variable between 14rpm and 75rpm. Table drive motor 90KW AC. Table torque to 61168NM. Z axis thrust 36000NM. X and Z axes traverse rates 1-5000mm/min. Tsdpfx Absy Uxdkeujd Ram is 320mm diameter Price, ex works BIRMINGHAM £130,000 VTT-WB can quote transport installation and commissioning

Condition: repair required (used), Year of construction: 2000, functionality: limited functionality, machine/vehicle number: 1130000731, spindle bore: 38 mm, spindle speed (max.): 7,000 rpm, spindle speed (min.): 1 rpm, travel distance X-axis: 628 mm, travel distance Z-axis: 175 mm, spindle motor power: 7,000 W, total height: 1,790 mm, total length: 1,600 mm, total width: 947 mm, type of input current: three-phase, overall weight: 1,250 kg, Equipment: documentation/manual, Machine for processing feed components with individual part feeding via a vibrating conveyor and a loading arm. Although the machine is still operational, it would need to be overhauled or can be used as a source of spare parts. The machine is being sold including the feeder and chip conveyor. This machine was taken out of service approximately one year ago. Tods Af Ryyspfx Abuod

Condition: repair required (used), Year of construction: 2000, functionality: limited functionality, machine/vehicle number: 0130000741, spindle bore: 38 mm, spindle speed (max.): 7,000 rpm, spindle speed (min.): 1 rpm, travel distance X-axis: 628 mm, travel distance Z-axis: 175 mm, spindle motor power: 7,000 W, total height: 1,790 mm, total length: 1,600 mm, total width: 947 mm, type of input current: three-phase, overall weight: 1,250 kg, Equipment: documentation/manual, Machine for processing feed components with individual part feeding via a vibratory conveyor and loading arm. The machine is still operational, but should be overhauled or can be used as a source of spare parts! The machine is being sold including the feeder and chip conveyor! This machine was taken out of service last month! Tedpfxo Af Nc Es Abuod

Condition: good (used), Year of construction: 2012, 370mm max. machining diameter, 651mm swing over bed, 461mm swing over cross-slide, 712mm max turned length, 3500rpm spindle, 76mm bar capacity, 12 station turret, 15kW spindle motor, Tedpfxez D Ayvj Abusd FANUC Oi control, 3 jaw chuck , C axis & Milling, Tool presetter, Tailstock, coolant, swarf conveyor.

Condition: excellent (used), Tacchi HD/1450 – 725 x 4000mm CNC Lathe (2012) Serial Number: 7264 Year: 2012 Control: Fanuc OiTD CNC Condition: Used – good working order Technical Specifications: Centre height: 725mm Swing over bed: 1450mm Swing over cross slide: 1000mm Distance between centres: 4000mm Main drive motor: 60 kW Maximum weight between centres (unsupported): 15,000 kg Spindle speed range: 1.9 – 560 rpm Features & Equipment: 2 x 3-point steady rests Handwheel Swarf conveyor 4-position hydraulic toolpost 4-jaw chuck Tedpfxexc In Sj Abued Fanuc OiTD CNC control

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: R0285, spindle bore: 70 mm, total length: 3,350 mm, total width: 1,550 mm, type of input current: three-phase, spindle motor power: 15 W, overall weight: 4,000 kg, workpiece diameter between centers: 290 mm, workpiece length between centers: 1,500 mm, CNC Lathe MONFORTS KNC 5 – 1999 For sale, a MONFORTS KNC 5 CNC lathe, year 1999, in very good overall condition. Ideal for precision turning operations, the manufacture of individual parts, as well as small and medium production runs. Technical specifications Brand: MONFORTS Model: KNC 5 Year of manufacture: 1999 Condition: Very good Color: White Weight: 3,300 kg Motor power: 15 kW Numerical control: Monforts Control System MTC K Programming: By teach-in Documentation: Available CE marking: Yes Machining capabilities Distance between centers: 1,500 mm Tjdo Agvttopfx Abued Center height: 250 mm Maximum turning diameter above the bed: 500 mm Maximum turning diameter above the cross slide: 290 mm Spindle bore: 70 mm Spindle speed: 2 to 2,800 rpm Included equipment 3-jaw chuck FORKARDT F+250 Collet chuck, see photo Soft jaws and reversible jaws, see photo Technical documentation Dimensions and transport Length: 3,350 mm Width: 1,550 mm Height: 1,800 mm Total weight: 3,300 kg Additional information Machine in very good condition Price shown excludes VAT – VAT is recoverable for eligible professionals, subject to applicable conditions. Machine can be viewed by appointment in Sprimont, Belgium. For any further information or to arrange a visit:

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, spindle speed (max.): 5,000 rpm, bar diameter (max.): 52 mm, counter spindle speed (max.): 4,500 rpm, TECHNICAL DETAILS Main spindle Bar diameter: max. 52 mm Main spindle speed: max. 5,000 rpm Main spindle power: up to 20 kW C-axis: available Tsdpfxs Afwtzs Abusd Counter spindle Counter spindle speed: max. 4,500 rpm Counter spindle clamping diameter: max. 42 mm Tool turret and tool drive Turret 1: 8 tool stations Turret 2: 6 tool stations Linear tool carrier: max. 6 tools Speed of driven tools: max. 6,000 rpm Tool drive power: 3.3 kW Rapid traverse: up to 24 m/min MACHINE DETAILS Coolant tank: 210 l Hydraulic pressure: 90 bar Dimensions & Weight Machine height: 1,750 mm Footprint: approx. 2.4 m² Machine weight: approx. 2,500 kg EQUIPMENT Synchronous/counter spindle Driven tools Bar loader up to Ø 52 mm Chip conveyor Workpiece removal via conveyor belt

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 147342, turning length: 514 mm, turning diameter: 350 mm, spindle speed (max.): 5,000 rpm, bar diameter (max.): 51 mm, TECHNICAL DETAILS Swinging diameter: max. 525 mm Turning diameter: max. 350 mm Turning length: max. 514 mm Bar diameter: max. 51 mm Spindle speed: 35–5,000 rpm Main drive power: 18.5 kW Constant torque: 333 Nm Spindle nose: A2-6 Spindle bore: 61 mm Tool stations: 12 X-axis travel: 190 mm Tedpfx Ao Afw Rrebuod Z-axis travel: 535 mm MACHINE DETAILS Weight: 5,650 kg EQUIPMENT 12-position tool turret

Condition: excellent (used), Tacchi HD/1450 X 4M Large Spindle Bore (515mm) Year 2002 Siemens CNC Control Swing over bed 1450mm Swing over saddle 1000mm Hollow spindle 515mm Chucks front and rear of Headstock Speed range 1.5 – 450 rpm 15,000kg weight between centres Tjdpexg Ivdjfx Abusd Baruffaldi 4 way Auto Toolpost 2 x 3 point steadies

Condition: used, Control: FANUC 0i-TD YOM: 2014 B-axis Max: 830° Tedpfx Abszy Iqususd X-axis Travel: 243 mm Y-axis Travel: 50 mm Z-axis Travel: 740 mm Chuck Dia 10” Max. Workpiece Diameter: 350 mm Spindle Speed: 4000 RPM Max. Bar passage: Ø 64 mm Tool turret: 12 positions Tool attachment: bmt-65 Sub Spindle chuck Dia 6” Sub spindle speed: 6–6000 rpm Spindle nose: a2-8 Sub spindle nose: a2-5 Complete with swarf conveyor Machine Depth: 2080 mm Machine Weight: 9600 kg

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: 16P10302-015, SPECIFICATION Swing over bed 400mm Tjdpfxsz Snlve Abuod Swing over the cross-slide 216mm Distance between centres 760mm Cross slide travel 216mm Spindle bore 54mm Spindle nose D1-6 camlock Spindle taper MT4 in bush Spindle rpm 150-2500rpm Spindle motor 5.57kW Tailstock travel 127mm Tailstock taper MT4 Footprint L x D x H 2090 x 1260 x 1800mm Approximate weight 1580Kg MACHINE EQUIPPED WITH: - Prototrak SLX control TRAKing 3 Jaw chuck Quick change toolpost and toolholders Enclosed guarding Coolant system Lighting Manual

Condition: reconditioned (used), Haas ST-30 CNC Lathe / Turning Centre (2015) Haas Classic CNC Control Standard chuck diameter: 254 mm / 10″ Maximum turning diameter: Up to 533 mm Maximum cutting length: 660 mm Bar capacity: 76 mm / 3″ Spindle bore: 88.9 mm Maximum spindle speed: 3,400 rpm Maximum spindle power: 22.4 kW / 30 hp Standard maximum spindle torque 407 Nm at 500 rpm Spindle nose: A2-6 X-axis travel: 318 mm Z-axis travel: 660 mm Rapid traverse, X and Z: 24 m/min Tool turret” 12 stations Swing over front apron: 806 mm Tsdpfx Abs Agn Dcoujd Swing over cross-slide: 527 m Supplied With: Three-jaw power chuck, 12-station tool turret with assorted holders, Tailstock with centre, Fully enclosed machining area, Haas control with colour screen and handwheel. For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79298 Machine Serial Number: 3103531 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 1492, turning length: 620 mm, turning diameter: 240 mm, spindle speed (max.): 4,200 rpm, controller model: Okuma OSP5000L, No minimum price – guaranteed sale to the highest bidder! Tedpo Afxvvefx Abusd TECHNICAL DETAILS Upper turret: 10 stations Lower turret: 8 stations Chuck: 250 mm / 10" Spindle nose: A2-6 Spindle bore: 62–80 mm Max. turning diameter: 240 mm Swinging diameter over bed: 450 mm Swinging diameter over cross slide: 300 mm Max. turning length: 600–620 mm Spindle speed: up to 4200 rpm Main motor: 15–20 kW Rapid traverse X/U: approx. 12 m/min Rapid traverse Z/W: approx. 15 m/min MACHINE DETAILS Control: Okuma OSP5000L Voltage: 380 V Phases: 3 Frequency: 50 Hz Max. power consumption: 49 kVA Total current: 82 A Max. motor current: 106 A Short-circuit strength: 10 kA Weight: approx. 5,500 kg Dimensions: approx. 2940 × 1730 × 1830 mm EQUIPMENT Documentation/Manual

Condition: good (used), Year of construction: 1990, functionality: fully functional, turning length: 2,000 mm, turning diameter: 1,000 mm, spindle bore: 104 mm, overall weight: 11,000 kg, CNC Lathe: SCNC 1000 DC x 2000 Year of manufacture: 1990 Tedpfo Agcwaex Abujd Control system: Fanuc O-TF Maximum swing over bed: Ø 1000 mm Distance between centers: 2000 mm Spindle bore: Ø 104 mm Machine weight: 11000 kg. Loading into a container or onto a truck is possible.

Condition: good (used), Year of construction: 2005, machine/vehicle number: SBLG 0005, Proto Trax VL 3 jaw SMW chuck 11KW Spindle motor 104mm spindle bore Spindle speeds 30-1800RPM 350mm swing over cross slide Tsdpfxjzb Ipze Abued X axis travel 280mm Z axis travel 1650mm 1750 mm between centres Coolant pump and tank

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, turning length: 250 mm, turning diameter: 150 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 150 mm, travel distance Y-axis: 60 mm, travel distance Z-axis: 285 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 25 m/min, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Tedpfxj Afxtzo Abujd Spindle motor power: 7.5 kW Spindle bore: 45 mm Spindle nose: A2-5 Spindle speed: min. 60 rpm Spindle speed: max. 6,000 rpm Turning diameter: 150 mm Turning length: 250 mm Chuck outer diameter: 203 mm Swinging diameter over cross slide: 150 mm Swinging diameter over compound slide: 250 mm X-axis travel: 150 mm Y-axis travel: 60 mm Z-axis travel: 285 mm Rapid traverse Z-axis: 25 m/min Rapid traverse X-axis: 20 m/min MACHINE DETAILS Input current type: Three-phase Dimensions and weight Dimensions (L x W x H): approx. 2,000 x 1,700 x 2,000 mm Machine weight: approx. 4,000 kg EQUIPMENT Documentation/Manual

Condition: ready for operation (used), functionality: fully functional, total length: 3,000 mm, total width: 1,500 mm, total height: 1,750 mm, spindle speed (max.): 2,300 rpm, spindle speed (min.): 1 rpm, type of input current: three-phase, overall weight: 1,800 kg, Lathe, fully functional, Pinacho S94 C 200. Todpfx As Aa Amzebued

Condition: used, Year of construction: 2000, 3 Muratec machines 1 MURATEC MT12 CNC lathe Tjdpfxe Aggc Ss Abujd Dual spindle, dual turret Year: 1999 + 1 STAUBLI RX90 robot with control center 1 Muratec MT12 CNC lathe with dual spindle and dual turret 4 axes Year: 2000 1 BOSS 542/32 CNC loading system 1 Muratec MT12 CNC lathe with dual spindle and dual turret Fanuc CNC Year: 1999 Supplied with all tooling and tool holders.

Year of construction: 1996, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 9611-1806, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine within the period of November 16th to November 26th. TECHNICAL DETAILS General Information Machine number: 9611-1806 Control system: Siemens SINUMERIK Electrical Data Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Working Area Maximum turning height: 1,240 mm Maximum turning length: 2,000 mm Spindle bore: 130 mm Chuck diameter: max. 130 mm Torque: max. 460 Nm Cross slide travel: 200 mm Tool Holder Tool holder: VDI 40 Tsdez Uql Ajpfx Abujd Tailstock Taper: MK 5 Tailstock diameter: 90 mm Automatic tailstock quill travel: max. 150 mm Transport Transport: possible on a standard truck EQUIPMENT Workshop cabinet Large quantity of VDI 40 tool holders Coolant system Loading system

Year of construction: 2016, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period of November 16th to November 26th. TECHNICAL DETAILS General Information Machine number: 0307-1866 Operating hours: 9,316 h Control system: Siemens SINUMERIK 840 Dsl Working height: approx. 1,300 mm Electrical Data Operating voltage: 400 V Frequency: 50 Hz Rated current: 315 A Workpiece Area Workpiece length: min. 780 mm Workpiece length: max. 3,000 mm Workpiece diameter: min. 20 mm Workpiece diameter: max. 200 mm Workpiece weight: max. 250 kg Workpiece Drive and Clamping Workpiece drive/clamping: 2 × hydraulically actuated front chucks, manufacturer SAV Chuck bore: max. 210 mm Spindles Tsdpfx Abjz Uhydsued Spindle power: 2 × 37 kW Speed: 2,200 rpm Cross slide NC1, left X1-axis: 450 mm Z1-axis: 1,980 mm Cross slide NC2, right X2-axis: 450 mm Z2-axis: 1,980 mm M-head slide Q1-axis, left: 1,980 mm Q2-axis, right: 1,980 mm Tailstock and steady rest slide W1-axis, left: 1,980 mm W2-axis, right: 1,980 mm Rapid Traverse Rapid traverse speed: max. 20 m/min EQUIPMENT Portal loading system PROMAT 2 loading units Chip conveyor Coolant system Matching VDI 50 tool holders Partially powered VDI 50 tool holders Chuck jaws Documentation

Condition: used, Year of construction: 1998, This model of machine is fitted with 2 independent sensitive hydraulic copy units that can work from either a template or sample. The first cutter would be set for roughing out, the second one for the finishing cut that will enable a component to be produced in one pass. There is still the possibility to programme a second automatic pass of the finishing gouge for heavy work. The machine is also equipped with hydraulic tailstock unit and hydraulic operated back knives. Year - 1998 CE The unique feature of the T5E is saddle movement by precision recirculating ball screw with programmeable electronic control to the feed speed to ensure optimum turning flexibility and quality. This precision feature allows the operator to perfectly control the saddle advance in relation to the complexity of the turning and the optimized saddle speed can then be stored within the memory of the machine. 2000mm turning capacity between centres NC electronic control to saddle movement with infinitely variable feed 0 to 12m/min Two speed 4/5.5hp motor giving six spindle speeds 900-1500-1800-2250-3000-4500rpm Two Hydraulic Copy Units each mounted with horizontal vee type gouges hss Tsdpfezd Uv Eex Abujd 2 Vertical back slides with knives for making dowel ends Max 95mm x 95mm square section with revolving Steady Max 175mm x 175mm square section without Steady Sliding guard for operator protection CE safety equipment

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Machine is fully functional. Tjdpfxj Agihfe Abuod

Condition: used, Year of construction: 1970, functionality: fully functional, centre height 120 mm spindle bore 20 mm Tsdpfx Aszndt Ijbujd copying device ja kW weight of the machine ca. 3 t

Condition: good (used), Year of construction: 2007, swing over cross-slide 935mm, swing over cross-slide 738mm, Maximum cutting diameter 620mm, Maximum cutting length 2158mm, Bar capacity 130mm, Spindle speed 2,400rpm, Tsdpjz D H Nujfx Abued Main spindle power 30 Kw, 12 station turret. Mori Control M730BM, swarf conveyor, 3 jaw chuck, fixed steady.