Used Trim Saw for sale (7,802)

Condition: good (used), Year of construction: 2001, Semi-automatic Bomar STG 330 DGH saw - Cutting dimensions: 330mm x 510mm Bodpfx Abozur Duj Dowt - 60-degree mitre cut - Variable cutting speed - Year of manufacture: 2001

Condition: excellent (used), CATALOGUE NUMBER 7958 TECHNICAL DATA - Maximum cutting height: 120mm - Shaft width: 510mm - Shaft diameter: 75mm - Maximum sawblade diameter: 400mm – From above: - 2 rows of anti-kickback fingers - toothed feed roller - toothed outfeed roller – From below: - anti-kickback fingers - 2 toothed feed rollers - arbor with sawblade - toothed outfeed roller - 6 feed speeds - Hydraulic motor (for extension, feed, rollers): 3kW - Main motor: 22kW - Infinitely variable feed speed - Control stand dimensions: 700x600x1000mm - Overall dimensions (L/W/H): 2300x1450x1600mm - Weight approx. 2650kg ADVANTAGES – Turkish production – Robust construction – Used machine, in very good condition Net price: 37,900 PLN Net price: 9,020 EUR depending on the exchange rate of 4.2 EUR Bodpfx Aezxrd Nob Dowt (Prices may change with significant fluctuations)

Condition: excellent (used), Catalog number: 8056 TECHNICAL DATA - max. disc diameter: 350 mm - disc bore diameter: 30 mm - disc guard - cutting height for a 300 mm disc: 90 mm - max. cutting width: 640 mm - ability to cut at an angle in the vertical plane, by adjusting the arm or the disc - arm rotation: right/left - motor: 400 V, 3 kW - table dimensions: 1000 x 800 mm - dust extraction port diameter: 50 mm - dimensions (L/W/H): 1800 x 1100 x 1510 mm - weight: 185 kg ADVANTAGES - Made in Italy - DTR documentation included - Very good condition - Used saw Net price: 7500 PLN Net price: 1786 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to larger fluctuations) Bwjdpfeznkz Eex Ab Dst

Condition: new, total height: 1,700 mm, total length: 2,000 mm, total width: 1,480 mm, Equipment: documentation/manual, Semi-Automatic Band Saw Machine Saw blade size 2910 x 27 x 0,9 mm Cutting speeds 20 - 120 m/min Cutting capacity 0° round Ø258 mm Cutting capacity 0° square 250x250 mm Cutting capacity 0° rectangular 320x100 mm Cutting capacity 45° round 210Ø Cutting capacity: 45° square 195x195 mm Cutting capacity: 45° rectangular, 210x100 mm Cutting capacity 60° round 135Ø Cutting capacity 60° square 110x110 mm Cutting capacity 60° rectangular 135 x 100 mm Cutting capacity -45° round 185Ø Cutting capacity -45° square 170x170 mm Cutting capacity -45° rectangular 195x100 mm Weight 390 kg Bedpszquywsfx Ab Djwt If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2012, machine/vehicle number: 0102-260024, The Behringer HBP 313N is a horizontal, double-column bandsaw for industrial metalworking. It is used for the precise cutting of solid materials, pipes, and profiles. Its robust design and continuously adjustable cutting speed make it suitable for use in both single-piece and series production. The machine has a working area of Ø 310 mm for round materials and 500 × 300 mm for flat materials. The cutting speed is adjustable between 20 and 140 m/min. A coolant system with a 60-liter capacity ensures good cooling and a long service life for the saw blade. Bsdpszq S Hnsfx Ab Dswt The machine is powered by a 4.0 kW saw motor. The electrical connection is 400 V / 50 Hz, and the control system operates at 24 V DC. With a machine weight of 1,960 kg, the HBP 313N offers high stability and ensures precise machining of metal materials. Technical specifications: Saw blade dimensions 5,000 x 34 x 1.1 mm Working area Ø 310 mm / 500 × 300 mm Cutting speed 20–140 m/min Coolant 60 l Belt tension 60 bar Saw motor 4.0 kW Connected load approx. 7 kW Mains connection 400 V, 50 Hz Control voltage 24 V DC Machine weight 1,960 kg Material support height 800 mm

Condition: used, Year of construction: 2005, machine/vehicle number: 0102-260023, The Behringer HBP 313 is a horizontal, double-column band saw for industrial metalworking. It is used for the precise cutting of solid materials, tubes, and profiles. Its robust design and continuously adjustable cutting speed make it suitable for both single-piece and series production. The machine has a working area of Ø 310 mm for round materials and 500 × 300 mm for flat materials. The cutting speed is continuously adjustable from 20 to 140 m/min. A coolant system with a 60-liter capacity and a band tension of 60 bar ensure high cutting quality and a long service life of the saw blade. The machine is powered by a 4.0 kW sawing motor. The electrical connection is 400 V / 50 Hz, and the control system operates with 24 V DC. With a weight of 1,960 kg, the HBP 313 ensures low-vibration operation and high processing accuracy. Technical data Working area Ø 310 mm / 500 × 300 mm Smallest material dimensions Ø 10 mm / 10 × 8 mm Smallest section length 8 mm Remaining piece length from 10 mm Cutting speed 20–140 m/min Coolant 60 l Band tension 60 bar Sawing motor 4.0 kW Hydraulic motor 1.5 kW Coolant pump 0.12 kW Chip conveyor 0.09 kW Connected load approx. 7 kW Mains connection 400 V / 50 Hz Bwsdpszq S Ilofx Ab Dst Control voltage 24 V DC Current consumption approx. 14 A Fuse rating 25 A Machine weight 1,960 kg Material support height 800 mm

Condition: used, Year of construction: 1998, machine/vehicle number: 0102-260022, The Behringer HBP 430N is a horizontal, double-column bandsaw designed for professional use in metalworking. It is suitable for precisely cutting solid materials, pipes, and profiles and impresses with its robust construction and high cutting accuracy. The machine is designed for straight cuts; depending on the configuration, miter cuts up to 45° are also possible. With a cutting range of Ø 430 mm or 600 × 430 mm and a continuously variable cutting speed of 17 to 110 m/min, it can be used in a variety of applications. The powerful 7.5 kW sawing motor, hydraulic workpiece clamping, and coolant system with 150 liters ensure reliable and economical operation. With a machine weight of 2,100 kg, the HBP 430N offers high stability and is ideal for daily use in metalworking, steel construction, and mechanical engineering companies. Technical Data HBP 430 N Working range 90° round Ø 430 mm Working range 90° flat 600 × 430 mm Working range 45° flat 320 × 430 mm Smallest material dimension 15 mm / 10 × 15 mm Smallest section length 10 mm Remaining piece length approx. 40 mm Cutting speed 17–110 m/min Bedpfxszq S Ncj Ab Dewt Coolant tank 150 l Belt tension 80 bar Sawing motor 7.5 kW Hydraulic motor 2.2 kW Coolant pump 0.12 kW Chip conveyor 0.09 kW Connected load approx. 11 kW Mains connection 400 V / 50 Hz Control voltage 24 V DC Current consumption approx. 22 A Fuse 35 A Cable cross-section min. 4 × 6 mm² Saw band dimension 5,800 × 54 × 1.3 mm Machine weight 2,100 kg Material support height 700 mm

Condition: used, Year of construction: 1991, Used Machine Year of Manufacture: 1991 Features and Technical Specifications: Bwodpfozk Nx Iox Ab Dot - Fully automatic, floor-standing - Cutting area: 5,300 x 2,200 mm - Saw blade diameter: 300 mm - Control system for vertical and horizontal cuts - With aluminum folding stops and aluminum center support - With SUPER-CUT scoring device - Motor: 3 kW - 400 V Availability: available shortly Location: 63934 Röllbach

Condition: good (used), Storage location: 3137 Manufacturer: Königsee Bsdozx D T Nspfx Ab Dswt Year of manufacture: 1984 Machine number: 012/84 Type / Model: SWSK 400 Control: conventional Saw blade diameter: 20 to 400 mm Grinding wheel diameter: max. 200 mm Grinding wheel width: Grinding wheel bore: Tooth pitch: up to 24 Number of teeth: Spindle speed: 3,340 / 4,175 rpm Power connection: 2 kW Accessories/Equipment: Condition: good Weight: 0.5 t Dimensions: 600 x 700 x 1,200 mm

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 423.03.394.09, cutting height (max.): 104 mm, saw blade diameter: 315 mm, total width: 1,160 mm, total length: 1,470 mm, total height: 1,200 mm, overall weight: 570 kg, table length: 1,300 mm, spindle speed (max.): 16,000 rpm, spindle speed (min.): 1,500 rpm, input voltage: 400 V, For sale: a Felder KF 700, almost unused. Saw-milling combination, year of manufacture 2009. Milling head can be swivelled 90°-45° Quick-change system for milling spindle Milling fence '240' Milling table opening: 230 mm Saw can be swivelled: 90°-45° Bwsdpfozxpahsx Ab Dot Aluminum sliding table X-Roll with precision guides Cutting width: 800-1250 mm Cutting height: 104 mm with a saw blade diameter of 315 mm Cutting length: 1300 - 2500 mm Includes quick-change system for milling spindle and an additional spindle. Additional table extension and saw blades are also included. The machine can be inspected and tested at our location in Chemnitz.

Condition: excellent (used), CATALOG NUMBER 6650 TECHNICAL DATA - Max cutting height: 200 mm - Track width: 450 mm - Shaft width: 450 mm - Blade bore diameter: 80 mm - Shaft diameter: 60 mm - Min. blade diameter: 250 mm - Max. blade diameter: 350 mm - Max. width of cant: 870 mm - Min. length of cant: 1500 mm From above: - Pawls - Feed shaft, toothed, metal - Pawls - Feed shaft, toothed, metal - Pressure unit - Shaft with saw blades - 2 feed shafts, metal, pneumatically pressed From below: - Guide - Metal sliding roller - Pawls - Track - Shaft with saw blades - Track - Stepless feed speed adjustment via inverter 4-40 m/min - Main motors: 2 x 75 kW - Feed motor: 3 kW - Electric vertical movement of body up/down: 0.55 kW - Electric adjustment of saw blade shafts: 2 x 0.25 kW - Central lubrication - Extraction nozzle diameter: 2 x 300 mm - Dimensions (L/W/H): 3100 x 2600 x 2000 mm - Weight: approx. 6500 kg - Centering device included - Toothed feed rollers: 3 pcs - Smooth feed rollers: 8 pcs - Motor: 2 x 1.5 kW - Pneumatic top pressure - Side pressure - Dimensions (L/W/H): 4850 x 1100 x 1800 mm - Weight: approx. 1000 kg ADVANTAGES – Czech manufacture – Double-shaft design – Centering device Bsdpfx Aszxqvdeb Dowt – DTR documentation – Year of manufacture: 2010 – Used multi-blade saw, in very good condition Net price: 262,900 PLN Net price: 62,600 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (in case of significant currency fluctuations, the price may change)

Condition: good (used), Workpiece width: 1,200 mm Workpiece height: 500 mm Drill diameter: 8 - 40 mm Number of drilling spindles: 3 pcs. Bwodpfx Ajzxqxxob Djt Spindle speed: 150 - 1,100 rpm Tool changer: 15 pcs Saw blade diameter: 1,430 mm Cutting speed: 8 - 30 m/min Total power requirement: 43 kW Machine weight approx.: 20 t Space requirement approx.: m Additional information Working range Angle steel: 80 × 65 × 10 mm to 250 × 250 × 28 mm U-steel: 80 × 45 mm to 400 × 110 mm Double-T beams: 80 × 46 mm to 600 × 220 mm Wide flange beams: 100 × 100 mm to 1,008 × 302 mm Special wide flange beams / welded T-beams: up to 1,200 × 500 mm Workpiece data Workpiece width max.: 1,200 mm Workpiece height max.: 500 mm Drilling unit Number of drilling spindles: 3 (1 vertical, 2 horizontal) Drill diameter: 8 - 40 mm Spindle speed: 150 - 1,100 rpm Drilling spindle feed: 0 - 500 mm/min Rapid traverse: 3,850 mm/min Rapid retract: 8,000 mm/min Positioning speed: 15,000 mm/min Automatic tool changer: 15 tool positions (3 × 5) Clamping system Horizontal clamping force: 25,000 N Vertical clamping force: 4 × 10,000 N Saw unit Saw blade diameter: 1,430 mm Saw blade type: HSS segment saw blade Saw blade dimension: 100 × 4 × 30 × 250 mm Cutting width: 9.5 mm Cutting speed: 8 - 30 m/min Saw feed: 0 - 400 mm/min Rapid retract: 2,000 mm/min Drives Drilling drives: 3 × 11.0 kW Saw motor: 18.5 kW Positioning drives: 3 × 1.5 kW Hydraulic unit: 5.5 kW Hydraulic saw: 3.0 kW Vertical clamping cylinder: 1.5 kW Swiveling drive: 0.25 kW Hydraulic oil heater (option): 3.0 kW Total power Total connected power of drilling unit: 43.0 kW Installed total power of the complete drilling and sawing system: approx. 66 kW (incl. saw motor and auxiliary drives) Compressed air Compressed air connection: 6 - 8 bar Air consumption: 1,000 l/min Dimensions Drilling unit Dimensions (L × W × H): 6,650 × 1,300 × 3,730 mm Working height: 640 mm Weight: approx. 8,500 kg Saw Dimensions (L × W × H): 4,500 × 1,500 × 3,200 mm Working height: 640 mm Weight: approx. 10,980 kg Total weight approx. 19,500 kg (without accessories) Electrical data Operating voltage: 400 V / 50 Hz Control voltage: 24 V

Condition: used, Year of construction: 1990, serial number 720340 weight 400 kg volt 380 V band length 3400 mm Bsdpeztfx Njfx Ab Djwt band length min. 3200 mm

Condition: used, Year of construction: 2007, Saw blade overhang 95 mm Saw carriage feed: forward 1-130 m/min reverse constant 130 m/min Program slider speed: forward 80 m/min reverse 80 m/min (in EU countries forward = 25 m/min) Automatic pressure beam height control yes Automatic cutting height control yes Adjustable pressure beam clamping pressure yes Adjustable clamping chuck clamping pressure yes Completely shrouded machine table (saw body) yes Angle guide device min. pressing width 0 mm max. pressing width complete cutting length Main saw motor 18.0 kW Scoring saw motor 2.2 kW Operating voltage 400 V / 50 Hz Electrical connection value for high-power motor: 18.0 kW = 24 kW 21.0 kW = 27 kW Working height 920 mm Paint finish: textured paint gray RDS 240 80 05 Main saw blade 380 x 4.4 x 60 mm Scoring saw blade 180 x 4.4 - 5.4 x 45 mm Required air pressure 6 bar Compressed air consumption 150 NL/min Bsdpszuph Djfx Ab Dswt V at the dust extraction nozzle approx. 26 m/s Vacuum min. 1200 Pa Exhaust air volume 4600 m³/h Dust extraction connection, chip channel 1 piece 200 mm Dust extraction connection, pressure beam 1 piece 150 mm HPP 380/43/43 Cutting length 4300 mm Cutting width (program slider travel) 4250 mm Roller rail (10-track element) 1 piece Roller rail (2-track element) 5 pieces Clamping chucks 7 pieces of which the first 3 pieces are two-finger, all others are single-finger Spacing 75/275/475/1050/1850/2650/3450 mm measured from the angle ruler to the center Clamping chuck 2 additional two-finger clamping chucks possible Pos. 175/375 mm 1 additional single-finger clamping chuck possible Pos. 650 mm 4 manual trimming stops on clamping chucks Pos. 75/475/1050/2650 mm Air cushion table with roller element 2160 x 650 mm 4 pieces Central blower 1 piece Nozzle spacing of the air cushion tables 70 x 70 mm Specifically designed for bending parts. The lifting device shown in the pictures is not included.

Condition: excellent (used), Panel Beam Saw - With rear lifting table Numerical Control POWER CONTROL V2.1 (Power TOUCH) Software CADmatic 5 Cross-chains for transporting panel packs in the lifting table Lifting scissor table (mm) 4300 x 1600 Rear pushers (N.) 1 with clamps / grippers 12 Turning device (rotating unit) at 90° Max. cutting width (mm) 4300 - Useful stroke of the pushing system (mm) 4300 Max blade projection (mm) 125 Scoring Unit (max saw diameter / power) mm 180 / Kw 2,2 Main Sawing Unit (max saw diameter / power) mm 450 / Kw 28 Adjustable speed of the saw carriage (m/min) 1 - 150 Front supporting tables with Air blowing system (N.) 4 (3 x 2160mm x 650mm + 1 x 2160mm x 800mm) Total power (Kw) OPTIONAL: 200062) Automatic unloading system for cut panels and stacking system Bwjdezxn Ecjpfx Ab Dot AUTOMATECH ROBOTECH with Robot KUKA Mod. KR 470-2 PA

Condition: excellent (used), Catalog number: 8094 TECHNICAL DATA - track width: 300mm - shaft width: 300mm - max cutting height: 120mm - max blade diameter: 350mm - blade bore diameter: 70mm - from above: - 2 rows of pawls/ejectors - smooth, sliding pressure shaft - pawls/ejectors - pressure - shaft with saw blades - pressure - smooth, sliding pressure shaft - from below: - guide - pawls/ejectors - track - 1 feed speed + stepless - main motor power: 22kW - feed motor: 2kW - central lubrication - laser - extraction nozzle diameter: 250mm - table dimensions (length/width): 2000x710mm - dimensions (length/width/height): 2600x1500x1600mm – weight: 1340kg ADVANTAGES Bjdpezx U Iqjfx Ab Dewt - Made in Italy - With laser - Multi-blade saw, used, in perfect condition Net price: 36900 PLN Net price: 8786 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), functionality: fully functional, Vollmer sharpening machine for band saws, robust design. Blade width up to 360 mm. 3 switchable tooth profiles. Bwodpfx Aozmg Dyeb Det Grinding wheel, 250 mm diameter. Infinitely variable feed drive. Linear feed system. Stable support and guide blocks, height-adjustable. Machine has been technically inspected and tested.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, type of input current: three-phase, cutting height (max.): 2,200 mm, cutting width (max.): 4,100 mm, saw blade diameter: 250 mm, height adjustment type: pneumatic, actuation type: pneumatic, total length: 4,100 mm, total height: 2,200 mm, overall weight: 700 kg, Equipment: CE marking, scorer, Available from the last week of August. We are offering this very well-maintained Holzkraft VPS 2241 VR ED vertical panel saw, manufactured in 2022. The machine was installed and put into operation at our facility in May 2023. Holzkraft VPS 2241 VR ED – vertical panel saw (commissioned in 2023, excellent condition) The machine is connected and can be tested. Selling my vertical panel saw, Holzkraft VPS 2241 VR ED, purchased and assembled new in 2023, and therefore in very good condition. Bodpfsyxv T Rex Ab Dewt Selling due to expansion. Features & Highlights: • Scoring device for clean, tear-free cuts • Digital measuring displays (horizontal & vertical) • Panel positioning on movable rollers (no lifting required) • Pneumatic locking of the saw carriage • Vertical/horizontal switching • Robust, torsion-resistant machine frame • Integrated dust extraction for direct connection to a dust extraction system The machine runs perfectly, no defects. Technical Data: • Cutting length: 4100 mm • Cutting height: 2200 mm • Cutting depth: 60 mm • Saw blade: Ø 250 mm • Motor: 3 kW / 400 V • Weight: approx. 700 kg Condition: • Year of manufacture 2022 / Installation: 2023 • Low usage • Ready for immediate use If you have any questions or require more information, please send us a message or call us.

Condition: good (used), Year of construction: 2004, functionality: fully functional, For sale: a Schüco PDG Steel. Technical specifications: - Item no. 282417 - Max. saw blade diameter: 350 mm Bwedpfx Abjzx S D Nj Dot - Motor speed: 3090 RPM - Length: 6000 mm - Year of manufacture: 2004

Condition: used, Year of construction: 2025, New demonstration machine! Price on request! The STANDARD – a generic term and the world’s best-selling saw of its kind – has been on the market for over 40 years. Its current highlights: absolute angular accuracy thanks to the double locking of the saw beam, the integrated strip stop for repeat cuts, and the integrated TRK extraction system. Two versions of the dust extraction system allow for limit values of significantly below 2 mg of dust per m3 of air (TRK2) or significantly below 1 mg/m3 (TRK1). Saw frame: · Production of the machine’s precision parts to 1/100 mm · Solid, self-supporting, firmly welded, torsion-resistant saw frame · TRK2 Automatically adjusting aluminum slat grid with plastic supports · TRK1 Automatically adjusting wooden support rail · 17-point roller support with 3 brake pedals (Type 6224) · 5.15 m long, split center support at an optimal working height (Type 6224), with aluminum grids · Aluminum small parts support (1 pair), individually adjustable Saw beam: · Stable, durable saw beam steel construction Sawing unit: · Effortless operation thanks to a fully balanced sawing unit · Robust mounting of the motor carriage ensures high cutting precision · Powerful, high-torque 5.5 kW motor (7.5 hp) · Carbide-tipped circular saw blade 300/30 mm · Saw blade overhang 9 mm · Integrated stop for horizontal strip cuts · SUPERSILENT sound insulation to reduce saw blade noise · Mechanical motor brake Design, ergonomics: · Typical STRIEBIG product design · Functional and user-friendly ergonomics Assembly: Wall or free-standing assembly possible Saw blade 300 mm, scoring, 60 teeth Cutting range L: 5300 x Hvert: 2240 / Hhor: 2100 x T: 80 mm consisting of: 1.00 cutting table extension, vertical 1000 mm 1.00 language: documentation DE 1.00 sawing motor Y-D, 400V, 50Hz, A05 TRK 4.00 free-standing support, complete 1.00 small parts support, aluminum, complete (2-part) 1.00 operating hour counter 1.00 paper holder Location: Rieth Bodpfszx E Twjx Ab Dewt

Condition: excellent (used), CATALOG NUMBER 7906 Technical specifications: - Track width: 400mm - Working width of roller: 400mm - Max saw blade diameter: 450mm - Saw blade bore diameter: 70mm - Max cutting height: 160mm Bwodpszx Rqhefx Ab Dot - Table width with extension: 720mm - Table length: 1900mm From above: - Kickback fingers/ejectors: 2 rows - Sliding roller, metal, pressure type - Kickback fingers/ejectors - Sliding roller, metal, pressure type - Shaft with saw blades - Smooth sliding roller, metal From below: - Guide rail - Kickback fingers - Track - Electric body lifting - Central track lubrication - 2 feed speeds + stepless adjustment - Feed motor: 0.9kW - Main motor: 30kW - Extraction port diameter: 260mm - Overall dimensions (L/W/H): 2350x1800x2200mm - Weight approx: 2000kg ADVANTAGES – Italian manufacture – New track and sliders – Very good condition – Used multirip saw Net price: 55,900 PLN Net price: 13,300 EUR depending on 4.2 EUR exchange rate (Prices may change with significant fluctuations)

Condition: good (used), Code: 0177 Brand: NARDELLO - ITALY Model: SOTOS - CE Standard Cross cutting panel saw for postforming tops, edged and non-edged panels. Suitable for companies producing furniture, kitchens, bathroom furniture, furnishings, panels, and various - CE Standard Blade carriage unit: The blade carriage slides on linear guides with spheres blow-by and it is controlled by a brushless motor. Scoring unit group, whih is controlled by a brushless motor, allows to cut postformed edges and also special workings, which increase productivity of the machine. Pliers group and/or rear positioner are controlled by brushless motor and slide on linear guides with spheres blow-by. Cycles check-out is made by Numerical Control. Technical characteristics: Cutting width 1500 mm Cutting height 100 mm Main blade motor 7,5 Hp (5,5 Kw) Rotating speed 4000 Main blade diameter 300-400 mm Scoring blade motor 2,5 Hp (1.8 Kw) Scoring unit rotating speed 5000 rpm Scoring unit blade diameter 220-300 mm Saw carriage forward speed 0-60 m/1' Saw carriage return speed 40-70 m/1' Positioner speed 0-25 m/1' Positioner return speed 40-60 m/1' Bjdpfxew Dfnhs Ab Dswt Weight 2000 kg

Condition: good (used), Code: 0246 Brand: OMGA Model: TR 2B - NC - CE Standard Automatic double mitre saw with numerically controlled positioner for cutting frames, wood profiles, furniture, wooden window frames, doors, plastic materials, and various - CE standard Bsdpsxztydofx Ab Dewt Technical data: Numerically controlled positioner: allows cutting lists to be stored and the moving head to be positioned automatically Cutting length 3500 mm Blade diameter 350 F 30 mm Motors each 2,2 Kw Rpm 3000 Cutting width 170 mm Cutting height at 90° 102 mm N° 2 vertical pneumatic pressers Suction mouth diameter 80 mm Compressed air 6-7 bar Overall dimensions mm 4400 x 1000 x 1500 h Weight kg 600

Condition: used, Year of construction: 2016, operating hours: 3,625 h, total length: 13,600 mm, total width: 2,450 mm, total height: 2,450 mm, Colour: Grey Weight: 7.200 kg Price: On request - Year: 2016 - Documentation available: No - CE certificate present: No Bwsdpfx Abex R A Ufe Djt - Operating hours: 3625 - Max. cutting length [mm]: 1600 - Max. cutting width [mm]: 4300 - Transport dimensions: 13600mm x 2450mm x 2450mm (l x w x h) - Transport weight [kg]: 7200kg - Transport packages [pcs.]: 8 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: like new (used), Kaltenbach TL 350, manufactured in 1993, but used very rarely! Aluminum circular saw with manual feed and manual vertical clamping device. Bwedpszww A Uofx Ab Dst According to Kaltenbach documentation, the technical specifications of the TL 350 are: Saw blade: Ø 350 mm Motor power: 2.0 kW Cutting speed: 3,200 m/min Cutting range 90°: round 115 mm, square 100 mm, flat 250 × 40 mm Cutting range 45°: round 115 mm, square 100 mm, flat 190 × 40 mm Mitre angle: −45° to +30° Weight: approx. 68 kg Dimensions: approx. 450 × 840 × 750 mm Working height with base: approx. 1,008 mm A new saw blade is included!