Used Turret Punching Machine for sale (65,583)

Condition: used, MURATEC WIEDEMANN MOTORUM 2048 CNC TURRET PUNCH MACHINE MAKE MURATA WIEDEMANN, MADE IN JAPAN MODEL MOTORUM 2048 CONTROL FANUC 30i TOUCH SCREEN YEAR 2016 CAPACITY 20 TONS SHEET SIZE (WITH ONE REPOSITIONING) 1250mm x 2500mm SHEET THICKNESS MAX. 6.35 mm Y, X STOKE Y AXIS: 1360.0 mm X AXIS: 2550.0 mm PUNCHING ACCURACY +- 0.1mm THROAT DEPTH 1340.0 mm MAX ALLOWABLE SHEET WEIGHT 150 KG HIT RATE 1.0T 25 mm PITCH 8.3 mm stroke: 355 HPM 0.5 mm PITCH 1.4 mm stroke: 900 HPM Njdpfjxvch Tox Aazedb SIMULTANEOUS AXIS SPEED 125 m/MIN PUNCHING ACCURACY +- 0.1 mm TURRET INDEX SPEED 35 RPM COMPRESSED AIR QUANITY: 100NL/MIN PRSSURE: 0.5 MPa POWER SUPPLY 19 kVA PLUS GOOD SET OF TOOLING ONE OWNER FROM NEW VERY LESS HOURS SAFETY GUARDS

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Njdpfxjxxb Rro Aazjdb Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2013, operating hours: 97,817 h, machine/vehicle number: S0631C0211, controller model: Simatic IPC627, laser power: 3,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 600 mm, Note: The machine indicates an error, which suggests a defect in the beam source. The replacement parts recommended by Trumpf cost approximately €30,000. TECHNICAL DETAILS Working Area Travel range X-axis: 3,000 mm Travel range Y-axis: 1,300 mm Travel range Z-axis: 600 mm Travel range B-axis: ±135° Travel range C-axis: n × 360° Working height: 605 mm Laser Model: TruDisk 3001 Laser power: 3,000 W Scanning frequency: 10 Hz–100 kHz Axis Speeds Simultaneous axis speed: max. 173 m/min X-axis: max. 100 m/min Y-axis: max. 100 m/min Z-axis: max. 100 m/min B-axis: max. 90 rpm C-axis: max. 90 rpm Accuracy Smallest programmable path increment: 0.001 mm Positioning deviation, linear axes X/Y/Z: max. 0.03 mm Positioning deviation, rotary axes B/C: max. 0.005° Positioning error, linear axes X/Y/Z: max. 0.08 mm Positioning error, rotary axes B/C: max. 0.015° MACHINE DETAILS Control and Data Processing Control model: Simatic IPC627 Hard disk storage: 60 GB Color monitor: 12" TFT Network speed: 100 Mbit/s Modem: 56 kBaud/s Pneumatics and Cutting Gas Connection pressure: min. 6 bar Connection pressure: max. 14 bar Compressed air consumption, machine: approx. 30 Nm³/h Compressed air consumption, short-term: max. 40 Nm³/h Cutting gas working pressure: max. 20 bar Electrical Connection Base machine: 47.0 kVA Laser unit TruDisk 3001: 19.5 kVA Laser unit TruDisk 4001: 27 kVA Cooling unit TruDisk 3001: 9 kVA Cooling unit TruDisk 4001: 12 kVA Operating hours: 97,817 h EQUIPMENT Hard disk with RAID controller USB interface Ethernet network connection RJ-45 connector Support for ET BEUI, TCP/IP, Novell Server, and NTFS file system Solid-state laser from the TruDisk series Fast rotary changer with tooling and control system Scrap conveyor for continuous removal of cut-outs and scrap grids Njdpfx Ajz Dvfxeazedb

Condition: used, Year of construction: 2000, input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 9,200 kg, Equipment: safety light barrier, We offer this used TRUMPF Trumatic 2000 R punch machine, year of construction 2000. Maximum punching capacity: 180 kN Type: 9110 Serial number: 700359 Year of manufacture: 2000 Mains supply voltage: 400 V Mains supply frequency: 50 Hz Connected load: 17 kVA Distribution voltage: 400 V Control voltage: 24 V DC Fuse rating: 3 x 35 A Air pressure: 7-14 bar Machine weight: 9200 kg Ndsdpfxsz Ak Dij Aazsb If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2008, XYZ SMX 5000 CNC Vertical Turret Milling Machine With Prototrak SMX Control Njdjzvp E Eopfx Aazodb Table Dimension 1,930 x 355mm (4 'T' Slots). Maximum Table Load 850kg. Axis Travel 'X'=1,524mm, 'Y'=596mm, 'Z'=520mm. Quill Ø116mm. Quill Travel 127mm. Spindle Nose to Table 620mm. Spindle Centre To Column Face 520mm. Speed Range 40-5,000rpm (7.5kW Motor). Spindle Taper ISO40. Power Drawbar. S/No. 11100 (2008). With Coolant System, Table Guarding, Work Light, Vertex Heavy Duty Vice (Jaw Width 205mm), Indexing Head 3 Jaw Chuck 200mm, Centre Height 170mm, 8 Drawer Steel Cabinet With Contents Of Spindle Tooling & Clamp Sets. Approx Overall Dimensions L5,805 x W3,143 x H2,690mm. Weight 3,100kg. Note: Machine Had Control Upgrade 2023.

Condition: used, Iron worker, punch press and section shear  Including Length-Stop Ndodpewnhd Hjfx Aazob Hersteller: Mubea / Muhr & Bender Type: Hydraulic Type: KBLH 1000 Capacity: 110 ton Shear plate: 200x26mm, 500x20mm Notching: 85x75x16mm Throat: 510mm Machine-weight: 4600kg - Documentation available: No - CE certificate present: No - Drive: Hydraulic - Punching force [ton]: 110 - Punch throat depth [mm]: 510 - Options: Length stop Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2007, operating hours: 52,506 h, functionality: fully functional, punching force: 180 t, sheet thickness (max.): 6 mm, travel distance X-axis: 3,070 mm, travel distance Y-axis: 1,660 mm, punching diameter: 76 mm, workpiece weight (max.): 230 kg, overall weight: 16,000 kg, feed rate X-axis: 90 m/min, feed rate Y-axis: 60 m/min, space requirement width: 6,800 mm, space requirement length: 7,600 mm, space requirement height: 2,500 mm, Equipment: safety light barrier, Special equipment: + MultiShear function + MultiTool function + Brush tables Standard equipment: - Safety light barriers - 3 clamping claws - Rotation of all tools - NC-controlled, digital, maintenance-free three-phase drives - Automatic repositioning - Tool length compensation - Small parts chute 500x500 mm - Punching slug extraction - Tool spray lubrication - Automatic tool change - Programmable punching tool lubrication with 2 containers Nsdpez En Iuefx Aazedb - Programmable stripper - Network interface RJ34 - 3.5" floppy disk drive - TOPS 2000 graphics programming - Online diagnostics via modem - Operating manuals.

Condition: good (used), Year of construction: 2007, Well-maintained Euromac CNC punching and nibbling machine Type MTX Index 5 Nsdpfszz N Tajx Aazedb 5-station tool changer with auto-indexing Stroke length 1250 mm Capacity 30 tons Includes 2 multi-tools and numerous tools (see photos)

Condition: used, Year of construction: 1999, connected load frequency 220 V rated current 263/152 Ndedpfx Asvvx E Seazsb weight of the machine ca. 1 t

Condition: good (used), Year of construction: 2004, Used CNC punching machine from Finn Power Type: C5 Travel range X: 2580 mm Travel range Y: 1270 mm Punching force: 30 tons Including tools Nodpfxsxphwyj Aazsdb

Condition: used, Year of construction: 2007, Machine No. 78, control system, manufacturer Boschert, tool quick-change system, manufacturer Trumpf, punching force: 3 x 280 kN, station 1 Trumpf system tool size 3 (105 mm) with spray device, station 2 Trumpf system tool size 3 (105 mm), freely indexable rotation, station 3 Trumpf system tool/Boschert Revotool size 3 (105 mm), including Revotool 8-position tool holder, travel distances X – 3,000 mm (adjustable up to 9,999 mm), Y – 1,580 mm, punching arm overhang 1,730 mm, sheet thickness max.: 6 mm (clamp opening), stroke height max.: 90 mm, programmable in increments upwards and downwards, punching slug extraction, ball bearings in the machine table Table width left + right: 3,200 mm each, table depth: 2,810 mm, table height: 900 mm, overall width: 6,482 mm, overall depth: 4,600 mm, overall height: 2,110 mm; with workshop cart, manufacturer KS Tools, 7 drawers, contents: various hand tools. Nsdpfxez Dv Tvo Aazedb

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand finishing machine, the “Canon Multifunction Pro Puncher B1” Item for sale: 1 x Canon Multifunction Pro Puncher B1 Condition: This is a second-hand machine, which may show signs of wear (minor scratches or discolouration). The device has been tested to ensure it is in working order Ndsdpfx Aez Aqy Roazob Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sturdy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: good (used), Year of construction: 2006, functionality: fully functional, punching force: 30 t, total height: 1,900 mm, working range: 10,000 mm, travel distance X-axis: 10,000 mm, travel distance Y-axis: 1,250 mm, overall weight: 6,400 kg, throat depth: 1,250 mm, compressed air connection: 6 bar, space requirement width: 4,000 mm, space requirement length: 3,200 mm, space requirement height: 1,900 mm, input voltage: 400 V, Euromac ZX INdex 1250/2000/30 *Includes Multitool 6 *Includes various tooling Year of manufacture: 2006 Punching force: 30 tons Working area: 1250 x 2000 X-axis movement: 2000 mm with extension up to 10,000 mm Y-axis movement: 1250 mm X-axis speed: 50 m/min Y-axis speed: 50 m/min Stroke: 30 mm Max. stroke frequency (in steps of 1 mm, 1 mm sheet thickness): 730 1/min Max. stroke frequency (in steps of 25 mm, 1 mm sheet thickness): 300 1/min Table height: 980 mm Motor power: 5.5 kW Oil tank: 115 l Length: 4000 mm Width: 3200 mm Height: 1900 mm Transport dimensions: 4000 x 2300 x 1900 mm Weight: 6400 kg Includes 6-position multitool holder 2 clamping jaws with automatic repositioning Table with brushes Automatic repositioning up to 10,000 mm Max. punching diameter with single tool: 88.9 mm Ndjdjz Dutuepfx Aazjb Max. punching diameter multitool holder MTE6: diameter 24 mm Max. opening of the clamping jaws: 7 mm Transport width: 2350 mm Operating manual in English and Italian CE declaration available

Condition: used, Year of construction: 1997, sheet width 1015 mm plate length 1015 mm plate thickness 6,0 mm Punching capacity 25 t punch diameter 88,9 mm total power requirement 16 kW weight of the machine ca. 12000 kg dimensions of the machine ca. 4000 x 2320 x 2300 mm Equipment: - Tool changer with 20 positions - FANUC Series O-P control - Foot pedal Nodpfx Ajuiz Iwsazedb - Operating instructions (English)

Condition: ready for operation (used), Year of construction: 2015, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2015101, Size 60 x 76 cm, die-cutting machine with automatic registration and camera system. Njdpjzxf Hdsfx Aazjdb

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, control type: CNC control, laser type: fiber laser, laser power: 3,000 W, power: 2 kW (2.72 HP), warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, The Yawei HPML30510 is a combined laser punching and cutting system for highly precise and efficient sheet metal processing in industrial applications. The machine combines servo-electric punching with laser cutting, achieving high processing speeds while maintaining low energy consumption. Thanks to its robust construction, automated systems, and modern CNC technology, the HPML30510 is particularly well-suited for demanding series production. Nedpfx Aoz D Th Deazedb The machine offered here is a demonstration model, in stock, immediately available, in new condition, and is offered with delivery (within Germany), commissioning, warranty, etc. It includes a comprehensive set of tools. It can be tested under power. Operating mode: Servo punching / laser cutting Punching force: 294 (30) kN (t) Laser power: 3000W Max. processing size (punching): 1600 x 3000 mm Max. processing size (cutting): 1500 x 2500 mm Max. material thickness: 6.35 mm (sphere) / 3 mm (brush) Max. punching diameter: 88.9 mm Stroke rate: 2000 cpm Punching frequency (1mm pitch): 700 cpm Punching frequency (25.4mm pitch): 400 cpm Accuracy (punching/cutting): ±0.10 mm Combined accuracy: ±0.15 mm Clamps: 4 pcs Tool stations: 38 pcs CNC system: Siemens 840Dsl CNC axes: 11 Max. sheet metal speed: 102 m/min Turret speed: 30 rpm Max. load: 180 kg Dimensions (length): 8000 mm Dimensions (width): 8000 mm Dimensions (height): 2300 mm Machine weight: 20000 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1984, machine/vehicle number: 12.873, throat depth: 300 mm, punching force: 100 t, overall weight: 2,250 kg, cutting width (max.): 600 mm, TECHNICAL DETAILS Punching force: 100 t Stroke: 300 mm Punching speed: 28 strokes/min Shearing width: 250 mm Max. sheet thickness: 16 mm Round material cutting capacity: 50 mm Cutting width: 600 mm Max. sheet thickness: 20 mm MACHINE DETAILS Control: Conventional Ndedpfxszxdquj Aazob Drive: Hydraulic Dimensions & Weight Dimensions (L x W x H): 1,800 x 1,250 x 2,100 mm Weight: 2,250 kg Shipping packages: 1 unit

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 45,500 h, punching force: 30 t, punching diameter: 89 mm, sheet thickness (max.): 5 mm, sheet thickness steel (max.): 4 mm, sheet thickness aluminum (max.): 5 mm, overall weight: 22,000 kg, total length: 17,000 mm, total width: 7,000 mm, total height: 3,500 mm, travel distance X-axis: 2,584 mm, travel distance Y-axis: 1,560 mm, workpiece weight (max.): 200 kg, compressed air connection: 6 bar, space requirement height: 3,500 mm, space requirement length: 17,000 mm, space requirement width: 7,000 mm, travel speed (max.): 10,800 mm/min, Equipment: safety light barrier, Finn Power punching machine 3000 x 1500 with an angle shear of 800 x 1500 mm and a stacker for 4 pallets. Loading table for sheets of 3000 x 1500. Punching up to 8 mm thickness, angle shear up to 5 mm thickness. Turret with 20 stations, including 1 multi-tool 10-16 and 1 multi-tool 24-8, 2 * Di, 3 * Ci, 2 * Bi. Also has 2 forming stations, Bf and Cf. Always used for thin sheet metal, max. 2 mm. A tapping head TU6 is included, but it displays an error message. Must be sold urgently due to a lack of space. Nedpfxozdc Iqs Aazodb

Condition: repair required (used), Year of construction: 1978, functionality: not functional, machine/vehicle number: 212 393, ram adjustment: 100 mm, pressing force: 160 t, stroke adjustment: 80 mm, overall weight: 18,000 kg, punching force: 160 t, We are offering this Haulick-Roos RVD160-1250 stamping press, manufactured in 1978, which requires repair. Pressing force during continuous operation: approx. 1600 kN Max. distance between table and ram: 350 mm Distance between the uprights along the length: 1250 mm Opening on the uprights, width x height: 640 x 460 mm Through hole in the table: 1000 x 250 mm Ram surface, width x depth: 1200 x 900 mm Dowel bore in the ram, diameter x depth: 50 mm Adjustable ram stroke: 20 – 100 mm Ram adjustment: 100 mm Stroke adjustable in infinitely variable steps: 50 – 300 mm Drive power: 22 kW Weight: approx. 18,000 kg incl. uncoiler and feed machine Uncoiler with feed machine: Manufacturer: Schleicher Type: 6-70 RM 76 Max. coil weight: Strip thickness: 0.5 – 4 mm Max. coil width: 650 mm Max. coil diameter: 1400 mm Power: 5.5 kW Year of manufacture: 1978 Feed and control: Including pre-piercing software ASTA All data are approximate. Technical specifications/equipment are non-binding and without guarantee. Ndsdpszdf Utofx Aazjb The machine is sold without any warranty or guarantee. Sale exclusively ex works, for dismantling or at additional cost. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2004, punching force: 50 t, punching diameter: 100 mm, stroke length: 60 mm, product height (max.): 15 mm, Mubea / Muhr and Bender KLH 500 / 610: - hydraulic hole punch - Punching force 50 to - stroke 60 mm - punches up to Ø 30 mm in 15 mm, Ø 50 mm in 9 mm, Ø 100 in 4.5 mm - throat depth 610 mm - with support table Nsdpevdiduefx Aazjdb Special tools and devices on request. Trade-in of used machines. Europe-wide delivery possible.

Condition: ready for operation (used), Max. working width: 430mm, binding element diameter range: 4.7mm-31.75mm, documentation available. An on-site inspection is possible. Nodjznx Itopfx Aazodb

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 18,000 h, control type: CNC control, actuation type: electric, controller model: AMNC-F (FANUC 180i-PB), punching force: 20 t, overall weight: 18,000 kg, Equipment: CE marking, documentation/manual, Manufacturer: Amada Model: EM 2510 NT Punching force: 20 tons (200 kN) Year of manufacture: 2007 Stroke length (X/Y): 2500 x 1270 mm (expandable for larger sheets) with repositioning Turret configuration: 45 stations with 4 automatically indexable stations Control system: AMNC-F (FANUC 180i-PB) Touchscreen operation Power supply: 27 KVA Equipped with brush tables Nodjzzrn Tspfx Aazjdb The machine is in very good condition! It can be inspected in working order on site. The machine will be supplied with several tools. Information and price available upon request.

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: 745-006-1, total height: 4,050 mm, ram adjustment: 60 mm, total width: 1,650 mm, total length: 3,000 mm, drop-through hole in table: 160 mm, pressing force: 100 t, distance between side stands: 420 mm, overall weight: 16,000 kg, year of last overhaul: 2014, Raster die-cutting machine Ndedpfx Aajz Ekvuezjb Stroke rate: 20 - 220 Table area: 700 x 1000 Stroke adjustment: 20 - 90 mm Unidor Compact Press CE 2014, complete system Weight: approx. 16,000 kg Accessories: Raster roller feed Kemmerich strip feeding system Safety fence

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, with feed mechanism and straightener, 400 mm band width, 3 mm band thickness Nodsz Dv Uaspfx Aazjdb with coiler: 2000 kg Press data: Press force: 800 kN Stroke: 8 - 110 mm Installation height: 390 mm Stroke rate: 30 - 120 /min Ram adjustment: 100 mm Table: 1000 x 800 mm Ram: 1000 x 800 mm Weight: 16000 kg Dimensions: 3400 x 2000 x 2000 mm (h x w x d)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1995, EDEL - Stanzprofi 250 / Punching machine Nsdpfoz Dq S Tsx Aazodb - CE marking - Year of manufacture 1995 - Table dimensions approx. 1350x700mm - Operating pressure 6 bar - Max. force 250 KN (25 MP) Dimensions approx. 1.6 x 2 x 1.8 meters / Weight approx. 1600 kg Errors and omissions excepted.