Used Boiler Tube for sale (3,178)

Condition: used, Year of construction: 1993, functionality: fully functional, pressure: 96 bar, operating temperature: 525 °C, Boiler Type: Stirred tube boiler with granulation chamber Serial Number: 3069 Year of Commissioning: 1993 Manufacturer: SCG Performance Characteristics: Guedewwtvtspfx Ag Njh Nominal Output Capacity: 100 t/h Economic Load: 85 t/h Minimum Stable Load: 60 t/h Efficiency: 89.1% Steam Parameters: Superheated Steam Pressure: 9.6 MPa Superheated Steam Temperature: 525°C Feedwater Temperature: 150°C Auxiliary Systems: Emission Control System: Type: Electrostatic precipitators Separation Efficiency: 99.9% Thermal Output: Rated Thermal Capacity: 77 MW

Condition: good (used), Year of construction: 2008, INSMAN FIELD CVA-IF-3 Steam Boiler water-tube type Gsdpfjwryazjx Ag Neuh Maximun continuous production 3000 Kg/h Power 2132 Kw / 1,825,000 kCal/h Maximum operating pressure: 29 bar Test pressure 37.7 bar Heating surface 133.56 m2 Total volume 4,381 m3 Max. temperature service 232.8 ºC DUNPHY Brand modulating type burner. Model TG 37 ZM LC PV. Natural gas power 500-2200 Kw Available documentation

Condition: used, Year of construction: 1999, functionality: fully functional, pressure: 96 bar, operating temperature: 525 °C, Type Stirred tube boiler with granulation chamber Serial Number / Year of Commissioning 3121 / 1999 Producer Vitkovice a.s. Ostrava Contractor of Boiler Greening (Year of Commissioning) PROVYKO, s.r.o. (2018) ČKD PRAHA DIZ (2016) Nominal Boiler Output 200 t/h Economic Performance 170 t/h Minimum Performance Without Stabilization 120 t/h Superheated Steam Pressure 9.6 MPa Superheated Steam Temperature 525 °C Feed Water Temperature 150 °C Gedpowwr Iusfx Ag Nouh Boiler Efficiency 91.2 – 92.6 % Dedust Removal / Permanent Operational Separability of Filters Electrostatic filters / 99.9% Rated Thermal Output 154 MW

Condition: excellent (used), functionality: fully functional, Year of construction: 2025, Bodor T230A-6.5-6Kw Bevelling Tube Fibre Laser Cutter New 2025 Purchased for new job which has fallen through but never used in production (install and setup/training only) Automatic bundle tube loader for 6500mm lengths Optional bevel cutting head included for bevel cuts in ±45 degrees Tube size range Ø25-356mm With Dust Collector With Air Compressor Gedpfx Asw H An Rjg Neuh Safety Light Guards and Internal Camera Manual Available Bodor Warranty

Condition: used, Year of construction: 2023, operating hours: 500 h, functionality: fully functional, power: 200 kW (271.92 HP), type of input current: AC, We are selling parts from a Steam Methan Reforming plant in Norway. In this case we have two heat exchangers and one electrical steamer from a company Boiler Tech in Norway. Documentation in the attachments Gujdoxg I A Ropfx Ag Neh

Condition: excellent (used), first registration: 03/2015, Gas tank tube semi-trailer used for compressed helium, hydrogen, Wasserstoff, methane, CNG. Tare: 29820 kg Volume: 20164 Liters Working pressure: 200 bar First approval: 06.03.2015 Gjdpfexm T Ixjx Ag Neuh We also have other tankers for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, LNG, Hydrogen, Methane Contact us for more information or a quote!

Condition: used, Tube forming mill OME 320x8mm (A3782) Tube forming mill OME 320x8mm (A3782) for tube production of 323mm maximum diameter and 8mm maximum wall thickness Make: Ome (Italy) Material: HR, CR, Galv Condition: New Tube Diameter: 168mm – 323mm Wall Thickness: 2mm – 8mm Direction: L-R Speed: 35 meters per minute FORMING MILL Pass N. 1 Driven Forming # 1 Pass N. 2 Driven Forming # 2 Pass N. 3 Driven Forming # 3 Pass N. 4 Driven Forming # 4 Pass N. 5 Driven Forming # 5 Pass N. 6 Driven Forming # 6 Pass N. 7 Side Idle Forming Pass N. 9 Driven Forming # 7 Pass N. 10 Side Idle Forming FIN-PASS SECTION, SINGLE POINT ADJUSTMENT Pass N. 11 Driven Fin Pass # 1 Pass N. 12 Side Idle Fin Pass Pass N. 13 Driven Fin Pass # 2 Pass N. 14 Side Idle Fin Pass Pass N. 15 Driven Fin Pass # 3 Pass N. 16 Driven Fin Pass # 4 SIZING SECTION Pass N. 26 Driven Sizing # 1 Pass N. 27 Driven Sizing # 2 Pass N. 28 Driven Sizing # 3 NDT Prueftechnik Pass N. 29 Driven Sizing # 4 Pass N. 30 Driven Sizing # 5 STRAIGHTENING AND SQUARING SECTION Pass N. 31 Idle Turkshead #1 Roll holder plates NOT available Pass N. 32 Idle Turkshead #2 Roll holder plates NOT available Pass N. 33 Idle Turkshead #3 Roll holder plates NOT available Pass N. 34 Idle Turkshead #4 Roll holder plates NOT available Tables and tools for rolls change ABB Motors Costamasnaga Reducers Centralized lubrication system Hydraulic Power Unit Complete Mill Portion Automation with diagrams (OTO MILLS/Elletre 2013) Complete hydralic system Fume and Vapors exhaust system with extraction hoods (EUROFILTER) Complete Zinc exhaust system (DONALDSON) Gjdoq Ul Rvopfx Ag Neuh

Condition: used, functionality: fully functional, Used Tube-Lock Tubes – Sustainable Construction Material for Facade and Renovation Scaffolding These used Tube-Lock tubes are the ideal building blocks for assembling Tube-Lock (facade and renovation) scaffolding systems. Their premium quality, galvanization, and standard 48.3 mm diameter ensure reliability on any scaffolding project. Available in various lengths, so you always have the right size for your setup. We stock 2 meter, 3 meter, and 4 meter lengths. Features & Benefits Wide selection: various tube lengths suitable for both large and small scaffolds High Tube-Lock quality: safe, durable, and easy-to-assemble tubes Weather-resistant: impact- and corrosion-resistant due to galvanization Flexible application: suitable for (facade) scaffolding, renovation, and custom construction projects Why choose used Tube-Lock tubes? Gedpow Nhm Nefx Ag Njuh Cost-efficient: less expensive than new tubes without compromising on safety Available directly from stock thanks to our large inventory in Andelst

Condition: used, -Fuel delivery system -Biomass combustion system -Hot water boiler -Ash removal system -Flue gases primary cleaning system -Stairs and service platforms -Draft fan - Automatic control system -Chimney -Circulation system and water treatment Main parameters and guarantee value are calculated according to fuel parameters: -Moisture 60-65 % -Ash till 8 % - Calorific value 7990 kJ/kg and 1907 kcal/kg Main parameters of the furnace 6000 K: - Maximal designed thermal output – 6.5 Mw - Maximum continuous rate – 6 MW - Furnace regulation range 20% - 100% - Volume of furnace- 31.6 m3 - Volume of combustion chamber – 24m3 - Grates area 12 m2 - Grates designed thermal load – 500 Kw/m2 - Combustion chamber designed thermal load – 250 Kw/m3 - Maximum temperature in the combustion chamber - 900°C Godpfx Agewfpwpo Nsuh The following kinds of biomass are accepted for combustion in the furnace: - wood chips – 100% - forest wood residues- 100% - saw dust – 100% (G15) - chunk peat – 100% - bark – 100%

Condition: excellent (used), Year of construction: 2018, 1 x Karpovicz 600L Boiler (KK/600A) (Late 2018). Located Wiltshire. Gedpfx Agswglbte Nouh

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, laser power: 12,000 W, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Supports 12m steel pipe cutting Equipped with fully automatic combined loading and unloading system One-stop intelligent loading, cutting and unloading, increasing production efficiency by 200% Supports multiple processes such as beveling, locking, cutting, punching, opening welding holes, cutting bolt holes, marking and marking Gjdpfx Agsw A H T Aj Njuh Laser power 12,000 W – 20,000 W X-axis travel 1,600 mm Y-axis travel 1,900 mm Z-axis travel 900 mm A-axis rotation ±90° C-axis rotation ±90° U-axis travel 30 mm V-axis travel 13,000 mm Positioning accuracy ±0.1 mm Max. workpiece section 1,000 × 400 mm Max. supported weight 5 T Supported profiles H-beam, channel steel, I-beam

Condition: excellent (used), Year of construction: 2006, High pressure gas used tube semi trailer for helium, hydrogen, oxygen, nitrogen, argon, methan, CNG Semi trailer SCHMITZ year 2006 Tare 7900 kg Bottles: Volume 17400 liters Working pressure 200 bar Gusdpfx Agjv N Ex So Njh Tare 16750 kg We also have other tankers for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, Hydrogen, Methane We would also be happy to provide you with a quotation or give you more information about other pressure vessels. To discuss the possibilities, please contact us by phone or e-mail.

Condition: used, Year of construction: 2006, API tube mill 355mm x14mm (A3801) is line to produce pipes for petrol industries so can be perfect solution for your company to grow up API tube mill (Made in China), Forming machine is made in Japan OD 114–355mm wall thcikness: 4-14.3mm steel grade: N80 tube length:6-15m standard: API 5CT N80 scope of supply: – slitting line; – tube mill; – two end facing machines; – two hydro testers; – 1 tube straightening machine, rolls (OD 114.3, 139.7, 219.1, 273.05, 323.9, 339.72 , 355.6mm) machine was made in 2006, stopped running in 2016. used seam annealer and HF welder, brand: Thermatool. Used slitter, Chinese brand. thickness: 4–14mm, N80, Q235, hot rolled steel. max coil width 1600–1700mm. 2+5 leveler DC motor: 55kw Guodpfov Hcwtox Ag Nsh slitter DC motor: 160kw scope of supply: – coil car; – uncoiler (with 4 colums); – hold down roll; – peeler table; 2+5 leveler; – shear; – conveyor and loop; – guiding device; – slitter; – tension unit; – recoiler with support arm; – coil car; – approximate 12 slitting blades; – electric cabinet, hydraulic system. slitter is for tube mill

Condition: used, Year of construction: 1997, functionality: fully functional, power: 1,000 kW (1,359.62 HP), Boiler with feed system - Year of release: 1997 - manufacturer: Komforts - Power 1 mW. Gujdpfxsv D Uz Ee Ag Njh - moving floor supply system with hydraulic station, - chimney, - pumps, - control, - hot water accumulator.

Condition: new, Year of construction: 2025, travel distance X-axis: 1,520 mm, travel distance Y-axis: 3,030 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 10,600 kg, total length: 10,100 mm, total width: 2,500 mm, total height: 4,500 mm, Max. Processing Size: 3000×1500 mm Gsdpsv Awlqsfx Ag Nsuh Max. Cutting Thickness： Can hold external diameter φ10-220mm (Recommended: round tube φ40-200, square tube: □40-200), weight 20Kg/m Pipe Cutting Type: 6 meters Automatic Chuck Max.m Synthesis Speed: 150m/min Acceleration: 2.5 G

Condition: new, Year of construction: 2025, pipe diameter (max.): 12,000 mm, travel distance X-axis: 12,000 mm, Equipment: cooling unit, safety light barrier, Three-chuck Heavy-duty Fiber Laser Tube Cutting Machine NS-12052HG 12000mm, 500 Chuck Servo drive is used for auxiliary feeding High-quality chuck Adaptive to different sizes of tubes Godpfsv D Uhfex Ag Neuh Servo control, excellent performance Give the equipment ultra-high dynamic performance Auxiliary feeding system Reduce work intensity and improve efficiency More types of processed tubes Support flying cutting High-precision Z-axis control Bevel cutting Highly automated ≤2m workpieces are unloaded through servo flaps

Condition: new, functionality: fully functional, Year of construction: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Series: NS-HG Gedpfoww Upzsx Ag Nouh Type: Heavy pipe machine Beveling function: Optional Power range: Round pipe processing: 50mm~560mm Square pipe processing 50mm~560mm Chuck maximum 30r/min Machine weight: 29t Power specification: 380VAC, 50Hz Optional loading rack: Three-chuck chain automatic loading rack Optional unloading rack: Three-chuck chain automatic unloading rack Standard: System 5000A, including nesting, supports servo (beveling) Zero tail material rear card hollow dust removal Optional: Weld detection, safety fence (light curtain), radiation-proof glass

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, laser type: fiber laser, laser power: 3,000 W, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Type: Two chucks Groove function: Standard Power range: 3KW, 6KW Round tube processing range: 10mm~160mm Square tube processing range: 10mm~160mm Chuck maximum speed: 130r/min Machine weight: 3T Power specification: 380VAC, 50Hz Gedewwz Dlspfx Ag Nouh Optional loading rack: G16pro-automatic loading, G16pro-semi-automatic loading Optional unloading rack: servo unloading rack, cylinder unloading rack Standard: System 3000DE-DH, including nesting, supports servo, dustproof (Y axis), dustproof (X axis), dustproof (Z axis), rear card hollow dust removal, short tail material Optional: safety fence (light curtain), radiation-proof glass

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, actuation type: electric, laser type: fiber laser, laser power: 20,000 W, input voltage: 380 V, input frequency: 50 Hz, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Equipment model: NS12056FG Guodpfsww Umaex Ag Noh Maximum length of pipe:

Condition: new, functionality: fully functional, Year of construction: 2023, laser power: 3,000 W, power: 3,000 kW (4,078.86 HP), input voltage: 380 V, input frequency: 50 Hz, type of cooling: water, total length: 6,000 mm, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, NS-6022HG Tube laser cutting machine 3kw 3 Chuck Professional Pipe Laser Cutting Machine with automatic loading system with 6m automatic unloading with Chinese 3D bevel head-BLT tubes T CE Anti-radiation glass Gsdpowu Rm Rjfx Ag Nouh protective guards AVR KIT OF NOZZLE, LENS ETC(SPCS FOR EACH) Series: NS-HG Type: Three chucks Groove function: Standard Power: 3KW Maximum pipe length: 7000mm Round pipe: Φ15mm-Φ220mm Square pipe: 15mm*15mm~150mm*150mm Rectangular pipe: 30*20mm~160*80mm Oval tube/flatoval tube: Short axis≥15mm, long axis ≤ 210mm Channel steel: Max20# I-beam: Max18# H steel: Max175*90mm Maximum acceleration: 1.0G Chuck maximum speed: 100r/min Machine weight: 10t Power supply specification: 380VAC, 50Hz Standard: Support servo (groove), dust prevention (Y axis), dust prevention (X axis), dust prevention (Z axis), safety fence (light curtain), zero tail material, cutting area dust removal, rear card hollow dust removal

Condition: used, Used GEMS approximately 56.8sqmt 316L stainless steel horizontall shell and tube heat exchanger. Unit has (260) 316L stainless steel tubes which measure approximately 19mm diameter X 3,650mm long 300 litre capacity, rated 9 bar design pressure at 80 deg.c. 316L stainless steel shell which measures approximately 500mm diameter X 3650mm long 420 litre capacity rated 2 bar/full vacuum design pressure at 120 deg.c. Unit has 316L stainless steel heads. Has bottom mounted support lugs. Last used as a shell condenser. Gujdpfx Agsxlgg Eo Njh

Condition: good (used), SOCO SB-63 Auto CNC Horizontal Hydraulic Tube Bender With Tooling Packages Diameter Of The Bent Pipe (Steel) Ø2.5-63.5mm. Diameter Of The Bent Pipe (Stainless Steel) Ø1.6-63.5mm. Single Travel 2,030mm. Bending Radius 250mm. The Length Of The Pin 3,200mm. Bending Angle 190°. Bending Speed 45°/sec. Feed Speed 700mm/s. Bending Accuracy +/- 0.2°. The Accuracy Of The Positioning Movements +/- 0.15°. Accuracy Of The Feed +/- 0.25°. Main Engine Power 10kW. Number Of Bends Per Pipe 15. Pipe Rotation Speed 120°/s. Weight 2,000kg. Tooling Packages 1 x Tool 1098 - Full Set Of Tools 19.05 x 1.63 x 30 C/L/R, 1 x Tool 1099 - Full Set Of Tools 13/8" x 1.63 x 45 C/L/R. Godpfxoxc H N Io Ag Njuh

Year of construction: 2019, condition: ready for operation (used), This Durma HD-TC60170 was manufactured in 2019. It features a 3kW IPG Fiber laser source, capable of 2.5D cutting, and handles up to 170mm pipes and 120x120cm tubes. It includes an exhaust system, spatter guard, bundle loader for serial work, and a chain loader for smaller jobs. The machine has a 6.5 meter inlet and a 4.5 meter outlet, extendable to 6 meters. Contact us for more information about this machine. Gujdpfx Agsxmbxrj Nsh Application Types Cutting

Condition: used, Used SRI BV approximately 3sqmt stainless steel vertical shell and tube heat exchanger. Has (27) 15mm inside diameter X 2,400mm long tubes 25 litre capacity rated -1.034/10 bar design pressure at 175 degC. 150mm diameter X 2,400mm long shell 26 litre capacity rated -1.034/10 bar design pressure at 175 degC. Unit has (2) bolted stainless steel heads. Mounted on (2) lugs. Last used as an beer column condenser. Gsdpfsxgftgjx Ag Nsuh Equipped With: Per RD 17/06/25 updated description & raised price.

Condition: used, Used Kleiser GmbH approximately 16sqmt horizontal shell and tube heat exchanger. Unit has (68) 316L stainless steel tubes approximately 3,000mm long x 25mm outside diameter, rated 6 bar design pressure at 100 deg.c. 316Ti stainless steel shell approximately 3,000mm long x 324mm diameter, rated 6 bar design pressure at 100 deg.c. (2) 316Ti stainless headers. Unit has 2 support mounts. Weight: Estimated: Kg 690.0 Equipped With: Per RD 16/06/25 on hold for Northern Lavender, UK. Gjdpfxexdw Hyj Ag Njuh