Used Tube Plasma for sale (2,438)

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, control type: manual, degree of automation: automatic, actuation type: electric, pipe diameter (max.): 60 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 5 mm, bending angle (max.): 180 °, input voltage: 400 V, input frequency: 50 Hz, Equipment: emergency stop, It is a machine from 2018 and we used very little. Fedpfxoyvhl Hs Aanjpp We can bend pipe from 18 mm - 60 mm Machine cost new 2018 was ca 45.000,00 EUR and tools was ca 55.000,00 so total was EUR 100.000,00

Year of construction: 2018, condition: ready for operation (used), A Thermconcept high-temperature tube furnace is available. T. max.: 1700°C, heated length: 200mm, tube diameter/length: 60mm/600mm, power: 3.3kW, dimensions X/Y/Z: 460mm/530mm/830mm. Documentation available. Fpsdotxb Avspfx Aanop

Year of construction: 2020, condition: ready for operation (used), Treatment width: 8mm-12mm, max. plasma generator diameter: 32mm, plasma generator length: 210mm, cable length: 3m, inlet pressure: 5bar-8bar, gas consumption: approx. 2m³/h, generator power: 300W, frequency: approx. 40kHz, dimensions X/Y/Z: approx. 420mm/140mm/500mm, control: manual/semi-automatic, operating hours: 81h. Documentation available. On-site inspection is possible. Fedpfx Aajt I Tydjnjpp

Condition: ready for operation (used), Year of construction: 2017, A semi-automatic table-top tube sealing machine from Neweco is available. Tube materials: LDPE/HDPE/PE/PP/laminate, max. tube diameter: 50mm, max. tube length: 250mm, max. sealing capacity: approx. 720tubes/h, machine dimensions X/Y/Z: approx. 600mm/800mm/800mm, weight: approx. 70kg, estimated counter reading: approx. 80000tubes. Documentation available. An on-site inspection is possible. Fpodpfx Aaszpyymjnsp

Year of construction: 2014, condition: ready for operation (used), A complete CNC double gantry plasma cutting system Microstep with oxyfuel torch for nesting, bevel cutting and tube processing is available. 1) Plasma cutting system, max. processing length: 16500mm, max. processing width: 2500mm, max. processing width including shaft: 3700mm, max. material thickness VA/structural steel: 20mm/40mm, number of gantries: 2. Gantry 1: with a plasma rotator and a Kjellberg HiFocus 280i neo plasma cutting source. Gantry 2: fully automatic oxy-acetylene torch for possible equipment of a second torch carriage. Pipe cutting device: pipe diameter range: 30mm-700mm, max. pipe length: 16500mm, operating hours: approx. 15000h. 2) Filter system Donaldson Cyclopeel DFPRO 16, volume flow: 16000m³/h, filter elements: 16. Documentation available. On-site inspection is possible. Expected to be available from the end of 2025/beginning of 2026. Pictures are from commissioning in 2014. Fpsdpfxswmqwyj Aanop

Year of construction: 2010, condition: ready for operation (used), Max. sheet dimensions: 6050x2550mm, max. cutting speed: 10m/min, length: 8125mm, width: 3800mm, height: 1900mm, with documentation, an on-site inspection is possible. Fjdpfxori Skas Aanepp

Condition: ready for operation (used), Year of construction: 2011, A CNC 10 axis pipe cutting system HGG including a plasma source Kjellberg HiFocus 280i is available. Pipe diameter range: 30mm-330mm, max. pipe load: 20kN, max. pipe length: 13000mm, max. workpiece weight: 2000kg, max. cutting angle: 70°, max. plasma cutting current: 280A. Documentation available. An on site inspection is possible. Fpodpjytgpdjfx Aanep

Year of construction: 2010, condition: ready for operation (used), A plasma cutting system is offered. Cutting current: 20A - 130A, cutting voltage: 88V - 132V, supply voltage: 400V, max. current consumption: 46A, max. gas inlet pressure: 12bar, ignition voltage: 17kV, gas flow O2: 5300l/h, gas flow N2: 3300l/h, gas flow air: 3200l/h, protection class: IP22. Equipped with automatic gas console, plasma gas control PGC control unit, extensive hose package bundle, mobile machine frame. Machine weight: approx. 350kg, machine dimensions X/Y/Z: approx. 1100mm/700mm/1450mm. Inspection possible by arrangement. Fpsdpsy Tauhsfx Aanep

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, For sale is a fully procured, modular GMP process system for the production of C1-Esterase Inhibitor (C1-INH) from human plasma. The plant was professionally engineered, procured, and has successfully completed FAT, but has never been installed or put into operation. This is expressly not a used line, but a factory-new project and module package. Year of manufacture: 2020 Condition: brand new, in original packaging Operating hours: 0 Storage: temperature-controlled warehouse SCOPE OF SUPPLY (EXCERPT WITH QUANTITIES) Adsorption / Chromatography (Bay 2 & 3): - 2 adsorption lines (DEAE / QAE) - 2 buffer tanks - 2 pigging systems - 2 cooled transfer lines (pipe-in-pipe) - 4 filter press racks - 4 cooling cascades - 4 CIP loops Precipitation PRE: - 3 pre-precipitation tanks (incl. 1,000 L) - 3 main precipitation tanks - 3 CIP stations - 3 multi-layer filters - 1 vacuum station Buffer Preparation (Bay 2 & 3): - 6 buffer vessels (NaCl, DEAE, QAE buffer) - 6 temperature control skids - 4 media/WFI/CIP distribution units LEP 2.3 – Washing & Elution Solutions: - 2 washing solution tanks (up to 9,000 L) - 2 elution solution tanks - 4 temperature control units LEP 13 – Ammonium Sulfate System: - 1 preparation tank (3,500 L) - 2 storage/distribution tanks - Solid material crusher - Dosing & neutralization system - Heat-traced pipes Media Distribution: - 1 pharmaceutical NaOH 1M system - 1 technical NaOH 32% system - 1 acetic acid 60% system - Pump and dosing stations Additional Process Tanks: - >15 stainless steel tanks 316L (1,000–9,000 L) - Various skids, distribution and instrumentation units GMP & DOCUMENTATION - URS / requirement specifications per LEP - P&ID diagrams - Layout and sectional drawings - EMSR & instrumentation documentation - FAT documentation - Complete weld certification (digital) - Extensive photo documentation The project documentation is fully available both digitally and additionally physically archived, structured in 316 folders. Process control system connection with pre-configured MES interface is foreseen. Cleanroom integration according to specification. SALE Preferably as a complete system. Modular sale possible if the entire package is not sold. Suitable for plasma fractionators, biopharma manufacturers, CDMOs, or new site establishment projects. Availability: short notice Fpjdpoym Ayfsfx Aanep Inspection: by appointment Price: on request

Year of construction: 1990, condition: good (used), Offer 20191 Year of manufacture approx. 1990, overhauled in 2002 Technical data: - Bending capacity at 45 kg/mm² up to approx. Ø 25 x 3 mm - Bending angle selectable left and right - Hydraulic double-sided bending function - Hydraulic approach - Drive: 400 V / 11 kW - Space requirement approx. W 1750 x H 2200 x D 2300 mm - Weight approx. 1600 kg Fsdpfxjhrdmbe Aanspp - including: - Bending angle adjustment - Hydraulic tension - Bending tools

Condition: used, Year of construction: 2015, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 30 mm, input voltage: 380 V, cutting speed: 6,000 mm/min, total width: 4,850 mm, total length: 10,150 mm, table length: 6,000 mm, working width: 2,000 mm, compressed air connection: 8 bar, table width: 2,000 mm, cutting current: 260 A, positioning accuracy: 0.01 mm, working length: 6,000 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, type of cooling: water, height adjustment type: electric, input frequency: 50 Hz, Equipment: documentation/manual, double-sided, For sale: used AJAN CNC plasma cutting machine with water table. The table is filled with water to a set level and cutting takes place just above the water surface. The water captures fumes and dust and cools the workpiece, so no separate filtration system is needed. The machine is compact and takes up little floor space. The gantry has dual-side servo drive. AJANCAM nesting software is included free of charge. ⭐️ Manufacturer AJAN Elektronik (Turkey) ⭐️ 1st Commissioned December 2015 ⭐️ Table size 2000 × 6000 mm ⭐️ Plasma power source AJAN HP 260A ⭐️ CNC control AJAN own controller ⭐️ Nesting software AJANCAM nesting software – included free of charge + free updates in future. ⭐️ Cutting currents 30 A, 80 A, 130 A, 260 A ⭐️ Max. cutting thickness quality cut up to 30 mm ⭐️ Input voltage: 380 V ⭐️ Phases: 3 Fpodjy Annbspfx Aansp ⭐️ Frequency: 50 Hz ⭐️ Torch height control automatic ⭐️ Gas control automatic ⭐️ Condition in working order ⭐️ Price 16 500 EUR + VAT ⭐️ Transport and installation 5 500 EUR + VAT (in Baltics, Finland) ⭐️ Availability immediately ⭐️ Photos, layout, attached to this post ⭐️ video on request Need more information or a formal quote? please send a e-mail or give us a call.

Condition: as good as new (ex-display), Swift-Cut CNC plasma cutting machine, type 1250Pro WT with water table and marking unit Cutting area 1250 x 1250 mm with ESAB power source Technical data: Fpjdpfoy Sxvhox Aanjp - Cutting area for sheet metal formats up to 1250 x 1250 mm - Table dimensions 1980 mm x 1840 mm - Table weight 800 kg - Table capacity 160 l - Height 1500 mm - Z-axis travel 130 mm - Max. load capacity 200 kg/m² - Traverse speed 20 m/min - Guides: Hybrid servo motors and double-sealed linear bearings on all axes. - Closed ball screw-driven Z-axis. Double-driven Y-axis. - Bridge clearance 150 mm - Max. material thickness 25 mm - Max. cutting capability for square tubes 100 mm - Required compressed air pressure 7-7.5 bar - Flow rate 300 LPM - Linear positioning accuracy 0.5 mm/m - Repeatability 0.4 mm/m - Measurement of roundness tolerance 0.3 mm/m FURTHER DETAILS AVAILABLE UPON REQUEST.

Condition: new, Brass round tube / in-stock item, sold as a set. Outer diameter: 60 mm Wall thickness: 10 mm Inner diameter: 40 mm Length: 3,000 mm Material: Brass Ms 58/Cu Zn 39 Pb 3 / CW614N Condition: unused / in stock Available quantities: 1 x set of 7 pieces 3 x set of 10 pieces Fpodpjy Urxusfx Aansp 1 x set of 11 pieces Please submit your inquiry with the desired quantity.

Condition: used, Year of construction: 1994, Technical Specifications: - Manufacturer: IST - Year of manufacture: 1994 - Working width: 1300 mm - With 3D mirrors - Number of tubes (viewed from above): 1 - Tube positioned at an angle - Electrode spacing 1620 mm - Suitable for drying edges - Suitable for mercury and gallium tubes. - Tube power 80 W/cm - For mounting on an existing conveyor Fsdpfxezf N Tns Aanepp - Location: in storage - Volts, Hz 400 / 50 - Good condition

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Siemens, laser source manufacturer: Max Photonics, laser source model: Max Photonics 6kW mit CE, laser power: 6,000 W, sheet thickness (max.): 10 mm, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, pipe diameter (max.): 240 mm, pipe length (max.): 6,050 mm, working length: 8,050 mm, working width: 250 mm, working height: 250 mm, travel distance X-axis: 400 mm, travel distance Y-axis: 6,500 mm, travel distance Z-axis: 280 mm, feed rate X-axis: 116 m/min, feed rate Y-axis: 131 m/min, feed rate Z-axis: 30 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.05 mm, workpiece weight (max.): 100 kg, power: 6,000 kW (8,157.72 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, overall weight: 5,000 kg, total length: 12,500 mm, total width: 2,400 mm, total height: 2,550 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, With a fully redesigned machine concept, it unites maximum stability, highest efficiency, precise processing, and intelligent automation in one system. This makes it optimally suited for processing a wide variety of metal tubes and profiles – flexible, reliable, and powerful. A patented, innovative design combined with an exclusive automatic loading and unloading system significantly boosts productivity. The system operates faster, more stably, and more intelligently, and is available in different configurations to suit your individual requirements. Thanks to enhanced dynamics and increased performance, the machine delivers outstanding results across all processing operations – whether cutting, drilling, or complex contour cutting. The cutting quality is of the highest standard: smooth surfaces, minimal thermal impact, and virtually no residue or rework required. Fjdpfx Aaey R I R Eonjpp Numerous patented core technologies ensure consistently high processing accuracy and perfect results – even in demanding continuous operation. Even after many years of intensive use, the system’s performance remains at an exceptionally high level. This makes your investment a sustainable, future-proof solution for your production. Cutting power: 6000W Laser source: MAX Photonics Laser head: BOCI Autofocus Max. tube length: 6500mm Tube diameter: 240mm Acceleration: 1.2G

Condition: like new (used), Year of construction: 2022, Semi-automatic tube bending machine for tubes up to 30 mm with extended bending clearance, especially for meander bending Standard equipment: • Operation via Siemens Touch Panel KTP 600 • Function keys and plain text display for operator guidance • Program memory internally for 100 programs with 20 data sets each • Bending axis electronically controlled • Automatic bending angle adjustment • Target/actual value display for bending angle • Control panel swiveling • Bending head freestanding • Tube clamping hydraulically, clamping pressure adjustable • Guide block adjustment hydraulically • Bending mandrel extension hydraulically • Machine can be used in a mobile manner • Extended bending clearance for bending radii up to R max = 200 mm 1 TUBOBEND 30 with tube feed length 1,500 mm Technical data: Tube range up to: 30.0 x 3.0 mm (E 235 with Rm = 2xD) Bending radius up to: 200 mm Control: electronic Effective bending angle (max.): 180° (+10° overbending) Switch-off accuracy: ± 0.1° Bending speed (max.): 45°/s Dimensions L/W/H: 2200 / 600 / 1100 mm Weight: approx. 500 kg Power: 1.5 kW Connection data: 400 V / 50 Hz / 3 phases Mains fuse: CEE 16 A Color: RAL 5015 blue Optional equipment 1 piece. Length stop device, length 1500 mm 1 piece. Early mandrel retraction to optimize arc quality • For use with ball mandrels Fpsdpfozichajx Aansp • Mandrel is automatically retracted during the bending process • Adjustment up to 10° continuously programmable 1 piece. Automatic mandrel lubrication as a minimum quantity lubrication system Pneumatic dosing device HP-Microspray (compressed air connection required) 1 piece. Safety foot switch for clamping and bending function 1 piece. Adjustable bending speed Note/Remark: The tube is approximately 500 mm round at the beginning and end of the bend (tube and tool = Ø 33.7 mm). The tube is only flattened into a flat oval tube in the spiral. The spiral only has one bend at each end. Bending of return bends is not possible. Since the tube is round, a pre-rotation can be performed to compensate for the slope. The position of the bend or the spiral must be determined using an external device.

Condition: good (used), Year of construction: 1996, machine/vehicle number: 5090, Offer 22186 Technical data: - Bending capacity - Pipe at 45 kg/mm²: Ø 6 - 48 mm - Solid material up to approximately: 30 mm Fsdpfeztvgwsx Aanopp - Max. bending angle: 180° - Bending radius: 2 x D - Drive: 400 V / 1.5 kW - Space requirement: approx. W 4500 x H 1400 x D 1000 mm - Weight: approx. 600 kg - with: - Digital bending angle display + fine adjustment of the bending angle - Mandrel bending device, 3.0 m, with hydraulic retraction - Bending tools: 20 R 60; 22 R 66; 25 R 75 mm - 25 R 50; 38 R 114 mm - Various bending mandrels, length: 3000 mm

Condition: used, Year of construction: 2019, operating hours: 640 h, functionality: fully functional, Becky Job Master 6.20P CNC plasma cutting system Year of manufacture: 2019 Power source: Hypertherm XPR170 Machine software included, nesting software excluded Donaldson extraction system, 5.5 kW Fpedpfxjz Dr Rdj Aansp The machine is being sold due to the purchase of a laser cutting system.

Condition: used, TruPlasma DC 3050, TRUMPF DC plasma generator, Rev. V 03_00 Model: TruPlasma DC 3050 Fpedpfx Aorfb S Ueanjp Condition: Used

Condition: new, Year of construction: 2025, TR series is a laser pipe cutting machine focusing on heavy pipe processing, the use of traditional horizontal bed, high bearing capacity, with mobile gantry structure, can cope with a variety of complex cutting conditions, widely used in building beams, pipeline processing, steel structure industry. Big tube and profile laser cutting machine. Up to diameter H profile till 12 meter tube or profile lenght Fodpjmxl S Aofx Aanopp laser head depend on material thickness. Power: 3-12kW Max. Raw Material Length: 12500mm Round Tube Diameter: Φ70-Φ680mm Square Tube Side Length: □70*70-□480*480mm Max. Acceleration: 0.5G Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: used, Plasma cutting unit HYPERTHERM, Type Max 100 Plasma cutter with machine torch Machine No. 70-2513, Year of manufacture 1990 Power: 100 Amps = 80% duty cycle Fodoyah Saopfx Aanjpp 89 Amps = 100% duty cycle Cutting capacity: up to 32 mm material thickness Adjustment range: stepless Hose package length: 22 meters Compressed air connection: 4.7 bar Mains connection: 400 volts, 50 Hz, 63 Amps plug - Hose package with machine torch (hand torch without switch) - Spare nozzles for the plasma cutting torch - Separate push button switch for starting the plasma cutter Space requirement L x W x H: 850 x 700 x 1100 mm Weight: 225 kg Good condition Ideal for retrofitting to an oxy-fuel cutting machine.

Condition: used, Manufacturer: Hanovia UV Model: PMS150G4/4 Type : Ultraviolet disinfection system Fjdpfx Aasx R A Ilsnepp Application: Ultraviolet (UV) water/liquid treatment Pressure rating: 7 bar Maximum pressure loss: 0.15 bar Maximum flow rate: 133 L / min - 8 m3/hour Temperature: 80°C

Year of construction: 1989, condition: good (used), Operating hours: 17 Machine number: 160973 Power: 4,500 W Voltage: 220 V Fpodpfxjbfa Hwe Aanjp No-load voltage: 320 V Current: 16 A Insulation class: F Cooling type: F

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Bodor, laser type: fiber laser, laser source manufacturer: Bodor, Effective Tube Cutting Length: 6500mm/9200mm Laser Output Power: 6000w/3000w/2000w/1500w Effective Round Tube Cutting Diameter: Φ20-230mm Effective Square Tube Cutting Diameter: □20*20-□160*160mm Edge Length: 20-170mm Fpsdpfxsg Rguce Aanjp Outer Circle Diameter: ≤230mm Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Warranty: 3 years Power supply: 110V/220V/380V 50Hz/60Hz 1.Bigger than Bigger The maximum cutting diameter of T series is 30%longer than the mainstream products in the market ; The maximum cutting weight is 100% heavier than the mainstream products in the market. 2.Chuck position control, torque control function The position control CNC self-centering chuck with independent intellectual property rights can automatically clamp material according to the input tube size; Position monitoring in torque mode to ensure that the thick tube is not loosened and the small tube is not deformed;Brand new dust-proof structure, long-lasting use without lagging. 3.Edge-seeking, center-finding Brand new function of edge-seeking, center-finding. Optimized edge-finding method and algorithm, higher cutting precision and stability

Condition: new, Year of construction: 2024, Tube and Flat-Bed Laser 4 kW | Combination Unit HD-F 3015 BH Laser Combination Machine Machine Dimensions: • (L x W x H) 9,350 mm x 3,800 mm x 2,300 mm, length including filter 5,300 mm. Technical Details: • Max. sheet size: 3,048 x 1,524 mm • Max. sheet weight: 200 kg/m² • Laser power (IPG): 4 kW • Z-axis travel: 125 mm • Max. synchronous speed (X-Y): 141 m/min • Max. acceleration (X-Y): 10 m/s² • Positioning accuracy: ±0.05 mm • Repeatability: ±0.05 mm Cutting Range: • Steel: 20 mm Fedpfx Asfl T T Njanspp • Stainless steel: 10 mm • Aluminum (AlMg3): 12 mm • Brass: 10 mm • Copper: 6 mm Equipment: IPG 4000W fiber laser source (including cooler) Compact dust extraction (filter) for 4 kW Air conditioning unit in the control cabinet Flat-bed laser with automatic exchange table Laser cutting monitoring Automatic laser head positioning CE - exchange table with light curtain safety system Control system SIEMENS SINUMERIK 840D Auto-focusing Precitec Procutter cutting head F150 focus Flat-bed laser with exchange table (automatic pallet change system) Tube cutting device, side mounting, max. Ø400 mm Sheet metal inspection (automatic sheet metal position and size measurement system) Positioning laser diode Automatic nozzle cleaning Central lubrication Motorized chip conveyor Simple user interface, parameter page (power, speed, pressure) Software: Lantek or Metalix CAD/CAM software with automatic nesting Lighting for the work area Multi-chamber extraction system Warning light Special laser cutting options Positioning laser diode Piercing line (piercing settings) Focus line Plasma line Fast line Fly line Training support for CAD/CAM programming Application training Remote maintenance, by connecting to the machine, at no additional cost