Used Turret Winder for sale (1,884)

Condition: good (used), Year of construction: 2002, Manufacturer: BRÜCK Tip: 12/1600 Load capacity: 12000 kg Max sheet width: 1600mm Bodjhrnbkepfx Al Ijwl Coil diameter: 1800mm Weight : cca 14 t Without control cabinet!

Condition: used, HERBERT 9C-30 TURRET LATHE MAKE HERBERT, MADE IN ENGLAND MODEL 9C - 30 MAX DIAMETER OVER BED 762.0 mm CHUCK TYPE 4 JAW CHUCK SIZE 630.0 mm MAX DIAMETER OVER CROSS SLIDE 535.0 mm MAX DIAMETER IN FRONT OF CROSS SLIDE 737.0 mm LENGTH BETWEEN CHUCK FACE -TURRET FACE 1505.0 mm TRAVEL OF TURRET 1066.0 mm DIAMETER OF HOLE THROUGH SPINDLE 125.0 mm SPINDLE SPEED 7 – 600 RPM Bwedpfxsy H Hc Ej Al Isl PLUS OPERATOR SAFETY DOOR GOOD RANGE OF ACCESSORIES

Condition: used, Acer ‘E’ Mill Turret Milling Machine Bwodeyzfn Aepfx Al Isl (Ex College) 2 Axis Newhall Spindle Taper R8 Spindle speeds to 60 – 4200rpm Table Size 50 x 10” Table Power Feed Longitudinal 415V Electrics Coolant For sale with Jet Machinery Ltd Jet Machinery Stock No: #79134 Machine Serial Number: 506016 Cost: £2,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Bedpfx Aoxxb Rrjl Iswl Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 1981, Bridgeport BR2J2 Turret Milling Machine Digital Readout Spindle Taper R8 Table Size 1065 x 230mm Table Travel: X - 765mm Y - 305mm Bwsdpfxjyary Io Al Iol Knee Travel: Z - 405mm Quill Travel Z - 127mm Coolant 415V Electrics Coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79044 Machine Serial Number: 362070681W Cost: £4,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2018, Clausing Colchester 4VSQ MLLPWR CNC Turret Milling Machine Acu-rite Mill Power 3 Axis CNC Control Table Size 1370 x 254mm Travels: X – 1050mm Y – 390mm Z (Quill) – 115mm Z (Knee) – 355mm Vari Speed Head Spindle Taper IS040 Spindle Speeds Low 60 – 500rpm Spindle Speeds High 55 – 4300rpm Weight: 1850Kgs 3 Phase Electrics Manufactured: 2018 Bedsx Af I Aepfx Al Iewl Complete with: Vice Interlocking Table Guards Air Draw Bar Tooling Packaged (ISO40) Power Rise and Fall to Knee Auto Lube Worklight Coolant & Swarf Guards / Tray *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79028 Machine Serial Number: TC0015 Cost: £12,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2007, XYZ SMX SLV 3 Axis Turret Milling Machine ProtoTRAK | SMX Control (2007) 3 Axis CNC Capacity (X Axis, Y Axis & Quill) Spindle Taper ISO 40 Spindle speeds to 70 - 3600 RPM Table Size 1473 x 305mm Table Travel: X - 1000mm Y - 410mm Knee Travel: Z - 413mm Quill Travel Z - 127mm Air Power Draw Bar Supplied with a range of spindle tooling Coolant Year of Manufacture: 2007 Weight: 1850 Kgs Power Requirements: 18A *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79109 Machine Serial Number: 12308 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use. Bwedsx Tiq Sjpfx Al Iol

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: NX1102194, milling spindle speed (min.): 50 rpm, milling spindle speed (max.): 3,500 rpm, Equipment: lighting, SPECIFICATION Table size 1244 x 230mm Longitudinal traverse 700mm Cross traverse 300mm Vertical traverse 405mm Quill travel 125mm Quill feeds 0.045-0.086mm/rev Quill diameter 86mm Quill taper R8 Bwodpfx Asy H Ix Uel Ijl Spindle motor 2.2kW Spindle speeds (inf. Variable) 50-3500rpm Weight 1200Kg Machine in Metric execution MACHINE EQUIPPED WITH Sino 3 axis DRO system Longitudinal power feed One shot centralised lubrication system Low voltage halogen worklight Spindle guard Coolant system

Condition: used, Year of construction: 1999, Amada Europe 245 CNC Turret Punch. S/No. 245013 (1999), with GE Fanuc Series 18i-P Control, Max Force 200KN, Max Stroke 1290mm, Light Guards, Qty of Assorted Power Tooling Location: These lots are located in Yeovil, UK. Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser. Bwedpfx Aljy D Rb To Isl

Condition: used, Year of construction: 2006, spindle speed (max.): 5,000 rpm, total width: 45,000 mm, total length: 19,900 mm, total height: 23,000 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, bar length: 600 mm, CNC Lathe (with 2nd spindle, 3 turrets and Y-axis) Spindle bore diameter 65 mm Spindle speed 5.000 R/min Spindle motor 25/20 kW Spindle speed counter spindle 5.000 R/min X-axis movement 165 / 165 / 165 Y-axis movement 80 mm Z-axis movement 220 / 150 / 650 mm Bwsdpfxsy Egpio Al Iel W-axis movement (subspindle to mainspindle) 690 mm C-axis indexing 0,0001° Number of turret 3 Number of tools on turret 12 (3x 12) Tool taper VDI 30 Bar feeder LNS Quick Load Servo 65 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2007, Technical details: faceplate diameter: 1600 mm power requirement: 80 kW weight of the machine ca.: 25 t dimensions of the machine ca.: 4,4 x 4,62 m max. workpiece diameter: 2000 mm max. diameter of face turning: 1800 mm tool taper: ISO50 Bsdpfx Alox Aq E Hs Ijwl The machine has been regularly serviced and is in good technical condition. With C-Axis *

Condition: ready for operation (used), Amada Apelio II 305072 – CNC Turret Punch Press Amada Apelio II 305072 CNC Turret Punch Press | 30T | 1270×3660mm | 58 Station Amada Apelio II 305072 CNC Turret Punch Press in excellent working condition. A proven, high-capacity sheet metal machine ideal for production environments and precision punching jobs. 🔧 Key Specifications: Punching force: 30 Ton Max sheet size: 1270 × 3660 mm (with repositioning) Table size: 1270 × 1830 mm Turret: 58 station (incl. auto-index stations) Max sheet thickness: ~6 mm (mild steel) Control: AMADA / FANUC (model dependent) High-speed stroke rate for efficient production ⚙️ Features: CNC controlled for precision and repeatability Thick turret tooling system Suitable for a wide range of sheet metal applications Reliable AMADA build quality 🏭 Applications: Sheet metal fabrication Enclosures, panels, brackets Bwjdpfx Aloyz T Dlo Ijl General engineering production

Condition: used, Model: WMW NILES DKZ4000 Vertical Turret Lathe (VTL) Faceplate Diameter: 3,500 mm Max. Turning Diameter: 4,000 mm Max. Turning Height: 2,000 mm Side Head Vertical Travel: 1,700 mm Bodey Ivwbopfx Al Iswl Side Head Horizontal Travel: 1,000 mm Origin: Germany (WMW NILES)

Condition: good (used), Year of construction: 1983, Faceplate diameter: 1250 mm Max. turning diameter: 1400 mm Max. turning height: 1180 mm Max. ram stroke, vertical: 750 mm Table load capacity: 5,000 kg Faceplate speed range: 4 - 210 rpm Vertical slide swivel adjustment: 45° Feed range: 0.044-8 mm/rev Rapid traverse: 2 m/min Machine dimensions (L x W x H): approx. 2715 x 2665 x 3950 mm Total weight: approx. 16,500 kg Bodpfx Aley Ex Epe Ijwl Accessories / Special features: • 2-axis digital display, make ACU-Rite • Faceplate Ø 1250 mm with 4 jaw chucks • 5-position turret head Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, faceplate diameter 1400 mm swing diameter 1600 mm turning height 1200 mm turning speed range - milling 1 - 240 U/min Control Siemens SIN 820T ram head - cross travel 1000 mm total power requirement 55 kW A.T.C. 12 positions Tooling Bodpfsyuqdzex Al Iewl

Condition: excellent (used), turning diameter over bed 260 mm spindle passage 28 mm turning length 300 mm centre height 130 mm turning speeds 125 - 2800 U/min total power requirement 3 kW Bwedpey Ivdzjfx Al Iel weight of the machine ca. 0,8 t dimensions of the machine ca. 1,4 x 0,6 x 1,4 m

Condition: used, faceplate diameter 2500 mm swing diameter 2700 mm turning height 1600 mm turning speed range - milling 1,18 - 32,5 U/min turning speed range - milling 4,25 - 117 U/min workpiece weight 10000 kg side head - cross travel 800 mm ram head - cross travel 45 degrees - 1000 mm ram head - cross travel 30 degrees - 1000 mm total power requirement 80 kW Bwodoyuqidepfx Al Iel 2-Axis D.R.O. 5 positions turret

Year of construction: 2026, condition: new, Our KVK 5 is a semi-automatic rotary arm wrapper, which has the advantage over our wrappers with turntable that your pallets can be placed at ground level for the wrapping process. Equally ideal for light, unstable and heavy packaged goods, as there are no centrifugal forces and no load-bearing capacity to consider. In addition, the KVK 5 model is equipped with a pre-stretch system for 250% elongation. This pre-stretching system allows you to produce up to 3.5 m of film on the pallet from 1 m of film on the roll and reduce your material consumption enormously. With the KVK 5, there is only minimal contact tension, so that even light packages are not pulled off the pallet. The only thing that still has to be done manually with this wrapper is applying and cutting the film. Bwodpfjy Drqisx Al Iel The machine weight of almost 1000 kg shows how solid and stable this wrapper is. With its rotating arm, it can wrap pallets up to a maximum dimension of 1.00 x 1.20 x 2.40 m. With adjustable speeds of the rotating arm and film carriage, as well as a pre-stretching unit adjustable via potentiometer, you can adapt the automated wrapping perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. In addition to an optional photocell for the detection of dark packing goods or black film, this wrapper can be supplied either for wall mounting or with the feet shown. We recommend this model if it is important to you not to have to overcome a ramp with your goods - for example because they are too heavy or unstable. The fact that the rotating arm in this design rotates around the pallet also avoids any centrifugal force. Together with the low contact tension of the pre-stretch system, this also makes the KVK 5 ideal for very light packaged goods. For further information we have attached the technical data sheet as PDF to this advertisement !

Condition: excellent (used), Faceplate: 2500 mm Max. turning diameter: 2800 mm Max. turning height under tool edge: 1500 mm Spindle speed: 110 rpm Workpiece weight: 10 tons Digital readout Bwedpfey D Tw Djx Al Iol Jaw boxes

Condition: used, Year of construction: 1995, faceplate diameter 4000 mm swing diameter 4300 mm turning height 1750 mm slide adjustment 1000 mm table load 18 t turning speeds 1-92 U/min Control Siemens type 840 D mm Rest 2 ram head dimension 250x250 mm Feed 1-4000 mm/min main gear-box motor 55 kW total power requirement 85 KVA weight of the machine ca. 64 t dimensions of the machine ca. 8x5,8x8 m The machine was overhauled in 2007. The machine is currently designed to machine rings, Bwsdpsyquyfjfx Al Iel but can be converted again for machining large parts. Additional information Chip conveyor The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2009, faceplate diameter 1800 mm swing diameter 2000 mm turning height 1500 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min power capacity - table 100 kW Torque 31784 Nm total connected load 218 kW weight of the machine ca. 55 t Turning- and Boring heads: - 4 x Turning heads + steelholders - 3 x Turning heads for Capto - 1 x Boring head (driven) - 2 x angular boring heads (Manufacturer Benz) Dimensions: - Turning diameter on the faceplate 2000 mm - Faceplate diameter 1800 mm - Turning height with turning head L100 1500 mm Power on the ram: - Clamping force of tool holder or accessories 120,000 N - Max. Feed force Z and X axis 30,000 N - Drive power of the milling, drilling and grinding spindle 37 kW - Speeds for turning 10 - 3000 rpm Travels: - Axis X, horizontal support on the crossbeam -2270/+2275 mm - Axis Z, vertical support on crossbeam 1250 mm - Axis C, table rotation 360° Feed speeds: - Axis X 15,000 mm/min - Axis Z 15,000 mm/min - Axis C 3.25 rpm Coolant system: - Coolant system filter system 1500 l Chain tool magazine with 80 places: - max. tool weight 30 kg - Max. tool diameter with free auxiliary slots 250 mm Disk magazine with 12 slots: - max. weight of tool holders/accessory units 150 kg - max. length of tool holders 500 mm - max. magazine load 1000 kg Pallet changer with 2 pallets: - Pallet diameter 1800 mm - Pallet load capacity (centered) 5000 kg - Pallet load capacity (on center) 4000 kg Equipment / accessories: - 1x pallet with claw boxes, diameter 1800 mm - 1x hydraulic chuck with base jaws, diameter 1800 mm Bedpfx Aljvylilj Iewl - Various drilling and milling heads - Various turning tool holders - 2x measuring probes

Condition: used, functionality: fully functional, Herbert 9C-30 Turret Lathe Type of chuck: 4 jaw Bedpfx Alsyudgvs Iowl Diameter over bed (Max): 762mm Diameter over cross slide (Max): 535mm Diameter in front of cross slide (max) : 737mm Length between chuck face & turret face (Max): 1505mm Travel of turret: 1066mm Diameter of hole through spindle: 125mm

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Technical details faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor Bjdpfxoyzy Tyo Al Iewl 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21.

Condition: used, Technical details: faceplate diameter: 1000 mm swing diameter: 1600 mm turning height: 1200 mm main drive: 75 kW faceplate speeds from - to: 7 - 800 U/min milling motor: 25 kW milling head speed: 7 - 3000 U/min milling spindle - taper: ISO 50 cross rail adjustment - vertical: 800 mm ram head dimension: 240 x 240 mm weight of the machine ca.: 40 to dimensions of the machine ca.: 9 x 7,8 x 6,0 m Machine general overhould in 2004 and equiped with Siemens 840 D control Bjdpfx Asvb Dcael Iewl - tool changer rack magazine - C-axis, live tooling, - Transmit function electronical Y-axis - angular milling head - complete splash housing - coolant device, chip conveyor *

Condition: used, Technical details: faceplate diameter: 1800 mm swing diameter: 2000 mm turning height: 1170 mm z-axis: 1000 mm cross rail adjustment - vertical: 800 mm faceplate speeds:: 2,5 - 280 workpiece weight: 12 t feeds: 1 - 6000 mm/min max. torque on the faceplate: 50000 Nm total power requirement: 85 kW weight of the machine ca.: 41 t dimensions of the machine ca.: 5,6 x 4,8 x 4,6 m Bsdpfx Aovb Db Njl Iewl Machine retrofit and overhould in 2005 with SIEMENS 840 D powerline control - 6 jaw hydraulic power chuck - tool changer for 12 tools - chip conveyor, coolant attachment, splash housing - various tool holders *