Used Turret Milling Machine for sale (64,972)

Condition: used, CNC Gantry-Type Boring and Milling Machine ANAYAK Type HVM-3800-P Bed type milling machine, structure similar to a plate-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 ("Refurbished 2025") The machine will be completely workshop overhauled in 2025 and can then be inspected in storage at 37235 Hessisch Lichtenau. Travel distances: X: 3,200 mm, Y: 1,200 mm, Z: 1,500 mm Table size: 3,800 x 1,200 mm T-slots: 8 pieces, 22 mm, spacing 130 mm Hsdpfx Aboxcgtgsvofd Table load: max. 25 tons (stationary table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar: DIN 69872-B) Spindle speed: 60 – 4,000 rpm, stepless Feed rate: up to 10,000 mm/min, stepless Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Electrical connection: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head fully automatic swiveling in two 45° planes – B+C axis - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF-spindle, 18,000 rpm – for attachment - Free-standing control cabinet - Chip conveyor positioned between the gantry bed and the machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic unit - Operating manual with circuit diagrams Installation area (L x W): approx. 1,000 x 700 cm Installation height: approx. 410 cm Weight (total): approx. 33 tons Good condition

Condition: used, Year of construction: 2009, spindle diameter 125 mm x-travel 1.500 mm y-travel 1.250 mm z-travel 1.000 mm w-travel 550 mm table surface area 1.000 x 1.250 mm workpiece weight 6.000 kg quill stroke 550 mm tool taper ISO 50 number of spindle speeds 5-3.700 U/min. max. torque 2012 Nm Hjdpfx Abjwdta Ejvefd feed speeds 1-6000 (x-Achse) mm/min feed speeds 1-6000 (y-Achse) mm/min feed speeds 1-6000 (z-Achse) mm/min rapid traverse x/y/z 15/ 15/ 15 m/min dimensions of the machine ca. 7,51 x 5,07 x 3,33 m 63 kVA Equipment/ Accessories: - CNC control Siemens 840 D - 60 ATC - Coolant system with high-pressure pump 30 l/min.- 20 bar - documentation

Condition: used, Year of construction: 1992, Vertical and horizontal milling machine Make: EUMEGA Type: MDV5 Year: 1992 Technical data: Make: Eumega Type: MDV5 Year of manufacture: 1992 Table size: approx. 305 x 1270 mm X-travel: approx. 460 mm Y-travel: approx. 500 mm Z-travel: approx. 610 mm Speed: variable Tool holder: SK 40 Total power: 3.75 kW Dimensions WxDxH: 1200 x 1100 x 1800 mm Weight: approx. 2.6 t All data without guarantee. A demonstration is possible at any time in our exhibition hall. Hfjdpfowncwhox Abvsd

Year of construction: 1984, condition: ready for operation (used), travel distance X-axis: 15,900 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 790 mm, overall weight: 23,000 kg, number of axes: 3, This 3-axis GRABENER Single-sided sheet metal edge milling machine was manufactured in 1984. It features a powerful 50 kW DC motor, spindle speeds up to 500 rpm, and a maximum torque of 2,000 Nm. The machine offers extensive travel capabilities with 15,900 mm on the x-axis and rapid traverse rates up to 8,000 mm/min. Ideal for precision milling with a swivel range of +/-45°. Contact us for more information about this machine. • Milling spindle swivel range: ±45° • Spindle and tooling • Milling spindle drive power (DC motor): 50 kW • Spindle diameter at front bearing: 160 mm • Internal tool holder: ISO 50 (DIN 2079) • External tool holder: ISO 60 • Tool clamping: manual via M24 threaded rod • Speeds and torque • Spindle speeds: infinitely variable, 2 ranges, 50–500 rpm • Range 1: 50–250 rpm • Range 2: 100–500 rpm • Stage increment: 1:2 • Constant power range: 160 rpm • Max spindle torque: 2,000 Nm • Max spindle swivel speed: 2°/sec • Feeds • Milling feed in X: 40–4,000 mm/min (infinitely variable) • Rapid traverse X: 8,000 mm/min • Adjustment speed Y/Z: 20–500 mm/min (infinitely variable) Hfedpfx Aox I S Rqjbvod • Rapid traverse Y/Z: 1,000 mm/min • Accuracy • Display/positioning accuracy (3 axes): 0.1 mm • Electrical • Operating voltage: 380 V, 50 Hz • Control voltage: 220 V • Distances and dimensions • Clamping table to retracted, horizontal spindle axis: 500 mm • Cheek support (floor) to spindle center in vertical center position: 1,300 mm • Clamping table to center of support guide: 2,300 mm • Length of cheek and support guide: 16,800 mm

Condition: excellent (used), Milling machine for wood Make SAC type ts 80 4 milling spindles : Speed : 2900 - 4000- 5800 - 8000 n1/min Milling cutter stroke 150 mm Table 1000 x 800 mm 3 roller feed unit make ELU infinitely variable speed Motor 380 Volt 2800 n1/min. 11,3 Ampere 5,5 kw Transport dimension : L.1020 mm W. 800 mm H.1650 mm, with pallet Weight 470 kg Hsdpfx Astyv Aaebvsfd

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -Power: 0.4 kW at 12000 rpm at 200 Hz -Power: 0.60 kW at 16500 rpm at 300 Hz -with indexable insert milling cutter -Number: 3x motors available Hjdpfx Asb A Igpsbvofd Price: per piece -Weight: 6 kg/piece

Condition: used, Year of construction: 2018, x-travel 670 mm Hfedpfx Aoyrhwajbvsd y-travel 820 mm z-travel 600 mm weight of the machine ca. 20000 kg

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, CNC travelling column milling machine | Manufacturer: ANAYAK | Type: HVM-6000-P | Year of construction: 2007 The machine can be inspected under power by appointment. Condition: Fully functional / ready for operation. Operating hours (as of 02.03.2026): - Control system on: 129.206 h - Machine on: 88.579 h - Programme run: 31.645 h - Spindle running time: 26.813 h TECHNICAL DATA Travel distances: - X-axis (longitudinal): 5.300 mm - Y-axis (transverse): 1.500 mm - Z-axis (vertical): 2.500 mm Table: - Table surface: 6.000 x 1.200 mm - Max. table load: 15.000 kg/m² Spindle taper: - Tool holder: ISO 50 Milling head – multi-angle, 45° (degrees): - Angle positioning: Automatic axes B and A - Speed with continuous change: 60 – 4.000 rpm Hfodpfeyry Rfex Abvsd Feeds: - Working feed: 10.000 mm/min - Rapid feed: 20.000 mm/min EQUIPMENT: - 2 x CNC control: HEIDENHAIN iTNC 530 - Tool changer, chain magazine 100 positions - 2 x Electronic Hand Wheel - 2 x Chip conveyors - External and internal coolant supply through the spindle - CE marking - Documentation No guarantee is given for the completeness and accuracy of the technical data and equipment. - Subject to prior sale – Detailed technical data sheet and information on equipment available on request.

Condition: ready for operation (used), functionality: fully functional, Kongsberg X24 Sign Starter (working area 1680 x 3200 mm) 1 x 97AR5620 X24 Sign Starter incl. table, MultiCUT, pump, PC, camera incl. 1 x 97AR5556Z i-cut Production Console Sign Standard incl. Table mains 230V incl. Pump mains - 3 x 380V incl. Rigid Material Knife tool (for 8mm knife blades) 1,200 Kisscutting knife tool 1,200 Rulers kit for X starter machines 160 X-pad 1,720 Compact vacuum cleaner 2,020 Hodpfxsyrn Ths Abvjfd

Condition: used, Year of construction: 2004, x-travel 510 mm y-travel 355 mm z-travel 405 mm Hedpfx Absym D Auovofd table surface area 786 x 355 mm control Kitamura spindle turning speed range 150 - 15.000 U/min spindle taper SK 30 table load 240 kg rapid traverse X/Y/Z axis 50/50/36 m/min ATC 20 Pos workpiece diameter at full load 70 mm tool diameter if 2 vacant positions 100 mm tool length - max. 200 mm weight of tools max. 2 kg total power requirement 15 kVA weight of the machine ca. 4 t dimensions of machine L x W x H 2,4 x 2,1x 2,63 m

Condition: used, Year of construction: 2025, Milling machines Travel distance X: 1000 mm Travel distance Y :550 mm Travel distance Z: 500 mm Number of axis: 3 milling machine / machining center Control: Siemens spindle chuck: SK40 spindle revolutions: 12000 rpm Speed range from: 20 U/min Speed range to: 12000 U/min table size X: 1200 mm table size Y: 550 mm max. workpiece weight: 800 kg tool changer: 24 - time input Power : 15 kW Torque: 95 Nm Rapid traverse: 36 m/min feed rate: 10000 mm/min spindle cooling chip conveyor control Siemens Vertical CNC machining center (3-axis) Year of manufacture 2025 – like new condition Siemens control system Spindle speed up to 12,000 rpm, SK40 Rigid cast construction for high precision Hfsdeyn Ikfspfx Abvjd 24-position tool changer High rapid traverse for efficient machining Equipped with spindle cooling and chip conveyor Suitable for toolmaking, mold making, and production Ready for immediate use

Condition: ready for operation (used), Year of construction: 2000, Main Drive Spindle speed range 45000 Spindle motor power 6 kw Movement X-Axis Movement 2450 mm Y-Axis Movement 1400 mm Z-Axis Movement 800 mm This 5-axis GEISS FZ 2000 x 1000 was manufactured in 2000. It features a robust CNC milling machine capability with X-axis travel of 2450 mm, Y-axis of 1400 mm, and Z-axis of 800 mm. The milling spindle supports a maximum speed of 45000 rpm with a power of 6 kW. Consider the opportunity to buy this GEISS FZ 2000 x 1000 CNC milling machine. Contact us for more information about this machine. Application Types Milling Hedpfx Asx D E U Sobvsfd

Condition: used, Year of construction: 2016, machine/vehicle number: PR01117250929, Weight: 750 kg, table size: 100x200 cm, with control unit installed in cabinet, mobile, wooden partitions, 1 worktop mat, hoses up to ball valve. Hsdpfeyn Nivex Abvjfd

Condition: used, Year of construction: 2020, machine/vehicle number: 701644, Travel paths (X/Y/Z): approx. 2,000 x 1,000 x 150 mm, clamping table surface (X/Y): approx. 2,100 x 1,050 mm, equipped with HEIDENHAIN TNC620 touch control, 1 cooling unit, 1 workstation mat, hoses up to ball valve (collection by arrangement, until end of March) Hodpfx Asyn Nipsbvjfd

Condition: used, Year of construction: 1995, Technical details: x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm table surface area: 800 x 400 mm range of revolution per miute: 63 - 3150 / 18 step U/min feed continuous: X/Y/Z: 8 - 800 / 8step mm/min. spindle taper: SK 4 spindle head swivable left - right: 90 ° quill stroke: 105 mm total power requirement: 5,3 kW weight of the machine ca.: 2245 kg machine dimensions LxWxH: 2,1 x 2,8 x 1,9 m Hedpfsytnd Ajx Abvefd Control screen replaced with new LCD. The milling machine is equipped with measuring system with digital display PROTOTRAK MX2. The X and Y axes can run cycles. (interpolation), the Z-axis is moved manually. Spindle with right/left travel Automatic tool clamping via control command Coolant device (without container) Chip collection tray Tool accessories (comparable in the photo) *

Condition: new, Portal machine - the space miracle! CNC portal milling machine for large traverse paths with small space requirements! ADVANTAGES: -optimized space utilization, completely free table clamping area -best possible chip protection due to overhead axes -particularly suitable for high and bulky components -PILZ safety technology -Windows 10 APPLICATIONS: -chipping -measuring and testing -dosing applications FOR MACHINING: -Aluminum / light metals -Milled plastics -Ceramics -Non-ferrous metals (brass, bronze, etc...) -Plastics -Wood Maximum functionality with minimum space requirements is the motto of the OverHead Gantry M. The basic machine can be optimally configured for many sectors and work areas using a variety of variable equipment features and additional options. The possible applications of the OverHead Gantry M include measuring, testing and metering applications in addition to machining. The power of the milling motor of up to 2.2 kW and 20,000 rpm and a traverse speed up to 250 mm/sec make it suitable for processing wood and plastic as well as light and non-ferrous metals. The free processing area and its excellent price/performance ratio off er decisive benefits compared to similar products. The OverHead® Gantry M is available in five different sizes for different process areas from M20 to M50. Do you require the control cabinet on the right-hand side or would you prefer the control panel to be on the left? No problem – we will be happy to accommodate your requirements. And of course we will take care of maintenance and support for your OverHead® Gantry M. Our service technicians can be reached by telephone and can attend to you quickly on-site as needed. In addition, we also off er our in-house isy-CAM 2.8 software and can advise you on your specific application. BENEFITS: -Optimal use of space -Free machining area -Fixed table, mobil portal -Variable clearance of 340- 590 mm -Also suitable for a large chip volumes Hfsdpfohqhlvsx Abvod SET UP: Portal: mobil, Table: Fixed

Condition: good (used), Year of construction: 1983, functionality: fully functional, Universal Production and Tool Milling Machine Type: UWF 700 PH Machine No.: 5670 Serial No.: 034650 Year of manufacture:1983 Control system: Positioning and path control incl. display HEIDENHAIN TNC 135 3-axis manual input control TECHNICAL DATA Working area X-axis (longitudinal) manual/automatic: 410/390 mm Y-axis (transverse) manual/automatic: 310/290 mm Z-axis (vertical) manual/automatic: 400/380 mm Quill travel vertical: 63 mm Clamping surface, vertical: 830 x 224 mm Number of T-slots: 4 Angular table clamping surface: 700 x 285 mm 6 T-slots: 12 H8/45 mm Workpiece weight: 200 kg Distance table – spindle nose (vertical): 0 – 515 mm Distance table – spindle center (horizontal): 30 – 565 mm Drive power (at 1500 rpm): 2.2 kW Speed range: 45 – 2000 rpm Number of speeds: 12 Speed progression (geometric steps): 1.4 Tool holder (DIN 2079): ISO 40 Feed range (all axes): 2 – 1500 mm/min Rapid traverse (all axes): 1.5 m/min Operating voltage: 380 V/50 Hz Machine dimensions: 1.2 x 1.6 x 1.7 m Space required: 2.1 x 2.1 m Machine weight: 1100 kg EQUIPMENT / ACCESSORIES  Hand operation and CNC program control  Vertical and horizontal machining  Swiveling vertical milling head  Adjustable-angle vertical milling head  Various tool holders  Manual quill feed (vertical)  Angular table 700 x 285 mm Hsdpfx Asx Ry Atsbvjfd  Coolant system  Coolant and chip tray  Electrically secured chip guard in work area  Mounting elements  Machine lamp  Documentation Condition: Control system overhauled, workshop tested

Condition: good (used), Technical data: Travel paths: Longitudinal X-axis: 762 mm Cross Y-axis: 305 mm Vertical Z-axis: 406 mm Quill travel: 127 mm Spindle mount: collet chuck Hfedpfxew Ebhmo Abved Table size: 1067 x 229 mm Speed range: 50–3750 rpm in two steps Weight: 1000 kg Equipment: - SONY digital readout, 2 axes (X and Y-axis) - Machine lamp - Drill chuck 0–13 mm - Collet system - Machine vice, jaw width 150 mm - Safety guard, electrically secured, type ZE-FS 30-300, fully mounted - Documentation Condition: good, workshop-tested

Condition: used, Year of construction: 2001, operating hours: 6,023 h, total height: 2,500 mm, total length: 3,500 mm, total width: 2,000 mm, Empty weight: 5.000 kg Price: On request - Year: 2001 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 00600169 - Operating hours: 6023 - Drive system: CNC - Horizontal/vertical: vertical - Control system brand: Fanuc - Control system type: 18-M - Power [kW]: 15.0 - Number of axes [pcs]: 4 - X-axis travel [mm]: 1020 - Y-axis travel [mm]: 510 - Z-axis travel [mm]: 510 Hsdjyk Hbnjpfx Abvsfd - Table length [mm]: 1150 - Table width [mm]: 500 - Tool holder: BT40 - Main spindle power [kW]: 11 - Max. spindle speed [rpm]: 8000 - Options: Chip conveyor, External cooling, Tool magazine - Transport dimensions: 3500mm x 2000mm x 2500mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1998, total height: 2,200 mm, total length: 3,340 mm, total width: 1,830 mm, Empty weight: 5.000 kg - Year: 1998 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Drive system: CNC - Horizontal/vertical: Horizontal - Control system brand: Fanuc - Power [kW]: 11.0 - Number of axes [pcs]: 3 - X-axis travel [mm]: 1000 - Y-axis travel [mm]: 505 - Z-axis travel [mm]: 520 - Table length [mm]: 1400 - Table width [mm]: 400 - Tool holder: ISO50 - Main spindle power [kW]: 11 - Min. spindle speed [rpm]: 35 - Max. spindle speed [rpm]: 2000 - Tools included: Yes - Transport dimensions: 3340mm x 1830mm x 2200mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Hodpfx Aeyk Ez Tobvefd Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, x-travel 1.100 mm y-travel 700 mm z-travel 500 mm spindle tunring speed 30 - 2066 U/min Hjdpfjynnu Rjx Abvefd spindle taper SK 40 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2001, x-travel 550 mm y-travel 500 mm z-travel 400 mm Control Siemens spindle tunring speed 12.000 U/min table surface area 1050 x 450 mm table load 500 kg In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as Hfedpfx Ajynnu Dsbvod prior sale!

Condition: used, Year of construction: 2007, x-travel 620 mm y-travel 420 mm z-travel 400 mm control TNC 320 HEIDENHAIN spindle taper ISO 40 spindle turning speed range 50 - 4.000 U/min Hfodpfx Aboyq Sv Doved table-size 800 x 400 mm table load 400 kg feeds -stepless- 0 - 8000 mm/min rapid traverse 8,0 m/min power capacity 6,0 kW quill stroke 80 mm voltage 400 V total power requirement 17,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,90 x 2,70 x 2,05 m - .: 90288 - Control: TNC --- - electrical hand wheel - Horizontal milling spindle - Coolant equipment

Condition: good (used), Year of construction: 2016, Equipment: documentation/manual, - CNC wireless remote control - Zero-3 / 5-channel stepper motor controller - Base frame (mobile on casters) - DELL PC (with monitor, keyboard, and mouse) - WinPC-NC USB software (version 2.50) - Accessories Hodeyr Efuspfx Abvsfd

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,000 mm, table width: 1,000 mm, table length: 3,500 mm, ZAYER bed type milling machine in good working condition. Specifications: X-axis travel: 3200mm Y-axis travel: 1200mm Z-axis travel: 1000mm milling head taper: ISO 50 Hjdow Uha Hspfx Abvofd control: Heidenhain TNC410 table size: 3500x1000mm year of manufacture: 1999