Used Transformer 200 Kva for sale (17,870)

Condition: ready for operation (used), Year of construction: 2002, operating hours: 74,523 h, functionality: fully functional, machine/vehicle number: 06800001121, rotational speed (max.): 6,000 rpm, spindle bore: 56 mm, spindle diameter: 90 mm, empty load weight: 6,000 kg, TECHNICAL DETAILS Travel, X-axis: 800 mm Travel, Z-axis: 300 mm Rapid traverse rate, X: 100 m/min Rapid traverse rate, Z: 45 m/min Chuck diameter: 200 mm Spindle head, flat flange: F140 h5 Spindle diameter at front bearing: 90 mm Spindle bore: 56 mm C-axis Speed range: 0–100 rpm Torque, holding torque brake: 240 Nm Accuracy in point positioning: < 0.02 degrees Nodjy T Id Dopfx Ahzoct Number of tool stations: 12 Cylindrical shank diameter: 40 mm Drive power, 40% duty cycle: 10.8 kW Torque: 28 Nm Speed: max. 6,000 rpm MACHINE DETAILS Power of the three-phase main drive: 25 kW Torque, 100% duty cycle: 160 Nm Speed range: 20–7,000 rpm Electrical data Power: 25/35 kW Voltage: 400 V / 50 Hz Control voltage: 24 V DC Hydraulics Total capacity: approx. 25 l Pressure: 80 bar Pressure for clamping device: max. 700 bar Coolant system Capacity: approx. 190 l Pump power: 1.7 kW Flow rate at 6 bar: 20 l/min Weight: approx. 6,000 kg Operating hours: 74,523 h Note: The machine is sold including a small set of accessories!

Condition: ready for operation (used), Year of construction: 2002, operating hours: 77,119 h, functionality: fully functional, machine/vehicle number: 06810000041, rotational speed (max.): 6,000 rpm, spindle bore: 56 mm, spindle diameter: 90 mm, empty load weight: 6,000 kg, TECHNICAL DETAILS Travel X-axis: 800 mm Travel Z-axis: 300 mm Rapid traverse rate X: 100 m/min Rapid traverse rate Z: 45 m/min Chuck diameter: 200 mm Spindle head, flat flange: F140 h5 Spindle diameter at front bearing: 90 mm Spindle bore: 56 mm C-axis Speed range: 0–100 rpm Torque, holding torque brake: 240 Nm Accuracy at point positioning: < 0.02 degrees Number of tool stations: 12 Cylindrical shank diameter: 40 mm Drive power, 40% duty cycle: 10.8 kW Torque: 28 Nm Speed: max. 6,000 rpm MACHINE DETAILS Power of the three-phase main drive: 25 kW Torque, 100% duty cycle: 160 Nm Speed range: 20–7,000 rpm Electrical data Power: 25/35 kW Voltage: 400 V / 50 Hz Control voltage: 24 V DC Hydraulics Total capacity: approx. 25 l Njdpfxey T Iddo Ahzjct Pressure: 80 bar Pressure for clamping device: max. 700 bar Coolant system Capacity: approx. 190 l Pump power: 1.7 kW Flow rate at 6 bar: 20 l/min Weight: approx. 6,000 kg Operating hours: 77,119 h Note: The machine is sold including a small set of accessories!

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, operating hours: 7,610 h, input voltage: 400 V, input current: 10 A, total height: 1,650 mm, total length: 4,400 mm, total width: 1,000 mm, TECHNICAL DETAILS Overall height: 1,650 mm Overall length: 4,400 mm Overall width: 1,000 mm Color: Gray Operating hours: 7,610 MACHINE DETAILS Weight: 2,500 kg Year of manufacture: 2018 Documentation available: No CE marking present: Yes CE certificate available: No Serial number: Itsbn Dztwjy Ewv Tj Tsg Voltage: 400 V Power consumption: 10.3 A Fuse: 16 A Transport dimensions: 4,400 mm x 1,000 mm x 1,650 mm (l x w x h) Transport weight: 2,500 kg Transport packages: 1 EQUIPMENT Pre-milling unit Gluing unit Pressure rollers Cutting unit Njdey Tnuvspfx Ahzoct Rough milling unit Radius pulling unit Corner rounding unit Surface pulling unit Brushing unit

Condition: used, Year of construction: 1998, MORI SEIKI SL-200 SMC, 4- AXIS TURN MILL CENTRE MAKE MORI SEIKI, MADE IN JAPAN MODEL SL-200 SMC YEAR 1998 CONTROL FANUC MSD- 518 (18-T) MAX. TURNING DIA. 390mm MAX. TURNING LENGT 507mm SWING OVER BED 680mm OVER CROSS SLIDE 510mm BAR WORK CAPACITY 51.0mm MAX. SPINDLE SPEED 0--4000rpm TURRET 12 stations, ALL DRIVEN stations TAILSTOCK YES SPINDLE BORE 65mm POWER TOOL SPEED (C-AXIS) 67- 3000rpm SPINDLE NOSE A8 (TBC) RAPID TRAVERSE RATE X: 18,000mm/min & / Z: 24,000mm/min ELECTRICAL POWER SUPPLY 37.9kVA MACHINE FLOOR SPACE 2650.0 X 1900.0 mm MASS OF MACHINE 4500 KGS PLUS 4- AXIS MACHINE SUB SPINDLE RENISHAW TOOL SETTING PROBE SWARF CONVEYOR Nsdpfstt Da Ijx Ahzjct GOOD RANGE OF TOOLING MACHINE MANUALS SWARF BIN MIST EXTRACTOR VERY CLEAN

Condition: used, Year of construction: 1998, functionality: unexamined, 1ST MACHINE TOSH S.R.L. TOSH LOGICA 200 Industrial Pad Printing Machine – 1998 Heavy-duty industrial pad printing machine manufactured by TOSH S.R.L. Italy, designed for precision multi-application tampography and industrial component printing. The LOGICA 200 is a larger-format automated pad printing system suitable for demanding production environments requiring accurate and repeatable print registration across industrial products and components. Machine Details Manufacturer: TOSH S.R.L. – Italy Model: LOGICA 200 Year of Manufacture: 1998 Serial Number: 07980248 CE Marked Industrial pneumatic/electronic operation Features Large-format pad printing system Enclosed guarded print area Heavy-duty industrial construction Integrated electronic controls Precision shuttle/work table Pneumatic print head operation Adjustable tooling/fixture platform Industrial production capability Applications Ideal for: Automotive component printing Industrial product branding Promotional product manufacturing Electronics housings Plastic moulded parts Technical component marking High-volume tampography operations Condition Used industrial condition with cosmetic signs of workshop use and age-related wear. Machine removed from working production environment. Electronics and control boards remain installed. Included TOSH LOGICA 200 machine Installed control system Integrated work table/shuttle assembly Safety guarding Components and fittings shown in photographs Ncedjy Shxfspfx Ahzjt Shipping & Inspection Loading assistance available. Inspection welcome by appointment. Worldwide shipping can be arranged at buyer’s cost 2ND MACHINE Kent Pad Printer Canada Inc. KENT Pad Printer – Industrial Pneumatic Pad Printing Machine Industrial pad printing machine manufactured by Kent Pad Printer Canada Inc., suitable for precision tampography and component marking applications. Compact and robust pneumatic-operated system designed for reliable industrial printing onto plastics, metals, promotional products and engineered components. Machine Details Manufacturer: Kent Pad Printer Canada Inc. Machine Type: Pad Printer Voltage: 230V / 50–60Hz Power: 30W CE Marked Pneumatic operation Bench/floor mounted industrial unit Features Industrial pad printing system Adjustable print table/work platform Pneumatic print head operation Safety guarding installed Electronic control interface Compact production footprint Heavy-duty cast construction Suitable for repetitive production work Applications Ideal for: Promotional product printing Plastic component marking Automotive parts printing Electronics branding Industrial product coding Small parts tampography Batch production environments Condition Used industrial condition with visible cosmetic wear from workshop use. Machine appears complete with controls, guarding and pneumatic components installed. Included Kent pad printing machine Installed control panel/interface Adjustable work table Safety guards Foot pedal/control accessories shown Components visible in photographs Shipping & Inspection Inspection welcome by appointment. Loading assistance available. Worldwide shipping can be arranged at buyer’s expense.

Condition: good (used), Manufacturer: Doebeli Ncsdpfx Aoxal Ikjhzot Model: DPA 200 Condition: Used

Condition: used, all stainless steel twin shaft paddle mixer intermeshing mixer Ncsdpfxjy Tupmo Ahzst useful content : 2.000 L dimensions (l x w x h) : ± 4.100 x 1.500 x 2.700 mm 1 front discharge guard 18 kW

Condition: excellent (used), LDS Dactron COMET USB Shaker Control System Type: COM 200 Manufacturer: Brüel & Kjaer / LDS Dactron For sale is a used LDS Dactron COMET USB Shaker Control System, Type COM 200, for controlling electrodynamic vibration testing systems. The system is suitable for random, sine, and shock tests in laboratories, industrial settings, automotive applications, as well as research and development. Manufacturer / Model Manufacturer: LDS Dactron / Brüel & Kjaer Type: COMET USB Model: COM 200 Serial Number: 11303191 Made in U.S.A. Technical Data 2-channel shaker control system USB interface Supply voltage: 100 – 240 V Frequency: 47 – 63 Hz Current consumption: 0.5 A Suitable for: Random tests Swept sine tests Shock tests Electrodynamic vibration testing systems Software / Functions Installed software according to system display: Shaker Control Version 8.1001 Library Version 6.3120 Unlocked module: Value Swept Sine Activated option: Real Time Data Exchange Ncedpfx Ahoy Ugrpezet Connections USB port BNC connectors Power connection Further connections, see images Calibration Calibration data according to label: Calibration Date: 2010-09-21 Due Date: 2011-09-21 The calibration has expired. A new calibration can be performed by the buyer if required. Condition Used equipment from an industrial application. Optical condition, see images. Normal signs of use and storage are present. The device was switched on. The indicator light and software display are active. Further functional or calibration tests have not been performed. Scope of delivery LDS Dactron COMET USB COM 200 controller Power cable / connection cable according to images Accessories according to images Scope of delivery includes only the items shown in the images. Notes Inspection possible by arrangement. Loading and shipping possible by arrangement. Commercial sale without warranty. Subject to changes, errors and prior sale.

Condition: good (used), Year of construction: 1997, Compressor Kaeser DS 200 Year : 1997 110 kw Block visc changé à 44 000 heures Number of hours in charge : 2 500 hours Ncodpfx Ahepgv Uzozjt

Condition: excellent (used), AREVA 400 kVA electrical transformer station with main low-voltage switchboard (TGBT) Year 2006 Njdpfx Aeyr Aflehzjct

Condition: used, twin shaft paddle mixer mixer capacity 1.250 L. 200 mm – head with tool trolley all stainless steel dimensions mixer (l x w x h) : ± 2.350 x 2.000 x 2.600 mm Njdey Sz Imopfx Ahzjct loading height : 2.200mm pneumatic lid

Condition: new, new ! all stainless steel closed lid with seal 2 mixing directions (manual or automatic) tiltable CE-approved Ncedpfjy Sz Iaex Ahzot power : 2,2 kW overall dimensions (l x w x h) : ± 1.300 x 600 x 1.300 mm The Barmix 200 liter paddle mixer is an ideal machine for mixing all types of food products within the meat, poultry, fish, vegetables, dairy, cereal, confectionery, petfood and sandwich filling industry. Mixing for meat and vegetarian burgers, sausages, meatballs, coleslaw, potato salad and other wet salads, mash potato, vegetables fresh and frozen, cereals, raw petfood Also suitable for dry products, such as herbs, ingredients, powders, granules, nuts, grains, seeds, kernels, dried fruit, Granola, etc.

Condition: used, Year of construction: 2016, Type: KMRS-200 Serial number: 17508-001 Year of construction: 2016 Capacity: 700 pc/h Nodjypbzajpfx Ahzjct Belt width: 325 mm Diameter cutting ring: 270 mm CIP unit: hot water min. 60 degrees Celsius Compressed air: 5 Bar, 3.5 Nm³/h Power: 3 x 400V, 50Hz, 2kW Dimensions: 1600 x 1150 x 1500 mm

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,000 kg, oil tank capacity: 3,100 l, empty load weight: 50,800 kg, year of last overhaul: 2025, volume flow: 795 m³/h, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Njdpfx Ahoy S Rruszjct Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: excellent (used), Brüel & Kjaer LDS Dactron Laser USB LAS 200 Type: LAS 200 LDS Dactron Vibration Testing and Shaker Control System including Acer laptop with installed software For sale is a used LDS Dactron LASER USB Shaker Control System, Type LAS 200. The system was last used in an industrial vibration testing facility and is suitable for electrodynamic shaker systems, vibration tests, resonance tests, random tests, and shock tests. Manufacturer / Model Manufacturer: LDS Dactron / Brüel & Kjær Type: LASER USB Model: LAS 200 Made in U.S.A. Ncedpfxoy T Iv Hj Ahzst Software / Functions Installed software: Shaker Control Version 8.1001 Library Version 6.3120 Activated modules according to software display: Random Sine on Random Random on Random Swept Sine Resonance Search, Track and Dwell Sine Oscillator Classical Shock Shock Response Spectrum Long Time History Further activated options: Automatic Drive Notching / Limiting Real Time Data Exchange High Frequency Control Amplifier Controller Technical Data 8 active input channels 2 output channels Sampling Rate: 96 kHz A/D Resolution: 24 Bit USB Mode: 2.0 Input Type: Volt / ICP / TEDS Suitable for electrodynamic vibration testing systems and industrial shaker systems. Calibration Calibration data according to system display: Last calibration: 09/20/2023 Displayed due date: 09/19/2024 Dimensions / Weight Controller approx.: 430 x 350 x 90 mm (W x D x H) Controller weight: approx. 6 - 8 kg Scope of supply LDS Dactron LASER USB Controller Acer laptop with installed software Connection cables / accessories as shown in the pictures Condition Used equipment from industrial use. Optical condition see pictures. Normal signs of wear and tear and storage. System starts, software can be opened and the hardware has been recognized. No further tests were performed. Notes Sale exclusively to commercial customers. No guarantee or warranty. Subject to prior sale, errors and changes. We will be happy to answer any further questions by telephone or message.

Condition: new, Gero F 100-200/12SO high temperature furnace 201101895 - 30 - 3000°C / Cable length green: 3.9 m, connection cable: 3.00 m, used, good condition, 100% functional, scope of delivery as per photos Nsdpfx Ajx Erpnohzsct

Condition: good (used), Barrel lifter, barrel handling, barrel gripper, barrel lifter, barrel handling, barrel gripper -Drum lifter with: gripper head -Load capacity: kg Ncsdpfx Aod Aghkjhzjt -Suitable for: 1 x 200-L steel bung drums, steel lid drums, rolling hoop drums -Reception: 410 mm -Automatic opening when: setting down the barrels -Number: 2x grippers available -Price: per piece -Dimensions: 340/305/H900 mm -Weight: 47 kg

Condition: good (used), Short-stroke heavy-duty cylinders, high-pressure hydraulics, compact cylinders, light alloy cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders, lifting cylinders -Hydraulic cylinder: Lifting cylinder BVS 277 Ncjdpshmc A Ajfx Ahzjt -Stroke travel: 200 mm -Piston: Ø 110 mm -Number: 2 x cylinders available -Price: per piece -Dimensions: Ø 160 x 380 mm -Weight: 26.3 kg/pc.

Condition: good (used), Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, extraction blower, radial fan, ventilation fan, radial blower, blower, fan Ncsdpfx Ahjy Tt Ihozst -Fan: Blower, radial fan -Type: 2-stage -Motor: ASEA 0.4/0.1 kW 1390/690 rpm -Fan wheel: 2x Ø 200 x 80 mm -Inlet connection: Ø 160 mm -Output connection: 190 x 180 mm -Dimensions: 815/590/H400 mm -Weight: 33 kg

Condition: good (used), Year of construction: 2000, operating hours: 28,155 h, functionality: fully functional, Baler Paal Konti 200 D, Year of Manufacture 2000 Technical Data: Manufacturer: Paal Model: Paal Konti 200 D Year of manufacture: 2000 Operating hours: 28,155 Pressing force: 60 t Drive power: 45 kW Total connected load: 60 kW Feed opening: 1020 x 1400 mm Bale dimensions: 750 x 1100 mm, length variable Tying: 4-fold automatic Throughput performance at: 35 kg/m³ approx. 9.5 t/h 60 kg/m³ approx. 16.5 t/h 100 kg/m³ approx. 26 t/h Bale weight: 450 to 650 kg Transport dimensions: approx. 10,123 x 2,152 x 2,720 mm (LxWxH) Machine weight: approx. 15,000 kg Ncjdpfxeyz R Uue Ahzst Materials: Paper, Cardboard, Film The baler is in good condition and has been checked and tested. A video is available on our website or YouTube channel. Complete documentation is available. Please note: All technical data is based on manufacturer’s information. No liability is accepted for the data provided or for potential errors. The offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by appointment. Sale is ex works, advance payment only, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2013, operating hours: 11,000 h, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 435 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 54 kVA, torque: 117 Nm, controller manufacturer: Fanuc, controller model: i Series, workpiece height (max.): 200 mm, workpiece diameter (max.): 300 mm, total height: 300 mm, total length: 2,465 mm, total width: 2,835 mm, table width: 200 mm, table load: 60 kg, rotary table diameter: 200 mm, overall weight: 5,500 kg, spindle speed (min.): 120 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 11,000 h, coolant supply: 20 bar, spindle nose: DIN40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 125 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 2013 Doosan DNM 200/5AX 5 Axis CNC Machining Centre Used 2013 Doosan DNM 200/5AX (4+1) 5-axis CNC machining centre with Fanuc i Series control, probe, tool holders, spindle chiller, transformer, swarf conveyor and only 11,000 run time hours. Manufacturer: Doosan Ncedpfx Ahsy St Sdezet Model: DNM200/5AX Machine Type: 5 Axis (4+1) Machining Centre Year: 2013 Control: Fanuc Series i Control Hours: 11,000 Run Time Hours Machine Description 2013 Doosan DNM 200/5AX CNC Machining Centre, a compact, high-performance 4+1 - 5-axis vertical machining centre ideal for precision engineering, toolmaking, aerospace, medical, motorsport, mould and die, and complex component machining. This machine is fitted with a Fanuc i Series CNC control and has only 11,000 run time hours, making it an excellent opportunity for manufacturers looking for a reliable used 5-axis machining centre with strong capability, premium features and valuable accessories included. The Doosan DNM 200/5AX is well known for combining compact footprint, rigid construction and 5-axis positioning. It is ideal for reducing setups, machining complex parts and increasing productivity compared with conventional 3-axis machining. Key Features 2013 Doosan DNM 200/5AX 4+1 5 Axis CNC Machining Centre Fanuc i Series Control Only 11,000 Run Time Hours Includes Renishaw OMP60 probe Includes tool holders Includes spindle chiller Includes transformer Includes swarf conveyor Compact 5-axis machining solution Ideal for complex component machining Technical Specifications X Axis Travel: 400 mm Y Axis Travel: 435 mm Z Axis Travel: 500 mm A Axis Travel: 150 Deg (+30 to -120Deg) C Axis Travel: 360 Deg Table Diameter: 200 mm Max Load on Table: 60 kg Max Workpiece: 300mm Dia x 200mm High Spindle Speed: 12,000 rpm Spindle Taper: DIN40 Pullstud: Nikken PS-806 Tool Capacity: 30 Station ATC Rapid traverse (X, Y): 36000mm/min Rapid traverse (Z): 30000mm/min Rapid traverse: (A - tilt axis) 20 rpm Rapid traverse: (C – rotary axis) 30 rpm Maximum feedrate: (X, Y, Z) 15000mm/min Maximum feedrate: (A, C) 7200 deg/min Feedback system: Absolute encoder Max Tool Diameter: 125mm Max Tool Length: 300mm Max Tool Weight: 8kg Spindle motor AC: 11/18.5kW Axis motor (XYZ): AC 4.0kW Axis motor (A axis): AC 3.0kW Axis motor (C axis): AC 1.6kW Power Requirements: 54.0 kVA Air Pressure: 6kgf/cm2 Machine Dimensions: 2465 x 2835 x 3091mm Approx. Machine Weight: 5,500 kg Run Time Hours: Approx. 11,000 hours Included With This Machine Renishaw OMP60 Probe Tool holders Spindle chiller Transformer Swarf conveyor Fanuc i Series CNC control Why Buy This Doosan DNM 200/5AX? This machine is a strong choice for companies searching for a used 5 axis CNC machining centre, used Doosan machining centre, Doosan DNM 200/5AX for sale, or compact 5-axis vertical machining centre. The 4+1 machining capability allows users to machine multiple faces of a component in fewer setups, helping to reduce handling time and increase production efficiency. With a compact table, high spindle speed and Fanuc control, this machine is particularly suited to small to medium batch production and complex prismatic parts. Applications This Doosan DNM 200/5AX is suitable for: Aerospace components Medical components Motorsport parts Toolroom machining Mould and die work General subcontract machining Complex 4+1 machining Notes: *Specifications are given in good faith but not guaranteed*

Condition: new, Year of construction: 2026, machine/vehicle number: 282285, fuel type: diesel, motor manufacturer: Yanmar 4TNV98C, General information Field of application: Construction Weights Empty weight: 570 kg Ncodpfxey T Uxbe Ahzot Functional Generator capacity: 33 kVA Dimensions of cargo space: 210 x 87 x 117 cm CE mark: yes Other information Fuel consumption: 5,2 Liter/Hour at 75% Load Generator: Leroy Somer TAL-042C Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 70 l Production country: IT Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2025, machine/vehicle number: E25H033153, fuel type: diesel, motor manufacturer: Cummins QSK50-G17, General information Field of application: Construction Weights Empty weight: 12.350 kg Functional Generator capacity: 2.250 kVA Dimensions of cargo space: 586 x 225 x 252 cm CE mark: yes Other information Fuel consumption: 406 Liter/hour at 100% load Generator: Stamford S7L1D-H41 Frequency: 50 Voltage: 400 Nedpoy T Uw Dofx Ahzoct Drill equipment: Battery, Control Panel Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel = Remarks = Warranty: 1 year for continuous use 2 years for standby use

Condition: new, Year of construction: 2026, fuel type: diesel, motor manufacturer: Cummins KTA38-G2, General information Field of application: Construction Weights Ncjdpfx Ahjy T Uwqezjt Empty weight: 13.910 kg Functional Generator capacity: 1.100 kVA Dimensions of cargo space: 606 x 245 x 290 cm Other information Fuel consumption: 128 Liter per Hour at 75% Load at 50Hz Generator: Stamford S6L1D-E41 Frequency: 50/60 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1200 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = Switchable 50Hz and 60Hz Standby power: 1125kVA at 60Hz, 1000kVA at 50Hz

Condition: used, Year of construction: 1999, plate thickness 4 mm plate length 200 mm total power requirement 3 kW weight of the machine ca. 550 kg Ncjdpfoy Tif Aox Ahzst dimensions of the machine ca. 1,0 x 0,8 x 1,0 m