Used Twist Drill Grinder for sale (6,465)

Condition: refurbished (used), Year of construction: 1991, Work table 750 mm x 1200 mm Fjdpfx Aaoz S Tzzjnjpp Outrigger travel distance 1000 mm Tool holder MK 4 Drilling capacity 32 mm in steel Threading device Coolant system Documentation

Condition: good (used), Year of construction: 2000, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine Version • Work table 1200 x 600 mm with 4T-slots • Ram travel 750 mm Fpsdpfx Aez S T A Eoansp • Drilling spindle SK 40 with tool clamping device • Stepless speed programming • Stepless quill feed via three-phase servo motor • 2 T-slots 18 mm on the machine base at the rear • 2 T-slots 18 mm on the machine base on the left • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Protective device • USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance Spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance Spindle bottom edge - min mm 970 Ground max. mm 1580 Drilling radius mm 540 - 1590 Work table height mm 900 Machining values Drilling capacity in steel St 60  40 Cast iron GG 22  50 Thread cutting Steel St 60 M 36 Cast iron GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % duty cycle Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 – 2000 Feed drives X-axis - AC - Servo motor kW 0.25 Y-axis - AC - Servo motor kW 0.25 Z-axis - AC - Servo motor kW 4.50 W-axis - AC - Servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Feed rates, stepless mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis on 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen backlit, easily readable from all sides, 215 x 160 mm Position data: Cartesian or polar, dimensions absolute or incremental, Unit: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions according to Machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram technique: yes Machining cycles Standard software options: Programming in dialog, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted start Zero point determination: Cycles to determine zero points by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - aligning castings and forged parts - Angle detection in round parts by probing reference edges or surfaces Test graphic Graphical display of drilling patterns

Condition: excellent (used), Professional paper drilling machine from the renowned German manufacturer Constantin Hang Maschinenfabrik Göppingen. Model 114-4 is equipped with four drilling heads designed for precise drilling of paper, documents, catalogs, calendars, and print materials. The machine is suitable for use in: • printing houses, • bookbinding shops, • print production facilities, • binder and catalog manufacturing, • technical documentation preparation. Robust German engineering guarantees high working precision and long-term durability. Technical specifications: • Manufacturer: Constantin Hang Maschinenfabrik • Model: 114-4 • Number of heads: 4 • Adjustable head distance Fpsdpjz Smzpjfx Aanep • Adjustable worktable • Foot pedal operation • Safety guard • Made in Germany

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 400 mm, spindle speed (min.): 50 rpm, spindle speed (max.): 1,500 rpm, type of input current: three-phase, input voltage: 400 V, Equipment: rotational speed infinitely variable, A used, well-maintained, CNC-controlled drilling and tapping machine with a moving column, equipped for drilling, countersinking, and thread cutting, featuring: - 7-position tool changer Fodpsz S Rfdofx Aanepp - Micro-spray system - Internal coolant supply - Automatic tool length measurement - 5 pneumatic clamping cylinders - Documentation - Programming guide Drilling capacity in steel ST60: up to a diameter of 40 mm without pre-drilling Thread cutting in ST60: up to M30 Spindle speeds: 50-1500, freely programmable Tool holder: BT40 Travel distances X/Y/Z: 6000/650/400 mm Feeds: 0.01 to 1.5 mm/rev Rapid traverse speed in X/Y/Z: 18/8/5 m/min Technical data and dimensions subject to change.

Condition: as good as new (ex-display), functionality: fully functional, A very nice paper drill is for sale (like new). Type 290, with 2 drilling heads and a sliding table, 230 volts. Powerful motor. User-friendly. You are welcome to test this machine at our location. We can arrange transport and packaging for you and load it into a truck or container. Please inquire about a price including transport (within the Netherlands). Fedpfx Aoz N Ag Isanspp Best regards, Henk Hoos.

Condition: used, functionality: fully functional, EYAN Universal Tool Grinding Machine – Used, including extensive accessories & documentation For sale is a high-quality universal tool grinding machine from the EYAN brand, in good used condition. The machine is ideally suited for the precise re-grinding and production of various cutting tools and is perfect for professional toolmaking as well as for locksmiths, maintenance companies, and training workshops. Thanks to its robust cast iron construction, the machine impresses with its smooth operation, stability, and precise grinding results. Equipment EYAN Universal Tool Grinding Machine Precision chuck / tool holder Extensive adjustment and setting options Machine lamp Grinding wheel mounted Original under-cabinet with storage space Original operating manual Technical documentation Spare parts lists and documents Additional accessories and tools in the under-cabinet (see pictures) 400 V high-voltage connection Condition The machine is in good, used condition with the usual signs of wear and tear. It comes from an operating business and was in use until recently. Scope of delivery EYAN Universal Tool Grinding Machine Under-cabinet Chuck Grinding wheel Original operating manual Technical documentation Spare parts documents Accessories and tools as shown in the photos Application areas Tool and mold making Metalworking Locksmith shops CNC manufacturing Training companies Maintenance and repair Tool grinding machine, universal tool grinding machine, tool grinder, milling cutter grinding machine, drill bit grinding machine, milling cutter grinding, twist drill grinding, turning tool grinding, tool sharpening machine, precision grinding machine, toolmaking, metalworking, grinding machine, EYAN, universal grinder, tool grinder, cutter grinder, tool grinding, tool sharpening, 400V, industrial, workshop machine, mechanical engineering, grinding technology. Fpsdpezhx D Ijfx Aanjp An inspection and functional test are possible at any time by prior arrangement. Net price, plus 19% VAT.

Condition: used, A Felder FD 21 Professional dowel drill, in mint condition, for drilling dowel holes and other rows of holes in wooden workpieces. Technical data: - Power: 1.5 kW Fpsdpjz Tzqtsfx Aanop - Drilling depth: 70 mm - Spindles: 21 - Pitch: 32 mm - Swivelling: 90°

Condition: good (used), Machines pictures 1 to 9 Gillardon price 9500,-€ Technical data: - Drilling capacity into solid steel ST 60 32 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 27 - Drill spindle holder MK 4 - Quill stroke 150 mm - 12 drill spindle speeds 102 - 2000 rpm - 3 drilling feeds 0.1 - 0.3 mm - min. / max. distance spindle - table 310 / 610 mm - Drilling radius min / max 400 / 1200 mm - Table height 720 mm - Table size 1200 x 500 mm - Drive 400 V / 1.6 / 2.9 kW - Space requirement approx. W 1200 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the rear side of the machine Machine 2 pictures 10 to 15 HKS 34 MT Price 16.500,-€ Drilling capacity 45mm Table size : 1200 x 560 mm drilling capacity 45mm Spindle holder MK 4 quill stroke 170mm Speed / steps 70-2000 rpm Feed rate / steps 0.1 0.2 0.3mm/rev Motor 2.9 KW Fpsdpfxsu Nm Nie Aanep

Condition: good (used), Year of construction: 2000, Donau Danuflex 145 Donau Danuflex 145 high-speed radial drilling machine, year of manufacture 2000, in SUPER condition CE compliant!! Technical data: Year of manufacture: 2000 Drilling and threading capabilities Drilling capacity in steel: approx. 42 to 45 mm Threading: up to M36 Tool holder / spindle: MK 4 Spindle speed: 15 to 2,800 rpm (infinitely variable) [1, 2, 3] Travel distances & work area Outrigger travel: 1,050 mm Fsdpfxjz Rwpyj Aanjpp Drilling radius: min. 540 mm / max. 1,590 mm Quill stroke: approx. 200 to 220 mm Column stroke (W-axis): approx. 450 mm Column diameter: 195 mm Table & dimensions Work table: typically approx. 1,200 x 750 mm with 5 T-slots Work table height: approx. 905 mm (ergonomic design for standing operation) Feed: automatic / stepless quill feed with electromagnetic feed clutch Equipment (standard): Threading device, hydraulic clamping for outrigger and lifting column, central lubrication and machine light Accessories and equipment: Several work tables About the machine: Offered is a Donau Danuflex 145 high-speed radial drilling machine. This high-speed radial drilling machine is in very good original condition. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Up to 3 fixed machining stations ensure maximum flexibility in the machining of workpieces, both large and small, as well as very long parts. Swivel tables allow the machining of angled bores. Large travel distances and workpiece heights up to 1500 mm are ensured. Effortless, simultaneous positioning to a drilling position in 3 axes. A self-centering spindle head positions itself precisely in centering bores. Concentric countersinking is achieved by self-centering countersinks in the bore. The guides are regularly lubricated by the central lubrication system. The Donau has been mechanically and electrically tested by us. Take the opportunity to inspect and try out the Donau on site under power. You can find more drilling machines from well-known manufacturers on our website.

Condition: used, Year of construction: 1990, bore capacity in steel (diameter) 35 mm throat 330 mm bore stroke 180 mm Fpjdpfx Aoz Euv Eeanep table surface area 765 x 620 mm

Condition: good (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 88-009-01, overall weight: 600 kg, Grinding machine by Jungner, model US-350, including cabinet with accessories – see images. Fodpfxj Afnd Ao Aanopp

Condition: new, bore capacity in steel (diameter) 40 mm throat 290 mm bore stroke 130 mm spindle taper SK 40 spindle turning speed range 70 - 3200 U/min 520 mm 230 mm table surface area 730 x 210 mm connected load frequency 400 V total power requirement 1,1/1,5 kW weight of the machine ca. 0,32 t dimensions of the machine ca. 1,1 x 0,9 x 1,15 m domestic equipments • Digital depth gauge • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Fpjdpfofv H Hqex Aansp Machine base optional.

Condition: new, bore capacity in steel (diameter) 40 mm throat 290 mm bore stroke 130 mm spindle taper SK 40 spindle turning speed range 75 - 3200 U/min 500 mm 230 mm table surface area 720 x 210 mm connected load frequency 400 V diameter of hob max. 80 mm total power requirement 1,1 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 1,1 x 0,9 x 1,2 m domestic equipments • Digital display • Digital depth gauge for quill • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° Fedpfjfv H Huox Aanepp • Chip protection with safety circuit Machine base optional.

Condition: new, Drilling capacity in cast iron / steel ----- 28 / 25 mm Tapping capacity in cast iron / steel ----- 22 / 18 mm Motor ----- 1.1 kW Speed range ----- 75 ~ 3200 rpm Spindle stroke ----- 130 mm Spindle taper ----- MK3 Drill table ----- 380 x 380 mm Base ----- 535 x 360 mm Maximum distance spindle - table ----- 825 mm Maximum distance spindle - base ----- 1220 mm Weight ----- 210 kg INCLUDED * LED work light * Tapping function Fpjdpsga T D Nefx Aanep * 2-speed motor 75-3200 rpm * CE plug * Various tools in a case

Condition: new, WMD25LV - 230V / 1Ph Drilling capacity in steel ----- 25 mm Milling capacity in steel ----- 20 mm Face milling ----- 63 mm Motor ----- Brushless 750W Spindle speed, continuously variable 50 - 3000 rpm Spindle stroke ----- 50 mm Spindle taper ----- MK3 Work table ----- 700 x 180 mm Cross travel ----- 150 mm Longitudinal travel ----- 490 mm T-slots ----- 3x12 mm Overhang ----- 170 mm Fpodpfx Aaoga T Eienjp Distance spindle - table ----- 325 mm Weight ----- 160 KG STANDARD ACCESSORIES * Drill chuck incl. chuck key * Digital depth stop * Digital spindle display * Fine adjustment * Left / Right switch * Milling head, left / right, rotatable 90 degrees * Box with various tools OPTIONAL * Base cabinet € 249.00 excl. VAT

Condition: new, Motor ----- 1100W - 400V - 3-Phase Drilling capacity ----- 32 mm Spindle stroke ----- 120 mm Fpjdpfx Ajga T Hrsanop Spindle taper ----- MK4 Number of speeds ----- 12 Spindle speed ----- 150-2450 rpm Work table ----- 470 x 420 mm Base ----- 580 x 430 mm Column diameter ----- 92 mm Overall height ----- 1720 mm Weight ----- 128 kg Packaging ----- 1430 x 660 x 320 mm INCLUDED * Digital depth stop * CE guard * Laser device * LED lighting * CE emergency stop * Drill chuck with MK4 taper * Ejector pin

Condition: excellent (used), HEIDENHAIN TNC-310 Working travels 500x260x480 mm (+ spindle stroke 160 mm) cross table 880x320mm additional with Manual hand wheels Spindle speeds 100-9000 Rpm Misc accessories MARCELS MASCHINEN CH Fpsdpfjfrbtdex Aanep

Condition: new,

Condition: used, Drill sleeve, MK 4 Length 170 mm Diameter 63 mm Fodpfx Aasb Tyqajnepp

Condition: new, bore capacity in steel 30 mm threading cutting capacity: M20 throat 260 mm bore stroke 125 mm spindle taper MK 3 spindle turning speed range 80 - 1440 / 180 -3200 U/min transmission ratio 2 Stufen column diameter 110 mm table surface area 500 x 365 mm total power requirement 0,8 / 1,4 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 0,4 x 1,2 x 1,9 m Equipment: Fpjdpfx Aaofg U Tpsnsp - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: new, bore capacity in steel (diameter) 50 mm bore capacity in cast iron (diameter) 60 mm threading cutting capacity: M36 throat 400 mm bore stroke 230 mm spindle taper MK 4 feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U spindle turning speed range 54 - 1032 U/min transmission ratio 12 Stufen column diameter 200 mm table surface area 550 x 550 mm total power requirement 3,0 kW weight of the machine ca. 0,72 t dimensions of the machine ca. 0,6 x 1,2 x 2,6 m Fsdpfx Aasfg U Ttjnspp Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: new, Motor: 750W - 230V - 1 Phase Drilling capacity: 20 mm Spindle stroke: 85 mm Spindle taper: MK2 Number of speeds: 16 Spindle speed: 220-2840 rpm Work table: 305 x 305 mm Base: 460 x 280 mm Column diameter: 72 mm Overall height: 990 mm Weight: 60 kg Packaging: 820 x 500 x 290 mm Fsdpfx Aaok Iuqysnjpp INCLUDED * Digital depth stop * CE protective shield * Laser guide * LED lighting * CE emergency stop * Drill chuck with MK2 taper * Ejector pin

Condition: new, bore capacity in steel (diameter) 40 mm throat 275 mm bore stroke 120 mm spindle taper MK 4 turning speed range 75 - 3200 U/min 190 mm 490 mm table surface area 700 x 210 mm connected load frequency 400 V diameter of hob max. 80 mm total power requirement 1,1/1,5 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 0,8 x 0,75 x 1,85 m Fjdpfx Asupw Uzoanspp Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank

Condition: new, bore capacity in steel (diameter) 16 mm throat 180 mm bore stroke 85 mm spindle taper MK 2 spindle diameter 47 mm Fodpfjupxcysx Aanopp spindle turning speed range 320 - 3300 U/min 230 mm 100 mm table surface area 420 x 155 mm connected load frequency 230 V 900 x 600 x 300 cm total power requirement 0,75 kW weight of the machine ca. 8o Kg dimensions 0,7 x 0,7 x 0,8 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank

Condition: new, grinding range 2 - 13 mm sharp cornered angle min./max. 90 - 140 Grad connected load 230 V Fsdpfxeupxdqs Aanopp weight of the machine ca. 10 Kg dimensions of the machine ca. 0,35 x 0,2 x 0,2 m