Used Tubes for sale (1,974)

Condition: good (used), functionality: fully functional, motorized notching machine, 4 stations, drive power 2.2 kW Ledsz Smvgepfx Ah Sehn

Condition: used, Year of construction: 2015, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 119, inner diameter: 50 mm, cutting length (max.): 4,000 mm, Paper core production line with a packaging system for cores with an ID of 38-60mm, 12 layers for paper reels, multi-knife cutter (5 knives), gluing section with a heating system for dextrin adhesive. Very good condition – recently serviced. A large number of spare parts included. Lhodszul Sfepfx Ah Sen

Condition: used, Year of construction: 2005, functionality: fully functional, AXOMATIC OPTIMA 700 Semi-Automatic Tube Filling & Sealing Machine Compact and high-quality tube filling and sealing machine from AXOMATIC, Italy. The machine was previously used for filling and sealing plastic tubes and is equipped with a hot-air sealing system, volumetric piston dosing system, heated product hopper, and agitator. Manufacturer: AXOMATIC S.r.l., Italy Model: OPTIMA 700 Serial No.: 14027E 2005 Year: 2005 CE marked MAIN EQUIPMENT - Semi-automatic tube filling and closing machine - Currently configured for aluminum tubes - Rotary indexing table with 7 tube stations / holders - Manual tube loading - Volumetric piston dosing system - Stainless steel filling nozzle - Machine prepared for hot-air sealing of plastic tubes - Electrical connection for hot-air sealing head available - Hot-air sealing head currently not included / not available - Heated stainless steel product hopper - Separate temperature control for hopper heating - Product agitator - Automatic / continuous dosing modes - Automatic tube discharge - Stainless steel machine construction - Transparent safety guarding - Emergency stop and safety controls - Various format and spare parts available ELECTRICAL / UTILITY DATA Voltage: 400 V Frequency: 50 Hz Installed power: 8.5 kW Max. compressed air pressure: 6 bar Approximate air consumption: approx. 150 l/min Max. water pressure: 3 bar Approximate water consumption: approx. 2–3 l/min Noise level: < 75 dB Net weight: approx. 300 kg APPLICATION In its current configuration, the machine is equipped for filling and closing aluminum tubes. The machine is prepared for the installation of a hot-air sealing system for plastic tubes, including the corresponding electrical connection. However, the required hot-air sealing head is currently not available with the machine. CYCRON is presently in contact with AXOMATIC in Italy to clarify the availability of the original hot-air sealing head or a suitable replacement, as well as further technical documentation, spare parts, and the possibilities for completing the machine for plastic tube processing. CONDITION Used machine in very good and complete visual condition. Lhjdpfxjzyu R Uj Ah Sjn The machine is currently in storage and has not yet been function-tested by us. We are planning to prepare and set up the machine for a functional test and demonstration. Once completed, a functional test and machine video can be provided. The machine can be inspected by appointment. Several machine-specific format and spare parts are included / available. Exact scope will be documented before delivery. IMPORTANT Exact tube dimensions, dosing range, and production capacity depend on the installed format and dosing components and are currently being verified. Further technical information, detailed photographs, and documentation are available on request. Price: EUR 22,500 net negotiable, EXW Switzerland

Condition: used, Used scaffolding tubes – heavy-duty steel, various lengths Large quantity of used steel scaffolding tubes with a standard diameter of 48.3 mm. The tubes come from professional use and are in good technical condition, with normal signs of wear. Suitable for scaffolding construction, temporary structures, fencing, support, event construction, and various other applications. Specifications Type: Scaffolding tube / construction tube Diameter: 48.3 mm Material: Galvanized steel Condition: Used Stock location: Andelst, Gelderland Lhsdpfxj Aawums Ah Sjn Sale: Per length or per batch Available lengths: 1.00 m 2.00 m 3.00 m 4.00 m 5.00 m 6.00 m Other lengths available upon request Advantages Robust industrial quality Suitable for outdoor use Large quantities available in stock Suitable for various coupling systems Available per length or larger batch Suitable for export and resale Application Widely applicable for scaffolding construction, fencing, temporary structures, support, event construction, and other professional applications.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 3 - D Bending with fully automatic process controlled by NC Maximum pipe diameter: 50 mm Includes 3 bending dies: 26.9 mm, 33.7 mm, 42.4 mm Lsdpfx Aez Dntush Sshn Used very little, therefore in very good condition.

Year of construction: 2005, condition: used, functionality: unexamined, Two identical vacuum tube lifters from Schmalz, model JumboErgo 35, are for sale. Each unit includes a vacuum pump, control handle, hose package, and other accessories as shown in the pictures. These systems are suitable for the ergonomic lifting and moving of suitable wood panels, wood-based materials, and other flat components. The suitability depends on the material, surface, and the suction gripper used and must be checked before use. Technical specifications: Manufacturer: Schmalz Model: JumboErgo 35 Type designation: JUMBOERG35-DUMM Year of manufacture: 06/2005 Maximum lifting capacity: 35 kg Weight according to nameplate: 60 kg Includes vacuum pump Includes control handle and hose package Two identical units available Scope of delivery as shown in the photos Condition The devices were purchased by us as part of an industrial auction but were not subsequently used in operation. A complete functional test has not yet been carried out. The sale is therefore made in the existing, used, and untested condition. Signs of wear and tear due to age and use are present. An inspection and testing on-site is possible after prior appointment and is expressly desired. Price Price per unit: €1,500.00 net, negotiable plus 19% VAT = €1,785.00 gross Package price for both units: €2,800.00 net, negotiable plus 19% VAT = €3,332.00 gross The sale is made by a commercial seller. An invoice with VAT will be issued. Location: 35110 Vöhl-Altenlotheim Lhedpfxezyk R Ro Ah Ssn Collection and assistance with loading are possible by arrangement.

Condition: good (used), functionality: fully functional, Machine type: Tube laser cutting machine Manufacturer: Trumpf Model: TruLaser Tube 5000 Year of manufacture: 2008 Dimensions: approx. 16 m x 8.2 m x 2.8 m Weight: approx. 17,000 kg Condition: ready for operation (used) Lhodszrt Uiopfx Ah Sen Operating hours: 95,473 / 32,866 h (laser on / beam on; as of June 24, 2026) Main drive: 62 kW Laser power (max.): 2000 W Sheet thickness steel (max.): 8 mm Sheet thickness stainless steel (max.): 4 mm Sheet thickness aluminum (max.): 2 mm Travel range X-axis: 6,500 mm Travel range Y-axis: 200 mm Travel range Z-axis: 150 mm Tube diameter (round): 15 mm - 152 mm Tube diameter (square): 20 x 20 mm - 120 x 120 mm Tube diameter (rectangular): 20 x 20 mm - enveloping circle diameter x 150 mm Working length (automatic loading): 3,000 - 6,500 mm Working length (manual loading): Max. 7,500 mm Minimum remaining tube length: 141 mm Control: SIEMENS Sinumerik 840D Maintenance: Annual service by Trumpf HF driver stage renewed (09/2025) Push feeder renewed (07/2023) Equipment: LoadMaster Tube 6.5 m Layout plan (German) Operating manual (German) Stable machine frame with integrated laser unit Rotating and feeding station with self-centering clamping jaws Tube support, raw material with automatically retractable tube supports Push feeder with self-centering parallel clamping rollers High-precision drives Unloading station PRS 3001 with brush table, finished part length up to 3,000 mm Tube support, finished material with extendable guide rollers Closed beam guidance NitroLine (nitrogen is used as cutting gas) SprintLine (optimization of processing speed) Laser power control Programmable cutting gas pressure Automatic shut-off Work area lighting CO2 laser TruFlow 2000 High-frequency excitation Maintenance-free turbo radial fan Laser control TASC 3 Logbook function Laser cooling unit Laser cutting head with 5" lens Cutting head quick-change device ControlLine (collision protection) RJ45 network connection and floppy disk drive CE marking Multi-beam light barriers Monitoring system for gas pressure, temperature and coolant Extraction system, Handte Micropore filter type MF-L Protective cabin with Makrolon panes Nozzles 0.8, 1.0, 1.4, 1.7, 2.3 Clamping jaw sets D 20-85 mm and D 85-150 mm V-shaped molds and guide rollers for round tubes Additional set for U-shaped molds and guide rollers up to enveloping circle diameter 90 mm instead of the standard 120 mm Scrap conveyor with container Loading unit for laser cutting machine Loadmaster Tube 5000 Year of manufacture 2008 Dimensions approx. 2.0 m x 1.95 m x 9.5 m Weight approx. 5,500 kg Ready for operation (used) 3,000 - max. 7,500 mm SIEMENS Simatic Annual service by Kaste

Condition: good (used), functionality: fully functional, Year of construction: 2009, Used tube bending machine from Jutec Type: 5000 Lodpsyfmwxjfx Ah Sjhn Capacity: up to approx. 40 mm Mandrel length: 4500 mm CNC controlled Automatic head Manually rotatable head with hydraulic clamping Incl. 3 sets of tools Year of manufacture: 2009 Very little used

Condition: used, functionality: fully functional, Year of construction: 1998, machine/vehicle number: 7385, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Transfluid, controller model: IPU 20, pipe diameter (max.): 648 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 3 mm, bending angle (max.): 180 °, bending radius (max.): 125 mm, bending radius (min.): 50 mm, working width: 6,000 mm, mandrel length: 5,500 mm, number of axes: 3, working height: 1,300 mm, table length: 7,000 mm, table width: 900 mm, table height: 1,300 mm, overall weight: 1,000 kg, total length: 7,000 mm, total width: 900 mm, total height: 1,300 mm, power: 5 kW (6.80 HP), input voltage: 400 V, input current: 25 A, input frequency: 50 Hz, type of input current: three-phase, oil tank capacity: 1,320 l, operating pressure: 200 bar, Equipment: documentation/manual, emergency stop, Bending software requires a new update. Bending mandrels are available, bending tools are not included. Lhjdpfx Ajxcxupjh Ssn

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 15 h, machine/vehicle number: 121282, BENDMAK PRO 120 – Hydraulic three-roll profile and tube bending machine | 2024 | only 15.5 hours of use We offer a nearly new hydraulic three-roll profile and tube bending machine, BENDMAK PRO 120, manufactured in 2024. The machine has been used only minimally. The control system currently shows only 15 hours and 27 minutes of machine operating time and 31 hours and 14 minutes of hydraulic operating time. Operating times can be verified directly on the machine's display – see photos. The machine is fully functional, in very good technical condition, and ready for immediate use. The sale includes an extensive set of interchangeable rolls/tools for bending various profiles and tubes, as shown in the photos. Technical data: Manufacturer: BENDMAK Model: PRO 120 Year of manufacture: 2024 Serial number: 121282 Machine operating hours: 15:27 h Hydraulic operating hours: 31:14 h Type: hydraulic three-roll profile bending machine Shaft diameter: 120 mm Working roll diameter: 390 mm Motor power: 11 kW Power supply: 400 V / 50 Hz Weight: 4,720 kg CE Equipment and accessories: hydraulically controlled lower rolls hydraulic side guide rolls drive for all three rolls separate mobile control panel touchscreen display multiple sets of interchangeable rolls/tools for various profiles and tubes accessories shown in the photos are included in the sale The machine can be inspected and demonstrated in operation on-site. Lhsdpfx Aozzkvpjh Sjn

Condition: like new (used), Year of construction: 2022, Semi-automatic tube bending machine for tubes up to 30 mm with extended bending clearance, especially for meander bending Standard equipment: • Operation via Siemens Touch Panel KTP 600 • Function keys and plain text display for operator guidance • Program memory internally for 100 programs with 20 data sets each • Bending axis electronically controlled • Automatic bending angle adjustment • Target/actual value display for bending angle • Control panel swiveling • Bending head freestanding • Tube clamping hydraulically, clamping pressure adjustable • Guide block adjustment hydraulically • Bending mandrel extension hydraulically • Machine can be used in a mobile manner • Extended bending clearance for bending radii up to R max = 200 mm 1 TUBOBEND 30 with tube feed length 1,500 mm Technical data: Tube range up to: 30.0 x 3.0 mm (E 235 with Rm = 2xD) Bending radius up to: 200 mm Control: electronic Effective bending angle (max.): 180° (+10° overbending) Lhjdpfx Ajzichajh Sen Switch-off accuracy: ± 0.1° Bending speed (max.): 45°/s Dimensions L/W/H: 2200 / 600 / 1100 mm Weight: approx. 500 kg Power: 1.5 kW Connection data: 400 V / 50 Hz / 3 phases Mains fuse: CEE 16 A Color: RAL 5015 blue Optional equipment 1 piece. Length stop device, length 1500 mm 1 piece. Early mandrel retraction to optimize arc quality • For use with ball mandrels • Mandrel is automatically retracted during the bending process • Adjustment up to 10° continuously programmable 1 piece. Automatic mandrel lubrication as a minimum quantity lubrication system Pneumatic dosing device HP-Microspray (compressed air connection required) 1 piece. Safety foot switch for clamping and bending function 1 piece. Adjustable bending speed Note/Remark: The tube is approximately 500 mm round at the beginning and end of the bend (tube and tool = Ø 33.7 mm). The tube is only flattened into a flat oval tube in the spiral. The spiral only has one bend at each end. Bending of return bends is not possible. Since the tube is round, a pre-rotation can be performed to compensate for the slope. The position of the bend or the spiral must be determined using an external device.

Condition: good (used), pipe diameter (max.): 30 mm, input voltage: 380 V, Tube bending machine Brand: Margua Model: CEM-30 Maximum bending capacity: 30 x 1.5 mm Maximum square tube capacity: 25 x 25 x 1.5 mm Maximum center radius: 115 mm Minimum inner radius: 25 mm Motor power: 4 HP (Three-phase 380V) Tube accessories: - Dies for 22mm tube - Dies for 28mm tube - Dies for 20.5mm tube Lhjdpfx Asz Dti Ieh Ssn Drive and control: Electromechanical with angle selector and mechanical stop. Bending system: Die-forming draw bending (with or without mandrel).

Condition: new, New steel scaffolding tubes – various diameters and lengths Lodpfx Ao Aaxixsh Sshn New steel scaffolding tubes in various diameters, suitable for a wide range of structures and custom applications. The tubes are available in a standard length of 6.00 meters and can be precisely cut to size upon request. Suitable for light constructions, frames, furniture, railings and various other professional and private applications. 🔧 Specifications Material: Steel Finish: Galvanized Condition: New Standard length: 6.00 m Customization: Available cut to size Available diameters: Ø 21.3 mm – wall thickness 2.0 mm Ø 26.9 mm – wall thickness 2.6 mm Ø 33.7 mm – wall thickness 2.65 mm Ø 42.4 mm – wall thickness 2.65 mm Ø 48.3 mm – wall thickness 3.25 mm Ø 60.3 mm – wall thickness 2.9 mm Custom lengths: From 50 mm to 6000 mm ✅ Advantages New material Available in multiple diameters Standard available in 6 meters Can be cut to the desired length Galvanized finish for extra durability Versatile for various constructions Application Suitable for frames, furniture, railings, light constructions and other custom projects where a strong and durable steel tube is required.

Condition: good (used), pipe diameter (max.): 25 mm, pipe length (max.): 2,500 mm, bending radius (max.): 180 mm, CNC Tube Bender Brand: StarBend Model: STAR 250 CN3-PC-S Year: 2007 Serial Number: 072500924 Lodpfx Aoz E U Stsh Sehn Type: High-precision CNC tube bender Features: - CNC control with integrated PC - 3 numerically controlled axes - Y-axis (Bending): Controlled by a brushless servomotor - X-axis (Feed/Advance): Controlled by a brushless servomotor - Z-axis (Spatial tube rotation): Controlled by a brushless servomotor. - Tube bending with high repeatability - Max. tube diameter: 25mm (Tube wall thickness of 1.5 to 2.5mm depending on the radius) - Usable length over mandrel: 2,500 mm - Maximum bending radius: 180 mm - Programming by bending sequences - Program memory - High productivity in series production - Pneumatic internal mandrel extraction and insertion. Available Bending Kits: - TUBE 28mm Radius 61mm - TUBE 15mm Radius 35 - TUBE 22mm Radius 36mm

Condition: used, Year of construction: 2005, table length: 6,000 mm, total length: 6,000 mm, input voltage: 400 V, Ercolina EB 45 with tooling for inch-sized pipes Ledpfx Ahsyr H A Is Sshn Inspection and demonstration possible by appointment.

Condition: used, functionality: unexamined, Year of construction: 2006, machine/vehicle number: 109, control type: NC control, actuation type: hydraulic, controller manufacturer: siemens, pipe diameter (max.): 80 mm, pipe length (max.): 4,500 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 180 °, overall weight: 1,500 kg, Equipment: CE marking, emergency stop, Tracto Technik mandrel bending machine TB 80 L Year of manufacture 2006 with bending tools 11/4", 11/2", 2" gas with mandrel rods and mandrels Tube feed length 4500 mm Bending direction: right Bending capacity up to tube 76.1 x 4.0 mm Maximum bending radius 200 mm Lodpez Rn Srefx Ah Sehn Electro-hydraulic drive 3.5 kW 400 volts 50 Hz 3-phase Overall length 5615 mm Weight 1500 kg Freestanding bending head for maximum bending freedom Electronic bending axis control via touch panel, with setpoint/actual value display, automatic angle adjustment and memory function Tube clamping hydraulically, clamping pressure adjustable Glide block adjustment hydraulically Glide block unit rotating (glide guide) Bending mandrel extraction hydraulically Machine is mobile and can be used flexibly

Year of construction: 2021, operating hours: 1,800 h, condition: used, functionality: fully functional, clamping diameter: 200 mm, laser power: 3,000 W, machine/vehicle number: WS-13.04.2021-31-F, laser source manufacturer: Raycus, We offer this used Weni Solution WS6020TL tube laser, manufactured in 2021. Lhsdpfx Ahjzdza Re Sen Brand: Weni Solution Model: WS6020TL Laser power: 3000 W Working area: 6000 × 200 mm Year of manufacture: 2021 Input voltage: 400 V/50 Hz ±5% Weight: 3000 kg Power consumption: 27 kVA Matching extraction system also available. Inspection and functional testing before purchase are highly recommended (dismantling on 07/06/2026). Sale exclusively to businesses, excluding any warranty, guarantee, right of return, or conversion, to the extent permitted by law. The machine is sold in its current condition (“as inspected” or “as is”). Information on technical data, condition, operating hours, accessories, and possible applications is provided to the best of our knowledge, but without any guarantee of completeness or accuracy. The buyer is responsible for transport, installation, commissioning, maintenance, compliance with all safety regulations, and official requirements, as well as the intended use of the machine. Any claims arising from product liability, manufacturer’s warranties, or services are subject exclusively to the terms and conditions of the respective manufacturer. The transfer of risk occurs upon collection of the machine (EXW). If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 1995, Buigmachine voor buizen van MARK / Ridgid Type: 2H B Zonder gereedschap Lodozulzgspfx Ah Sohn

Condition: used, functionality: fully functional, Year of construction: 2016, Combined profile and tube bending machine Manufacturer: Italy For round tubes up to 48 mm 1st station for ring bending for large radii 2nd station for tube bending up to max. 180 degrees Electrically driven Motor: 1.1 kW, 400 V, 50 Hz, 3-phase With digital display With foot pedal Lsdpfx Aey Ryfnjh Sehn With tooling for 42.4 mm tube, radius approx. 150 mm Weight approx. 350 kg

Condition: ready for operation (used), Year of construction: 2017, A semi-automatic table-top tube sealing machine from Neweco is available. Tube materials: LDPE/HDPE/PE/PP/laminate, max. tube diameter: 50mm, max. tube length: 250mm, max. sealing capacity: approx. 720tubes/h, machine dimensions X/Y/Z: approx. 600mm/800mm/800mm, weight: approx. 70kg, estimated counter reading: approx. 80000tubes. Documentation available. An on-site inspection is possible. Lodpfx Ajzpyymsh Sshn

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 102075501_20, The machine has only been set up and tested – never put into production. Equipped with SDX dosing system. Includes format sets for 500 g and 1000 g sugar packaging. Lhedpfxjx A Trio Ah Ssn

Condition: like new (used), Year of construction: 2022, controller model: Siemens Touch Panel KTP 600, bending angle (max.): 180 °, bending radius (max.): 200 mm, overall weight: 500 kg, power: 1.5 kW (2.04 HP), No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bending direction: right Tube diameter steel: 4–28 × 3 mm Tube diameter non-ferrous metals: 4–35 × 2 mm Bending radius: max. 200 mm Bending height: 25 mm Bending speed: up to 45 °/s Effective bending angle: up to 180° + 10° overbending Switch-off accuracy: 0.1° Tube feed length: 1,500 mm MACHINE DETAILS Control: electronic Control model: Siemens Touch Panel KTP 600 Bending axis: electronically controlled Bending angle switching: automatic Program memory: 100 programs with 20 data sets each Target/actual value display for bending angle Tube clamping: hydraulic Clamping pressure: adjustable Slide block positioning: hydraulic Bending mandrel retraction: hydraulic Pump type: HD gear pump Pump capacity: 4.5 l/min Hydraulic pressure: 180 bar Bending head: free-standing Control panel: swiveling Machine design: mobile Maximum sound level: approx. 78 dB(A) Drive type: electro-hydraulic Drive power: 1.5 kW Mains voltage: 400 V Frequency: 50 Hz Phases: 3 Control voltage: 24 V DC Electrical standard: VDE Protection class: IP54 Lhedpfx Ahozzlc Rj Sen Dimensions & Weight Dimensions (L x W x H): 2,200 x 600 x 1,100 mm Weight: 475 kg EQUIPMENT Siemens Touch Panel KTP 600 Function keys with plain text display for operator guidance Automatic bending angle switching Target/actual value display for bending angle Swiveling control panel Free-standing bending head Hydraulic tube clamping with adjustable clamping pressure Hydraulic slide block positioning Hydraulic bending mandrel retraction Mobile machine design The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty or guarantee. The information on the technical data is based on the original offer. No guarantee is given for printing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, control type: manual, degree of automation: automatic, actuation type: electric, pipe diameter (max.): 60 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 5 mm, bending angle (max.): 180 °, input voltage: 400 V, input frequency: 50 Hz, Equipment: emergency stop, It is a machine from 2018 and we used very little. We can bend pipe from 18 mm - 60 mm Machine cost new 2018 was ca 45.000,00 EUR and tools was ca 55.000,00 so total was EUR 100.000,00 Lhsdpoyvhl Hefx Ah Ssn

Condition: used, This listing is for a Qiagen Biorobot 8000 Tube Holder STS MDx 9mm box of 14 Ljdpfx Asxzg N Sjh Sohn

Condition: good (used), Year of construction: 1996, overall weight: 1,000 kg, total length: 3,500 mm, total width: 1,000 mm, total height: 1,200 mm, Pipe bending machine with electric control, 4-fold bending angle pre-selection and digital display  Hydraulicbendingdriveoperatedbyhandlevervalve Hydraulic bending drive, operated by hand lever valve Follower-type pressure die (sliding guide) Hydraulic mandrel retraction Pipe circular saw with coolant lubrication and automatic feed Pipe deburring unit for internal and external deburring Hydraulic power unit as basic seating for attaching a cutting ring assembly or flaring device  Machine mobile and flexible to use Lhjdpst Dk Uksfx Ah Son Max.Tube Ø: 42mm Min. Tube Ø: 6mm Max. Wall thickness:3mm Max. Bending radius:5mm Min. Bending radius:180mm Max. bending length:2000mm Deburring attachment:Yes Sawing attachment: Yes Flair attachment: Yes Length: 3500mm Width: 1000mm Height: 1200mm Weight: 1000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!