Used Turbine for sale (305)

Condition: new, Year of construction: 2024, functionality: fully functional, pressure: 16 bar, input frequency: 50 Hz, type of input current: three-phase, temperature: 400 °C, input voltage: 6,000 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, type of cooling: air, HOWDEN KK&K TWIN CA46 steam turbine with generator – 1.6 MW – NEW NEW | Never installed | Inspected by HOWDEN in July 2026 | OEM warranty reconfirmed | Immediate availability Available for sale: an industrial HOWDEN KK&K TWIN CA46 steam turbine, complete with a synchronous electrical generator, with a maximum electrical power of 1,595 kW (approximately 1.6 MW). The machine is NEW, never installed or commissioned, stored in a closed environment, and complete according to the original HOWDEN supply. Originally intended for an industrial project that was subsequently modified, it is now available for immediate delivery, without waiting for the production time of a new unit. HOWDEN INSPECTION AND WARRANTY On July 27–28, 2026, the turbine underwent a new inspection by the manufacturer, HOWDEN, who subsequently reconfirmed the official warranty until November 22, 2027. Original technical documentation and inspection photographs are available upon request. ECONOMIC TERMS – 40% DISCOUNT Reference value of the supply: €1,500,000 CURRENT PRICE: €900,000 The 40% reduction is motivated by the company’s need to free up the space occupied by the machine, following the modification of the original industrial plans. COMPOSITION OF THE SUPPLY HOWDEN KK&K TWIN CA46 steam turbine on a skid Integrated 3-shaft gearbox Synchronous electrical generator, supplied separately Lubrication and oil control system Control, control, and protection panels Original HOWDEN regulation and safety systems MAIN TECHNICAL DATA Turbine: Double-body HP + LP configuration Controlled steam extraction between HP and LP HP inlet pressure: 16 bar(a) HP inlet temperature: 400 °C HP steam flow rate: 10,000 kg/h LP inlet pressure: 2.4 bar(a) LP outlet pressure: 0.3 bar(a) Maximum mechanical power: 1,658 kW Maximum electrical power: 1,595 kW Gearbox outlet speed: 1,500 rpm Generator: Three-phase, brushless synchronous Rated power: 1,994 kVA Voltage: 6 kV Frequency: 50 Hz Air-cooled, IC31 Parallel operation with the grid Included systems: Oil system with main and auxiliary pumps Electronic regulator SC901 Siemens SIPROTEC 5 protection panel Independent overspeed protection Steam pressure and extraction control PROFINET interface ENC-RfG simulation model MAIN APPLICATIONS Biomass and waste-to-energy plants Industrial cogeneration (CHP) Revamping and repowering of existing plants STATUS AND CONDITIONS OF SALE Year of manufacture: 2024 Condition: NEW, never installed or started Last HOWDEN inspection: July 2026 OEM warranty reconfirmed until 11/22/2027 Immediate availability Location: Piedmont, Northern Italy Nedpfxe Afhgwo Ah Sjdc Conditions: EXW – ex works Visit and inspection of the machine by appointment PRICE: €900,000 (–40% compared to the reference value of €1,500,000) Original HOWDEN technical documentation and documentation of the latest inspection are available for interested buyers.

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: KT 615-7, pressure: 15 bar, power: 1,700 kW (2,311.35 HP), temperature: 325 °C, rotational speed (min.): 7,673 rpm, Steam turbine M+M Turbinen-Technik – 1.7 MW Industrial top quality For sale: Complete, high-quality industrial steam turbine installation from the renowned German brand M+M Turbinen-Technik GmbH. The steam turbine has already been dismantled by a specialized company. All necessary documents, manuals, diagrams, etc., are complete and available. Key specifications: Type: KT 615-7 Power: 1700 kW (1.7 MW) Year of construction: 2009 Speed: 7673 rpm Inlet pressure: 15 bar (abs) Outlet pressure: 0.1 bar (abs) Inlet temperature: 325 °C Description: This robust steam turbine is built according to German quality standards and guarantees high efficiency and a long service life. The installation is complete with control and measuring systems, valves, and piping, and was used in an industrial environment. The turbine is currently dismantled/disassembled in preparation (as shown in the photos), which simplifies transport and reinstallation. Ideal for reuse in a new installation or as an expansion of existing capacity. Advantages: Reliable and proven technology Ndjdpfjzbkgiex Ah Sjc Compact and powerful output (1.7 MW) Complete system (including control equipment) German top quality Suitable for various industrial applications Applications: Combined heat and power (CHP) Industrial power supply Waste heat recovery Process industry 📩 Interested or would you like more information? Please feel free to contact us for technical details, a viewing, or a customized quote.

Condition: used, Used Siemens type CFR5 G6A single stage gas expansion turbine. System rated approximately 60,000 Nm3/hr gas feed, 55 bar inlet pressure at 145 deg.c. Includes Loher type JKXK-560MR-04A generator rated output of 3035kW at 1509 RPM with connected power load of 2.8MW. Additional information available upon request. Ndodpfey Aaycsx Ah Sjc

Year of construction: 1994, operating hours: 43,200 h, condition: ready for operation (used), functionality: fully functional, water connection: 90 mm, machine/vehicle number: Nr. 377499, I am selling here a complete Pelton turbine with accessories, designed for use in a hydroelectric power plant with a power output of 7 kW. - Power: 7 kW - Type: Pelton turbine Ndjdpfx Ahez Rm R Hj Soc - Accessories included as shown in the photos - Robust structure for long-term use This unit is ideal for projects in the renewable energy generation sector. It shows the normal signs of wear and tear expected from a technical system of this type. The system is in perfect working order and ready for use. If you are interested or have any further questions, please do not hesitate to contact me.

Condition: used, Used Stainless Steel Millchem Dissolver type FMG25HD. Driven by a 22/15kW, 380V, 1500/750 rpm motor. Stainless Steel Turbine has a diameter of approximately 300mm. Supplied with (1) stainless steel tank with a capacity of approximately 1300 litres measuring 1180mm diameter x 1240mm. Nsdpfx Ahszd Urgj Sodc

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, !!! Attention!!! We buy your functional or defective Hobart pulping turbine, including accessories, and offer a repair service upon request. This is a pulping turbine from the premium manufacturer Hobart, model PVM 302. It is a mobile, versatile turbo mixer for pureeing, mixing, chopping, emulsifying, stirring, etc. Ideally suited for processing: vegetable, meat, and fish soups, sauces, vegetables (grated), mashed potatoes, yogurt, dressings, fruit and vegetable purees, liquid dough, baked goods, sorbets, and omelets. Compact dimensions and easy handling guarantee quick, cost-effective use even in confined spaces. The machine is equipped, as can be seen in the photo of the pulping head, with the PVM 302 sieve insert, 4 mm hole. The PVM 302 has an integrated safety feature that prevents automatic restart after a power failure or mains disconnection. An electrical safety device ensures that the mixing head can only be operated when it is set to a height of more than 300 mm or less than 900 mm. The PVM 302 has been completely overhauled in our in-house workshop, and the following parts have been replaced: flexible shaft / bearing shaft / mechanical seals / various ball bearings / 1 set of horizontal blades. The pulping turbine is now in top technical condition. The unit can be inspected and demonstrated in our workshop. Upon request, we can also send a video of the unit. The machine is available immediately. The fine sieve insert is included, as is a grease gun for regular maintenance. See photos! Manufacturer's list price = €32,945 NET You will receive an invoice with VAT shown. Our used equipment service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs High-quality brand-name equipment at fair prices Professional overhaul / inspection & expert cleaning tested & fully functional Shipping or self-collection can be flexibly chosen Competent advice - before and after the purchase Provision of operating instructions, wiring diagrams & spare parts Inspection according to DGUV V3 Technical data: Dimensions: in operation L x W x H = 1350x550x1500 mm in rest L x W x H = 1100x550x1700 mm Turbine speed / 1st gear 725 rpm / 2nd gear 1450 rpm Serial number: 94-842572 Year of manufacture: 2003 Condition: Used, overhauled, fully functional Machine design: Frame and all parts in contact with food made of chrome-nickel steel 18/9. The machine is mobile and equipped with 4 large rollers, two of which can be swiveled and locked. The machine is tilt-proof due to the rear outriggers. Ndodpezzw Ilefx Ah Sec Machine with high-performance turbine and vertical and horizontal blade set; good chopping and pureeing performance. Turbine with suction guard. Power transmission via flexible shaft. The machine has the GS/CE mark. Motor: Special motor, ball-bearing, with motor protection switch and robust on/off switch, suitable for continuous operation. Turbine with two speeds. I. gear 725 rpm (low speed) II. gear 1450 rpm (high speed) Motor with fan cooling, protection class IP 54 Total connection value: 1.85 kW three-phase 400V/50/3 Fuse: 3 x 10 amps.

Condition: used, Used Pfaudler BE5000 vertical glass lined reactor. Approximately 5,000 litre capacity. Internal rated 6.6 bar/full vacuum design pressure at -29 to 200 deg.c. External mild steel jacket rated 6.6 bar/full vacuum design pressure at -29 to 200 deg. Unit has welded dished top and bottom heads. Includes top entry 4-blade CBR Turbine type agitator driven by a 10.5 kw 415 volt 292-1460 rpm 3/50 motor. Unit is mounted on lugs. Specifications: Capacity: 5,000 L Internal Pressure: 6.6 bar Internal Temperature: 200°C Jacket Pressure: 6.6 bar Jacket Temperature: 200°C Legs/Lugs: Lugs Nsdpfxjykn Rdo Ah Sjdc

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 2109, pressure: 12 bar, power: 814 kW (1,106.73 HP), temperature: 192 °C, Fire-tube steam boiler HKB SHP 1250, 1250 kg steam/hour, 12 bar certified pressure, 814 kW. The listed price is for the boiler in its current condition, but we can offer various additional services. Such as: New insulation, control cabinet, overhaul and pressure test, burner and devices, installation, etc. Ndodjyu Ikxjpfx Ah Sjc

Year of construction: 2016, condition: new, functionality: fully functional, Location: Germany. Conservation, storage and supervision by Siemens AG Gasturbine Model: SGT5-4000F (8), new and unused Manufacturer: Siemens AG Year of manufacture: 2016 Frequency: 50 Hz Fuel: Natural Gas (NG) and DieselOil (DO) Guaranteed Performance Gross Power Output [MW]:298,2 (NG) –301 (DO) Gross Heat Rate [kJ/kWh]:8979,3 (NG) –9538,5 (DO) Generator: SGEN5-1200 A Includes: by-pass stack and diverter damper GasTurbine(GT) Auxiliaries Base module, comprising the auxiliary Fuel gas and ignition gas within separate compartment. Lube oil with plate type heat exchanger 2x100%. Hydraulic oil supply for valves and actuators. Hydraulic clearance optimization Natural gas Flow metering for performance test Naturalgas drainingsystem Njdpfx Ajz Sqbroh Sedc Dual fuel module, comprising the auxiliary packages Fuel oil (with 2x100% fuel oil pumps) Purgewater NOx (with 2x100% NOx water pumps) Sealing Air Supply system Advanced compressor cleaning system, including piping connection to cleaning water nozzle system GT Control System Control system type: SPPA-T3000 Turbine controller Redundant automation processor for closed-loop control functions I/O modules, as per I/O Turbine failsafe protection and trip system Failsafe system for protection and trip functions Turbine function group automatic and operational protection system: Redundant automation processor for open-loop control functions, sequence control functions and operational protection functions I/O modules, as per I/O I&C Cables: Turbine related special instrument cables at turbine and on skids (from sensor to junction box) Turbine related special control cables (flame monitoring cables) GT Systems Air intakesystem: • Filter systemwithpulsefilter stage • Inlet air filter house including weather Hood, bird screen weather Louvre, internal support structure, instrumentation, lighting, power sockets, access ladders, platforms and doors • Interconnecting duck work with expansion joint, manhole, damper and silencer • Ant-icingsystem • Electrical hoist for maintenance (250 kg) • DehumidifierforGT standstill • Nozzle system for compressor cleaning inside air inlet plenum Exhaust gas system: • Exhaustgasdiffuser •Compensator between GT and exhaust gas diffuser GT Electrical Equipment PowerControlCenter (UBA01/UBA02) AC Power Supply System (2) • Low voltage switchgear, AC MCC (BFE / BME) DC PowerSupplySystem: •DC Voltage distribution (BUB/BUC): 2 •Battery (BTA): 1 •Battery charger (BTL): 2 •DC/DC converter(BUK): 2

Condition: used, mileage: 252,000 km, power: 290 kW (394.29 HP), first registration: 04/2004, fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, gearing type: semi-automatic, emission class: euro3, Year of construction: 2004, Equipment: ABS, electronic stability program (ESP), * Mercedes Benz Actros 4140 RSP suction excavator * Registered: 04-2004 * EPS transmission * Drive: 8x4 * RSP ESE 32/7 S * Double turbine * 2 x remote control * LEAF SPRING SUSPENSION * More pictures and videos available via WhatsApp * Information subject to change without notice and prior sale. Ndjdjz Engdspfx Ah Sec

Condition: like new (used), Year of construction: 2017, operating hours: 1 h, functionality: fully functional, We offer refurbished turbines from a hanger-type shot blasting machine - Cogeim PG 10x15/2TR, year 2011. Shot blasting machine, sandblaster, blasting turbine, sand blasting, shot blasting. Ndodpfxey Nwq Se Ah Sjc

Condition: used, Year of construction: 2013, operating hours: 73,000 h, functionality: fully functional, power: 7,130 kW (9,694.09 HP), output frequency: 50 Hz, nominal power: 7,130 kW (9,694.09 HP), continuous power: 7,130 kW (9,694.09 HP), rotational speed (max.): 1,500 rpm, motor manufacturer: M+M Turbinen-Technik, Evaporation pressure: 21 bar Ndsdpez E Nh Nofx Ah Sec Steam pressure: 4.3 bar Temperature: Inlet 365 °C / Outlet 165 °C Generator: 8300 kWel Operating hours (annually): 8760 h/year Transformers included: Siemens Type 4GU6043-9HY Total operating hours: 73,000 h M+M turbines are typically custom-made industrial steam turbines used for combined heat and power (CHP) or for energy recovery from process steam. Due to the moderate inlet pressure and the relatively high outlet pressure, this is a back pressure steam turbine. It was designed for process steam systems to ensure efficient energy recovery and heat supply. The turbine was used in a paper mill to increase efficiency. With an output of 7.2 MW, this turbine is considered a medium-sized system in industrial applications. Thanks to the pressure ratios and the use of the turbine's exhaust steam, very little energy is lost. The estimated steam flow rate is 30 to 40 t/h. This enabled the paper mill to achieve an efficiency of 60% to 75%. The efficiency in CHP operation was approximately 75% to 85%. The turbine was designed for operation for 8,760 hours (full load year) with a maximum steam flow rate of 114 t/h. The turbine-generator unit supplies the paper machine with electricity at the 6 kV level. The process steam required for production is provided in two pressure stages. As the steam flows through the turbine, the steam pressure is reduced from 20 bar to 4.2 bar. If the turbine needs to be shut down for any reason, the process steam supply is provided via four pressure reducing stations connected in parallel.

Condition: ready for operation (used), Year of construction: 2005, A total of five identical Vestas wind turbines are expected to be available from early 2027. Rated power: 850kW, rotor area: 2124m², rotor blades: 3, rated speed: 26rpm, generator voltage: 690V, gearbox stages: 3, cut-in wind speed: 4m/s, rated wind speed: 16m/s, cut-out wind speed: 25m/s, tower material: steel, hub height: 74m, nacelle weight: 22t, rotor weight: 10t. Documentation available. An on-site inspection is possible. Individual sale possible. Nsdpeywlpxjfx Ah Ssdc

Condition: new, Elster SM-RI-X-E G1600 Turbine Gas Meter Elster Turbine Gas Meter Ndedpod I Tz Tsfx Ah Sec SM-RI-X-E-G1600-200-98.5-K (170) Qmax: 2500 m³/h Qmin: 130 m³/h Pmax: 89.5 bar No.: 10520813-2014 Pulse transmitter HF2 162.370 pulses/m³ Manufacturer's price: €21,540.00 net   You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2012, functionality: limited functionality, power: 45 kW (61.18 HP), Steam turbine Manufacturer: Siemens Ndodpfxex H Rwyo Ah Sec Type: AFA 2.5 Year of construction: 2012 Fresh steam pressure: 4.10 bar Fresh steam temperature: 153°C Fresh steam quantity: t/h Wheel chamber pressure: bar Wheel chamber temperature: °C Exhaust pressure: 0.90 bar Exhaust temperature: 140°C Electrical power: 45 kW Rated speed: 3,000 rpm Quick stop speed: 3,600 rpm Steam turbine with generator and vacuum condenser with pumps, without inspection, as is, without overhaul at current location. bps Consulting GmbH CONSULTING | PLANNING | SERVICE Steam turbines | Power plant systems and components info(at)bps-energie.de

Condition: excellent (used), Year of construction: 2003, operating hours: 8,000 h, functionality: fully functional, feed length X-axis: 3,500 mm, feed length Y-axis: 2,800 mm, feed length Z-axis: 1,500 mm, workpiece weight (max.): 35,000 kg, spindle motor power: 120,000 W, spindle speed (max.): 4,000 rpm, turning diameter: 4,000 mm, total height: 3,100 mm, rotational speed (max.): 180 rpm, workpiece diameter (max.): 4,000 mm, Equipment: documentation/manual, A STARRAG DORRIES 2VC2800/280MC-FC-V CONTUMAT High-Production 4/5 AXIS Vertical Turning Centre with Siemens 840D cnc This is not a machining centre with a turning table but a real high power, heavy duty vertical turning machine with the high power turning table on a massive base with guideways to provide a Y axis This configuration enables the machine to turn a round component to its maximum diameter and machine a square component to a similar dimension – and many more possibilities in between Nedpoy Uwg Rsfx Ah Sodc If a DS CNC swivelling head would be purchased from DS this machine is ready for huge 5 axis work. For large precise and complex components in these industries this is the perfect ‘one stop’ machine Defence, Aero Engine, Nuclear, Turbines, Rail, Oil and Gas, Pumps, Gearboxes, Rockets etc. 12 month guarantee. PAYMENT PLAN AVAILABLE

Condition: ready for operation (used), Year of construction: 2022, operating hours: 2,000 h, functionality: fully functional, type of input current: three-phase, input voltage: 6,300 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas H, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, Solar gas turbine Taurus 65 Solonox (6.3 MWe) ready for delivery. Ndodpfx Ahsytpbie Sjc Package description: Taurus 65 8401S (6.3 MWe ISO), Solar RGB & Leroy Somer 6.3 kV generator. Year of manufacture: Package 2011; gas turbine and gearbox replaced with new units in 2022. Engine starts: 14 / Package starts: 399. Running hours (gas turbine & gearbox): 2,423 hours. Location: Spain – unit stored at our indoor, temperature-controlled facility. The genset is currently available in our Zaragoza warehouse. Inspections welcome at any time. Scope of supply: - Main package in container, including: • SOLONOX Taurus 65 gas turbine generator (T65) – 2,423 operating hours • 6,300 V alternator • Control panels • Fire detection module • Gas train • Air inlet filter • Air outlet duct • Oil cooler • Gas compressor • 2 x gas storage tanks • Gas compressor cooler - Control system: • On-skid TTS4 Control System (Siemens S7 based) Available documentation: - Official borescope inspection report carried out by Solar following shutdown - Alternator maintenance report - Official Solar certificate confirming replacement of gas turbine and gearbox with new units in 2022 - Official data sheet for the complete package Additional information: - Most recent power generation: end of 2023 - Preservation: stored indoors in temperature-controlled building - Delivery: immediate

Condition: excellent (used), - Dimensions: 610x1150x1460 mm - Model: TRT 120 - Production per cycle: max. 20 litres + Mixing per cycle: 8 to 16 kg - Theoretical hourly production: 75 to 120 litres/hour Nedpjwxu Ruefx Ah Sedc - Operating ambient temperature: 16°C to 3°C - Air cooling - Pasto multifunction turbine - Weight: 510 kg - Voltage: 380V

Condition: excellent (used), Year of construction: 2017, We offer a table shot blasting machine TZS 1 Manufacturer: KOVO Staněk Table diameter: 1,100 mm Ndedpfxswurhio Ah Sec Year of manufacture: 2017 Weight: 2,500 kg Very good condition.

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: AC, overall weight: 5,180 kg, workpiece weight (max.): 1,800 kg, input current: 46 A, input voltage: 400 V, C.M. Wheel Blast Machine T18 H850 (Year of Manufacture 2016) Product Description The C.M. Surface Treatment T18 H850 is a high-performance wheel blast machine for the economical surface treatment of workpieces. The machine is suitable for descaling, decoring, cleaning, and surface preparation prior to painting or coating. The rotating table system allows a wide variety of workpieces to be blasted evenly. The robust design and powerful turbine enable high processing quality while simultaneously ensuring efficient abrasive consumption. The system features an integrated abrasive processing system with separator, cyclone extraction, and filter system. This ensures that the abrasive is continuously cleaned and reused. Electrical Data Feature | Value Mains Voltage | 400 V Phases | 3 Frequency | 50 Hz Maximum Power | 27.78 kW Installed Total Power | 24.82 kW Operating Current | 45.46 A Working Area Feature | Value Max. Workpiece Diameter | 1,800 mm Max. Workpiece Height | 850 mm Max. Workpiece Weight | 1,800 kg Wheel Feature | Value Power | 7.5 kW Wheel Diameter | 334 mm Number of Blades | 6 Peripheral Speed | 30–70 m/s Abrasive Feature | Value Usable Grain Size | 0.1–2.0 mm Maximum Hardness | 62 HRC Initial Filling | 1,500 kg Average Consumption | approx. 500 g/kWh Filter System Feature | Value Suction Capacity | 60–150 m³/min Compressed Air Consumption | 7.2 Nm³/h Filter Area | 75 m² Filter Weight | 1,100 kg Machine Weight Feature | Value Machine Weight | 5,180 kg Unladen Weight (Base Machine) | 4,080 kg Noise Level Feature | Value Sound Pressure Level (Leq) | 83 dB(A) System Components The system consists of: Cabin with rotating table Wheel Sieve Bucket elevator Separator Extraction system with cyclone Filter system Control panel / electrical system Application Areas Descaling Decoring Cleaning of steel components Surface preparation Removal of scale Preparation for painting or powder coating Shot blasting Special Features Ndsdpfx Ahez I Iv Rj Ssc Rotating table blast machine for large workpieces Closed abrasive system Automatic abrasive processing Integrated dust extraction with cartridge filter Robust industrial design Suitable for workpieces up to 1,800 kg

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: CP3T30-085AAV, Chicago Pneumatic Angle Turbine Grinder CP3T30-085AAV with autobalancer with spindle lock Nodpfx Ahoxwn R Ae Sedc Turbine grinder - twice the power with less weight! Ideal tool for grinding and smoothing cast iron, steel, welds, non-ferrous metals of all kinds and stones, e.g. in steel and container construction, mechanical engineering, foundries and reinforced concrete construction Specifications: Speed (idle): 8500 min-1 Max. power: 2.3 kW Air consumption under load: 1.92 m³/min Air consumption idle: 0.48 m³/min Weight: 2.1 kg Spindle Thread: M14 Air connection: IG 3/8" min. hose size at (5m hose length): 16 mm Required air quality: dried and oil-free

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, type plate available, SUPER PRICE!!! NOW ONLY 6,000 EUR!!! Taylor Hobson Talyrond 265 roundness measuring instrument. Extremely accurate; it can measure the roundness of lenses, optics, pistons, turbine components, tubes, shafts, and also eccentricity, e.g., of cams on a camshaft or journals of a crankshaft. It is certainly of interest to motorsport and tuning companies. The first photo is a "representative image" from a Taylor Hobson catalog, showing its basic structure, except for the computer. A newer, more modern HP computer with a small form factor is included. Max. diameter: 350 mm Max. test piece height: 500 mm (higher is possible, measured in two sections, up to a maximum of 1000 mm) Self-centering of the workpiece: +/- 5 mm Max. weight of the test piece: 40 kg The system has been used very little and has only had two owners. The original owner, from whom I purchased it, was an implant company in Hamburg. It was used there in a "medically clean environment" and is extremely clean. It was never located in a dirty machine hall. The year of manufacture is estimated to be between 2003 and 2005. The Taylor Hobson measuring software is, of course, included and runs on the supplied HP computer (without a password). It is also on the USB stick, perhaps to be installed on another machine at your location. Accessories are included: the original Taylor Hobson desk, computer, monitor, seven (7!) measuring probes, each of which is very expensive to purchase individually. A sample/pattern lens (hemisphere) for calibration is also included! The very detailed operating manual is on the USB stick, and all circuit diagrams and functional diagrams are also included! The system will be shipped on two Euro pallets via a freight forwarder. It is already securely fastened to them. The Talyrond 265 and the desk will be well-protected for transport with bubble wrap, etc., and wrapped with stretch film, and the system itself is secured with "transport safety screws." Shipping will be at the buyer's expense and will be carried out on two Euro pallets. Ndodpozcqy Eofx Ah Sec The measuring system should definitely be set up and put into operation by a Taylor Hobson service technician, who can then recalibrate the system on-site. This is now recommended after a few years. Errors can be made during setup and commissioning. For example, some locking screws are installed for transport, and if you forget to remove them, the system can be damaged when it starts up. A truly well-maintained, very accurate system that will continue to provide excellent service for many years to come!!

Condition: excellent (used), -Dimensions: 510x875x1400 mm -Serial number: 300758E -Condensation: Water -Refrigerant gas: 502 -Water-cooled compressor -Maximum gas pressure: 2000 KPa -Absorbed power: 2.55 kW -Maximum motor power: 1.90 kW -Protection: IP22 -Minimum water pressure: -Min: 200 (2 atm) -Max: 400 (4 atm) -Power: 5.60 kW Ndsdpfjwxu R Usx Ah Soc -Voltage: 380 V -Weight: 115 kg

Condition: used, functionality: fully functional, type of input current: three-phase, TECHNICAL SPECIFICATIONS: - Engine: 50 kW - Capacity approx.: 30,000 m3/h Ndedoxyirmopfx Ah Ssc - Motor speed: 2960 rpm - Impeller blade height: 230 mm - Impeller speed: 2350 RPM - Number of blades: 8 - Inlet diameter: 500 mm - Outlet dimension: 480 x 380 mm - Overall dimensions (L/W/H): 240 x 150 x 150 cm - Weight: ~600 kg

Condition: used, Year of construction: 2008, operating hours: 79,894 h, functionality: fully functional, pressure: 62 bar, power: 5,552 kW (7,548.61 HP), temperature: 480 °C, rotational speed (min.): 10,700 rpm, rotational speed (max.): 11,785 rpm, type of cooling: water, For sale: two complete GTA units (MAN turbine with heat extraction, gearbox, generator, lubrication systems, control systems, spare parts...). One GTA unit is designed for steam at approximately 52 bar and 450°C, the other for steam at approximately 62 bar and 480°C. Please contact us by email for any further information. Submit your offer per GTA unit. Ndjdpfx Aszdqmysh Sjc