Used Turn Plate for sale (23,431)

Condition: good (used), Clamping plate with T slots, T-slot plate, punching table, clamping plate, plate field, -T-slot plate: clamping plate with T-slots for hydraulic press, eccentric press -Clamping surface: 705 x 484 mm -Inner diameter: 250/220 mm -Plate height: 65 mm -Groove width: 22 mm -Dimensions: see drawing in the photos -Dimensions total: 705/484/H65 mm -Weight: 147 kg Iodpfxstnlz Hs Ag Nsih

Condition: new, Year of construction: 2019, sheet width 2050 mm plate thickness 2 mm strokes per minute until 38 cutting angle 1,75 ° table height over floor 870 mm total power requirement 3 kW weight of the machine ca. 1520 kg range L-W-H 2,2 x 0,6 x 1,2 m Demo machine at a special price: The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and emergency stop. • 2 cutting edges per knife. • Rear protective grille. Plus freight + packaging 270,--. This is a demonstration machine at a special price, so we are selling it without any warranty. Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm Isdpfsvn Al Hox Ag Nsih Machine dealer with own stock of 1600 m².

Condition: good (used), functionality: fully functional, Asymmetric 3-roll bending machine Plate roll-flanging machine BOMBLED - Model: 317 S Year: 1971 Maximum rolling thickness: 4 mm Maximum working length: 2050 mm Maximum flanging thickness: 3 mm Roll diameter: 153 mm Control: motorized Motor: 3 kW / 4 HP Iiodpoxn Tgwsfx Ag Njh Approximate weight: 2100 kg Dimensions: 3100x1100x1400 mm

Condition: used, functionality: fully functional, Year of construction: 2000, Equipment: CE marking, angle stop, emergency stop, finger protection, foot remote control, safety light barrier, Hydraulic Shear Brand: DURMA Type: DHGM3020 Sheet Length: 3000 mm Steel Thickness 37: 20 mm Voltage: 3x380V-50 Hz Ijdjxn Rhrepfx Ag Nsih Length: 4450 mm Width: 3850 mm Height: 2450 mm Weight: 20,000 kg

Condition: good (used), Year of construction: 2009, sheet width 3050 mm plate thickness 6.0 mm cutting angle adjustment 0.5 - 3.0 ° Iiedoxmakgspfx Ag Noh down holder 18 Stück no. of strokes 8 - 14 Hub/min back stop - adjustable 750 mm work height max. 770 mm Control SP 8 total power requirement 7.5 kW weight of the machine ca. 4800 kg. range L-W-H 3650 x 2100 x 1750 mm very little use (!!) from a maintenance workshop Features - Guide-railed electro-hydraulic guillotine shear - HACO control model NC SP 8 * Easy operation directly at the cutting table * Adjustment of cutting angle + backgauge * Retraction function from rear stop * Electric cutting length limitation * Emergency stop button, locking - Motor-adjustable and programmable rear stop - Electric/hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the front - 1x side stop - 1,000 mm, with scale & T-slot - Front finger guard - 1x freely movable foot switch - Rear safety guard + sheet metal chute - Operating instructions (PDF)

Condition: new, Year of construction: 2025, TBS - Manual plate shears Manual plate shears Suitable for cutting mild steel, aluminium, copper, zinc, plastics High quality cutting blades made of steel with a hardness of HRC55-60 Equipped with two operating handles Iodpfx Aocnxc Reg Noih With front support surface with scale and adjustable back gauge 800 mm table height Scope of delivery: 2 operating handles Model TBS 2000-12 Article no. 3746020 Technical data working width max. 2000 mm sheet thickness max. - material tensile strength 400N/qmm 1,25 mm backgauge range 0-300 mm weight 511 kg Dimension in mm 2450 x 1100 x 1050 mm

Condition: used, This listing is for the Biotek ELx808 Plate reader The unit is in full working condition and is ready for immediate use The BioTek ELx808 is a multi-channel absorbance microplate reader designed for high-precision optical density measurements in 96-well format microplates. Functioning essentially as a microplate-format spectrophotometer, the ELx808 measures light intensity as a function of wavelength—allowing for precise quantification in applications such as ELISA, endotoxin testing, enzyme kinetics, and microbial growth. This model is suitable for both research and development as well as diagnostic use, and is frequently employed across multiple disciplines including biology, chemistry, and nanotechnology. However, unlike some other microplate readers on the market, the ELx808 is specifically engineered for 96-well plates only and does not accommodate a broad range of labware. Iisdpfexhftvox Ag Njh

Condition: new, sheet width 2050 mm plate thickness 3 mm strokes per minute until 35 cutting angle 2,0 ° table height over floor 870 mm thickness at "Niro-steel" 2 mm total power requirement 4 kW weight of the machine ca. 1550 kg range L-W-H 2,5 x 1,57 x 1,21 m The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and emergency stop. • 2 cutting edges per knife. • Iiodevdfmxjpfx Ag Nsh Rear protective grille, warranty = 12 months for single-shift operation. Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm Machine dealer with own stock of 1600 m².

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table -Clamping plate: with support ribs, on a solid base frame -Clamping surface: 800 x 800 mm -Table height: 930 mm -Plate thickness: 25 mm -Transport dimensions: 800/800/H930 mm Iiodpfxjwclcie Ag Nsh -Weight: 235 kg

Year of construction: 2022, condition: used, New: Yes Colour: White Empty weight: 350 kg CE mark: yes Reference number: 1 Delivery terms: EXW Iijdpfeuighcox Ag Neh Production country: KR Please contact Ö. Inalkac for more information ACP5R is 350kg excavator mounted vibration plate compactor with hydraulic rotation. ACP5R is suitable for 6-12ton excavator. Available from Netherlands. Contact us for details. Verdichter, Compacteur, Puristin, Kompaktor, compactador, Zagęszczarka, Þjöppur, Komprimator, Цомпацтор, Συμπιεστής, Compattatore, Trilblok

Year of construction: 2018, condition: used, Serial number: 1302xxxx Iijdpfx Asvgzv Iog Nsh Please contact ATS Norway for more information Please provide reference number upon request: 19196 Description: Ammann 538 kg vibrating plate for sale. It has stood for less than a year since it was new and not used at all. Everything must work as it should Ready for delivery.

Year of construction: 2025, condition: new, NEW - - Ideal for removing plates from your standing plate storage. - For in-plant transport of the plates to the standing or lying panel dividing saw. - The steplessly height-adjustable support surface can be exactly to the height of your panel saw. Ijded Tyaaopfx Ag Njih height of your panel saw. - Panels weighing up to max. 250 kg can be transported or transported or swiveled by one operator alone. Technical data: Support height - standing: approx. 120 - 340 mm - lying: approx. 890 - 1200 mm max. plate size: 5200 × 2100 mm load capacity: 250 kg Location: ex stock 54634 Bitburg - immediately available- Will be shipped for 90,- Euro net within Germany

Condition: used, Electro sinus magnetic plate, sinus magnet, E-sinus magnetic clamping plate. Length: 255 mm, width: 130 mm, height: 120 mm. Voltage: 110 V DC. The magnet can be swiveled up to 90° and features a sinusoidal support surface. Net weight: 29 kg. Iiodpjxcimisfx Ag Noh

Condition: ready for operation (used), Year of construction: 2003, Control Unit Interface HSK 63 Brand OKUMA Model OSP-100L Iiodpfx Asxl H Hreg Neh Main Drive Number of axis 5 Tools Number of index 40 Max tool length 1500 mm Additional Equipment Autodoor This 5-axis Okuma MacTurn 350 was manufactured in 2003. It features an HSK 63 tooling system and can accommodate up to 40 tools. The machine includes an autodoor and supports a turning length of 1500 mm. Consider the opportunity to buy this Okuma MacTurn 350 Turn-mill centre machine. Contact us for more information. Application Types Turning

Condition: good (used), Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate -T-slot plate comes from: a WOTAN drilling machine -compatible with: Linear actuator ID 22786 Iedpfxed E Hk Ho Ag Njih -Travel: 1110 mm -Clamping plate: 1000 x 1260 mm (rotatable) -Plate is: Solid -Groove width: 21 mm -Dimensions: 2470/1070/H885 mm -Weight: 2200 kg

Condition: used, length 1200 mm width 500 mm floor-plate height 105 mm weight of the machine ca. 400 kg Electric magnetic plate from WAGNER, a transformer is required for operation / Iiodpfstq I Rqex Ag Neh Rectifier required. 110 volts, 2.86 amps. Machine dealer with own stock of 1600 m².

Condition: new, Year of construction: 2025, roller (bottom) diameter: 95 mm, roller (top) diameter: 95 mm, roller diameter: 95 mm, - Capacity 1270 x 3 mm - Conical rolling - Swing-out top roll Iedpexn Rrqjfx Ag Nsih - Foot pedal operation - Brake motor - Emergency stop - Documentation - 400V

Condition: good (used), Year of construction: 2005, Marking and surface plate 1000 x 1000 with base frame Iisdpfxewqx Axs Ag Noh Location: from stock 54634 Bitburg - available immediately -

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 20721 Ijdpfx Agewrl T Ts Njih Specifications: S70 mount, but a little wider For excavator Works as it should Weight: 645 kg 172 Bar Ready for delivery

Condition: ready for operation (used), Year of construction: 2002, Control Unit Ijdsxl H Hfspfx Ag Neih Brand MAZATROL Model PC-FUSION-CNC 640MT Main Drive Number of axis 5 Tools Number of index 40 Type of tool holder Capto C6 This 5-axis MAZAK Integrex 300-II Y was manufactured in 2002. If you are looking to get high-quality turning capabilities, consider the MAZAK Integrex 300-II Y machine we have for sale. Contact us for further details regarding this machine. Application Types Turning

Condition: used, functionality: fully functional, Year of construction: 1990, number of rollers: 3, roller (bottom) diameter: 100 mm, roller (top) diameter: 100 mm, side roll diameter: 100 mm, working width: 1,540 mm, sheet thickness steel (max.): 3 mm, overall weight: 785 kg, power: 1.1 kW (1.50 HP), Capacity: 1540 x 3,0 mm. Capacity with prebending: 1540 x 2,0 mm. Upper roll: Ø100 mm. Lower roll: Ø100 mm. Motor: 1,1 kW. Year: 1990 Country of origin: Sweden. Size (L x W x H): 2350 x 700 x 1050 mm. Weight: 785 kg. Asymmetric. With motorized bending roll with clock in hand wheel. All our used machines are tested and serviced before delivery. Ijdpfx Aoxphp Nsg Neih

Condition: used, Year of construction: 1967, total length: 3,500 mm, total width: 1,400 mm, total height: 1,600 mm, Empty weight: 4.500 kg Price: On request - Year: 1967 - Documentation available: No - Serial number: 3058 - Max. sheet thickness: 7mm - Top roll diameter: 220mm - Max. working width: 1500mm - Number of rolls: 3 - Control: Conventional - Transport dimensions: 3500mm x 1400mm x 1600mm (l x w x h) - Transport weight [kg]: 4500kg - Transport packages [pcs.]: 1 Financial information Iiedpfxsxhcgmj Ag Nsh VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Electro sinus magnetic chuck, sinus magnet, E-sinus magnetic clamping plate BRAILLON type BJP. Length: 350 mm, width: 150 mm, height: 110 mm. Connection: 110 Volt DC. Power: 0.65 Amp. The magnet is tiltable up to 90° and features a sine table base. Net weight: 45.8 kg. Isdpfx Aoxcimcsg Njih

Condition: excellent (used), Year of construction: 1995, Schroeder HS 2000/1.0 Manual Guillotine Shear Specifications: Manufacturer: Schröder Model: HS 2000/1.0 Year of Manufacture: 1995 Working Length: 2000 mm Cutting Thickness: 1.25 mm Collecting Tray Rear Paralleling Device via Handwheel Location: Arrives at Warehouse 54634 Bitburg - Available at Short Notice - Iisdpfx Aowhf Ntog Nsh

Condition: ready for operation (used), Year of construction: 2019, Control Unit Brand MITSUBISHI Model M730UM with CELOS Iedpfx Aoxlvb Seg Neih Main Drive Number of axis 4 Additional Equipment Full-closed loop control for x-axis Workpiece unloader including belt Automatic door Robot interface Bar Feeder interface 10 external M-codes Transformer Alternating speed option // High speed canned cycle option Island, open pockets option Addition of optional block skip option This 4-axis DMG MORI NLX 2500 SY / 700 was manufactured in 2019, featuring a Sauter turret capable of 10,000 rpm, dual spindle tailstock, high-pressure coolant system, and full-closed loop control for the X-axis. It includes interfaces for robots and bar feeders, enhancing automation and productivity. Consider the opportunity to buy this DMG MORI NLX 2500 SY / 700 turn-mill center. Contact us for more information about this machine. Application Types Turning