Used Pipe Line for sale (18,180)

Year of construction: 2011, condition: good (used), - Incl. extruder, corrugator, cutting saw, sliding saw, table, molds and die head / set Gedpfx Aeua E H Sob Ujuk - Suitable for single wall pipes up to 220mm

Condition: good (used), WEBER tube extrusion line including: WEBER DS 8.5 Elmepla saw Battenfeld R200/6 Battenfeld V125 Gusdpfxsvryhyj Ab Uok

Condition: excellent (used), Year of construction: 2005, pipe Ø 25 – 60 mm wall thickness 1 - 4 mm coil Ø max. 3.000 mm coil weight max. 10 t finish pipe length 3.600 - 8.500 mm round pipe Ø 26/28/30/32/36/38/40/44/46/48/52/54/56/60 mm speed max. 100 m/min working direction left → right The line consists of: decoiler crop shear welding table edge trimmer with scrap cutter Godpouc Shujfx Ab Usuk scrap conveyor strip edge preparation entry table forming part internal scraper/outer scraper cooling zone calibrating part testing and length measuring cutting ejector for reject pipes blow-off station oiling station bundle station banding station bundle extraction electrics

Year of construction: 1996, condition: excellent (used), The line is an original American-made line for upgrading sections of rollers for drawing profiles. The American-made line has a plate and a huge number of additional rollers for pulling pipes! - Year - 1996 - Line use pulsed TIG welding for argon blowing and it can be upgraded by laser and resistance. - Electric consumers 30 kW. - Profiles - stainless steel profiles ellipse, D profiles, hexagonal, square and rectangular pipes. Gjdpfxjh Ni Due Ab Usuk - In profiles of all dimensions from sheet metal width 125 mm and thickness 1 to 2.5 mm. - Speed - 30-90 m/h - Cutting unit - cross section by hand or with a band saw. - Line length 12 to 15 meters.

Year of construction: 2018, condition: excellent (used), The line is consisting of different producer : It is 2 layer , PE 100, pressure pipe production : 1. Three extruders (inner, outer layer and stripes) with automatic material loaders. Outer layer: LIANSU LSS 65/35, Main extruder , 350 kg/h,2018 Y Guedpfx Ajuuah Usb Uek Inner layer: LIANSU LSS 45/30, Co –extruder, max 40 kg/h, 2018 Y Stripes: co extruder 2. Extrusion die head complete with all necessary tools, die adaptors, heaters, for all dimensions 20-125mm. Lamellar calibrators up to Ø90mm, SDR 26, 17, 11, and with combinations can be produced SDR 9 and 7.4. Compete list with all tools (in attachments). 3. Vacuum tank, Periplast, year 2001, 6m length, with water-spey nozzles for cooling. 4. Additional cooling chamber, 6m length, Periplast , year 2001. 5. Unit for permanent and long term readable thermal marking, GNATA FILIPPO, Italy, type MAC 140/CCRC/AT-2. 6. Haul off, Liansu, ISPQ 110, year 2013.

Condition: ready for operation (used), functionality: fully functional, operating hours: 9,743 h, Complete pipe extrusion line for Double wall corrugated pipes – 150mm to 350m Material Dryer and loader– M+H Equipment, Germany Duo Extruder combination – Battenfeld 90/75 – Type PEX-1-75-30B Germany Special die head – DWP 270 – UC500 From 90mm ID to 270mm OD Special die head – DWP 630 – UC500 From 160mm ID to 500mm OD Unicor - Germany Corrugator – UC 500/40 Made in Germany Extrusion die and set of forming blocks – 1 set for DWC pipe ID 150mm, 200mm, 250mm, 300mm & 350mm Unicore - Germany Cooling Spray Bath – UCSB 500 Machine No Unicore, Germany Planetary Saw – SICA, Model – TRK/D/SY 10-500 Gusdpfsvztb Sox Ab Uek Tube Deposit Unit -500

Condition: excellent (used), Year of construction: 2012, section dimension max. 150 x 50 mm pipe Ø 50 – 150 mm wall thickness 1,5 - 5,5 mm reference material (tensile strength) 600 N/mm² coil Ø max. 2.100 mm coil weight max. 10 t finish pipe length max. 9.000 mm round pipe Ø according to list rectangular pipe according to list speed 100 m/min working direction left → right The line consists of: 1. entry part: double carousel decoiler coil opener/pinch roll unit/leveller crop shear strip tail end welding machine strip guide strip twister/pinch roll unit/strip accumulator entry strip accumulator edge trimming exit twister Gedpfjuc Sw Aex Ab Uouk 2. forming part: No. of horizontal stands: 4 No. of vertical stands: 3 3. welding part (HF) 4. calibrating part 5. separation 6. edge bevelling 7. blowing out 8. bundling 9. hydraulics 10. electrics

Condition: good (used), Year of construction: 1992, Manufacturer - ERW Year - 1992 Range of round pipe - 21 - 76 mm Range of square pipe - 20x20 - 60x60 mm Sheet thickness - 0,8 - 3,5 mm Speed - 60 m/min. Lenght of line - 50 m Gusdpfx Ajdlqkqeb Uok Tools : square pipes - 25,32,38mm round pipes - 40, 51 mm Welding power - 180 KW Anode voltage - 14 kv Anode dissipation - 70 kw Frequency - up to 30 Mhz

Condition: ready for operation (used), Year of construction: 2000, Line for the production of round tubes and closed profiles from black and stainless steel, with diameters ranging from 20.0 mm to 70.0 mm and wall thicknesses from 0.5 mm to 3.5 mm. Different diameter ranges are possible by manufacturing a suitable set of rollers. The tube or closed profile is formed by rolling the appropriately sized and thick steel strip using a roller set, then joined together by TIG welding. During production, the following processing steps are performed: a) grinding the weld seam b) calibration c) straightening d) and cutting to length The finished product, the 'raw tube', can be further processed to achieve the desired surface structure. Two main finishing processes are used: a) wet grinding using abrasive belts b) and/or dry polishing using polishing wheels and compounds. CONSTRUCTION The tube/profiling line features automatic TIG welding by SAF: a) Tricathode NERTAMATIC 300 TR TIG inverter, 2 units b) Tricathode NETRINOX TH 500 TIG inverter, 1 unit c) Welding of 0.5 – 1.5 mm wall thickness products using E16 torch d) Welding of 1.5 – 3.5 mm wall thickness products using E25 torch e) RETRISAF cooling system Gjdpfoxmiirjx Ab Ujuk 1.1 Steel strip coil support and decoiler 1.2 Roll forming stations a) entry station b) preliminary forming station c) main forming station 1.3 Welding segment – triple-electrode TIG welding heads with inert gas (argon) shielding 1.4 Weld seam cleaning station 1.5 Calibration station 1.6 Straightening station 1.7 Flying saw – product cutting to specified length Additional line components: 1.8 Bossi 4-head tube grinder Type: CPS 400x3000/4 Belt: 3000x150 mm 1.9 Bossi 2-head tube polisher Type: CP 400-2U

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 21400240015, REF: MM6226 1 x CEIA S.p.A. pipeline metal detector with rejector system into bin. Suitable for sauces, liquids, soups, etc. Technical specification ⚙️ ✅ Model - T/PLVMS21-50.  ✅ Serial number - 21400240015. ✅ Date of manufacture - 2014.  ✅ Pipe dimensions - 50mm diameter.  ✅ Electrical requirements - 100-240 V / 50-60 hz / 1 phase.  Guedpoxqmw Uofx Ab Uok

Condition: good (used), functionality: fully functional, Lubeca LW792 filler and LW303 seamer Diameter range: 50 - 160 mm Height range: 65 - 300 mm Production capacity: up to 70 c.p.m. Tooling for approx.: 160 x 90 mm Lubeca LW792 can filler Lubeca LW303 can seamer Gedpfx Abstqmwgs Uouk

Condition: excellent (used), Year of construction: 2017, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: no 1, total height: 2,000 mm, total width: 100 mm, total length: 8,000 mm, overall weight: 1,500 kg, year of last overhaul: 2022, high capacity, packing possible from both sides. 20 rolles of plastic will follow this machine Gedpfx Abox Dtgps Ujuk

Condition: ready for operation (used), total height: 1,350 mm, total length: 2,680 mm, total width: 2,350 mm, throat depth: 500 mm, empty load weight: 1,800 kg, Volledig automatische lintzaag met bundelklem en automatische invoer Gjdpfexbui Tsx Ab Ujuk CNC gestuurde hoekpositionering werkstukbreedte in bundelklem: 0-300 mm werkstukhoogte in bundelklem: 5-300 mm enkele materiaaltoevoerlengte: 0-600 mm herhaalde materiaaltoevoerlengte: 0-9999 mm maximale snijcapaciteit (90°, rond): 320 mm maximale snijcapaciteit (90°, rechthoek): 500 x 300 mm rechter versteksnede (45°, rond): 320 mm rechter versteksnede (45°, rechthoek): 310 x 310 mm rechter versteksnede (30°, rond): 200 mm rechter versteksnede (30°, rechthoek): 200 x 180 mm linker versteksnede (45°, rond): 320 mm linker versteksnede (45°, rechthoek): 300 x 230 mm Max height of workpiece: 325 mm Sawspeed: 18 > 115 m/min Length of band saw: 4200 x 34 x 1.1 mm

Condition: excellent (used), Year of construction: 2022, Multihead Weigher & Pouch Bag Filling / Sealing Line. Can mix three different products of different weights in the one pouch bag. Consisting of the following. 24 head weigher, sus304, 3-mix, 3 top cones, 100 degree flat chute, 2.5L dimple plate, touchscreen, photo sensor Pouch Machine Change Parts Gantry with stairs 3 infeed elevators Ice Viper Printer Set of wash walls to suit 2 x Cross feed conveyors All manuals and spare parts included Can be seen running In excellent condition Gujdpfxovw Egrs Ab Uok

Year of construction: 2025, condition: new, functionality: fully functional, High Speed · High Precision · High Stability The VS series high-speed laser tube cutter for small pipes has arrived! This machine features a high-precision chuck system designed specifically for tube cutting. With excellent sealing and dust protection, it delivers clamping accuracy within ≤0.1mm ideal for ultra-precise small tube processing. The chuck rotates up to 160 RPM, with acceleration reaching 1.5G, easily enabling high-efficiency processing of small-diameter tubes. Gedpfowwzudsx Ab Usuk easily enabling high-efficiency processing of small-diameter tubes. it supports true ultra-short tail cutting saving cost from the very beginning. Available in 3000W and 6000W, Handles square and round tubes from 10mm to 120mm in diameter, Also capable of cutting angle steel, channel steel, and I-beams A true all-rounder for small pipe fabrication. Supports automatic or semi-automatic loading Effortlessly enables smart and automated processing. One machine replaces three workers — A powerful and efficient tool for small pipe manufacturing!

Condition: used, Year of construction: 2017, operating hours: 49,000 h, functionality: fully functional, machine/vehicle number: 170015, Nitrogen generator model number Nitro -Gen 250. This generator is in operation and running 24 hours 5/6 days a week, it is in excellent condition and routinely serviced. It produces nitrogen gas at 99.5 to 99.9% purity with a flow rate of 40/55 M3/hour for packing food to MAP. requirements. Flow rate varies depending on the purity of Nitrogen required. It is estimated it will have a higher flow capacity than that quoted, but in it's present location is sufficient to supply our 4 production lines. There are also 2 buffer/storage tanks included as shown. In addition there is a 11Kw compressor that supplies the generator- if required. With the buffer tanks and compressor[if required] this is a complete working Nitrogen generation system. Gsdpfx Aexbta Dsb Ujuk Operation & installation Manual available. Documents -PDF with rating of this 250 model relative to different purity level settings The machine is for sale only due to expansion of the business resulting in additional new production lines requiring higher capacity equipment.

Condition: good (used), 1 x Carrot Line and Grader system Can also be used for potatoes, onions, beet root and brussel sprouts etc. System will be coming out of production end of May/early June. All equipment has had a full service and checked over during the spring period for the coming year. Haith Screen Bits Remover. The Screen Bit Remover continuously removes broken fragments of crop and debris from the produce flow. Carrots are transferred onto a traveling screen with a set size aperture. As the screen is conveyed forward, two full-width agitators gently move the crop causing any bits and debris to drop on to a waste conveyor below where the produce is taken over the end. The screen and agitator speeds are variably controlled individually to suit the various crop conditions. Grader / sorter Odenberg Titan 2 automatic camera grading system – installed in 2008. Titan 2 Sorter 6002.2, 3-way carrot sorter. The first sorter removes product that is not usable, damaged etc to the waste line. The second sorter removes short carrots, twisted and misshaped which are sent directly to the value tank. All the rejects go through the positive sorting area and the grading operative throws back any product that is fit for value sale. High capacity and low maintenance sorting machine Flexible sorting machine with gentle handling assured Quality control and feedback accessible through intuitive touch screen Consistent long-life accuracy. Grading Station. The grading operatives throw out any unusable product to the waste line via the positive grading area. Gjdpfx Ajv I S D Seb Ujuk Two to four graders can operate here depending on the quality of the produce. Wyma Lift Roller Sizing Grader – installed in 2019 The product is divided into five grades. 500g, 0-25mm, this goes to the value tank. 1kg, 25 – 42mm max. Loose min 30 – 45mm max. Lumpers, min 45mm upwards. Oversize. The Wyma Lift Roller Sizer is a diameter grader suitable for a wide range of fruits and vegetables including carrots, potatoes, parsnips, beets, citrus, onions, bulbs, brussel sprouts, rutabaga and other round or tubular products. It is extremely versatile, offering multiple size outputs at high capacity in one machine. It can cater for a large range of product sizes and shapes through a selection of different roller options. Product size ranges, or size bands, are created by adjusting the spacing between the rollers, at defined locations, along the length of the machine. The Lift Roller Sizer is made from stainless steel and food-grade plastic materials. Five Lift Roller Conveyors. All supporting framework available. *Video available on request* Located in Wexford, Ireland. Buyer to collect – machinery will be dismantled and loaded to your vehicle. UKFM2-6653

Year of construction: 2020, condition: used, Safe line metal detection belt Gujdjxc Iybopfx Ab Uek Metal detector opening 450mm x 100mm See our other listings VMA Wekerom

Condition: ready for operation (used), total height: 1,900 mm, total length: 1,250 mm, total width: 2,200 mm, empty load weight: 1,000 kg, nominal power: 3 kW (4.08 HP), Semi-automatische lintzaag Hydraulisch klemmen Normaal koelsysteem + verstuiveroptie Gujdpfx Asxcqixeb Usk Digitale uitlezing voor snijhoek Rollenbanen inbegrepen Depth of throat: 500 Max height of workpiece: 335 mm Sawspeed: 15 - 150 m/min Length of band saw: 4400 x 34 x 1,1 mm

Condition: refurbished (used), Complete cheese grating line for cheddar or Mozzarella cheese blocks. Cheese blocks are cubed and fed to the Cheese grater then up a conveyor dosed with powder and tumbled Gujdpfxsp T Tghs Ab Usk Arcall Cheese cutter, transfer conveyor, Urschel CC grater, incline conveyor and tumble mixing drum Can produce 1,000 Kg of grated cheese per hour. A Weigh bagging system can be added to the grated cheese line

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 1,500 W, positioning speed: 80 m/min, repeat accuracy: 0.03 mm, input frequency: 50 Hz, warranty duration: 24 months, working range: 6,000 mm, Equipment: cooling unit, safety light barrier, G-12A HIGH SPEED PROFESSIONAL TUBE LASER CUTTING MACHINE 1500-3000W The G series is equipped with many high-quality components with extreme performance and powerful cutting functions,suitable for tube cutting of various types and diameters ● The Highest Standards of Chucks in the Industry ● Two Methods for Fewer-tailing Cutting ● Variable Diameter Wheel Supporting ● Automatic Unloading Device ● Super Dust Removal System ● Patented Dust Baffle ● High-strength Cage Structure Welded Machine Bed Technical Parameter: Power: 1500W-3000W Maximum Tube Processing Size: 6000mm*φ120mm Max. Rotating Speed of Chucks: 160r/min X/Y-axis Positioning Accuracy≤0.05mm X/Y-axis Repositioning Accuracy≤±0.03mm Maximum positioning speed: 80m/min Max. Acceleration: 1.5G Round Tube Processing Dim: Φ10mm-Φ120mm Square Tube Processing Dim: 10mm*120mm Overall Dimensions: 9000mm*2700mm The Highest Standards of Chucks in the Industry The highest standards of chucks in the industry with strong clamping force, high rigidity, high speed, and stable performance Two Methods for Fewer-tailing Cutting Support two fewer-tailing cutting methods , choose one of them on the software interface according to different tube diameters Chuck double jaws: standard double jaws, small tube cutting precision is guaranteed Support: 2 sets of variable diameter wheel support standard (optional to increase to 3 sets)/optional servo support Unloading: [3M/4M] cylinder unloading rack/optional-[3M/4M] servo unloading rack/optional Loading: [Fully automatic loading rack/simple fully automatic loading rack/semi-automatic loading rack]/optional Gusdeuc Sifepfx Ab Ujk Dust removal: standard rear card hollow dust removal Short tail: chuck fixed, crossbeam fixed, short tail, front card open, rear card Continue to move forward, shorten the tail, ≥80 mm; if the short tail function is not used, the tail is about 200 mm Variable Diameter Wheel Supporting G Series has a wide range of cutting for various types and diameters of tubes, supported by the variable diameter wheel Automatic Unloading Device Efficient automatic unloading, saving time and labor costs, greatly improving production efficiency Super Dust Removal System The super dust removal system with ventilation design inside the chuck and the tube reduces the slag hanging in the tube, which is independently researched and developed by Glorystar Patented Dust Baffle Patented dust baffle protects important components from pollution and ensures stable performance High-strength Cage Structure Welded Machine Bed The industry’s highest-quality high strength cage structure welded machine bed with long life, anti-vibration, anti-torsion and anti-deformation

Condition: used, functionality: fully functional, Year of construction: 2018, Sandwich panel line, roof 30, 50, 80, 100 mm, wall 50, 80 mm, facade 50, 100 mm Guedpfx Aboxcinas Uek

Condition: used, Year of construction: 2010, functionality: fully functional, NP 687 | COMPLETE PET BOTTLING LINE SIDEL FOR CARBONATED DRINKS Product: Carbonated water and soft drinks Production speed: 13,500 bottles per hour (BPH) PET Preform Presses – Sameto - Model: EBH 2050 - Year: 2010 PET Blower – Sidel - Model: SBO10 - Year: 2010 - Neck finish: ø28 1881 - Number of cavities: 10 Air Conveyor – Alsim - Year: 1999 Monoblock – Alsim - Model: Asmojet 1T RV-P 48/60/10K - Year: 1999 - Rinser: 48 clamps, 1 water treatment - Filler: 60 isobaric valves - Capper: 10 heads Mixer – Alsim - Year: 1999 - Output: 30 m³/h Bottle Dryer – ACI - Year: 2015 Labeler – Krones Contiroll - Model: Contiroll - Year: 2004 - Type: Rotary labeler - Number of stations: 15 - Label type: PET wrap-around - Label feed: Roll-fed Shrink Wrapper – Acmi - Model: Fenix - Year: 2019 - Configuration: Film launching, film only Handle Applicator – Smipack - Model: HA 35-50-70 - Year: 2002 Palletizer – Alsim - Model: Valiant 1I 1P - Year: 1996 - Fully automatic, push-type system Pallet Wrapper – PM Pragometal - Model: OBS Rotomatic Standard Guedpfoxz Aytjx Ab Usk - Year: 2009

Condition: like new (used), Used Filling Line NP 657 | COMPLETE PET AXETIC BOTTLING LINE Year: 2011 Speed: 500 ml 30,000 bottles/hour 1000 ml 24,000 bottles/hour 1500 ml 18,500 bottles/hour Production: fruit juices and tea Filling method: aseptic, volumetric Filling temperature: 18-24°C Sizes: 500 ml, 1000 ml and 1500 ml Bottle type: PET bottles Stopper for bottle Standard 28 mm Product: still only Sterilization type: aseptic sterilization PET Blow Molding Machine Krones Contiform Series 3 Krones Aseptic Filling Monoblock Steriljet sterilizer Variojet Rinser Filling machine Capper Aseptic Ventilation Isolator VARIO DOS LIQUID ASEPTIC Hygiene Center Sterile Water Treatment AQUA ASEPT Bottle Coding Matrix Laser DDC3 Checkmat FM-X+L fill level sensor PCS process control system KZE product treatment (plate), sterile tank, rework container CIP-System cleaning system Condensate lifting system Guedpfxeuyhdvj Ab Ujk Krones Contiroll labeler Krones Variopac shrink wrapper Twin Pack handle applicator Krones Robobox Palletizer SYNCO Bottle Conveyor Belts

Condition: like new (used), Year of construction: 2004, functionality: fully functional, COMPLETE ASEPTIC TETRA PAK TBA LINE Year: 2004 Output speed: 8,000 packs/hour Filling machine: Tetra Pak model TBA/21 TPA 500 SO Packaging type: Tetra Brik Aseptic (TBA) Format: 500 ml Prisma Speed: up to 8,000 packs/hour Aseptic filling technology: Hydrogen peroxide sterilization Packaging material feed: Roll-fed carton Touchscreen operator panel Cap applicator: Tetra Pak model TETRA PAK APPLICATOR 45 Cap type: TwistCap or LightCap Cap application: Fully automated Hot melt glue system: Nordson Problue 4 Cap elevator: Tecno Vibrazioni Packing unit: Tetra Pak model TETRA CARDBOARD PACKER 70 Secondary packaging: Tray or box packing Godev Ay Uuepfx Ab Uouk Hot melt glue system: Nordson Problue 10 Inkjet coder: Videojet Coding type: Expiry dates, lot numbers Conveyor system: Total length approx. 65 meters