Used Tools Drawer for sale (37,407)

Condition: used, PARPAS Type AU engraving tool grinding machine Manufacturer's No. 854/36 Year of manufacture 1971 Grinding wheel diameter 100 mm Grinding spindle speed approx. 3500 rpm Motor power approx. 0.55 kW Mains connection 380 volts, 50 Hz - Collet chuck (DECKEL system with S20x2) - Collet chuck Ø 15.0 mm - Diamond grinding wheel dresser for the face of the grinding wheel Space requirement L x W x H 700 x 350 x 450 mm Weight approx. 80 kg good condition Godpfodzp T Tjx Aqiebr

Condition: ready for operation (used), Year of construction: 1990, Offered for sale is a Gildemeister tool presetter. Max. tool diameter: approx. 350mm, max. tool length: approx. 350mm, tool holders: ISO 40 / ISO 50. Foot pedal included. The control was replaced with Orion in 2021. Calibration and maintenance in 2023. Dimensions X/Y/Z: approx. 1100mm/650mm/840mm. An on-site inspection is possible. Gbedpoztzqhjfx Aqijr

Condition: used, various tool changing consoles / die loading arms available: 070022 GUETHLE-SWT CT 16/1600 (16 t / 1600 mm) with support leg (2x) 180006 GUETHLE-SWT CT 6/2700 (6 t / 2700 mm) with support leg (2x) 210008 GUETHLE-SWT CK t / 1000 mm) (2x) 210009 GUETHLE-SWT CK t / 1000 mm) (2x) 180010 unknown (2 t / 1500 mm) with support leg (2x) 190002 GUETHLE-SWT CT t / 1000 mm) with support leg (2x) 220019 GUETHLE-SWT CT 2/1000 (2 t / 1000 mm) with support leg (2x) 180002 GUETHLE-SWT CK 2/800 (2 t / 800 mm) (2x) 090054 GUETHLE-SWT CS 2/800 (2 t / 800 mm) swivelling (2x) Godpfx Aqjzrpn Esisbr 180003 GUETHLE-SWT CK 1/800 (1 t / 800 mm) (2x) 230001 Hydrap (1 t / 800 mm) (2x)

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, Universal milling machine Deckel FP3L with 3-axis Active TNC 113 - Digital display Heidenhain, point-to-point control, stepless feed Technical data: >> Year of manufacture 1980, machine no. 2302-2430 >> 3 axes, digital active display TNC 113 >> Swivel-tilt table (clamping area 1000 mm x 520 mm) >> Speed: 25 - 2500 rpm >> Feed and rapid traverse in 3 axes >> Feed from 5 to 500 mm/min, stepless >> Rapid traverse 1500 mm/min in all feed directions >> Drive power: 2 / 4 KW >> Travels X/Y/Z: 800/300/400 mm (Y travel can be adjusted by an additional 200 mm) >> Equipment: Vertical & horizontal spindle >> Vertical and horizontal quill, extendable - SK-40 >> Collet system S20x2 >> Weight approx. 2500 kg Accessories and equipment: >> 3-axis active digital display Heidenhain Godpfx Aqszquq Noiobr >> Coolant system About the machine: Offered is a Deckel FP3L universal milling machine in very good condition. The vertical head can be moved by 200 mm to enable an even larger working area. Even at maximum speeds, the milling machine runs smoothly. A central pump ensures lubrication of the various axes. The special feature of this machine type is its basic design; it is a machine with a slanted table bed. The movements are assigned to the spindle and thus to the tool. The accuracy is therefore very high, as different workpiece weights have no influence on the axis movements. Mechanically and electrically inspected. In this newer FP3L model, the feed can be adjusted steplessly in three axes; the machine also has a rapid traverse for each axis. A major advantage is the active 3-axis digital display. With this Heidenhain point-to-point control, you can enter dimensions that the machine will automatically move to. Take advantage of the opportunity to inspect and test the Deckel on-site while it is powered. For an additional charge, the machine can be delivered with CE conformity.

Condition: used, functionality: fully functional, Cutting torch hose assembly, Kjellberg, percut 370m, 1.5 m length, without cutting head, 11.846.921. Gbodpfx Aeztu D Ioqier

Condition: ready for operation (used), Year of construction: 1984, Immediately available from training center: MAHO Tool Milling Machine Model MH 600 Year of manufacture: 1984 Table: 700 x 400 mm Gbodpozrbvhofx Aqier Travel X/Y/Z: 500/400/400 mm Speeds: 40 – 2500 rpm SK 40 Spindle stroke: 80 mm Coolant system Drive: 4 kW Feeds: 8 – 400 mm/rev Head swivels 90/90 degrees Weight: 1900 kg Price: EUR 2,250.-- plus VAT, ex location.

Condition: ready for operation (used), Year of construction: 1995, Available immediately ex location: CNC tool milling machine Deckel, type FP 5–80, year of manufacture 1995, CNC control Dialog 12, universal table 750 x 520 mm. Travels X/Y/Z: 800/550/500 mm. Drive power: 9 kW. Quill stroke: 80 mm. Electronic handwheel. Spindle speeds: 32–5000 rpm. Feeds: 0–6000 mm/min. Weight: 4.5 t. Price: EUR 2,750 plus VAT, ex location. Gedpfxjzrbtys Aqijbr

Condition: like new (used), Year of construction: 2023, Technical specifications: Measuring range, X-axis: 400 mm Measuring range, Z-axis: 500 mm Max. tool length: 600 mm Max. tool diameter: ∅ 400 mm CNC control Dimensions (width x depth x height): approx. 1200 x 900 x 2100 mm Condition: Condition is almost like new, very little use. Godezrgdqopfx Aqisbr The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: good (used), Square broaching tool, multi-slot broaching needle, broaching tool, broaching needle, slotting tool, slotting tool, push broaching needle, keyway push broaching needle -Manufacturer: Forestry, Clearing Needle, Push Clearing Needle, 3 pieces -Type: see photos -Keyway width: 2x 10 mm / 1x 12 mm Gjdpszlgb Njfx Aqijbr -Submission/Price: complete -Transport dimensions: 1085/33/H32 mm -Weight: 6.5 kg

Condition: used, Swing bending machine with additional segmented upper tool, gooseneck rail. Swing bending press brake FASTI type 2095-25-2.5, serial no. 94 295 004, year of manufacture 1994. Working length 2540 mm, max. sheet thickness 2.5 mm, upper beam stroke 380 mm, bending beam motor power 2.2 kW, power supply 400 Volt, 50 Hz. - NC control FASTImatic FM100 - one-piece sharp rail 135° - additional segmented upper tool, gooseneck rail - controlled backgauge - continuous stop rail - controlled bending angle via control - electric foot switches. Weight 3000 kg. In good condition. Gbodpottc Uasfx Aqior

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 Gsdomck Ryepfx Aqisbr - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: used, Manufacturer ZOLLER GmbH Model Smile 400 Machine Type Optical CNC Tool Presetter / Tool Measuring Machine Measuring System Optical camera measuring system CNC-controlled measuring axes Automatic tool presetting Digital tool length and diameter measurement Measuring Capacity Maximum tool length: 400 mm Maximum tool diameter: 320 mm Maximum measuring radius (X): 210 mm These are the standard specifications for the Smile 400 platform. Tool Interface Installed with: SK50 measuring adapter Compatible with other Zoller adapters (HSK/SK/BT/CAPTO depending on tooling). Control PC-controlled measuring software Industrial Windows Embedded PC Optical camera measuring system Industrial PC ZOLLER IPC Model: ZQ57 / 9G (Chassis 5G) Intel Core i3 processor Windows Embedded 80 Plus Bronze industrial power supply LG DVD-RW drive USB ports Monitor Gjdpfxozqdpbs Aqiobr HP EliteDisplay industrial monitor Power Supply Industrial IPC: 100–240 VAC 50–60 Hz 4–8 A Accessories Visible SK50 master gauge Multiple tool adapters Calibration/master setting tool Industrial keyboard Mouse Complete cabinet Measuring station Industrial PC Machine Configuration Granite measuring base Vertical measuring column Camera measuring system Computer workstation Optical presetting system Applications Suitable for presetting: End mills Face mills Drill tools Boring bars Shell mills ISO40 ISO50 SK40 SK50 HSK tooling (with appropriate adapter) Approximate Weight Approximately 215 kg for the measuring unit (excluding workstation and accessories).

Condition: excellent (used), Collet chuck/quick-change inserts Cone 38 mm Collet cone diameter max. 27.7 mm Collet cone diameter min. 24.2 mm Length 45 mm Outer diameter 30 mm Gjdpewf Ha Isfx Aqijbr Stock number (28603)

Condition: used, Universal Milling Machine DECKEL Type FP 1 Godpfx Asr U St Ujqisbr Universal milling machine Machine No. 2101 – Year of manufacture: 1979 Manual travel X: 300 mm, Y: 160 mm, Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 – S20x2 Spindle speed: 40–2000 rpm, 16 steps Feed X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.5 and 1.9 kW, pole-changeable Electrical connection: 380 Volt, 50 Hz - Stepless feed in X and Z axes - Spindle speed via 2 motor speeds and 8 gear steps - Quill movement at the vertical milling head: 60 mm - Vertical milling head can be swiveled and extended horizontally by 100 mm - Fixed angle table 600 x 210 mm - Coolant system integrated in the machine base - Standalone control cabinet - Original chip tray for mounting on the machine base - Electrical schematic available Required space (L x W x H): 1350 x 1100 x 1700 mm Weight: 770 kg Good condition

Condition: used, Univ. Schwenk-Tilting-Rotary Table DECKEL Gbedpsd E A I Nefx Aqijr Universal tool and milling machine mounting table, suitable for FP 2L, FP 3L or FP 4L No. 2314 Year of manufacture: approx. 1975 Clamping surface: 1000 x 520 mm - 6 clamping slots, 16 mm, spacing 90 mm - Clamping plate can be rotated horizontally to the right and left up to 45 degrees, with a scale - Can be tilted +/- 15 degrees from/towards the machine - Can be swiveled +/- 15 degrees - Swiveling table, tilting table, angular table Permissible load max. 1000 kg Weight: 400 kg Good condition

Condition: used, Universal Tool Milling Machine MAHO Type MH 800 P with digital readout and HEIDENHAIN TNC 121 contouring control . 80983 Year of manufacture: 1982 Machine overhauled by MMD in 2008, subsequently used only occasionally in the workshop of an electronics company. Travel X: 700 mm, Y: 450 mm, Z: 500 mm Table size: 1050 x 627 mm Spindle taper: ISO 40 Spindle speed: 40–2000 rpm, 18 steps Feed X, Z-axis: 10–500 mm/min, stepless Feed Y-axis: 5–250 mm/min, stepless Rapid traverse X, Z-axis: 1.4 m/min Gedpfx Aov Amrysqijbr Rapid traverse Y-axis: 0.7 m/min Quill vertical travel: 100 mm Quill feed, vertical: 0.02 / 0.03 / 0.05 / 0.08 / 0.12 / 0.2 mm/rev Quill horizontal travel: 100 mm Spindle drive: 5.5 kW Power supply: 380 Volt, 50 Hz, 10 kW - NC contouring control HEIDENHAIN TNC 121 - Vertical milling head with automatic quill feed 0.02–0.2 mm/rev (6 steps) - Hydro-mechanical tool clamping - Coolant system integrated in the machine base - Universal rotary table, 360° rotatable, tilts and swivels 30°, 225 mm cross adjustment - Rotary table with direct indexing 72 x 5° and indirect indexing via index plate 1:120 = 1 rev = 3° - Swiveling control panel - Central lubrication - Operating manual - Machine mounted on steel plate L x W x H 1400 x 1000 x 50 mm = 550 kg Space requirements L x W x H 2650 x 2000 x 2450 mm Weight: 3700 kg + 550 kg steel plate Total weight: 4250 kg (actual) Very good condition

Condition: used, CNC Milling Machine DECKEL Type FP 3 A Tool-tool milling machine with handwheels, also for conventional operation Serial No. 2206 - Built in 1982 GRUNDIG CNC 2101 CNC control system Travel paths X: 490 mm, Y: 300 mm, Z: 340 mm Table size 705 x 425 mm Spindle mount SK 40 Quill stroke 100 mm Spindle speed 25 - 2500 rpm, 21 steps Feed rate 5 - 500 mm/min, continuously variable Rapid traverse speed 1200 mm/min Spindle motor power: 2/4 kW, pole-changing Power supply: 380 V, 50 Hz - GRUNDIG CNC 2101 CNC control system - Mechanical handwheels for all three axes - Universal tilt-and-turn table Gsdpfx Aqsv R E Rdjisbr - Vertical milling head tilts and is manually adjustable by 200 mm - Hydro-mechanical tool clamping - Coolant system in the machine base - Protective enclosure at the front and sides with three hinged doors - Control cabinet adjacent (L x W = 600 x 430 mm) Space requirement: L x W x H: 1900 x 1700 x 1950 mm Weight: 1700 kg (machine 1540 kg + electrical cabinet 160 kg) Very good condition

Condition: used, Univ. universal milling machine DECKEL, Type FP 1 Machine No. 28317, Year of manufacture approx. 1960 Travel distances: X: 245 mm, Y: 150 mm, Z: 340 mm Table size: 600 x 210 mm Spindle mount, horizontal: MK 4 - S20 x 2 Spindle speed, vertical: 95-1900 rpm, 12 steps Spindle speed, horizontal: 60-1200 rpm, 12 steps Motor power: 0.8 and 1.1 kW, pole-changing Power connection: 380 Volt, 50 Hz - Spindle speed controlled via 2 motor speeds and 6 gear stages - Feed in the X and Z axes - Coolant system with mechanical pump in the machine base Gbodpoiy Ekvsfx Aqior - Quill travel on the vertical milling head: 60 mm - Vertical milling head swivels +/- 90° - Metal substructure made of angle iron with machine feet Space requirement L x W x H: 1100 x 900 x 1650 mm Weight: 650 kg Good condition

Condition: used, Univ. universal tool milling machine DECKEL, Type FP 1 Machine No. 51265, Year of manufacture approx. 1967 Travel distances X: 300 mm, Y: 150 mm, Z: 340 mm Table size 600 x 200 mm Spindle mounting SK 40 - S20 x 2 Spindle speed 40-2000 rpm, 16 speeds Motor power 1.0 and 1.6 kW, pole-changing Mains connection 380 volts, 50 Hz - Feed in the X and Z axes - Spindle speed via 2 motor speeds and 8 gear stages - Quill movement on the vertical milling head 60 mm Gbedpfx Aqjghtvaeier - Swivel, rotary, and tilting angle table - Coolant pump in the machine base - Adjacent control cabinet Space required L x W x H 1100 x 1100 x 1600 mm Weight 690 kg Good condition

Condition: used, CNC Tool Milling Machine MIKRON Type WF 40C/3M with Heidenhain TNC 310 CNC path control Machine No. 440911 Year approx. 1985, overhauled and control retrofit in 11/2000 Travel distances X: 600 mm Y: 600 mm Z: 460 mm Table size 900 x 550 mm Spindle taper ISO 40 Distance spindle nose - table max. 520 mm Spindle speed 31.5 - 3150 rpm, 21 steps Feed rate 1 - 2000 mm/min. Rapid traverse speed X and Y = 5000 mm/min; Z = 4000 mm/min Quill stroke 100 mm Main spindle drive 4 and 5 kW Power connection 400 Volt, 50 Hz, 10.5 kW, 25 Amp. - CNC path control Heidenhain TNC 310, NC software: 286140 07, PLC software: MIKR1 - Spindle speed via 21 gear steps - Vertical milling head swivels left and right - Hydro-mechanical tool clamping vertical and horizontal - Central lubrication - Electronic handwheel - 62,815 operating hours shown - Control cabinet permanently attached to the machine rear - Coolant system integrated in the machine base - Swiveling operator panel - Electrical diagram, control manual available Gbjdpsw A Af Ijfx Aqior Space requirement L x W x H 2300 x 2000 x 2150 mm Weight 2900 kg Good condition

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Universal Milling Machine Machine No. 2101 - Year of manufacture: 1979 Travel (manual) X: 300 mm, Y: 160 mm, Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.4 / 1.8 kW, pole-changeable Power supply: 380 Volt, 50 Hz - Stepless feed in X and Z axes - Spindle speed via 2 motor speeds and 8 gearbox stages - Quill stroke at the vertical milling head: 60 mm - Vertical milling head tiltable and horizontally extendable by 100 mm - Fixed angle table 600 x 210 mm Gjdpfx Aqsr D T U Doiebr - Coolant system in the machine base - Separate control cabinet - Original chip tray mountable on machine base - Wiring diagram available Space required (L x W x H): 1350 x 1100 x 1700 mm Weight: 770 kg In very good condition

Condition: used, Precision Lathe BOLEY Type 4 LE Conventional High-Precision Universal Multi-Function Machine Tool Serial No. 42562 Centre Distance 500 mm Swing over bed 240 mm Centre height over bed 120 mm Swing over cross slide 140 mm Centre height over cross slide 70 mm Spindle bore 23 mm Chuck mounting M40 x 3.5 mm external thread Tailstock taper MK 2 Quill stroke / travel 80 mm Spindle speed 30 - 1300 rpm Drive power 1.1 kW Power supply 400 V, 50 Hz - 3-axis digital readout RSF ELECTRONIC, Type Z503ST-220 - Position display HEIDENHAIN, Type VRZ 136B for rotary encoder - LCD display unit for measuring equipment on accessories - Spindle speed adjustable via 2 V-belt stages, 2 gear stages, and infinitely variable via variator belt drive - Longitudinal feed via change gears + set of change gears - Several 3-jaw and 4-jaw chucks Ø 100, 125, and 140 mm with chuck jaws - MULTIFIX quick-change tool post size A with 8 exchangeable tool holders - Vertical slide with clamp - Several clamps and vices - Clamping plates + fixture tables - Indexing table as dividing attachment - Dividing head with collets and tailstock - Heavy dividing attachment with clamping plate and handwheel drive - WOHLHAUPTER spindle tools and milling cutters + collets - Rapid-traverse spindle with pneumatic drive - Milling slide with collet chuck - External cylindrical grinding attachment - Live centre - Steady rest - VOGEL central oil lubrication - Built-in mini compressor (3.5 bar) in machine base - Compressed air maintenance unit for tooling - Operating manual - Machine mounted on steel plate (steel plate 1200 x 540 x 20 mm) Gbsdpfx Ajw Dvv Aeqior Required space (L x W x H) 1650 x 950 x 1750 mm Weight lathe 660 kg (with steel plate) Weight of accessories 325 kg Very good condition

Condition: used, Year of construction: 2011, operating hours: 2,200 h, functionality: fully functional, power: 7.5 kW (10.20 HP), year of last overhaul: 2026, We are offering this used Schneeberger Norma CFG 7.5 kW tool grinding machine, manufactured in 2011. OPERATING HOURS: 2200! Automatic, programmable central lubrication system Pneumatic hoses completely renewed 4/2026 Gsdpfx Aqezqu Tdeiebr Standard version PLUS: - Hydraulic quick-change tool clamping system - Grinding wheel arbor HSK 50 - Quinto-Basic-SW woodworking tools - Coolant filter unit 330l; 6.3 bar - CO² fire protection system Optional accessories: - Manufactured in 2013 - MIL workpiece loader incl. quick-change gripper for profile knives and shank tools - 1 pallet for profile knives - profile thickness: 2mm; plate width up to 150mm If you have any questions or require further information, please feel free to send us a message.

Condition: good (used), functionality: fully functional, Feed rates continuously adjustable in all 3 axes Gbjdpfx Aszucrisqijr Spindle travel 60 mm Table surface 600 x 250 mm Spindle speeds 45 - 1950 rpm Feed rates 10 – 470 mm/min...continuously adjustable... Longitudinal travel (X) 315 mm Transverse travel (Y) 180 mm Vertical travel (Z) 320 mm

Condition: excellent (used), Tool cabinet for storing tool holders Godpfxovptwps Aqiobr Cabinet 1: Dimensions (LxWxH): 100x60x200 cm Space for 24 SK 50 tool holders (DIN 69871 or DIN 2080) The tool holders shown are included. Price: €590