Used Trumabend for sale (44)

Condition: good (used), Year of construction: 1997, machine/vehicle number: 885258, Offer 25514 Technical Data: - Max. working length: 3060 mm - Frame opening: 2690 mm - Max. pressing force: 1300 kN - Max. distance table/ram: 535 mm - Throat depth: 410 mm - Ram stroke: 215 mm - Stroke speeds: - Downward idle speed: max. 200 mm/sec - Upward speed: 135 mm/sec - Pressing speed (downward): 1 to 11 mm/sec - Total drive power: 18 kW - Pneumatic connection: 6 bar - Required space: approx. W 3800 x H 2700 x D 2400 mm - Weight: approx. 11,500 kg Hfedpfx Aajx Ew Dqedjc Features: - 6-axis CNC control system DELEM - Two-hand control panel with foot pedal - Crowning system - CNC-controlled backgauge with height adjustment 5 - 860 mm - Hydraulic upper and lower tool clamping - Pneumatically assisted die table shifting

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2000, bending force (max.): 85 t, stroke length: 215 mm, throat depth: 410 mm, distance between stands: 1,750 mm, working length: 2,050 mm, TECHNICAL DETAILS Press force: 85 t Hsdpfx Aexxq T Neadsfc Bending length: 2,050 mm Distance between uprights: 1,750 mm Stroke: 215 mm Throat depth: 410 mm MACHINE DETAILS Control: DELEM Dimensions & Weight Machine dimensions (L x W x H): 2,700 x 2,100 x 2,400 mm Weight: 7,900 kg EQUIPMENT Two-hand operation 2 support arms Side safety doors Lasersafe Fissler Wila tool clamping system Die shifting Crowning Tool cabinet

Condition: excellent (used), functionality: fully functional, Year of construction: 1997, control type: CNC control, actuation type: hydraulic, controller manufacturer: DELEM, controller model: DA65, bending force (max.): 50 t, working width: 1,200 mm, number of axes: 4, overall weight: 4,750 kg, total length: 2,500 mm, total width: 2,000 mm, total height: 2,100 mm, power: 8 kW (10.88 HP), input voltage: 400 V, Equipment: CE marking, angle measuring system, documentation/manual, emergency stop, foot remote control, For sale: Used TRUMPF TrumaBend V50 press brake, year of manufacture 1997. The machine is in excellent technical condition and is highly reliable. Very precise and repeatable. In February 2024, all valve seals, safety valves, and hydraulic oil with filters were replaced by authorized service. The machine has a very low number of operating hours. Equipped with wiring for ACB sensors. Hydraulics: Hoerbiger Tool type: hydraulic Wila / Trumpf Hjdpsx Rcf Dofx Aadofc Control unit: DELEM DA65 Number of axes: 4 - Y1, Y2, X, R Number of back gauge fingers: 4 Machine number: 881125 Model: TrumaBend V50 Year of manufacture: 1997 Maximum pressing force: 500 kN Working length: 1200 mm Power: 8 kW Voltage: 400 V Hydraulic system pressure: 290 bar Weight: 4750 kg Overall length: 2500 mm Overall width: 2000 mm Overall height: 2100 mm If you have any questions or need additional information, please send a message or contact us by phone.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: 885669, bending force (max.): 130 t, working width: 3,050 mm, stroke length: 365 mm, throat depth: 410 mm, clearance between the columns: 2,800 mm, TECHNICAL DETAILS Pressing force: 130.0 t Working area Hodpfx Aew Dqckjadefc Working width: max. 3,050 mm Max. stroke: 365 mm Throat depth: 410 mm Distance between columns: 2,800 mm Number of axes: 6 Control Control: CNC Control type: Delem DA65 Controlled axes: Y1-Y2 + X-R-Z1-Z2 + I + crowning MACHINE DETAILS Dimensions and Weight Overall length: 3,500 mm Overall width: 2,200 mm Overall height: 2,400 mm Weight: 11,000 kg EQUIPMENT WILA hydraulic clamping Angle measurement system Documentation CE marking

Year of construction: 1998, condition: ready for operation (used), General Data Machine weight 8600 kg Control Unit Model Delem 65 CNC control Main Drive Bending length 2550 mm Additional Equipment Hodpfx Aox D N Susadsfc Extended Installation Height and Stroke: Additional 150 mm each 2nd Foot Switch This 6-axis TRUMPF TrumaBend V85S press brake was manufactured in 1998. It features a bending length of 2,550 mm, an 850 kN bending force, and a 6-axis back gauge. The Delem 65 CNC control enhances precision, while the electro-hydraulic twin cylinder drive ensures robust performance. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V85S machine we have for sale. Contact us for more information about this machine. Application Types Bending

Condition: ready for operation (used), Year of construction: 2001, Main Drive Number of axis 5 Additional Equipment Top drive concept in two-cylinder design y1/y2 Hfjdjx D Nkdepfx Aadoc Electro-hydraulic ram drive with proportional valve technology Ram travel measuring system with spring deflection compensation via glass scales Modern block hydraulics Cnc backgauge system Safe finger adjustment from the front Self-centring, manual, hardened upper tool holder for vertical tool change Hardened, manual lower tool holder Programme-controlled lower tool displacement (i-axis) for 2 positions Modern protective cover This 5-axis TRUMPF TrumaBend V85 press brake was manufactured in 2001. It features an electro-hydraulic ram drive, CNC backgauge system, and a modern protective cover. The machine includes a 4-axis back gauge system and both hydraulic upper and lower tool clamping. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V85 machine we have for sale. Contact us for more information about this machine. Application Types Bending

Year of construction: 1997, operating hours: 47,122 h, condition: ready for operation (used), Control Unit Model DA-65 Brand DELEM Additional Equipment Hedpfx Aasx D Ec Aedjfc Hydraulic clamping system This 6-axis TRUMPF Trumabend V170 press brake was manufactured in 1997. It features a bending force of 1700 kN and a maximum bending length of 4060 mm. The distance between uprights is 3680 mm, and it includes a hydraulic clamping system. Consider the opportunity to buy this TRUMPF Trumabend V170 press brake. Contact us for more information about this machine. Application Types Bending

Condition: good (used), functionality: fully functional, Year of construction: 2008, Press force: 85 t Bending length: 2750 mm Hjdpjxu Nagofx Aadefc Distance between uprights: 2260 mm Total power requirement: 17 kW Machine weight approx.: 8,300 kg Space requirement approx.: 3800 x 2300 x 2400 mm Operating hours: 80,005 h

Condition: excellent (used), Year of construction: 1994, Hydraulic press brake Fab. TRUMPF Typ. TrumaBend V50 Year 1994 Technical data: Trumpf Make: Trumpf Type: TrumaBend V50 Year of construction: 1994 Capacity: 50 t Effective length: 1270 mm Stroke: 215 mm Operating pressure: 290 bar Voltage: 3 x 400V Rated current: 12.5 A Connected load: 8.0 kVA Compressed air connection: 6 bar Dimensions: approx. L 2.00 x W 2.00 x H 2.40 m Weight: 4750 kg Equipment: Control unit - Control system: Delem DA-28 - Pneumatic die displacement - Hydraulic tool clamping top and bottom - Controlled axes: Y1, Y2, X, R - 3 manual stop fingers, pneumatically clampable Hfedsr D Sdgspfx Aadsc - Tools: Punch set segmented, straight, 1050 mm, new Die V16, 30° 1000mm Die V08, 30° 1000mm Die V10, 30° 1000mm All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 57,202 h, General Data Measurements width 2210 mm Measurements depth 5000 mm Measurements height 3100 mm Machine weight 18000 kg Control Unit Brand TRUMPF Main Drive Pressing force 1700 kN Bending length 4080 mm Stroke 365 mm Number of axis 8 This 8-axis TRUMPF TrumaBend V170 press brake was manufactured in 2003. It features a pressing force of 1700 kN, a stroke of 365 mm, and a maximum bending length of 4080 mm. The distance between columns is 3680 mm. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V170 machine we have for sale. Contact us for further details regarding this machine. Application Types Bending Hodpfsx D Ilyox Aadefc

Condition: good (used), Year of construction: 1997, machine/vehicle number: 887043, Offer 24557 Technical data: - max. working length 4060 mm - column clearance 3680 mm - max. pressing force 1700 kN - max. distance table / ram 385 mm - column projection 410 mm - ram stroke 215 mm - stroke speeds - downward speed idle max. 200 mm/sec - upward speed 135 mm/sec - downward pressing speed 1 to. 11 mm/sec - Total drive power 30 kW - Space requirement approx. W 5600 x H 3000 x D 2400 mm - Weight approx. 18000 kg - with: - with 6-axis CNC control DELEM - Two-hand control panel with foot switch Hfjdpfx Asu T Nknoadec - Crowning device - Controlled back stop with height adjustment 5 - 860 mm - Hydraulic upper + lower tool clamping - Die table displacement pneumatically supported

Condition: used, functionality: fully functional, Year of construction: 2001, Press force 85 t, Bending length 2050 mm, Distance between uprights 1750 mm, Control DELEM, Stroke 215 mm, Throat depth 410 mm, Total power 13 kW, Weight 8,750 kg, Machine dimensions 3190 x 2100 x 2375 mm Hodpfx Ajw Imq Readefc

Condition: used, Year of construction: 1999, Press force 230 t Bending length 3060 mm Distance between uprights 2690 mm Stroke 365 mm Control DELEM DA 66 T Distance between posts 2690 mm Dimensions 3660 x 2310 x 3100 mm Machine weight approx. 17,700 kg Equipment: - 2-hand foot switch - Side safety doors Hodpfx Ajwn Efusadofc - Safety door behind the machine - Control renewed in Delem DA 66 T

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, Pressure: 85 t Bending length: 2050 mm Frame gap: 1750 mm Control: DELEM Stroke: 215 mm Throat depth: 410 mm Hfedpfx Aaew D Abrsdsc Total power: 13 kW Weight: 8,750 kg Machine dimensions: 3190 x 2100 x 2375 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2004, machine/vehicle number: B0103A0209, overall weight: 11,000 kg, total length: 3,200 mm, total width: 2,400 mm, total height: 3,000 mm, pressing force: 85 t, TECHNICAL DETAILS Pressure force: 85 t Bending length: 2050 mm Column width: 1750 mm Thrust: 410 mm Operating pressure: max. 340 bar Hsdpfx Aaov E Ncgsdefc Stroke: max. 365 mm Deceleration: max. 95 ms Rapid traverse: 200 mm/s Working speed: 1 - 11 mm/s Retraction speed: 135 mm/s Safety distance Safety distance: min. 190 mm Machine weight Weight of the press: 9,950 kg

Condition: used, Year of construction: 2000, CNC press brake Manufacturer: Trumpf Model: Truma Bend V170 Year of manufacture: 2000 CNC control: Delem Press force: 170 t Working width: 4 m Crowning system Backgauge 6 axes Hydraulic tool clamping Height: 2.9 m without tools Hfsdpfxsx Di Hxs Aadoc ä3226

Year of construction: 1996, condition: excellent (used), Used very clean, well maintained Trumpf V series hydraulic down stroke cnc pressbrake for sale Trumpf v85 2metre x 85ton – 4axis cnc pressbrake in good condition – video at the bottom of the listing Make: Trumpf Model: Trumabend v85 Year: 1996 Max. pressing force: 850 kn / 85ton Max. stroke: 215mm Brake time: 79ms Total axis: 2axis back gauge / total axis 4 – y1 y2 x r and i axis Complete with: • Daylight: 390mm daylight • 2 axis back gauge Hfjdpfx Asi Igi Seadoc • i axis – bottom base moves to use twin multi v without operator moving or changing the tooling • Fully serviced / Good condition

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, Used very clean, well maintained Trumpf V 85S series hydraulic down stroke cnc pressbrake with a large amount of tooling for sale Trumpf v85s 2.5 metre x 85ton – 4axis cnc pressbrake in good condition Make: Trumpf Model: Trumabend v85s Year: 1996 Max. pressing force: 850 kn / 85ton Max. stroke: 215mm Hfodpfx Aer Hcl Asadjc Brake time: 86ms Total axis: 2axis back gauge / total axis 4 – y1 y2 x r and i axis Large amount of upper and lower Trumpf tooling, some tooling is brand new Complete with: • 2 axis back gauge • i axis – bottom base moves to use twin multi v without operator moving or changing the tooling • Fully serviced / Good condition

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1995, operating hours: 29,650 h, machine/vehicle number: 885802, control type: CNC control, controller manufacturer: Delem, controller model: DA23e, bending force (max.): 130 t, working width: 3,005 mm, stroke length: 215 mm, installation height: 385 mm, oil tank capacity: 150 l, travel distance X-axis: 600 mm, back gauge adjustment: CNC-controlled, back gauge speed R-axis: 300 mm/s, back gauge travel distance R-axis: 250 mm, overall weight: 13,000 kg, total length: 3,640 mm, total width: 2,210 mm, total height: 2,375 mm, Equipment: documentation/manual, Trumpf CNC-controlled press brake, used. Type TrumaBend V 130 X, year of manufacture 1995. With hydraulic clamping but without tools. The machine is powered and can be demonstrated. Sale from current location. Hfodpow Ud D Usfx Aadec