Used Torsionally Soft Pipe for sale (4,027)

Condition: new, Year of construction: 2026, LAB 300 PLUS F 16 TERSA - Universal combination machine with aluminum sliding table and three milling speeds for sawing, milling, planing/thicknessing, and optional mortising torsion-resistant steel cast iron construction machine table made of cast iron, hardened and ground easy-running, anodized aluminum sliding table, 10-year warranty on wear of guide rails large fence system with extendable aluminum telescope fence and folding stops with combination saw fence with 45° quick adjustment max. saw blade diameter 315 mm with optional scoring unit, pivotable from 90°-45° helical steel feed roller for consistent wood feed during thicknessing four milling speeds, manually adjustable standard with right/left rotation of the milling spindle three independent motors for each working unit Scope of delivery: Combination fence/parallel fence Arc milling guard Tersa cutterhead Anodized aluminum sliding table Aluminum fence cheeks Folding stops Eccentric clamping arm Model LAB 300 PLUS F 16 Tersa Item No. 5500314 Technical data ---Technical data circular saw--- Fence length 1600 mm max. saw blade diameter with scoring 315 mm max. cutting height at 90° / 45° 100/79 mm max. ripping width to the left of the saw blade 1660 mm Cutting width on the parallel fence 800 mm Saw arbor speed 3500 rpm Redpfjcnxa Nox Abusch Saw blade inclination 90° - 45° ---Technical data planer--- Working width 300 mm Planer table length 1260 mm Cutterhead speed Cutterhead diameter / number of planer knives 72 mm / 3 pcs ---Technical data thicknesser--- Table dimensions 300 x 450 mm min. / max. working height 3 mm / 220 mm max. chip removal 4 mm Feed rate 7 m/min ---Technical data table saw--- Usable spindle length 100 mm max. tool diameter 180 mm, can be recessed max. tenon tool diameter 275 mm max. tool diameter, can be recessed 140 mm Spindle speed 3500/600/800 rpm Spindle diameter 30 mm Motor power 400 V / 50 Hz / S6 - 40% 4 kW (5.5 hp) S6 40% Weight 430 kg Dust extraction port diameter 4 x 120 mm Dust extraction port diameter saw blade guard 60 mm Sliding table with ball bearing system equipped with a proven ball bearing system permanently easy-running thanks to hardened and ground guides not susceptible to dust and dirt due to minimal contact point between the ball and the trapezoidal rail 10-year HolzKraft warranty on wear of the carbide guide rails Dust extraction hose connection The dust extraction ports of the planer (1) and thicknesser (2) point in the same direction. The dust extraction hose can therefore be connected to the machine from the same side for both types of planing. You do not need a hose that goes around the machine. Planing units helical steel feed rollers for a constant and even wood feed massive anti-kickback devices prevent the workpiece from kicking back 3-knife cutterhead ensures an optimal planing result

Condition: new, Year of construction: 2026, Mandrel-free pipe bending machine RB 54 - NC-controlled, with large program memory Article number: 4300054 NC control for setting the bending angle Up to 50 programs can be saved High-quality, robust design Fast tool change Purely motor drive Automatically returns to the starting position TECHNICAL DATA General information Bending radius max. 162mm Bending angle max. 210° Bending speed(s) 2rpm Torque 2341Nm Dimensions and weights Length (product) approx. 600mm Width/depth (product) approx. 220mm Height (product) approx. 470mm Weight (net) approx. 107kg Bending performance Bending performance of pipe material 420 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 350 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 650 N/mm² (Ø x wall thickness) 42 x 3mm Electrical data Drive motor power 1.1kW Connection voltage 400V Mains frequency 50Hz Rjdpfsvk Scgjx Abuoch Location: from stock - available immediately -

Condition: good (used), Year of construction: 2010, Striebig Panel Saw Compact 5220, Year of Manufacture 2010 Robust, self-supporting, firmly welded, and torsion-resistant saw frame Stable, durable saw beam steel construction Robust bearing of the motor carriage ensures high cutting accuracy Rcodpfx Aszhx A Rsbujh Powerful, low-vibration 3.9 kW motor (5.3 HP) TRK dust extraction system Automatically adjusting aluminum slat grid with plastic supports Device for wall mounting Ball-bearing support rollers Split center support at optimal working height, with aluminum grid Integrated small parts support made of wood Supersilent sound insulation to reduce saw blade noise Electromagnetic motor brake Saw weight approx. 910 kg Cutting depth 60 mm Saw motor power 3.9 kW (5.3 HP) Saw blade diameter 250 mm Saw blade bore 30 mm *1 Emission sound pressure level at the workplace LpA 82 dB *2 Saw blade speed 5250 rpm 2 dust extraction ports ø 100 mm Connection value 4.8 kW Mains connection 3 x 400 V / 50 Hz Cutting range: L: 4600; Hvertical: 2200 mm, Hhorizontal: 2100 mm Equipment: - Compact 5220 - Strip fence - Mechanically braked support rollers - Freestanding support complete Location: Available from stock in 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2008, Striebig Panel Saw Compact 5220, Year of Manufacture: 12/2008 Solid, self-supporting, firmly welded saw frame with high torsional rigidity Stable, durable saw beam steel construction Robust mounting of the motor carriage ensures high cutting accuracy Powerful, low-vibration 3.0 kW motor (S1) TRK dust extraction system Rsdpfx Ajzp Nt Aebusch Automatically adjusting aluminum slat grid with plastic supports Device for wall mounting Ball-bearing support rollers Split center support at optimal working height, with aluminum grid Integrated small parts support made of wood Supersilent sound insulation to reduce saw blade noise Electromagnetic motor brake Saw weight approx. 910 kg Cutting depth 60 mm Saw motor power 3.9 kW (5.3 HP) Saw blade diameter 250 mm Saw blade bore 30 mm *1 Emission sound pressure level at the workplace LpA 82 dB *2 Saw blade speed 5250 rpm 2 dust extraction ports ø 100 mm Connection value 4.8 kW Mains connection 3 x 400 V / 50 Hz Cutting range: L: 4600; H vertical: 2200 mm, H horizontal: 2100 mm Equipment: - Compact 5220 - Freestanding support, complete Location: Available from warehouse 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice Rcedpfx Absw Sgnkouoh

Condition: good (used), Year of construction: 2003, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 220 mm side roll diameter ~ 170 mm diameter of lower rolls ~ 190 mm bending speed ca. 2.0 + 5.0 m/min Control ELAP LYNX oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 5000 kg range L-W-H 3500 x 1550 x 1400 mm Current new price incl. accessories: approx. € 90.000 Special price on request Equipment: - Robust electro-hydraulic 4-roll plate bending machine - 4-roll design offers a wide range of bending and rolling capabilities - MG NC control unit "ELAP LYNX" * Operation – control of all rolls and machine axes * Digital position display * Manual operation via joysticks * Movable control panel - Two central rolls driven directly by hydraulic motors - Conical rolling possible via roll tilting - Side roll parallelism maintained via torsion shafts - Pre-bending on both ends - Diameters up to 1.1 times the top roll diameter are possible - Forged and hardened rolls (hardness: 53–55 HRC) - Low-maintenance, robust machine design - Permanent lubrication for all bearings - Sturdy welded steel construction Rsdpsz N Hxhjfx Abusch - Selectable bending speeds (2 settings) - Electro-hydraulic drop-end bearing for easy removal of rolled parts - Pressure gauge/display for rolls - Safety system (safety trip wire with switch unit) - Operating manual (PDF)

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, power: 190 kW (258.33 HP), filling opening width: 1,400 mm, filling opening length: 6,500 mm, number of blades: 286, rotational speed (max.): 56 rpm, rotor diameter: 390 mm, rotor width: 1,400 mm, Genox J1400 Series - Heavy Duty Horizontal Four Rotor Shredder suitable for processing long lengths of material i.e. pipe, profiles etc. 190kW combined shaft motor power (1 x 55kW + 3 x 45kW) and an 18.5kW hydraulic power unit for the material feeder. The machine is equipped with heavy duty oversized gearboxes giving an 80rpm shaft speed. Redpfx Asz H Az Esbuech Four 1400mm wide x 460mm diameter rotors with 286 pcs of blades in total. The blades are 40mm concave reversible design manufactured from high quality, heat treated alloy steel. Material force feeding is regulated according to motor loading to achieve optimal throughput. These parameters can be easily configured on site to suit the materials being processed. Output size is controlled by a replaceable screen mounted beneath the lower rotor shaft, the size of which can be determined to suit the application. We also manufacture an 800mm version of this machine along with twin rotor and twin shaft (shear rotor) machines. Please contact us for more information and/or to discuss your requirements.

Condition: used, Year of construction: 2025, Overview New complete filling and packaging line for beer and carbonated soft drinks in aluminium cans, with an output of 6,000 cans/h at 500 ml and 8,000 cans/h at 330 ml. The line runs from the depalletizer through can rinsing, filling and seaming, tunnel pasteurization, inspection and drying to sleeve labelling, tray shrink wrapping, ABB robot palletizing and pallet stretch wrapping. Two-floor layout: depalletizing on the upper floor, a clamping conveyor lowers the cans to the ground floor for all following machines. All machines are built by Ningbo Cixi except the ABB robot. Technical data Rcodpsz Dv Uyefx Abush - Year of manufacture: 2025 - Capacity: 6,000 cans/h at 500 ml Standard, 8,000 cans/h at 330 ml Standard - Can formats: 330 ml Standard (Ø 66 x 115.2 mm), 500 ml Standard (Ø 66 x 168 mm) - Lid size: 202 for all formats (plug Ø 52.40 mm) - Electrical supply: 380 V / 220 V, 50 Hz - Filler: compressed air and CO2 at 0.4 MPa - Pasteurizer heating: steam at 0.4 MPa, steam boiler not included Scope of Delivery - Depalletizer | XD400 | automatic tier sheet removal and empty pallet stacking, Siemens PLC and touch screen, 10,000 cans/h, 7.8 kW, approx. 8 x 4 x 3.3 m - Can lowering conveyor | JSJ-A | S-type clamping conveyor from the upper to the ground floor, fits both can formats - Can rinser | CX-1 | inline spray rinser, 2 sets of can cages, approx. 4,000 mm total length - Filler-seamer monoblock | AXW20-4Q | 20 filling valves, 4 seaming heads, automatic lubrication, change parts for Ø 66 mm cans, 7.5 kW, approx. 5,000 kg, 3,050 x 2,000 x 2,000 mm - Tunnel pasteurizer | BG-PLG | 8 temperature zones, 4 plate heat exchangers, 25 kW, 16,000 x 2,400 x 1,800 mm including heat exchangers and piping - Fill level inspection | YMXS-180G | inline - Leak inspection | inline internal pressure check - Can inverters | FGJ | 2 units - Air knife dryer | CG-1 | 24,000 cans/h, 7.5 kW fan - Can conveyors | magnetic chain conveyors, approx. 97 m up to the labeller with 13 drives and control cabinet, plus 22 m of belt conveyor from the labeller to the shrink wrapper - Sleeve labeller | SLM-150 | up to 9,000 cans/h, PM-1800 steam shrink tunnel with steam generator, mandrels for both can formats - Tray shrink wrapper | BT25 (TPM-250A) | film-only packs and tray with film, up to 25 packs/min, max. pack size 420 x 280 x 350 mm, approx. 3,000 kg - Robot palletizer | ABB | IRB 460 | 4-axis robot, 110 kg wrist load, 2.4 m reach, vacuum gripper for 6, 12 and 24 packs in both can formats - Pallet magazine | automatic, holds 8 to 10 empty pallets - Pallet conveyors | heavy-duty roller conveyors - Pallet stretch wrapper | automatic inline turntable wrapper, 2,000 mm turntable, loads up to 1,200 x 1,200 x 1,800 mm, 20 to 30 pallets/h, Siemens PLC and touch screen Condition New and unused, packed in export wooden cases. The photos show reference machines of the same models from the manufacturer's documentation. Availability Immediately. Location: Serbia.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Rear doors, sandwich panel construction Equipment: - Lashing rails - 6x lashing eyes - 30mm insulated wall Net price: €6,008.40 / Gross price: €7,150.00 Article number: TKC227351820.01 Technical data: • Brand: Vezeko • Model: TK C • Vehicle type: Box trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 355 x 184 x 205 cm • External dimensions (LxWxH): 521 x 237 x 267 cm • Loading height of the floor: 59 cm • Permissible total weight: 2,700 kg • Unladen weight: 775 kg • Payload: 1,925 kg • Chassis: Low-loader (wheels next to the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Reinforced, robust, bolted V-drawbar • Very stable aluminum frame • Frame is very torsion-resistant due to its robust design • Floor made of Finnish plywood • Many cross members, resulting in high point load capacity • Body made of very solid steel sheet sandwich, insulated, 30mm thick • Outer layers made of hot-dip galvanized and additionally powder-coated steel sheet • Roof made of GRP sandwich 25mm • 2-wing rear door with stainless steel locking mechanism • Continuous interior height: approx. 200cm • Continuous interior width: approx. 184cm • 2x maneuvering handles at the front • Doors with special sealing profiles made of hard/soft plastic • Rear frame made of hot-dip galvanized steel, welded • 6 lashing points embedded in the floor (750 DaN/kg) • Slot-hole lashing rail mounted on both sides, h=90cm • 100 mm impact protection around the interior • Maintenance-free rubber spring axles from ALKO • Reverse automatic • ALKO overrun device and parking brake • Plastic mudguards • 13-pole plug • Reversing light • Large-sized safety lighting • Integrated rear fog light Redjyivbzjpfx Abuoch • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any special requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT. - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp, side door, sandwich construction Equipment: - 30mm insulated wall - Lashing rails - Aero slope Net price: €6,718.49 / Gross price: €7,995.00 Article number: TKB115301519.07 Technical data: • Brand: Vezeko Rcodsyivb Ujpfx Abujh • Model: TK B • Vehicle type: Box trailer • Vehicle condition: New • First registration: No first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (LxWxH): 305 x 152 x 193 cm • External dimensions (LxWxH): 455 x 205 x 256 cm • Loading height of the floor: 59 cm • Permissible total weight: 1,500 kg • Unladen weight: 635 kg • Payload: 865 kg • Chassis: Low loader (wheels next to the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Reinforced, sturdy, bolted V-drawbar • Very stable aluminum frame • Frame is very torsion-resistant due to its robust construction • Floor made of Finnish multiplex • Many cross members for high point load • Body made of very solid steel sheet sandwich, insulated, 30mm thick • Outer layers made of hot-dip galvanized and additionally powder-coated steel sheet • Roof made of GRP sandwich 25mm • Aerodynamic slope on side wall • Aluminum ramp • 2x maneuvering handles at the front • Doors with special sealing profiles, made of hard/soft plastic • Side door, standard on the right front, with three-bolt safe locking system, lockable from inside and outside • Rear frame on hot-dip galvanized steel, solidly welded • 4 lashing eyes recessed into the floor (750DaN/kg) • Slotted hole lashing rail, mounted on both sides, h=90cm • 100 mm impact protection around the interior • Maintenance-free rubber spring axles from ALKO • Reversing automatic • ALKO overrun device and parking brake • Plastic mudguards • 13-pole plug • Reversing lights • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any special requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transit license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: used, functionality: fully functional, In this offer you are purchasing a mint condition resting ECG "GE CAM Connect 14" Object of sale: 1 x GE CAM Connect 14 with the following features: Mobile resting ECG Rcsdpewr Anbsfx Abueh 12 or 15 leads Easy to integrate into MUSE and PACS systems With automatic arrhythmia detection DICOM-compatible Condition: This is a used device which may show signs of use (minor scratches or yellowing). The device has been tested for function Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: good (used), Year of construction: 2007, total width: 8,000 mm, total length: 10,200 mm, total height: 5,600 mm, Arm horizontal travel X 6200 mm Arm vertical travel Y 1925 mm   Surface grinding and polishing head Seam Weld grinding head Seam weld back Gouging Edge preparation   Rcsdpoz Rwruefx Abueh Dished ends Head cones Vessels Shells Pipes   KS 1200 head combi wheel and belt grinding smalles ID internal 1450 mm Power 18.5 kW Disc 650 mm with 8-20 mm thicknes Contact wheel 300 mm belt size 100 x 2800 mm   Head is swivable - 20 to + 30 Degrees Large tooling package with spare disc and wheels Very little used Length:10200mm Width:8000mm Height:5600mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2003, Overview This KKT Kraus KLC 126 N is an air-cooled industrial chiller, built in 2003. It runs on refrigerant R407C, with the condenser fans on top and the control cabinet built into one end face. It served a Krones Contiform S24 blow moulder and was in production until March 2026. Dismantled in October 2026, it is now stored and ready for loading. Technical data - Manufacturer: KKT Kraus - Model: KLC 126 N - Year of manufacture: 2003 - Machine type: air-cooled chiller - Refrigerant: R407C, max. filling weight 43.5 kg - Max. operating pressure: 28 bar - Power supply: 400 V, 3 phases, 50 Hz - Max. power input: 64 kW - Max. current consumption: 118 A - Main fuse: 160 A - CE marked Equipment - Air-cooled condenser with axial fans on top of the housing - Integrated control cabinet with digital temperature controller, indicator lamps, selector switch and main switch - Pipe connections on the end face opposite the control cabinet - Enclosed steel housing Rcodpfx Aez Sp Nhobueh Condition Used chiller from 2003, in production until March 2026. Dismantled in October 2026 and stored. Availability Available immediately. Location: Germany.

Condition: used, Year of construction: 2023, Overview Single-module tunnel warmer by TMCI Padovan (SAP-Blendtech), built in 2023 for filled beverage cans. The machine brings cold-filled cans from 5 °C to 25 °C with a 40 °C water spray over a treatment surface of 9 m², at an output of 35,000 cans per hour. It was configured for 0.33 l and 0.15 l cans. The tunnel body, frame and pipework are stainless steel. The machine is steam-heated, with a multi-tubular heat exchanger for condensate recovery, and a Siemens PLC with teleservice and a touchscreen HMI runs the process. The machine is currently installed and was seen in operation. Technical details - Year of manufacture: 2023 - Output: 35,000 cans/h - Can sizes: 0.33 l and 0.15 l, diameter 58.4 mm and 53.3 mm - Treatment surface: 9 m², single deck, 1 module - Treatment time: min. 4.5 minutes - Product temperature: 5 °C inlet, 25 °C outlet - Spray water temperature: 40 °C - Steam consumption: approx. 508 kg/h at 3 bar - Make-up water: approx. 1 m³/h - Instrument air: approx. 500 Nl/h at 6 bar - Installed power: 9 kW - Electrical supply: 400 V, 50 Hz - Conveyor height: 1,200 mm ± 30 mm - Footprint: approx. 6,300 mm long, 2,450 mm wide (3,030 mm including side piping) - Height: approx. 1,800 mm - Service clearance: 800 mm around the machine - Connections: water inlet 15-20 °C max. 2 bar, steam 3 bar, air 1/2" at 6 bar, basin overflow DN 100, basin drain 1 1/2" BSP Equipment - Single-deck tunnel warmer, 9 m², 1 module - Multi-tubular heat exchanger for condensate recovery - 1.1 kW blower for water recovery - Tank with condensate booster pump - Air conditioning unit - Active infeed and outfeed conveyor - Side inspection windows on the spray zone - Siemens PLC with teleservice, touchscreen HMI with process overview Rcsdoz Sp Anepfx Abuoh - Profinet port, cycle pause and auxiliary start buttons, emergency stop, main switch, signal tower Condition and availability - Built in 2023, currently installed and in operation - Layout drawing available - Availability on request - Location: Albania

Condition: used, Year of construction: 2016, Overview This Speidel Braumeister 200 L is a compact all-in-one brewhouse: mashing, lautering and wort boiling take place in a single vessel. The unit was bought new from Speidel in 2016 and has been used exclusively for craft ales (top fermentation), with about 280 brews. It was in production until August 2026 and is now dismantled and stored in a climate-controlled warehouse. The malt pipe sits inside the kettle; the recirculation pump drives the wort through the grain bed, and the integrated lifting device raises the malt pipe for lautering. The automatic controller runs the brewing programme. Technical data - Manufacturer: Speidel - Model: Braumeister 200 L - Year of manufacture: 2016 - Nominal brew volume: 200 L - Power supply: 400 V, three-phase, 50 Hz - Power: 9.3 kW; heating 3 x 3,000 W - Dimensions: approx. 136 x 90 x 208 cm including lifting device - Weight: approx. 150 kg - Control: automatic - Utilities: no cooling water and no permanent drain connection needed in normal operation Equipment - Stainless steel lid - Malt pipe with perforated filter plates, fixing bar and clamp - Lifting device for the malt pipe - Recirculation pump - Automatic controller - Hoses, external connections, cable and three-phase plug Redpfez Sr Uyox Abuoch - Printed manual; invoice, CE certificates and original documentation available Condition Used, in excellent condition: no known faults, leaks or pending repairs. Pumps, heating elements, seals and controller are original. Maintained quarterly according to the manual; routine cleaning with warm water and alkaline detergent, with caustic soda and nitric acid every five brews. The unit sits on its own frame and can be loaded without a pallet. A second, identical unit is available as a separate offer. Availability Available immediately. Location: Spain. Viewing is possible by appointment.

Condition: used, CTS Type: TSS-70/130 Water-cooled cooling unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. The device is used for performing temperature shock tests and is typically used in industry, research, and quality assurance. Application areas: Material tests Aging tests Electronics and component tests Temperature shock and cyclic temperature tests Technical data: Type: TSS-70/130 Test volume: 130 liters Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K in time ±2 K spatially Temperature change rate: max. 100 K/min on average for shock test tests without heat input Temperature adjustment rate: ≤ 15 min in the range of -65°C to +200°C with 10 kg of ICs Cycle time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 17.2 kW Rated current: approx. 29 A On-site protection: 32 A slow-blow fuse Connection: Cekon 32 Rcjdpfx Abey Hkd Hsush Refrigeration system: Refrigerant: R404A / R23 water-cooled, low-noise, fully hermetic Equipment / Features: CTS control panel Microprocessor-controlled control and monitoring system Program operation up to 100 test programs possible digital setpoint and actual value display RS232 interface 2 free switching channels for on-site control of the test specimen Fault message on potential-free contact Load up to 30 V DC, 2 A EMC tested Technical design: Hot and cold chamber Mobile frame with lifting spindle drive Test chamber / mobile frame made of stainless steel, material no. 1.4301 Insert basket made of stainless steel wire Pipe passage NW 50 with sealing plug Compressed air connection 1/4" AG Condensate drain non-pressurized R 1/2" internal thread Safety door lock lockable door with window Dimensions according to installation diagram: External dimensions approx.: 2335 x 940 x 1820 mm Loading dimension approx.: 1990 x 940 x 1652 mm Test chamber dimensions: height approx. 410 mm Width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Other data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh For your safety as a buyer, the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: see pictures (Changes and errors in technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: new, power: 368 kW (500.34 HP), axle configuration: 4x2, color: white, driver cabin: sleeper cab, gearing type: automatic, Year of construction: 2026, Equipment: ABS, EBS, air conditioning, - Braking system Available in multiple units!!! Rodoz Si Urspfx Abujch Equipment: Preparation for auxiliary drive Emission standard EURO VI E DRIVE T. 315/70R22.5 Speed limiter 90 km/h Roof hatch, electric version Front grille design Standard black Driver's cab tilting mechanism, manually operated Mirror Cams Cover for AS FHS in vehicle color / For AT/AD in black AS driver's cab high roof Driver's cab roof insulation, standard Sun blind for side window Driver's side dashboard design: plastic with black trim strips COC - Certificate of Conformity INSTRUMENT CLUSTER 10 INCHES Passenger seat, static Weight variant front axle 8,000 kg / rear axle 11,500 kg (technically possible 13,000 kg) Air compressor, 2-cylinder, 630 ccm, with integrated clutch, demand-controlled Smart generator 2880 W (24V x 120A), demand-controlled Air suspension on front axle Batteries in the frame overhang Wheel chocks, 2 pieces SR-SOLO LIGHT 17x Stabilizer bar, front axle Exhaust pipe, to the left Air filter unit under the driver's cab Preparation for toll system (OBU), including antenna and wiring on the dashboard without receiver unit ConnectivityBox 4G, telematics contract optional Engine idle shutdown Standard engine setting Cursor 13 Tire pressure monitoring system (TPMS), sensors inside 4 DIN slots, storage compartment above, VDI interface (Vehicle-Data-Interface) for telematics services (FMS), version 4.0 Infotainment 10" TFT display Transmission software ECO-Roll (coasting function) GPS cruise control Hi-Cruise Adaptive cruise control (ACC) Extended driver distraction warning system Standard step behind the driver's cab (catwalk) Hill start assist, for comfortable starting on inclines Electronic stability program (ESP) Rear monitoring system with camera, blind spot monitoring system (BSIS), right Intelligent speed assistant (ISA) Side marker lights Front area monitoring system (MOIS) Emergency braking assist (AEBS) Preparation for alcohol interlock (ALC) with cable Alcoa aluminum rims, LVL ONE Painting of the driver's cab plastic parts in the driver's cab color Luggage compartment on the left and right IVECO logo, gunmetal grey Air suspension for driver's cab Black decorative film on doors Sun visor, transparent, installed on the outside of the driver's cab roof Premium refrigerator and storage box EC control unit digital 4.1 ADR Auxiliary heater, diesel/water 4kW Air conditioning, fully automatic in connection with stationary air conditioning With curtains on the bed Lower bed, one-piece, firmness/lying feel – soft, incl. adjustable headrest Signal horn behind the bumper (compressed air) Electronic immobilizer and 3rd vehicle key Hands-On-Detection (HOD) Leather steering wheel Driver's seat HI-Comfort, air-sprung, with 3-stage cooling or heating function Smart storage compartment above Electro-hydraulic power steering Air tank in aluminum version, number depending on suspension version and trailer version Without jack Battery 210 Ah, high-performance AGM, battery disconnect switch, electric, in the driver's cab and on the chassis frame according to ADR/GGVS Ride height, standard Fifth wheel coupling, manufacturer Jost Fuel tank 1190 liters (710 liters right and...

Condition: new, power: 368 kW (500.34 HP), axle configuration: 4x2, color: white, driver cabin: sleeper cab, gearing type: automatic, Year of construction: 2026, Equipment: ABS, EBS, air conditioning, - Braking system Available in multiple units!!! Equipment: Preparation for auxiliary drive Emission standard EURO VI E DRIVE T. 315/70R22.5 Speed limiter 90 km/h Sunroof, electric version Front grille design Standard Black Cab tilting mechanism, manually operated Mirror Cams Cover for AS FHS in body color / For AT/AD in black AS cab, high roof Cab roof insulation, standard Sun visor for side window Driver's side dashboard design: plastic with black trim COC (Certificate of Conformity) INSTRUMENT CLUSTER 10 INCHES Passenger seat, static Weight variant, front axle 8,000 kg / rear axle 11,500 kg (technically possible 13,000 kg) Air compressor, 2-cylinder, 630 cc, with integrated clutch, demand-controlled Smart generator 2880 W (24V x 120A), demand-controlled Air suspension on front axle Batteries in frame overhang Wheel chocks, 2 pieces SR-SOLO LIGHT 17x Stabilizer bar, front axle Exhaust pipe, to the left Air filter unit under cab Preparation for toll system (OBU), includes antenna and wiring on the dashboard without receiver unit ConnectivityBox 4G, telematics contract optional Engine idle shutdown Standard engine setting Cursor 13 Tire pressure monitoring system (TPMS), sensors inside 4 DIN slots, storage space above, VDI interface (Vehicle-Data-Interface) for telematics services (FMS), version 4.0 Infotainment, 10" TFT display Transmission software, ECO-Roll (coast function) GPS cruise control Hi-Cruise Adaptive Cruise Control (ACC) Advanced Driver Distraction Warning Standard catwalk behind the cab Hill start assist (Hill Holder), for comfortable starting on inclines Electronic Stability Program (ESP) Rear view monitoring system with camera, Blind Spot Information System (BSIS), right Intelligent Speed Assist (ISA) Side marker lights Front over-run protection (MOIS) Advanced Emergency Braking System (AEBS) Preparation for alcohol interlock (ALC) with cable Alcoa aluminum rims, LVL ONE Painting of cab plastic parts in cab color Storage compartment left and right IVECO logo, Gunmetal Grey Air suspension for cab Black decorative film on doors Sun visor, transparent, installed on the outside of the cab roof Premium refrigerator and storage box Digital EC control unit 4.1 ADR Auxiliary heater, diesel/water 4kW Fully automatic air conditioning in conjunction with stationary air conditioning With curtains on the bed Lower bed, one-piece, firmness/feel – soft, including adjustable headrest Horn behind bumper (compressed air) Electronic immobilizer and 3rd vehicle key Hands-On-Detection (HOD) Leather steering wheel Driver's seat HI-Comfort, air-suspended, with 3-stage cooling or heating function Smart storage space above Electro-hydraulic power steering Air tanks in aluminum version, number depends on suspension version and trailer version Without jack Battery 210 Ah High Performance AGM, battery disconnect switch electrically in the cab and on the chassis frame according to ADR/GGVS Standard ride height Fifth wheel coupling, manufacturer Jost Rsdpfx Asz Si Uxebuoch Fuel tank 1190 liters (710 liters right and...

Condition: new, mileage: 500 km, power: 129 kW (175.39 HP), color: white, gearing type: mechanical, emission class: euro6, loading space length: 36,500 mm, loading space width: 22,000 mm, loading space height: 3,800 mm, Equipment: ABS, air conditioning, central locking, power assisted steering, - Mr. Rudolph will be happy to assist you by phone at: ! 2 vehicles available ! Rodoy Ubqtjpfx Abusch Front axle suspension: Quad-Tor torsion bar suspension, Engine: 3.0 l D EVIe 129kW (176 hp), Transmission: 6-speed manual FPT 2850.6, Permissible total weight Daily 7.0 t / 7.2 t, Rear axle suspension: Leaf spring suspension, Rear axle: Twin tires, Wheelbase: 3450 mm, Seats: Not heated, Seatbelt pretensioner: Passenger side, Seat covers: Fabric, Comfort seat for driver with armrest and lumbar support, adjustable in height, inclination, and longitudinal direction, hydraulically sprung, Connectivity Box 4G incl. TCO service contract, Headlights: Front halogen, Daytime running light control, Digital tachograph EG 4.1, Battery: 12 V 105 Ah (AGM), Light and rain sensor, High beam control: Manual, Mirrors: For body width 2350 mm, Blind spot radar behind cab, Turning assistant: Passenger side (BSIS), Tire pressure monitoring system (TPMS), Front field monitoring (MOIS), Proactive steering assistant with lane keeping assist (ELK), Paint: Standard, Emergency braking assistant AEBS with City Brake, Taillights: Standard, Exterior mirrors: Electrically adjustable and heated, Cab width: 2000 mm, Driver drowsiness detection system (DriverDrowsinessAttentionWarning), Rear wall insulation, Traffic sign recognition with intelligent speed assistant (ISA), Electric windows for front doors, Left-hand drive for right-hand traffic, Front airbags for driver and passenger with seatbelt pretensioners, Steering wheel: Plastic, Speed limiter: 90 km/h, AdBlue tank: 20 liters under cab, Trailer load: 3.5 t, ESP system, Underrun protection: Rear, Steel rims, Fuel tank: 90l integrated, Parking brake: Manual, center, C-profile steel ladder frame, Tires: 225/75 R16, Rear axle ratio: i 4.23, Emission standard: EURO VI E, Eco-Smart function, Diesel particulate filter, Settings for special fuels (HVO/GTL), Comfort headrests, Bench seat for passenger with multi-function storage and compartment, Additional speed limiter, Body manufacturer interface with expansion module + CAN BUS 2.0B, Trailer socket: 12V 13-pin, Rear view camera, Vehicle key: Additional, with remote control, Roof storage compartment above windshield, USB socket: Driver and passenger side, Preparation for toll system (OBU), includes antenna and wiring on the dashboard without receiver unit, Trailer coupling: Automatic on SQT, Trailer coupling: Ball head, Auxiliary drive: Hydrocar 25I2, Exhaust pipe: Side left, White IC 194, USB socket: Driver and passenger side, Digital radio DAB with 7-inch touchscreen, Fog lights, Air conditioning: Manual, Cruise control, Electronic differential lock (EDS) Traction Plus with hill descent assist, Oil pan protection, Cab rear wall with window, Dautel tipper, and more. Mr. Rudolph will be happy to assist you by phone at: If you would like to lease or finance the vehicle, we will be happy to provide you with an individual offer. We will also be happy to accept your used commercial vehicle in part exchange. ! Errors and prior sale excepted ! Further information can be found on our website: ... ESP, Particulate filter = Further information = Engine displacement: 2,998 cc GVWR: 7,000 kg Please contact Tobias Ebert for further information.

Condition: used, Year of construction: 2004, operating hours: 2,000 h, machine/vehicle number: PST17, Used Pasteurizer brand PG Completely Overhauled Used Pasteurizer Completely Overhauled for jars or cans in d.b. PG brand, all stainless steel with squared stainless steel mesh, complete with 4 water recycling tanks with relative pumps. Pasteurizer equipment for sale with inlet and outlet belt, blower for drying jars or boxes at the outlet, steam modulating group, shell and tube heat exchanger, various pipes connections, and all its accessories for operation. The pasteurizer equipment for sale is totally overhauled Pasteurizer equipment is made up of two sectors of 9500 mm each Overall dimensions of the Used Pasteurizer PG: Total length 19.00 m Useful belt length axis by axis: 18.60 ms Useful net width 2.50 m. Overall width 2.70 m machine body Overall width including trays 3.30 m Total useful area of the Used Pasteurizer Completely Overhauled sq.m. 46 Features by section: Sterilization length: mm. 8,600 Pre-cooling length: mm. 2,500 Length of warm water cooling: mm. 5,000 Cooling length: mm 1900 Single track entry belt width: mm 150 Length: mm 3800 Outfeed belt with 4 lanes width: mm 350 Pasteurizer equipment for sell length: mm 3500 Services for pasteurizer equipment for sell: We also offer the machinery reinstallation service at your company if you need it. We will create a dedicated offer if you wish, only after receiving all the necessary information. Upon request, we can also modulate the control panel and intervene on the machine’s PLC. This is used to customize the functionality of the used pasteurizer for sale. If requested, we also provide the packing service if the goods are destined abroad and with transport by ship. One of our team of technicians will be at your service and will create a tailor-made project for your company. We have many solutions available for this pasteurizer equipment for sell, contact us at the numbers on the site for more information and to receive a quote for one of our used bottling machines. Additional information: For this pasteurizer equipment for sell it is necessary to build the electrical panel, this is missing in this equipment. Rcsdpfxjvguhws Abujh Its construction is therefore carried out and created with the customer’s specifications, adapting the pasteurization areas to the production needs. Its speed on the 65 diameter is approximately 18,000 pieces per hour, speaking of cylindrical containers. This used tunnel pasteurizer is ideal for both tomato preserve jars and for tinplate and aluminum cans. Both fruit juices and soft drinks and even tomato puree can be pasteurized. The used tunnel pasteurizer has already been overhauled and is ready to be purchased and delivered to the end customer, we will follow all the issues related to its loading on trucks or containers included in the price.

Year of construction: 2010, condition: like new (used), functionality: unexamined, machine/vehicle number: TUBE-MATIC-1200-CNC-3376, Equipment: 3rd hydraulic function, Unused SAFOP,ITALY Make Heavy Duty Bevelling Machine Upto 1200 MM ,CNC,Siemens Control,available for Sale IN Southern PArt Of INDIA fore an very Attractive Price. Rsdszrkwnepfx Abuech

Condition: used, fuel type: diesel, Equipment: air conditioning, AdBlue system: Yes Year of manufacture: 2018 Operating hours: 7.882 Drive: Wheel Empty weight: 19.580 kg Make of engine: Isuzu Top speed: 35 km/h Rcodpfx Aboza Rn Rjuoh Please contact Kristoff Van Havere for more information = Additional options and accessories = - 2-piece boom - Ad blue - Additional hydraulics - Auto / hydraulic quick coupler - Auto lubrication system - Battery disconnector - Blade - Boom suspension - Hammer/shear hydr. circuit - Hydraulic adjustable boom - Pressurized cabin - Quick coupler - Rotating beacon - Safeload indicator - Safety line rupture valve - boom/hoist - Safety line rupture valve - dipper/stick - Slope/rotator hydr. circuit = Remarks = - Hydraulic quick hitch CW30 - Bucket 1800mm - Piping for hammer and sorting grab - Central grease system - Auxiliary piping for hammer and sorting grab - Cab overpressure filter unit

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth, 1 set -Jaw width: 20 mm -Attachment: Material steel -Dimensions: see photo technical drawing -Transport dimensions: 200/90/H85 mm Rsdpfxjz Tflhs Abuoch -Total weight: 2.6 kg

Condition: used, maximum load weight: 6,800 kg, overall weight: 9,900 kg, axle configuration: 1 axle, first registration: 10/2026, Year of construction: 2026, Müller-Mitteltal KWH 9,9 ML Cable Transport Trailer with Diesel Engine * KWH 9,9 ML * Drum brake braking system EBS 2S/2M * BPW axles * Leaf spring suspension, parabolic spring * Spring-supported square tube supports at the rear with base plate and safety locking pins for various support heights * Drawbar with 40 mm or 50 mm screw-on drawbar eye (height-adjustable, in mm) * Bracket for additional drawbar, mounted on the side of the drawbar, on the right side in the direction of travel * Chassis made of torsionally rigid square tubes and cross members * Plastic toolbox Rsdpfjy R Ipnex Abuoch * LED lighting * Swiveling cable drum assembly consisting of a base frame, bearings, and drum support arms * Support arm ends with clamping device for securing the drum shaft * Locking of the swiveling cable drum assembly to the chassis via a centrally located claw lock * Steel drum shaft, 76 mm diameter, with centering and rotatable ends * With a drum diameter of 3,000 mm, a maximum drum width of 1,650 mm is possible * Motor-hydraulic pull and push cylinders with load-holding valve * Control valve with automatic zero position and pressure relief valve * Connectors, hoses, and pipes of the hydraulic system in NW 13 * Required oil consumption approx. 10 liters * Drum drive, motor-hydraulic, with oil motor, valves, and rubber-coated drive rollers (adjustable). Hydraulic speed regulator and brake for drum drive * Hydraulic pump unit with diesel engine and manual starter, 6.5 HP with gear pump (150 bar) * Pressure supply by switching the connection lines, either via truck hydraulics or the pump unit * Cover as weather protection, hot-dip galvanized without topcoat * Tires 315/80 R22.5 Subject to prior sale and errors! Sale exclusively subject to our general terms and conditions. Important note – Important information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it provides information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: used, maximum load weight: 33,500 kg, overall weight: 37,000 kg, axle configuration: 3 axles, first registration: 08/2011, next inspection (TÜV): 04/2027, loading space volume: 32 m³, Year of construction: 2011, Equipment: ABS, Stock No. 5867 31.5 m³ Feldbinder silo semi-trailer for powdery and granular goods / 1 compartment / aluminum rims ----* Manufacturer: Feldbinder * Type: FEUT 32.3 - Silo semi-trailer * First registration: 08/2011 * Gross vehicle weight: 37,000 kg Rcjdpfxo Afr S Ds Abueh * Unladen weight according to vehicle registration certificate: 3,500 kg * Payload: 33,500 kg * Suspension: Air suspension * Axles: 3 x BPW, with 1st axle as a lift axle / disc brakes * Tires: 385/55 R22.5, approximately 60% tread, on aluminum rims * Color: Chassis RAL 3002 chimney red, silo container RAL 1013 pearl white * Volume: 31.5 m³ / 1 compartment * TÜV (technical inspection): 04/2027 * EBS Wabco * 2 discharge cones DN800 * De-aeration mats * Pressure tank 2 bar * Operating temperature from -40 degrees to +80 degrees * 1 top manhole cover DN450, swiveling and foldable * Pinch valves * 4 inch central discharge to the rear * Access platform with walkway on the rear left, can be erected from above * Continuous mudguards * Aluminum air reservoir * LED work lights * LED reversing lights * Rear storage box * Loading pressure gauge * 3 hose pipe boxes on the right * Without supports German semi-trailer!! German documents!! Note regarding possible errors in the advertisement: Despite careful preparation of the advertisement, individual errors may have crept into the text or information. We assume no liability for errors, changes, or intermediate sales. All information is without guarantee. Please contact us to verify details or clarify further questions.