Used Twist Drill Grinding Machine for sale (65,333)

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: E1TAH0029, grinding length: 600 mm, grinding width: 300 mm, grinding wheel diameter: 304 mm, table length: 600 mm, table width: 300 mm, TECHNICAL DETAILS Grinding length max.: 600 mm Grinding width max.: 300 mm Distance from table surface to spindle center: 585 mm Grinding wheel dimensions: 304 x 31.75 x 76.2 mm Table and magnetic plate Table size: 600 x 300 mm Magnetic plate: 600 x 300 mm Axis movements Table longitudinal movement, hydraulic: 650 mm Transverse movement, automatic: up to 310 mm Machining: fully automatic in 3 axes Spindle and power Grinding spindle power: 3.7 kW Spindle speed, frequency inverter, max.: 2,100 rpm MACHINE DETAILS Dimensions and weight Dimensions: approx. 2,700 x 1,600 x 1,850 mm Machine weight: approx. 1,990 kg Cgodpfxszgux Se Ahvow EQUIPMENT Fully automatic machining in 3 axes Touchscreen control panel with program management Automatic central lubrication Cooling system with automatic paper filter Enclosed splash guard with lighting Electronic handwheel

Condition: used, Model: CW Serial No: 26520 Capacities: Maximum Swing Over Bed: 430mm Maximum Distance Between Centres: 2500mm Wheel Dimensions: 660x 75mm Work Head Speeds: (3) 20 – 160rpmrpm Wheel Head Speeds: 735rpm Table Swivels: Electrics: 415v, 3ph, 50 Cycles Motors Wheel Head: 20 HP 975rpm Work Head: 3HP 1120rpm Complete With: 2 No 2 Point Open Steadies Complete Tailstock Mounted Wheel Dressing Attachment Coolant Codpfx Asyx Hx Dohvjgw Approximate Dimensions: 6,750 x 2000 x 1800mm Approximate Weight: 9,000kg

Condition: excellent (used), 36" Magnetic Table# Cjdozh Ngmopfx Ahvogw Model No 18

Condition: excellent (used), Specification - Work head Maximum work piece weight between centres 100kg Speed range30/450 rpm Centre - standard/reduced to 5MT / 3MT Swivel angle, clockwise / counterclockwise 15° /90° Wheelhead (X axis) Maximum diameter ground: using a 350mm dia wheel - 300mm Cgsdpfozh Nfcox Ahvsw Using a 300mm dia wheel - 350mm Total infeed 245mm Maximum programmable dia infeed rate 100mm/min Minimum programmable increment (dia) 0.001mm Swivel range clockwise / counterclockwise 190° / 45° External grinding wheels Wheel size (left) 350 x 50 x 127mm Wheel size (right) 300 x 25 x 127mmm Spindle speeds 1775, 2068, 240rpm Motor 4kW Internal grinding wheels Wheel size 19 - 38mm Wheel spindle speeds 16500,24000,10500rpm Motor 2.2kW Table (Z Axis) Maximum grinding length between centres: 1300X - 700 - 700mm 1300X - 1000 - 1000mm Maximum traverse speed 5000mm/min Minimum programmable increment 0.001mm

Condition: excellent (used), Year of construction: 2022, Specification: Vertical Drill Block with 13 Spindles Horizontal drill block with 4 spindles in the X Horizontal drill block with 2 spindles in the Y Grooving Saw D=100mm Plausibility check 10kw tool change spindle 4 position tool changer Workpiece length max 200-3050mm Workpiece width 70-850mm Workpiece thickness 8-56mm Cgjdpfxezdki Us Ahvjw Powertouch screen Woodwop for machine Energy Saving Mode

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: LEAN PRO, FANUC 16 T FULLY FUNCTIONAL Cgjdpfx Aezfx D Nehvjw RANGE OF ACCESSORIES FILTRATION SYSTEM MIST EXTRACTOR MACHINE MANUALS

Condition: used, Year of construction: 2011, total width: 1,500 mm, total length: 3,000 mm, total height: 1,750 mm, Colour: White Empty weight: 450 kg - Year: 2011 - Documentation available: No - CE certificate present: No - Serial number: 11060282 - Main motor power [kW]: 1.3 - Table length [mm]: 2000 - Table width [mm]: 520 - Max. drilling stroke [mm]: 60 - Number of spindles [pcs]: 27 Cgjdpfx Ahezizqgevjw - Spindle speed: Manual - Min. spindle speed [rpm]: 2820 - Max. spindle speed [rpm]: 2820 - Distance between spindles [mm]: 30 - Workpiece clamps [pcs]: 10 - Workpiece support/Guide: Traverses - Drills included: Yes - Voltage [V]: 400 - Current consumption [A]: 3 - Fuse [A]: 16 - Power [kW]: 1.5 - Transport dimensions: 3000mm x 1500mm x 1750mm (l x w x h) - Transport weight [kg]: 450kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 1761-1700, 457 x 152mm capacity. Equipped with magnetic chuck, power rise and fall to wheel head, table guard, coolant system, and dust extraction. SPECIFICATION Jones & Shipman Model 540P Working Surface of table 457 x 152mm Longitudinal traverse of table, hand and hydraulic 483mm Total cross traverse of table, hand and hydraulic 168mm Floor to table height 1035mm Table traverse speed range per min 1.5 – 18m Cross feed range per stroke at each reversal 0.178 – 1.78mm Micrometer cross feed graduated in Vertical feed adjustment in increments of 0.002mm Vertical movement of wheelhead (max) 280mm Wheel spindle center to table (min) 50mm Size of grinding wheel 180 x 13 x 31.75mm bore Speed of wheel 2880rpm Wheelhead motor 1.5kW Hydraulic pump motor 0.55kW Machine in Imperial execution Cgjdenxi Uuepfx Ahvjw MACHINE EQUIPPED WITH Magnetic chuck Power rise and fall to wheel head Table guard Wheel guard Coolant System Dust extraction

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: BO 94392, A familair machine in any toolroom, this Jones and Shipman 540P is equipped with a 6″ x 18″ magnetic chuck, power rise and fall, coolant system and dust extraction. A toolroom institution: USED Jones & Shipman Model 540P Horizontal Spindle Surface Grinding Machine Specification Csdjnxi R Uspfx Ahvogw Working Surface of the table 457 x 152mm Longitudinal traverse of table, hand and hydraulic 483mm Total cross traverse of table, hand and hydraulic 168mm Floor-to-table height 1035mm Table traverse speed range per min 1.5 – 18m Cross-feed range per stroke at each reversal 0.178 – 1.78mm Micrometer cross feed graduated in Vertical feed adjustment in increments of 0.002mm Vertical movement of wheelhead (max) 280mm Wheel spindle centre to table (min) 50mm Size of grinding wheel 180 x 13 x 31.75mm bore Speed of wheel 3000rpm Wheelhead motor 1.5kW Hydraulic pump motor 0.55kW Machine in Imperial execution Machine equipped with Magnetic chuck Power rise and fall to wheel head Table guard Wheel guard Coolant System Dust extraction Lighting

Condition: ready for operation (used), functionality: fully functional, grinding length: 800 mm, grinding width: 350 mm, Magnet, 800 x 350 mm. Cedpfx Aozimmmshvogw

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, The machine is in good working order. See the video. Cgjdezimhwspfx Ahvjw

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, The machine is in good working order. See the video. Cgjdpfx Ahjzimgyjvow

Condition: used, Year of construction: 2016, operating hours: 5,613 h, total height: 2,350 mm, total length: 4,300 mm, total width: 1,880 mm, Colour: Grey Empty weight: 1.310 kg Cjdpfx Aozh Hkcohvogw - Year: 2016 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: AB/226310 - Operating hours: 5613 - Main motor power [kW]: 5.5 - Number of controlled axes [pcs]: 1 - Working range X [mm]: 3050 - Working range Y [mm]: 900 - Working range Z [mm]: 60 - Number of milling spindles [pcs]: 1 - Tool holder interface: ISO30 - Max. spindle speed [rpm]: 18000 - Horizontal drilling unit: Yes - Horizontal drilling spindles [pcs]: 6 - Max. drilling depth [mm]: 35 - Vertical drilling unit: Yes - Vertical drilling spindles [pcs]: 12 - Max. drilling depth [mm]: 60 - Manual operation: Yes - Control: SCM Xilog - Software: Xilog Plus - Saw unit present: Yes - Safety feature: - Spindle speed control: Continuously adjustable - Transport dimensions: 4300mm x 1880mm x 2350mm (l x w x h) - Transport weight [kg]: 1310kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), Year of construction: 2012, · V200 Plate drilling machine (executed with a VD40 drilling unit and an X-Y coordinate table). · VTC 8/40 tool changer (8 places). · Hydraulic numbering unit VN 1/16 · Deburring unit VDB 2 (each hole is automatically deburred). Max. length 1.400 mm* Cedpfowphgdox Ahvjgw Max. width : 1.000 mm Min/max. thickness : 3 - 60 mm Capacity : : 600 kg * Longer lengths (max. 2 400mm) possible by automatic repositioning.

Year of construction: 2007, condition: good (used), ■ V600 Drilling machine (moveable drilling cabinet, executed with 1 horizontal drilling unit and automatic tool changer) Codpfx Aoq Hgg Uohvjgw ■ Drilling table with power rail length 15 metres, effective length 12 metres ■ Hardware and software (includes VACON 110 machine control) ■ Safety devices (safety bumpers) ■ Year of construction 2007

Condition: used, total width: 1,000 mm, total length: 2,200 mm, total height: 2,500 mm, Empty weight: 2.500 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Power [kW]: 6 - Y-axis travel [mm]: 1000 - Table length [mm]: 1300 - Table width [mm]: 600 - Drilling depth [mm]: 150 - Drilling capacity [mm]: 32 - Max. Reach [mm]: 1000 - Min. spindle speed [rpm]: 30 - Max. spindle speed [rpm]: 2650 - Transport dimensions: 2200mm x 1000mm x 2500mm (l x w x h) - Transport weight [kg]: 2500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Cgedpfx Ajwnilxshvsw Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 1998, Hofmann HT 200 U frame dowel and elongated hole drilling machine with angle adjustment Special drilling machine for stair construction, window construction, and universal applications through pneumatic height adjustment. Angled dowelling and picket drilling can be easily achieved thanks to the rotating drilling unit. Motor with pole change, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Motor start with practical handle switch Precision chuck with two inserts 16mm and M10 thread Table size approx. 1100 x 240mm Linear laser for precise positioning of the workpiece Drilling unit can be rotated 65 degrees to the left and right Pneumatic adjustment of the machining height, dowelling on two levels without readjustment Cgodpfsyfta Tox Ahvsw The desired drilling heights can be set for each drilling level with a handwheel and digital counter; switching is then done pneumatically from the front Crossfeed approx. 320mm, stepless or in a 12mm grid Drilling stroke approx. 200mm 2 pneumatic workpiece clamps, can be placed at the front and rear of the table 2 swiveling workpiece supports 2 side stops, also usable as a front support Undercarriage Dust extraction connection 80mm 4 used but good drill bits 9, 12, 16, 19mm Few paint spots have been repaired, very good condition, see original photos A used swiveling elongated hole drilling machine in this condition is rarely available. CE marking Operating manual Dimensions approx. 1200 x 1200 x 1200mm (LxWxH), weight 310kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Technical details grinding length 800 mm grinding width 400 mm workpiece height 375 mm weight of the machine ca. 3,5 t Additional information CNC Precision Surface and Profile Grinding Machine This machine is ideally suited for precision applications in tool and mold making. Technical Details: Grinding surface: 800 x 450 mm Grinding area: 800 x 400 x 375 mm Table load (max.): 700 kg X-axis = Longitudinal movement of worktable Table longitudinal stroke: 20 - 850 mm Table drive: Electromechanical with toothed belt drive Table speed: 5 - 35,000 mm/min Table setup: Electric handwheel and direction push button Y-axis = Vertical movement Distance from table to spindle center: 140 - 525 mm Vertical drive: Electromechanical with ball screw Vertical speed: 50 - 2,000 mm/min Vertical adjustment via electric handwheel and direction pushbuttons Minimum infeed 0.001 mm Measuring system: glass scale Z-axis = Transverse movement Maximum transverse travel 400 mm Drive type: electromechanical with ball screw Transverse speed 50 - 2000 mm/min Csdpfx Ahszimvnjvogw Transverse travel adjustment via electric handwheel and direction pushbuttons Measuring system: glass scale C-axis = Grinding spindle Grinding spindle motor 7 kW Grinding spindle speed 1400 rpm Grinding wheel standard 300 x 50 x 76.2 mm Spindle bearing: Precision roller bearing Lubrication: Lifetime lubrication Connected load: approx. 19 kVA Total weight: 3500 kg Equipment: - Electro-permanent magnetic chuck Clamping surface 800 x 400 mm, Pole spacing 18 mm, with 16-stage holding force control and automatic Magnetic pole reversal for demagnetization - Leveling blocks For setting up and leveling the machine - Grinding wheels and two flanges - Partial enclosure Open at the top for loading with a sliding door - Dressing system Consisting of a holder for a prism arm or fork dresser Practicle arm for single-point diamond (MK O) or shaped diamond - Grinding spindle speed control Peripheral speed 10-32 m/s The peripheral speed of the grinding wheel is kept constant (V-constant control) with a 7 kW grinding spindle motor - Universal paper belt filter unit UPF 100 Tank capacity approx. 280 liters, Pump capacity 20 liters/minute at 1.5 bar - Air purifier Flow rate approx. 1000 m³/h - Compressed air ports For easier removal of large workpieces with a manual compressed air valve in the machine's work area. - Mobile balancing unit With optical operator guidance for dynamic balancing of the grinding wheel directly in the machine. Imbalance size and position are calculated automatically. With transport case. - Cleaning set Hand-held impulse nozzle for cleaning the work area - Documentation/Manual For sale is our reliably operating grinding machine from mold making. The machine was purchased new in 2016 and is in good technical condition, having been used for a maximum of 20 hours per week. It runs perfectly and is being sold solely due to an investment in a larger model.

Condition: good (used), Year of construction: 2001, functionality: fully functional, Technical details grinding length 4200 mm grinding width 1300 mm workpiece height 550 mm Control SIEMENS 840 D magnetic clamping plate 4200 x 1300 mm segment head diameter 1400 mm grinding motor turning speeds up to 320 U/min. grinding motor 306 kW weight of the machine ca. 50,0 t Additional information Segment dimensions: 120/106 x 41 x 250 mm Number of segments: 1 set = 26 pieces Grinding motor feed: 0.5 - 35 m/min, infinitely variable Cedpezill Uofx Ahvsgw Grinding motor feed: - in steps: 0.002 - 1 mm continuous: up to 5 mm/min. infinitely variable Equipment: * CNC-control SIEMENS Sinumerik 840 D * Automatic hydr. swivelling of the grinding motor from hollow to cross grinding * NC-controlled adjustment of the Marposs measuring head by means of precision support. - new grinding dimensions can be entered into the control, whereby the the grinding head automatically adjusts to the corresponding height. * Dresser with adjustment axis in the machine bed * Coolant system * Electro-magnetic table * Switch cabinet * Oil mist extraction * Documentation Dimensions (length x width x height) Bed: 11800x2200x1400 mm, weight 27500 kg Grinding head: 3000 x 2500 x 3100 mm, estimated weight 14 t 2 x Oil mist extraction: 1200 x 800 x 2000 mm each Control panel: 1200 x 800 x 400 mm Small control cabinet: 1400 x 1400 x 800 mm 2 x gears each 1200 x 800 x 500 mm Control cabinet: 1600 x 800 x 2000 mm Control cabinet: 3400 x 600 x 2400 mm

Condition: good (used), Year of construction: 2007, functionality: fully functional, Technical details grinding length 600 mm grinding width 400 mm workpiece height 375 mm Additional information CNC Precision Surface and Profile Grinding Machine Grinding area: 600 x 400 x 375 mm Grinding spindle motor: 3.7 kW Table drive: hydraulic Cross-axis drive: electromechanical Grinding wheel: 300 x 50 x 76.2 mm Peripheral speed: 10 - 32 m/s Electromagnetic plate: 600 x 400 mm with holding force control and automatic magnetic pole reversal for demagnetizing Features: Partially enclosed, open-topped loading compartment with a sliding door Cleaning kit for cleaning the work area with hand-held impulse nozzle Cgodpfxoziligo Ahvew Holder for prism arm with single-point diamond, MK 0 Grinding spindle speed control with V-constant controller Universal paper filter unit UPF 100, tank capacity approx. 280 liters Coolant pump: 20 liters/minute at 1.5 bar With mud box Machine light Grinding wheel flanges

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Technical details grinding length 600 mm grinding width 300 mm workpiece height - mm total power requirement 7 kW weight of the machine ca. 2,7 t dimensions of the machine ca. 2800x2200x1890 mm Additional information Horizontal surface grinder in excellent condition The machine has been in operation for only a few hours. Work area • Travelling distance X-axis: 765 mm • Travelling distance Y-axis: 340 mm • Table dimensions: 300 x 630 mm • Scale ring division Y-axis: 0.02 mm • Scale ring division Z-axis: 0.005 mm • Autom. transverse infeed: 0.1-8 mm Cgsdpfjzild Rox Ahvew • Autom. vertical infeed: 0.005-0.05 mm Drive unit ratings • Motor rating main drive: 5.5 kW • Motor rating servo-drive: 0.5 kW Dimensions and weights • Total weight: 2,700 kg • Dimensions: 800 x 2200 x 1890 mm • Grinding wheel dimensions: 350 x 40 x 127 mm Accessories: 2-axis position display Knuth Xpos 3.1 Grinding wheel, Grinding wheel flange, Balancing arbor, Balancing stand, Halogen work light, Magnetic chuck 600 x 300 mm Leveling screws, Operating tools,

Condition: good (used), Year of construction: 1995, functionality: fully functional, Technical details internal diameter 800 mm grinding depth 500 mm swing diameter 850 mm weight of the machine ca. 6,4 t Additional information Used internal cylindrical grinding machine with face grinding device in special design with enlarged swing diameter and extended, hydraulic transverse movement Reconstructed and modernized 1995 in the Glauchau manufacturer’s plant, put into operation 1996 Cjdjzilaxopfx Ahvsgw 1. TECHNICAL DATA 1.1 Working area Grinding diameter in the workpiece guard internal grinding, min./max. mm 30/630(800) External grinding, max. mm 800 Grinding depth, up to approx. mm 500 Table stroke mm 800 Workpiece diameter, max. mm 800 Swing diameter in workpiece protection, max. mm 800 Without workpiece protection, approx. mm 850 Distance from workpiece spindle head to grinding spindle carrier, max. mm 1225 Adjustment of the internal grinding device on the table, max. mm 545 1.2 Workpiece headstock Cross shift, max. mm 650 Cross adjustment via gear motor and positioning device with HEIDENHAIN digital position display Swivel, max. degrees 15 Workpiece spindle Speeds rpm 16/22/32/ 45/63/90/ 125/18/250 Load capacity, max 1000 Spindle head (with bayonet flange) DIN 55021 size 11 Machine accessories: 2-axis digital displays made by HEIDENHAIN Coolant system with magnetic separator Fixators (machine shoes) Various grinding wheels Diamond dresser Large face plate Internal and face grinding device Halogen machine lamp Machine documentation

Condition: excellent (used), operating hours: 4,589 h, functionality: fully functional, center height: 100 mm, grinding length: 400 mm, Studer S20-2 Operating hours: 4589 Centre height: 100 mm Max. grinding length: 400 mm Internal and external grinding Extra spindle Coolant filtration system Large number of accessories Cabinet Documentation Csdpfszgtwajx Ahvsgw Machine is powered for inspection

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Jung JF 520 D year of manufacture 1988 magnet 500 x 175 mm max. grinding area 600 x 220 mm variable speed variable magnetic field strength automatic start diaform coolant/filter tank Cgodpfxozba Nge Ahvew 3 x flange 1 x clamp documentation machine is powered on for inspection

Condition: good (used), functionality: fully functional, Jung F40 sinusoidal magnet, 300 x 150 mm cooling water tank Csdpfezbbkljx Ahvjgw 9x grinding disc documentation the machine is powered on for inspection.