Used Tube Plasma for sale (2,451)

Condition: used, Year of construction: 2023, functionality: unexamined, total width: 3,000 mm, total length: 6,000 mm, Equipment: documentation/manual, We are selling our CNC plasma cutting machine at our Krefeld-Linn location. Unfortunately, this excellent machine is not being fully utilized, so we are offering it for sale. It is suitable for plasma and oxy-fuel cutting. The machine is operational at the location and can be inspected or tested while in operation with some advance notice (personnel must be present on-site, gas must be available). Bevel cutting and marking of components were the applications that, in addition to the generally high quality of the machine and the cut edges, always impressed us. New price in 2023: EUR 290,000 plus VAT (including installation). Machine designation: MasterCut 6001.30PtkG Plasma rotator "MasterCut" for weld preparation with the Kjellberg® Q 3000 plasma power source Oxy-fuel support, fully automatic Total working area: approx. 6,000 x 3,000 mm Max. travel height: approx. 150 mm Max. table load: approx. 150 mm Guideways in X-direction: milled S49 rails Drives: digital, maintenance-free AC servo motors with IRC Positioning speed: up to 30,000 mm/min Positioning accuracy: ≤ 0.15 mm/m Bidirectional repeatability: 0.05 mm/m 1. Control PC 2. USB 3.0 connection for storage media 3. Remote maintenance module MicroStep RemoteDiagnostics® 4. Flame cutting table with sectional extraction | 6,000 x 3,000 mm 5. Grid cover in the flame cutting table | 6,000 x 3,000 mm 6. Reinforced design of the flame cutting table | 6,000 x 3,000 mm 7. Kjellberg® plasma power source Q 3000 8. Connection of the fine plasma source to the CNC control 9. Control of the automatic gas console 10. Electrical and mechanical torch sensing 11. Integration of an existing Kemper filter system, Type System 8000 with a capacity of 7.5 kW. Godpfx Aj Aihalod Rsui 12. LED signal column on the portal bridge (2 colors) 13. Tactile shut-off device for guideways 14. Light curtain protection (collision protection) of the portal bridge via emergency stop 15. Smart Z Movement 16. Plasma rotator "MasterCut" with fully automatic support 17. ACTG® - Automatic calibration unit for the bevel cutting unit 18. ACTG® Calibration Report 19. Oxy-fuel support | fully automatic 20. Automatic gas console for oxy-fuel torch (cutting gas: acetylene) 21. Machine cutting torch GCE® FIT+ three (cutting gas: acetylene) 22. Active collision protection 23. Asper Basic® | The 2D programming software (single-user license) including gas system and extraction. We can dismantle and load the system at the buyer's direction and risk.

Year of construction: 2015, condition: used, This listing is for 2015 Cedrex Fluid X xsd-48 Pro Automated Tube Decapper The unit is in full working condition and ready for immediate use This automated tube decapper is a robust system designed to provide accurate and consistent performance for high-throughput sample management and storage workflows. Manufactured by Cedrex, this reliable unit is an excellent addition to any modern facility processing sample tubes at scale. Transparency Report and Technical Audit: Software and Media Disclosure: Guodpfx Aszqf Hhod Rsi As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished)

Condition: good (used), functionality: fully functional, Year of construction: 2009, pipe diameter (max.): 60 mm, pipe length (max.): 6,000 mm, bending radius (max.): 200 mm, bending radius (min.): 35 mm, overall weight: 4,400 kg, input current: 63 A, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, emergency stop, We are offering this used Dynobend DB60 tube bending machine, manufactured in 2009. Manufacturer: Dynobend Type: DB60 Machine number: 2009-11-B789 Year of manufacture: 2009 Weight: 4,400 kg Voltage: 230/400 V Frequency: 50 Hz Connected load: 40 kVA Maximum current: 63 A Great opportunity from a single owner: High-quality mandrel bending machine Dynobend DB-60 including a €70,000 tool package. For sale is a powerful and precise mandrel bending machine, type Dynobend DB-60, manufactured in 2009. The machine was purchased new directly from the manufacturer and has been in our possession ever since. It has been regularly maintained. It bends predefined designs fully automatically and reliably. The absolute highlight: Huge tool package included! The machine comes with an extremely comprehensive package of 18 different tool sets for round tubes ranging from Ø 17.2 mm to Ø 60.3 mm. The new price for these tools alone was approximately €70,000. This means you will be ready for an extremely wide range of tube processing applications immediately. Technical highlights & scope of performance: • Maximum tube length: up to 6,000 mm can be processed. • Intelligent control: The calculation of all required bending parameters is carried out according to the X-Y-Z coordinate system with convenient input via the touchscreen. • Bending radius: The largest possible neutral bending radius is at least 200 mm. • Condition & maintenance: Good, used condition. The machine has been regularly maintained directly by Dynobend; any necessary wear parts have been replaced promptly when needed. • Usage note: The fully automatic bending process depends on the minimum straight intermediate length between two bends as well as the overall design (with regard to potential collisions with the machine/floor in complex shapes). Important technical note: The laser scanner of the safety system has already been replaced, but it is currently not functioning correctly. The customer may need to take remedial action or make improvements. Complete documentation available: The machine will be delivered with all important and legally relevant documents: • EC declaration of conformity (Directive 98/37/EEC, Annex II A) • Original acceptance test report • Complete original operating manuals (pneumatics, hydraulics, electrical system, Sick laser scanner, program manager, and user manual) • All descriptions and maintenance invoices are available and can be disclosed. Inspection & demonstration welcome: Come and see for yourself! The bending machine is currently powered up and fully functional. After prior arrangement, we will be happy to demonstrate the machine in operation. Sales and delivery conditions: • Price: On request / negotiable. • Delivery condition: Ex works (EXW). • Logistics: The dismantling, the proper loading, and the removal must be organized by the buyer or carried out by a commissioned shipping company. Subject to prior sale. Gjdpfxj Ahiuaj Ad Roui Take advantage of this opportunity for an immediately ready-to-use professional machine with enormous accessory value. We look forward to hearing from you and arranging an appointment for an inspection!

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, MESSER MULTITHERM 3600 GLOBAL CNC PLASMA BED LENGTH 10300mm BED WIDTH 2100mm RAIL WIDTH 3650mm HYPERTHERM HPR 260. Cutting capacities: Mild steel cut capacity Dross free* 32 mm (1-1/4") Production pierce 38 mm (1-1/2") Maximum cutting capacity 64 mm (2-1/2") Gedpfxoy Tpqxe Ad Rjui Stainless steel cut capacity Production pierce 32 mm (1-1/4") Maximum cutting capacity 50 mm (2") Aluminum cut capacity Production pierce 25 mm (1") Maximum cutting capacity 50 mm (2")

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, laser type: fiber laser, laser power: 3,000 W, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Type: Two chucks Groove function: Standard Power range: 3KW, 6KW Round tube processing range: 10mm~160mm Square tube processing range: 10mm~160mm Chuck maximum speed: 130r/min Machine weight: 3T Power specification: 380VAC, 50Hz Optional loading rack: G16pro-automatic loading, G16pro-semi-automatic loading Optional unloading rack: servo unloading rack, cylinder unloading rack Standard: System 3000DE-DH, including nesting, supports servo, dustproof (Y axis), dustproof (X axis), dustproof (Z axis), rear card hollow dust removal, short tail material Optional: safety fence (light curtain), radiation-proof glass Gusdpfxewwz Dlo Ad Rei

Condition: used, Year of construction: 2020, COALZA RS300-DH Automatic Ice Bagging / VFFS Packaging Machine - 2020 We have 2 units in stock. Check out our other listings. DrDryice Used Coalza RS400-DH vertical form fill seal packaging machine with overhead volumetric dosing system and stainless steel support structure. Manufactured by Coalza, Spain. The RS400-DH model was developed for dosing and packing ice cubes into bags. It is an option for ice producers, packaged ice suppliers, and businesses looking to expand or replace equipment in an existing ice packaging line. TECHNICAL DATA Manufacturer: Coalza Model: RS400-DH Year of manufacture: 2020 Electrical supply: 400 V, 50 Hz Connection: 3 phases + neutral + earth Current stated on nameplate: 3.182 A Power stated on nameplate: 0.86 kW CE marking on the identification plate Gjdpfj Akbdysx Ad Rsui EQUIPMENT SHOWN Overhead rotary volumetric cup dosing assembly Large product hopper and discharge funnel Stainless steel cabinet and elevated support frame Three OMRON E5CD temperature controllers Separate controls for vertical sealing and internal/external horizontal sealing Doser up/down adjustment control Access panels and adjustable levelling feet The vertical packaging process combines bag forming, product filling, and sealing. The overhead dosing arrangement feeds measured portions towards the packaging section. Bag sizes, filling weights, production speed, compatible film, and suitability for other products depend on the installed tooling and configuration. These details must be confirmed for the intended application. Offered in the configuration shown in the photographs. Scope of supply and operating condition to be confirmed before purchase. Other machines visible in the background are not included. Please send your required bag weight, product type, and target output when enquiring. SEARCH KEYWORDS Coalza, Coalza RS300-DH, RS300 DH, RS 300 DH, RS300DH, RS300, automatic ice bagging machine, ice packing machine, ice packaging machine, ice cube bagger, ice cube packing machine, ice cube filling machine, packaged ice equipment, bagged ice production, industrial ice packaging, ice dosing machine, volumetric ice filler, ice bag filling and sealing, vertical packaging machine, vertical bagging machine, vertical bagger, VFFS, vertical form fill seal, form fill seal machine, FFS packaging, automatic bagger, bag making machine, bag forming machine, bag filling machine, bag sealing machine, automatic filling and sealing, rollstock packaging, film packaging machine, pillow bag machine, volumetric cup filler, rotary cup doser, volumetric dosing system, dosing and packing machine, stainless steel packaging machine, used packaging equipment, second-hand bagging machine. RELATED BRANDS FOR COMPARISON Rovema, Syntegon, Bosch Packaging, IMA Ilapak, Ishida, ULMA Packaging, TNA, Viking Masek, Velteko, Hayssen, Sandiacre, Matrix, Hamer, nVenia, Dolzan, MF TECNO, Hastamat, Wolf, Mespack, PFM. These names refer to other packaging machinery brands. The machine offered is a Coalza RS300-DH.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, 25-TAPE CORE WINDING MACHINE WITH MULTI-BLADE CUTTING SYSTEM Structural description: The 25-tape core winding machine for producing paper tubes consists of the following components: Unwinder – made of shaped tubes protected with anti-corrosion powder coating. The unwinder has the ability to move on adjustable swivel wheels controlled from the operator panel. Cascade adhesive applicator with pneumatic brakes, scrapers, and adhesive heater, distinguished by the ability to adjust tape guiding, braking, and adhesive film thickness. Adhesive supply is controlled by a membrane pump, and the entire system is controlled by a computer managing the operation. Forming section – consists of a steel body protected with powder coating, inside which the control system is located, a swivel arm with drums driven by 3 roller gearboxes with a total power of 3 x 15 kW. The drive arm has a reading of the swivel angle and longitudinal position, as well as a pneumatic belt tensioning system. The body has a replaceable "cold" mandrel for forming the cores with a standardized socket, and a guide tube with a counter-knife. Multi-blade cutting system – the cutting system body is a separate part of the core winding machine. Linear guides for the movement of the cutting unit are mounted on the body. Inside the body, the following drives are mounted: - servo drive for driving the circular knives of the cutting system - servo drive with planetary gearbox for moving the cutting unit - servo drive for retracting the counter-knife - servo drive for lowering the knife bar with 5 cutting modules. Gujdo Ah Ex Njpfx Ad Rji Coil width from 50 to 120 mm Coil diameter Dz = Ø 76 mm, Dz. Max. 1500 mm Coil loading: Electric winch Min. max. internal diameter of cores 38 mm / 250 mm Cutting performance for cores: Ø 50 mm, L= 100 mm, thickness 8 mm 160 pcs./min. / 9,600 pcs./h, 67,200 pcs. / 7h Lease transfer.

Condition: used, functionality: fully functional, Year of construction: 2008, Peddinghaus FDB 1000/3 – CNC Plate Drilling & Profiling System– Year 2008 6 metres x 1 metres Capacity. Maximum workpiece width 1000 mm. Maximum workpiece thickness 50 mm. Gusdpoy E N Hdofx Ad Rei 3 x drilling spindles. Maximum drilling diameter 40 mm. Oxy‐Fuel. Hypertherm Plasma. Kemper Extraction Unit

Condition: used, Year of construction: 2021, functionality: fully functional, sheet thickness (max.): 25 mm, working width: 1,500 mm, hose package length: 10,700 mm, working length: 3,000 mm, CNC Plasma Cutting System Swift-Cut Pro 3000 MK 5 – Complete Manufacturing Cell incl. Portal Crane & Hypertherm 105 SYNC Description For sale is a professional, fully functional, and immediately ready-to-use CNC plasma cutting system, type Swift-Cut Pro 3000 (MK 5). The system was acquired from the renowned specialist dealer Heidenbluth Schweißtechnik and set up as a well-thought-out, turnkey manufacturing cell. The machine is in operation, has few operating hours, and can be inspected and tested while powered on. Scope of Delivery & Technical Equipment Gjdpfx Ae Ah Eu Eod Rsui • CNC Cutting Table: Swift-Cut Pro 3000 MK 5 with a working area of 1,500 mm x 3,000 mm. Equipped with a sectional extraction table, Soft-Sense height sensing, collision protection, and a robust steel frame with integrated forklift attachment. • Plasma Power Source: Hypertherm Powermax 105 SYNC (year of manufacture 04/2021) incl. CPC connection, voltage divider, and serial interface for precise cuts up to 25 mm sheet thickness. • Cutting Torch: Machine cutting torch Smart SYNC 180° (10.7 m). • Material Handling System (Portal Crane): Solid, custom-made steel crane frame including a heavy-duty trolley with chain hoist for ergonomic loading of large-format sheets. • Marking System: Integrated marking system PRO. • Exhaust & Compressed Air: Powerful exhaust fan set (radial fan with wall console) for long duct runs including approx. 20–25 m of flexible ducting. Integrated Camozzi compressed air maintenance unit and a water separator Dropout 600 A. • Control & Software: Industrial control console with touchscreen monitor, PC and LAN connection. Including full versions of SWIFT Wizard 3 (automatic nesting) and SWIFT Cam Wizard 3 (incl. 2nd license with dongle for an additional external workstation). • Accessories: Comprehensive set of wear parts (SYNC 45A to 105A, FineCut nozzles, electrodes and wear parts box). Sales and Delivery Conditions • Price: €28,500 (net) OBO (or best offer) • Location: Schleswig-Holstein • Availability: Immediately • Delivery: The sale is intended for self-collection. Assistance with loading on-site is possible upon agreement using a forklift. Dismantling of the ceiling structure (crane) and the piping is carried out by the buyer after consultation.

Condition: used, Year of construction: 2023, Manufacturer: Plasmatreat GmbH, Steinhagen, Made in Germany Type: PTU1212 Serial no.: 10715 Commission no.: 262904 Year of manufacture: CW 19/2023 Power supply: 3~ / 400 V / 230 V AC / N / PE, 50–60 Hz Imax / fuse: 12 A / 3 × 16 A Icw: 0.64 kA Marking: CE Equipment (as per photos and HMI) KUKA articulated robot for part handling within the cell. Plasma nozzle system PFW10PAD (designation as per HMI). PlasmaPlus® unit (HMI function “PPlus”) with vaporizer, gravimetric precursor dosing, MFC/GFC gas control for process and carrier gas, and precursor reservoir. Plasmatreat touch HMI on a support arm, with recipe management, set/actual and tolerance monitoring of all process parameters, emergency stop and control buttons. Fully enclosed safety housing with glazed doors, signal light, main switch, and extraction connection. Gujdj Air S Eepfx Ad Rei Mobile control unit with push buttons. TBH extraction and filter unit, connected to the cell via a flexible hose. Please note: * Sold in the name and on behalf of BorgWarner Turbo Systems. * Location: Kirchheimbolanden, Germany * Not included: workpieces, work tables and part carriers, pedestal fan * The machine is currently not in production and has been stored.

Condition: used, functionality: fully functional, Year of construction: 2004, machine/vehicle number: 265040200001, Technical specifications available upon request. Gedpfx Adozd Hhme Rsui

Condition: like new (used), Year of construction: 2025, operating hours: 30 h, functionality: fully functional, machine/vehicle number: W/S0202302027375, type of cooling: water, Equipment: documentation/manual, STAHLWERK CUT 160 P IGBT Plasma Cutter - powerful 160 amp, precise high-frequency (HF) pilot arc for first-class arc starting. The powerful STAHLWERK CUT 160 Pilot IGBT plasma cutter with 2T/4T mode and high-performance water cooling delivers a powerful 160 amps and features a precise high-frequency (HF) pilot arc for first-class arc starting. The cutting performance is up to 52 mm, depending on the material (structural steel P235 up to 52 mm, V2A or V4A up to 48 mm, aluminum up to 42 mm). In addition to common conductive metals, the plasma cutter is also suitable for coated sheets and surface rust. The cutting current can be adjusted steplessly from 20 to 160 amps. The compact unit features smart cooling and overheating protection and is easy to transport at only 38.3 kg. • Plasma / CUT - A plasma arc is generated by means of current, which melts the material, which is then removed with compressed air. This allows all conductive metals, such as standard steel, stainless steel, copper, aluminum, titanium, etc., to be cut precisely with ease. • Cutting thickness - Cutting up to 52 mm is possible, depending on the material. Structural steel P235 up to 52 mm, V2A or V4A up to 48 mm, aluminum up to 42 mm. • Pilot arc - High-frequency (HF) pilot arc for first-class arc starting. No contact with the workpiece is necessary! The pilot flame establishes the arc. This torch can be operated with a spacer, which is included. • Cutting current - Stepless adjustment from 20 to 160 A. • Airflow - After the cutting process is completed, air flows to cool the torch and reduce wear on the nozzle and electrode. • 2T/4T - determines the control of the operating mode and offers extended control over the current profile. In 2T mode, the high-frequency ignition (HF) remains active until the trigger on the torch is released. In 4T mode, the arc is ignited after the trigger is pressed and released once. After another press and release, the ignition is stopped. • Lightweight & compact design - With a weight of only 38.3 kg and dimensions of 630 x 320 x 600 mm, the unit is ideal for cutting work in any location. Innovative IGBT transistors save space and weight compared to the old MOSFET technology. No more heavy lifting, thanks to the transport rollers under the unit! • Highest efficiency & performance - Three-phase alternating current (400 V) powers the unit and allows an output power of a true 160 amps. • Smart cooling & overheating protection - State-of-the-art technology, an integrated overheating protection and a high-performance cooling system enable the maximum performance to be achieved. • Water cooling - The high-performance water cooling guarantees optimal cooling of the entire hose pack at all times. The water cooler is already included in the scope of delivery! Product details Operation of the Stahlwerk plasma cutter Power connection 400 V | 20 A Compressed air as gas Required pressure no manufacturer's specification Air flow no manufacturer's specification Cutting Guedpfx Adsz Rivfe Rei Duty cycle at maximum 60 % Max. current for continuous cutting 32.6 A Cutting depth structural steel ST37 10 mm Cutting depth V2A and V4A stainless steel 7 mm Cutting depth aluminum 4 mm Cutting current 20 - 160 A Ignition Pilot arc Inverter IGBT Accessories Plasma torch Length 5 m Plasma nozzle Plasma electrode Ceramic cap Cutting nozzles, ceramic caps, protective clothing available as accessories.

Condition: used, Year of construction: 2015, operating hours: 300 h, functionality: fully functional, machine/vehicle number: 1924/15, working range: 3,000 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 10 mm, overall weight: 3,500 kg, input voltage: 400 V, total width: 2,000 mm, total height: 2,000 mm, total length: 5,700 mm, cutting height (max.): 50 mm, track width: 1,500 mm, workpiece weight (max.): 2,000 kg, table length: 3,000 mm, working width: 1,500 mm, cutting current: 28 A, warranty duration: 3 months, space requirement length: 5,700 mm, input current: 28 A, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 200 mm, space requirement height: 2,000 mm, space requirement width: 2,000 mm, type of cooling: air, input frequency: 50 Hz, electrical fuse: 20 A, Equipment: documentation/manual, The machine is in very good condition and has undergone annual maintenance. Performance has decreased by approximately 10%. A rotating head for phase cutting is included. Guedpfxo Akhb As Ad Rsi Includes filter and extraction system.

Condition: good (used), functionality: fully functional, Year of construction: 2020, CNC Plasma Cutting Machine PIERCE 02047 RUM 3000+ GP including accessories Workstation Specifications 1) CNC Cutting Machine RUM 3000+ GP Year of manufacture: 2020 Serial No.: 02047 Machine condition: Used, fully operational Working cutting width: 2,500 mm Cutting length: 12,000 mm Maximum cutting width: 2,550 mm Maximum cutting length: 12,050 mm Machine track length: 14 m (12 m + 2 m parking area) Position of PIERCE 19" control unit: Left side of the machine gantry Floating motorized oxy-fuel cutting head with EI and THC: 1 pc Floating motorized plasma cutting head with IHS and THC: 1 pc Material types: Mild steel / stainless steel Oxy-fuel technology – cutting gas: Propane Oxy-fuel torch type: HARRIS Position of utility supply lines along the longitudinal axis: Lower position Energy chain type: Energy chain with aluminum cover, width 200 mm Data transfer to control unit: USB port + Wi-Fi network (client) Automatic machine zero-position detection: Yes Laser Cross optical positioning system: Yes, 1 pc (mounted on the plasma head) Plasma technology – anti-collision system: Magnetic, 1 pc Machine operating ambient temperature: +10 °C to +40 °C Minimum ambient temperature must not fall below +5 °C Guodo Ait U Repfx Ad Roi 2) Plasma Unit Hypertherm HPR260XD with AGC (Automatic Gas Console) Year of manufacture: 2013 Serial No.: 260XD-004852 3) Cutting Table TIGEMMA Medium Series Working table dimensions: 2.5 m × 12 m Overall internal table dimensions: 2.6 m × 12.3 m Table load capacity: 1,800 kg/m² Maximum cutting material thickness: up to 220 mm Table section control: Pneumatic (rail system)

Condition: used, This listing is for Cedrex Fluid X - xtl - CMTL-96 Mark 111 Automated Tube Labeler The unit is in full working condition and ready for immediate use This automated tube labeler is a high-quality lab instrument manufactured by Cedrex (Model: Fluid X - xtl - CMTL-96 Mark 111). Streamlines sample tracking by rapidly and accurately applying durable labels to sample storage tubes. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished) Gedpfxjzqf Eke Ad Reui

Condition: used, Power connection: 20A, frequency: 60Hz, mains voltage: 120VAC, phase: single-phase. An on-site inspection is possible. Gedpfx Aoz Da Rlod Reui

Condition: used, This listing is for the Barkey Plasmatherm Laboratory plasma thawer The units are in full working condition and are ready for immediate use These items show very little signs of use Available in original packaging with manuals The Barkey Plasmatherm is a specialised laboratory and clinical device designed for the safe thawing and warming of fresh frozen plasma (FFP), blood components, and other infusion products. The system uses controlled dry-heating technology to ensure uniform and gentle thawing while maintaining the integrity of sensitive biological samples. Gsdpfx Adeyufrgs Reui Unlike traditional water baths, the Plasmatherm operates using a sealed temperature-controlled system that prevents direct contact between samples and water. This improves hygiene, reduces contamination risk, and simplifies maintenance. The device maintains precise temperatures typically between 37°C and 45°C, ensuring optimal conditions for plasma thawing and blood warming procedures. Safety is a key feature of the system, incorporating over-temperature protection, leak detection sensors, and visual and acoustic alarms to alert operators to any irregularities. A transparent lid allows continuous monitoring of the thawing process while the intuitive control interface enables easy operation and accurate programming of temperature and time settings. The Plasmatherm is widely used in hospital blood banks, transfusion services, and clinical laboratories where rapid, reliable, and hygienic thawing of plasma and blood products is essential. Its efficient design helps laboratories improve workflow while maintaining strict compliance with transfusion and laboratory safety standards.

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) Gujdpfx Adjvpalaj Rji ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) ◼ Safety devices (safety bumpers, emergency stop cord)

Condition: used, functionality: fully functional, SAF Plasmatome 20 with Digisaf 100 control system. The machine is suitable for plasma cutting of sheet metal and is in used condition. The system is equipped with a CNC Digisaf 100 control system. Guodpfxs Ahw Duo Ad Rei Inspection and testing are possible by appointment. Sale as shown in the photos.

Condition: new, functionality: fully functional, Year of construction: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Series: NS-HG Type: Heavy pipe machine Beveling function: Optional Power range: Round pipe processing: 50mm~560mm Square pipe processing 50mm~560mm Chuck maximum 30r/min Machine weight: 29t Power specification: 380VAC, 50Hz Optional loading rack: Three-chuck chain automatic loading rack Optional unloading rack: Three-chuck chain automatic unloading rack Standard: System 5000A, including nesting, supports servo (beveling) Zero tail material rear card hollow dust removal Gjdjww Upzopfx Ad Rjui Optional: Weld detection, safety fence (light curtain), radiation-proof glass

Condition: good (used), functionality: fully functional, Year of construction: 2019, The machine is designed for precise bending of tubes and profiles, suitable for metalworking, locksmithing, the automotive industry, hydraulics, frame manufacturing, pipe components, and structural applications. It is an electro-hydraulic/electromechanical mandrel bending machine with a control panel, touch-screen control, foot control, and clamping system for precise, repeatable bends. Technical parameters from the nameplate: Gjdpfx Adj Aikv Ne Roui Manufacturer: AMOB Máquinas Ferramentas S.A. Model: MDH-90 CN2 Serial number: 9583 Series: EN19000072 Date of manufacture: 07/03/2019 Type of machine: mandrel tube bending machine / tube & profile bender Max. capacity of MDH 90 series: up to 90 mm tube diameter Control: CN2 Operation: external control panel + foot pedal Application: bending of tubes, profiles, and pipe components The manufacturer states that the MDH series features a robust construction, ergonomically designed control panel, hydraulic mandrel, pressure, and clamping system. MDH 90 is a series with a capacity of up to 90 mm. The CN2 version features numerically controlled bending angle and tube rotation between bends, which is suitable for prototypes and small series.

Condition: like new (used), Year of construction: 2025, operating hours: 150 h, functionality: fully functional, working range: 6,000 mm, sheet thickness (max.): 200 mm, sheet thickness steel (max.): 200 mm, sheet thickness aluminum (max.): 80 mm, cutting height (max.): 200 mm, table length: 6,000 mm, working width: 2,000 mm, table width: 2,000 mm, type of cooling: water, Equipment: documentation/manual, double-sided, MicroStep MasterCut 6001.20PG – 6,000 × 2,000 mm – Plasma + Oxyfuel For sale is a MicroStep MasterCut 6001.20PG CNC plasma/oxyfuel cutting system with a working area of 6,000 × 2,000 mm, manufactured in 2025. Equipped with a Kjellberg SmartFocus 300 fine plasma power source and an additional fully automatic oxyfuel cutting system. The system is designed for processing steel, stainless steel, and aluminum. Key technical specifications: - Working area: 6,000 × 2,000 mm - Plasma: up to 80 mm - Oxyfuel: up to 200 mm - Kjellberg SmartFocus 300 Amperes - Fully automatic plasma support Gsdsz Hcr Dspfx Ad Rsui - Fully automatic oxyfuel support - Automatic gas consoles - Elevated gantry design - Smart Z movement - Active collision protection - MicroStep control with 24" touchscreen - Asper Basic 2D CAD/CAM - RemoteDiagnostics Included with the system is a Donaldson DFPRE 4-R filter/extraction system with 9.0 kW. The extraction system is explosion-proof and equipped with appropriate ATEX features, making the system suitable for cutting aluminum. The machine has been used very little and is in good condition. Inspection and demonstration under power are possible by appointment.

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 61108042022, 5-axis CNC tube bending machine BLM Dynamo ELE - MR200 Serial number: 61108042022 Year of construction: 2008 Machine weight: 1850 kg BLM bar loader BLM CARM 7 Serial number: 340380106175 Year of construction: 2008 Weight kg: 650 Godpfxjqy E R Tj Ad Roui With conveyor belt Without protective grid

Condition: used, Year of construction: 2007, The Romaco Unipac U2080 is a versatile, high-performance tube filling and sealing machine designed for pharmaceutical, cosmetic, and chemical products. Operating at a mechanical speed of 80 tubes per minute, it features 9 stations and handles tube diameters from 10–50 mm and lengths from 60–220 mm, offering flexible, precise filling. Key Features and Technical Specifications: Gusdpfx Aeyvuhnod Rei Machine Type: Automatic tube filling and sealing machine. Capacity: Up to 80 tubes per minute (mechanical speed). Working Stations: 9. Tube Dimensions: Diameter: 10 – 50 mm. Length: 60 – 220 mm. Application: Suitable for liquids, creams, and gels for pharmaceutical and cosmetic applications, say Makinate and MLTC-Europe.

Condition: used, Year of construction: 2018, functionality: fully functional, Working area: 3000 × 1500 mm Design: Downdraft / fume extraction table Plasma source: Hypertherm Powermax65 Max. current: 65 A Plasma source power supply: 400 V / 3-phase Gujdpfsz Iniqjx Ad Rei Compressed air: min. ±5.9 bar CNC plasma cutting machine with automatic torch height control