Used Trimming Machine for sale (65,018)

Condition: ready for operation (used), circular cutting shear Max cutting width (dia): 2000 mm Max sheetthickness: 5 mm Gbsdpfx Abjygyyceuoh Type: horizontal

Year of construction: 2021, condition: ready for operation (used), A Mammut trimming machine in mint condition for the further processing of drawn and pressed parts including welding device is available. Operating hours: 444h. Including welding device CEA BSW 50, documentation available. On-site inspection is possible. Gbsdpfxsvnd T Ee Abush

Condition: excellent (used), Edge trimming machine Gbodpfx Aowiwnqsbujh Working height: 800 mm Dimensions (L x W x H): approx. 1,060 x 720 x 930 mm Compressed air connection: 6 bar Weight: approx. 120 kg Including cutter

Condition: refurbished (used), Trimming recutting machine MEM Cobra Gbedju Ni Iujpfx Abueh Cutting height 120 mm Diameter 1070 mm 4 axes variable 2 x 55 KW Refurbished machine. Optionally we can offer new sprinkle separator as in photo.

Year of construction: 1993, condition: ready for operation (used), Edging line DK 90 TL In operation until 18.12.2025 Consisting of: Infeed roller conveyor DK90 (incl. various saw sleeves) Slab separator ASV Gedpfx Abox Tp Tmsuobh Machine professionally dismantled and ready for loading

Condition: good (used), Make: OMERA Type: R4 / 12-2 Year: 1976 Table length : 1900 Table width : 1000 Steady arm throath HOR : 670 Steady arm throath VER: 940 Stroke cylinder : 350 Column diameter : 200 Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (Estimate) Length 3000 mm Width 2200 mm Gedpfx Ajkvnumebuobh Height 2500 mm Weight 2800 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2008, condition: good (used), Make: OMERA Type: R 1600 Year: 2008 Specifications Metric US Standard Max. blank / workpiece over bed 1800 Dimensions (Estimate) Length Godpokvnuuofx Abusbh 2800 mm Width 2000 mm Height 2600 mm Weight 4100 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Share on Downloads Max. blank / workpiece over bed:1800 Length: 2800mm Width: 2000mm Height: 2600mm Weight: 4100kg Table length 2500 mm Table width 1450 mm Spindle diameter 250 mm Spindle Rpm 3 - 20 Gr/1Gr Stroke pinole arm 400 mm Column arm 250 mm Troath arm 900 Height arm 1400 mm Max. blank / workpiece over bed:1800 Length: 110.236inch Width: 78.74inch Height: 102.362inch Weight: 9043lbs Table length 2500 mm Table width 1450 mm Spindle diameter 250 mm Spindle Rpm 3 - 20 Gr/1Gr Stroke pinole arm 400 mm Column arm 250 mm Troath arm 900 Height arm 1400 mm Table length 2500 mm Table width 1450 mm Spindle diameter 250 mm Spindle Rpm 3 - 20 Gr/1Gr Stroke pinole arm 400 mm Column arm 250 mm Troath arm 900 Height arm 1400 mm

Condition: used, functionality: unexamined, Ferwood code: AGG0059 - Manufacturer code: 1-056-11-0261 - Condition: Used - Functionality: Not tested - If interested, we offer refurbishment service, please contact us. Weight and transport dimensions: 9 kg, 46x39x27 cm Gbodpfxovu Avrs Abush

Condition: used, Year of construction: 1977, functionality: fully functional, machine/vehicle number: M02L/7647, Offer Number: M02L/7647 Gedpfx Abswi S Sdjusbh Machinetype: trimming machine Make: HILGELAND Type: ME2VSP Constr. year: 1977 diameter range: M8 shaft length under head: 6-80 mm output pieces/min: 200 Location: In our warehouse

Condition: used, Year of construction: 1978, functionality: fully functional, machine/vehicle number: M02L/8406, Offer Number: M02L/8406 Machinetype: trimming machine Make: HILGELAND Godjwi S Avopfx Abusbh Type: ME4SP Constr. year: 1978 diameter range: 5-12 mm shaft length under head: 10-130 mm output - pieces/min: 120 Location: In our warehouse

Condition: used, Year of construction: 1983, functionality: fully functional, machine/vehicle number: M02L/7787, Offer Number: M02L/7787 Machinetype: trimming machine Make: HILGELAND Type: ME2VM Constr. year: 1983 diameter range: 2,2-8 mm Gbjdpfswi S Ryox Abujh shaft length under head: 6-40 mm output pieces/min: 250 Location: In our warehouse

Condition: used, Year of construction: 1965, functionality: fully functional, machine/vehicle number: M02L/6992, Offer Number: M02L/6992 Machinetype: trimming machine Make: HILGELAND Type: ME2SP Constr. year: 1965 diameter range: 2,6-8 mm shaft length under head: 6-50 mm output pieces/min: 260 Gbsdpfx Aewi Taiobujh Location: In our warehouse

Condition: ready for operation (used), functionality: fully functional, Wurster & Dietz Trimming and Re-Cutting Machine Type FR7 with in-machine adjustment Star-delta soft start Feed roller table Single-blade spiral roller chip separator Gsdpsv I D Shefx Abusbh Chips discharged into a trolley Main product on the feed roller table

Condition: new, Deburring machine Make: Assfalg Gbsdpfx Asb E Dc Hobush Model: FS 5 Condition: new machine Speed: 2,800 rpm Max. chamfer width: 3 mm Equipped as standard with: - Guide rail 400 x 50 x 10 mm - Cutter head without indexable inserts - Chip drawer - Operating instructions

Condition: used, Trimming Saw / Edging Line / Twin Edger with Automatic Scanning and Adjustment consisting of: Board Infeed: * Roof chain cross conveyor (behind the frame saw roller table) * Transfer table to S-conveyor * S-conveyor Cant Infeed: Gjdpfsw Dn Ecjx Abujbh * Vertical lift * Roller conveyor * Lowerable cross conveyor Trimming Machine: * Infeed table / cross-cutting table * Optimes automatic edger infeed table with 4-sided scanning system * Esterer BNK circular saw for trimming * 2-strip slat separator * Outfeed table (main product to the right, side boards to the left) Technical data – Optimes BNK: 3 saw blades adjustable Cutting height: 160 mm Max. board length: 8 m Motor power: 2 x 90 kW Year of manufacture: 1987 The trimming line is located in Germany, between Augsburg and Stuttgart, in a smaller sawmill with an annual cutting volume of approx. 15,000 solid cubic meters. Maintenance and servicing have always been carried out properly. Adjustment shafts, infeed table + chains, gears, two drive motors, and the drive chains have all been completely replaced or renewed. Inspection during ongoing operation is possible at any time.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, PROFILATRICE COMAL PRD 12 Automatic edging machine for strip end processing. Used to prepare strip edges for subsequent roll forming. The machine is equipped with a set of rollers capable of performing cold roll forming of strips and sheets, which are continuously shaped until the desired profile or tube is achieved. Gbodpjxdr Swsfx Abueh The machine has seen very little use, is fully operational, and is in good overall condition. Manual and original documentation are available.

Condition: used, Year of construction: 2014, machine/vehicle number: 201409V, SECOND-HAND SEMIAUTOMATIC TRIMMING MACHINE FOR STRAIGHT AND SHAPED PANELS MOD. VSR FRAVOL - CE RULES - KW 1,5 Godpfx Aowr Uhyobuobh - Volt. 230/50 - Matr. 201409V - Year 2014

Year of construction: 2025, condition: new, KDT-03 Trimming Machine 380V Grooving machine – 380V powered electric grooving machine, equipped with a foot pedal with an emergency switch, has a retractable lower shaft. Includes 6 sets stones shown in the picture. Easy and convenient machine operation. Technical specifications Range of processed sheet metal: 1.2 mm Gedpfxefwmvhj Abuebh Roller diameter: 62mm Dimensions length height: 900x450x1350 (mm) Weight: 135kg

Condition: ready for operation (used), Screening machine Triman 18/30-4 Brand: Triman Surface:  length 3000 mm, width 1800 mm – 4 Decks Driving: 4 pieces vibration motors of each 3,2 kW Screen opening: [] 10-6-4-2 mm Capacity: 0-2 mm 55 t/h Gsdpfsvtvppex Abuebh Incl.: Steel Construction and Vibrating Chute.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 785 mm, travel distance Y-axis: 470 mm, travel distance Z-axis: 530 mm, table width: 500 mm, table length: 900 mm, spindle speed (max.): 8,000 rpm, XYZ LPM Vertical Machining Centre Model: LPM Year: 2016 ‘X’ axis Travel: 785mm ‘Y’ axis Travel: 470mm ‘Z’ axis Travel: 530mm Table Size: 900 x 500mm Godpfxsyg N Aae Abuebh Spindle Taper: BT 40 Spindle Speeds: 8000 RPM Automatic Toolchanger: 16 station

Condition: good (used), Bizerba X Ray Machine With reject facility Fully stainless steel Gbjdpfx Ajyivgqebueh Tests carried out using certified test pieces, non-ferrous, stainless steel, ferrous metals The unit comes with an option of a Gamma Monitor, Red Eye G20-10 In every day use

Condition: excellent (used), Year of construction: 2016, These machines are marketed as 2 opp machines and very good they are too but we consider them to be great little 1st opp machine in its own right. can be demonstrated Remarkable capacity for such a small machine. Machine has 6 tool holders Year: 2016 Control: ProtoTrak TMX Table Size: 457 x 381mm ‘X’ axis Travel: 355mm ‘Y’ axis Travel: 305mm ‘Z’ axis Travel: 455mm Spindle Speeds: 50 – 6000 RPM Spindle Taper: BT 30 Tool magazine capacity: 8 station Dimensions w x d x h: 760 x 1220 x 2585mm Gbjdpfxoydvzde Abujh Weight: 1,100 kg can be demonstrated if required

Condition: used, Year of construction: 2015, XYZ 2-OP Vertical Machining Centre ProtoTRAK TMX Control (2015) Year of Manufacture: 2015 Spindle Speeds to 6,000rpm Spindle Taper BT30 Table Size 457 x 381mm Table Travels 355 x 305 x 455mm (XYZ) 6 Station ATC Rapid Traveres 15m/min Footprint 760 x 1,220 x 2500mm Weight 1100kgs 415V Electrics Air Require for ATC Gsdpfx Aboya H Nkjujbh For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79155 Machine Serial Number: SOP02060 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2012, XYZ SLX555 x 3m ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2012) Max. Distance Between Centres 3000mm Max. Swing over Bed 560mm Max. Swing over Gap 935mm Max. Swing over Cross slides 350mm Max. Cross slide Travel 290mm Spindle Nose D1-11 Spindle Bore 104mm Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Quick Change Tool Post Tailstock MT7 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2012 Dimensions: L x D x H 5220 x 2150 x 1950 mm Weight 7400 kg Supplied with: 3 Jaw Chuck Machine Handbooks TRAKing®. Constant Surface Speed. Rapid Traverse with Joy Stick. QCTP & Holders Gbedpfxoyaywhe Abush 2 x Fixed Steadys 15” Interlocking Guards Auto Lubrication. Coolant. Worklight We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79024 Machine Serial Number: SLM00035 £47,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2007, XYZ SMX SLV 3 Axis Turret Milling Machine ProtoTRAK | SMX Control (2007) 3 Axis CNC Capacity (X Axis, Y Axis & Quill) Spindle Taper ISO 40 Spindle speeds to 70 - 3600 RPM Table Size 1473 x 305mm Table Travel: X - 1000mm Y - 410mm Knee Travel: Z - 413mm Quill Travel Z - 127mm Air Power Draw Bar Supplied with a range of spindle tooling Coolant Year of Manufacture: 2007 Weight: 1850 Kgs Power Requirements: 18A Gbsdpfxex Tiq Ss Abush *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79109 Machine Serial Number: 12308 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.