Used Underfloor Kappen Saw for sale (5,807)

Condition: good (used), functionality: fully functional, Robust RAPID PK 100 table saw in a solid design, featuring a sliding table and adjustable fence system. The saw blade can be tilted up to 45°. With a saw blade diameter of 250 mm, the maximum cutting height is approximately 75 mm. The cutting width to the right of the saw blade is approximately 600 mm. The saw arbor is driven by a narrow V-belt. A saw blade is included in the scope of delivery. Technical data: Motor power: 3 kW Three-phase motor, protection class IP54 Motor speed: 2,860 rpm Saw arbor drive via narrow V-belt Saw arbor speed: 5,200 rpm Table size: approximately 850 × 700 mm Cutting width to the right of the saw blade: approximately 600 mm Cutting height: approximately 75 mm with a Ø 250 mm saw blade Lhsdpfjz Eh Nrsx Ah Ssn Saw blade can be tilted up to 45° Dust extraction port on the rear of the machine: Ø 100 mm Dimensions: approximately 800 × 1,200 × 1,400 mm Weight: approximately 250 kg Equipment: Sliding table Length/cross stop with scale Parallel fence Tiltable saw blade up to 45° Dust extraction connection Ø 100 mm Includes saw blade The machine can be inspected and tested under power after arranging an appointment. Transport is possible for an additional charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information is without guarantee.

Year of construction: 2026, condition: new, – Length: 300 cm (also available in a length of 150 cm) – Roller track width: 300 mm – Roller width: 205 mm – Plastic rollers to prevent scratching of the material – Length stop Ljdpsz Ecrnefx Ah Sohn – Easy installation for both left- and right-handed users – Working height: min. 880 mm, max. 1020 mm (The saw machine shown in the photo is available at an additional cost.)

Condition: used, Year of construction: 1998, Used machine Ljdpfx Aoz Dyd Ejh Sshn Year of manufacture: 1998 Equipment and technical data: Cutting length: 5300 mm Cutting height: 2200 mm with Super Cut scoring device Includes: intermediate workpiece support on 3 supports Includes: 2 units of longitudinal stop with manual scale Availability: short-term Location: Flörsheim

Condition: excellent (used), CATALOGUE NUMBER 7906 Technical data: - track width 400mm - working width of the roller 400mm - max. blade diameter 450mm - blade bore diameter 70mm - max. cutting height 160mm - table width with extension 720mm - table length 1900mm - from above: - feed fingers/ejectors 2 rows - sliding roller, metal, pressure roller - feed fingers/ejectors - sliding roller, metal, pressure roller - saw mandrel - smooth sliding roller, metal, sliding - from below: - guide rail - feed fingers - track - electric body lifting - central track lubrication - 2 feed speed types + stepless - feed motor 0.9kW - main motor 30kW - diameter of the dust extraction nozzle 260mm Lodpfx Ahjzx Rqhj Sshn - overall dimensions (L/W/H) 2350x1800x2200mm - weight approx. 2000kg ADVANTAGES – Made in Italy – New track and slides – Very good condition – Used multi-blade saw Net price: 55900 PLN Net price: 13000 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Condition: new, functionality: fully functional, power: 26 kW (35.35 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 540 mm, cutting width (max.): 630 mm, control type: PLC-controlled, actuation type: electric, rotational speed (max.): 200 rpm, rotational speed (min.): 20 rpm, total height: 2,700 mm, total length: 2,650 mm, total width: 4,385 mm, overall weight: 6,500 kg, table height: 800 mm, Equipment: CE marking, documentation/manual, lighting, motor brake, rotational speed infinitely variable, Advantages of the High-Performance Bandsaw HBM540A SpeedCutting Technology (optional) By combining SC-Performance saw band guides, a high-performance coolant system, dynamically controlled feed rate, and a specially optimized auto-feed control, you can achieve maximum performance and tool life from the saw band used. Prepared for Automation A powerful sawing machine concept places high demands on material handling. The high-performance bandsaw automatons of the HBM series are often configured as automated sawing centers. Therefore, the machines are already equipped in the basic version to connect extensive peripherals. Servo Feed System The saw feed is carried out by means of a ball screw and a servo motor. This results in significantly shorter idle times and more precise feed rates. Your advantage: higher cutting performance and longer band life! Sensitive Behringer Cutting Pressure Control increases the cutting performance when sawing tubes and profiles, as it automatically adjusts the saw feed of the industrial saw to the changing material cross-sections. Due to its arrangement directly at the back of the saw band, the system regulates quickly and precisely. Optimal Chip Removal The highest cutting performance of the industrial saw places high demands on chip removal. The wide, funnel-shaped machine stand allows for free chip flow into the underlying chip conveyor with an integrated coolant tank. The discharge height of 800 mm or optionally 1,200 mm allows the use of large chip containers. Economical Use of Carbide Saw Bands due to the robust design of the industrial saw, the use of the latest servo technology, and well-planned chip removal. Precise Guide System in Portal Design The combination of a stable, low-vibration saw frame and the linear guide system in portal design ensures the best cutting results and maximum service life of the bandsaw. Band-Guiding Parts Made of Gray Cast Iron are made by Behringer and ensure vibration damping directly at the cutting interface, thereby increasing the tool life. Automatic Guide Arm Adjustment This means that the metal bandsaw offers optimal sawing results without adjustment effort - even with frequently changing material widths. Lsdpfoz Rzq Iox Ah Sjhn

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Kasto Kastodisc M10 Vertical Circular Saw, Metal Cutting Saw Manufacturer: Kasto Type: Kastodisc M10 Metal Cutting Saw Year of Manufacture: 2009 Condition: Used, very good, ready for demonstration Scope of Delivery: - Documentation - Coolant system - 1 x Saw blade (used) - Material stop, 1000 mm Lhodpfxjztyldj Ah Son

Condition: excellent (used), CATALOG NUMBER 7918 TECHNICAL DATA - Max. saw blade diameter: 450mm - Spindle diameter: 30mm - Pneumatic top clamp - Blade guard - Blade guard also functions as a hold-down clamp - Pneumatic blade feed - Cutting height (at 250mm width): 120mm - For lower cutting heights, the cutting width is increased - Main motor power: 6kW - Extraction nozzle diameter: 120mm - Table dimensions (LxW): 650x850mm - Table height from base: 1000mm - Roller tables: - Infeed roller table + stop: 3180mm - Outfeed roller table + stop: 2450mm - Roller width: 360mm - Operating pressure: 8 bar - Overall machine dimensions (without roller tables) LxW xH: 1300x1050x1800mm - Weight: 550kg FEATURES – 2 roller tables – Pneumatic blade stroke Ljdpszkgzyjfx Ah Sehn – Used saw, in perfect condition Net price: 14,900 PLN Net price: 3,550 EUR (based on EUR rate of 4.2) (Prices may change with significant rate fluctuations)

Condition: used, Striffler Type 2750-E double mitre circular saw for precise mitre and cross cuts in timber profiles, mouldings and frames. The machine is ideally suited to mass production in the window, door and furniture manufacturing sectors, thanks to its two pneumatically swivelling saw units and electronic positioning. Technical data: - Cutting length: approx. 2,200 mm - Mitre angle: 45° – 90° - Workpiece: max. 50 × 70 mm Lhodpfx Ahszryu Ae Sen - Further details: See PDF

Condition: reconditioned (used), Year of construction: 2002, KASTOpos GA 4" Fully automatic miter bandsaw machine – KASTO Type/Model: KASTOpos GA 4 Condition: Used, partially overhauled in 2026 Year of manufacture: 2002 Work performed / partial overhaul Lhodpfx Ahsz Sqlko Sen • Machine thoroughly cleaned and technically inspected • Machine housing and machine body repainted • Mechanical, hydraulic, and electrical functions checked • Saw blade, material clamping device, and feed system checked and adjusted • Band guide and all machine movements checked for proper function • Safety and control elements checked • Necessary repair work carried out as part of the partial overhaul • Final complete functional test performed • Roller conveyor disassembled, cleaned, technically inspected, and repainted • Rollers and bearing points of the roller conveyor checked • Roller conveyor then reassembled and functionally tested The machine is in technically sound and visually well-maintained condition. This is a partial overhaul, not a complete mechanical general overhaul. Technical data Cutting range at 90°: Round 400 mm, Flat 400 x 320 mm, Square 320 x 320 mm Cutting range at 45°: Round 320 mm, Flat 320 x 320 mm, Square 320 x 320 mm Cutting range at 60°: Round 240 mm, Flat 210 x 320 mm, Square 220 x 220 mm Cutting speed, stepless: 16 to 160 m/min, frequency-controlled Material feed (single stroke): max. 750 mm Shortest remaining piece length: Automatic: approx. 100 mm Single cut: approx. 10-30 mm Saw motor power: approx. 4.4 kW Total connected load: approx. 7.4 kW (380 V / 50 Hz) Machine weight: approx. 3,000 kg Inquiry item: Shipping costs will be provided in a separate quote.

Condition: as good as new (ex-display), functionality: fully functional, empty load weight: 380 kg, Dear Sir or Madam, Lhjdpfxowhmtte Ah Ssn We are offering you a "HOLZKRAFT" vertical wood band saw. Model: HBS 633S - Quick-action saw blade tensioning system - Precision saw blade roller guide - Fast and precise cutting height adjustment via handwheel and rack and pinion with millimeter scale - Safety switch for automatic shutdown when the door is opened - Large cast parallel stop - Angle stop - Table tilt via rack and pinion and handwheel - Saw blades Technical specifications: Cutting height 90° max. 400 mm Maximum cutting width with stop: 570 mm Maximum cutting width without stop: 610 mm Cutting speed 1,630 m/min Saw blade length 4,600 mm Table dimensions: Table length 830 mm Table width 600 mm Table height 830 mm Table tilt 0 – 45° Machine dimensions L x W x H 119 x 82 x 206 cm Machine weight 380 kg

Condition: excellent (used), Year of construction: 1983, Equipment: documentation/manual, lighting, We are offering this very well-maintained Mössner Rekord bandsaw, manufactured in 1983. Manufacturer: Mössner Model: Rekord Year of manufacture: 1983 The machine includes extensive accessories such as band guides, saw blades with various tooth configurations, etc. If you have any questions or require further information, please feel free to send us a message or call us. Ljdpjzv Imbjfx Ah Sohn

Condition: good (used), Year of construction: 2010, Blade diameter 315 mm 2 speeds Ljdpfx Aoz Tfaleh Sjhn Coolant system

Condition: used, Felder K700 panel saw, year of manufacture 2006, good condition, 880 mm table width, 100 mm cutting height, 1300 mm panel table length, approx. 300 kg Prices subject to change, errors, printing and typesetting errors reserved Ljdpfsvrvlujx Ah Sjhn

Condition: as good as new (ex-display), Demonstration Machine The professional block bandsaw for logs up to 100 cm in diameter from Forestor Pilous is the result of decades of sawmill tradition, specifically designed for professional sawyers. Equipped with a telescopic lever log turner, log lifter, and a powered log lifter for horizontal log feed. Features 5 hydraulic angle stops and 2 log clamping devices. The saw is standard for logs up to 7.6 m long and can be extended on request. Automatic feed with stepless speed adjustment. Electric height adjustment controlled from the operator panel. 8.4-inch touchscreen LCD for height settings, with two speeds for height adjustment. Includes stationary operator panel. Automatic rapid return. CE certified. Technical Data: Max. log diameter: 1000 mm Max. board width (plank width): 850 mm Max. saw blade rise: 875 mm Min. cutting height: 30 mm Max. frame clearance: 450 mm Cutting length of base section: 7.6 m Extension section length: 3 m Saw blade drive: 15 kW Portal travel motor: 1.5 kW Lift motor: 0.55 kW Hydraulic unit motor: 5.5 kW Saw blade dimensions: 5350 x 35 ÷ 40 x 0.9 ÷ 1.1 mm Weight of base version: 2580 kg Lhsdpfsvrvqwjx Ah Sen Extras not included in the price. (Image for reference only)

Condition: as good as new (ex-display), Demonstration machine Extra strong, robust, durable bandsaw mill for logs with a maximum diameter of up to 1000 mm. Includes soft starter, can be extended with extension sections. Automatic feed with infinitely variable speed. Electric height adjustment controlled from the operator panel. Equipped with telescopic log turner, log lifter, log lifter with drive for horizontal log feed. Hydraulic angle stops. Includes 2 log clamping devices. Hydraulic saw blade tensioning. Electrically adjustable saw blade guide. CE certified. Technical data: Max. log diameter: 1000 mm Max. board width (slab width): 920 mm Max. saw blade stroke: 900 mm Min. cutting height: 30 mm Max. frame opening: 365 mm Cutting length of base section: 7.5 m Extension section length: 3 m Lhedpevrvq Dofx Ah Son Saw blade drive output at 100% duty cycle: 22 kW Feed motor at 100% duty cycle: 3 kW Lift motor: 0.55 kW Hydraulic unit motor: 5.5 kW Saw blade dimensions: 5960 x 60 x 0.9-1.3 mm Weight of base version: 2800 kg This machine includes the following accessories: CTR-1000H60-Ver3 – 3m extension section (extends the cutting length by 3m). CTR-VOR-1300H – Pre-cutting device (for maximum saw blade service life). CTR-AMP – Ammeter (shows the current consumption). CTR950H-KSD – Chain log turner (for hydraulically turning logs). CTR950H-DS – Double-arm log loader (for hydraulic loading). CTR950H-MR – Material chute (allows the end of the pushed material to slide onto subsequent belt or roller conveyors). CTR1000H40-ZUB – Outfeed conveyor for sawn material (allows for very easy material removal or material can be pushed onto subsequent belt or roller conveyors).

Condition: good (used), Code: 0501 Brand: COLOMBO FILIPPETTI Model: VARISPEED VS 85 - CE Standard Lhodps Aaydkefx Ah Son Professional scroll saw , high performance and cutting precision – CE Standard It is ideal for inlay work on wood, plywood, plastics and light alloys in the fields of arts and crafts, model-making, DIY, joinery, and technical and vocational colleges Extremely quiet operation Single-phase 220 volt motor 0,55 kW Blade tension is easily adjustable Electronic speed variator controlled by a foot-operated potentiometer, from 0 to 1500 rpm Large and sturdy work surface tiltable up to 45°, mm 600 x 600 Useful working length 850 mm Max cutting thickness 45 mm (blades 130 mm ) 65 mm (blades 150 mm) Dust extraction connection Overall dimensions mm 1400 x 610 x 1560 h Weight kg 140

Condition: used, ZIM Hülsta Back Panel Saw Manufacturer: ZIM Hülsta-Werke Designation: Back Panel Saw Year of Manufacture: 2014 Serial Number: 380114008 Description: Movable saw unit 2 movable Benz four-spindle drilling units Suitable for milling and drilling operations Tilt drilling RWH drilling Sawing Lhodpsvdb Tbsfx Ah Sen Sawing and RWH drilling Feed roller table Protective enclosure with Leutze laser barrier system Control cabinet Dust extraction piping Control terminal, consisting of: PC, flat-screen monitor EIZO FlexScan S1911 Keyboard and mouse, hand scanner, terminal cabinet Mobile steel container (beige) Handshake signals PC-PLC 1. Data handling is exclusively performed by the PC. 2. The clamping system sends a transmit release (VB.TransmitRelease) to the main PC, which then transmits the head and machining data. 3. The main PC activates a handshake (VB.DataSent) after the data has been transmitted. 4. Then, the VB.TransmitRelease and VB.DataSent are removed from the clamping system. 5. This procedure is triggered again for each new component. More new and used items can be found in our shop! International shipping costs upon request!

Condition: used, Year of construction: 1999, KBN 560 (Ecostar) HSS and segmented circular saw blade grinding machine (CNC controlled) Suitable for the automatic grinding, re-tooth cutting and beveling of HSS and segmented circular saw blades, as well as carbide-tipped circular saw blades, using the deep grinding process with CBN or diamond grinding wheels. Technical data: Working range: Diameter (20) 80 - 560 mm, tooth pitch 1 - 25 mm, number of teeth 2 - 998, saw blade thickness up to 8 mm; Grinding wheels: Grinding wheel diameter 200 mm, grinding wheel bore diameter 32 mm, connection value 5.5 kW (400 V / 50 Hz), weight approx. 980 kg, dimensions W x D x H = 1600 x 1750 x 1996 mm, color blue RAL 5014 / gray RAL 7035. Lhjdpo Aba Rmefx Ah Ssn Accessories: Full enclosure, wet grinding system, automatic central lubrication, program for beveling regularly toothed saw blades, Vario-Zahn software for the automatic grinding of different tooth pitches, measuring grinding program for grinding saws to the same outer diameter, special program for full carbide teeth, machine light. Optional accessories: Extraction system, grinding wheel flange, holder for small saws. Condition: The machine is in good technical condition. Please refer to the attached photos and video for further details regarding the condition.

Condition: excellent (used), Year of construction: 2008, Control panel, suspended, swiveling, and with template holder 5.7″ touchscreen control Variable saw blade speed 2-axis scoring unit, electrically adjustable Parallelogram crosscut table with “RadioCompense” angle cut and length compensation system Pre-set indexing points for 0°, 22.5°, 30°, 45° on the parallelogram crosscut table Rip fence with stop flap and digital dimension display Extendable parallelogram crosscut table with support roller Parallel stop can be lowered under the table in the end position Table extension 600 x 400 mm with integrated storage compartment “ProLock” quick-change system for saw blade Central lubrication including miter stop for cutting acute angles Sliding table length: 3300 mm Cutting width: 1100 mm Cutting width with rip fence: 3400 mm Cutting height: 170 mm Saw blade diameter max.: 500 mm (400 mm with scoring unit) Saw blade speeds: 2000 - 6000 rpm Saw blade tilt: 0 – 46° Motor power: 7.5 kW, 400 V, 50 Hz Working height: 900 mm Dust extraction connection: 80 and 120 mm Ledpfx Aj Aaz E Aeh Sohn Transport dimensions approx. L x W x H: 3550 x 1850 x 1620 mm Weight approx.: 1800 kg

Condition: used, Weiss sharpening machine for sharpening small and medium-sized circular saw blades. The machine is mounted on a workbench. Lhodpfxjzrx H De Ah Sjn Technical data: - Saw blade diameter: max. approx. 600 mm

Condition: used, The Trennjäger circular saw sharpening machine is suitable for sharpening small circular saw blades. It is designed for the precise resharpening of saw blades in woodworking applications. Technical data: - Saw blade diameter: max. approx. 300 mm Lodjzrx H Rspfx Ah Sohn

Condition: good (used), Sawing and Drilling Machine KALTENBACH KDX 1215 and HDM 1432 Workpiece width: 1,200 mm Workpiece height: 500 mm Drilling diameter: 8 - 40 mm Number of drilling spindles: 3 pcs Spindle speed: 150 - 1,100 RPM Ledpfo Aawa Nox Ah Sehn Tool changer: 15 pcs Saw blade diameter: 1,430 mm Cutting speed: 8 - 30 m/min Total power requirement: 43 kW Machine weight approx.: 20 t Space requirement approx.: m Additional information Working range Angle steel: 80 × 65 × 10 mm to 250 × 250 × 28 mm U-steel: 80 × 45 mm to 400 × 110 mm Double-T beams: 80 × 46 mm to 600 × 220 mm Wide flange beams: 100 × 100 mm to 1,008 × 302 mm Special wide flange beams / welded T-beams: up to 1,200 × 500 mm Workpiece data Workpiece width max.: 1,200 mm Workpiece height max.: 500 mm Drilling unit Number of drilling spindles: 3 (1 vertical, 2 horizontal) Drilling diameter: 8 - 40 mm Spindle speed: 150 - 1,100 RPM Drilling spindle feed: 0 - 500 mm/min Rapid traverse: 3,850 mm/min Rapid return: 8,000 mm/min Positioning speed: 15,000 mm/min Automatic tool changer: 15 tool positions (3 × 5) Clamping system Horizontal clamping force: 25,000 N Vertical clamping force: 4 × 10,000 N Sawing unit Saw blade diameter: 1,430 mm Saw blade type: HSS segmented saw blade Saw blade dimensions: 100 × 4 × 30 × 250 mm Cutting width: 9.5 mm Cutting speed: 8 - 30 m/min Saw feed: 0 - 400 mm/min Rapid return: 2,000 mm/min Drives Drilling drives: 3 × 11.0 kW Saw motor: 18.5 kW Positioning drives: 3 × 1.5 kW Hydraulic unit: 5.5 kW Hydraulic saw: 3.0 kW Vertical clamping cylinder: 1.5 kW Swiveling drive: 0.25 kW Hydraulic oil heater (option): 3.0 kW Total power Total connected power of the drilling unit: 43.0 kW Total installed power of the complete drilling and sawing unit: approx. 66 kW (incl. saw motor and auxiliary drives) Compressed air Compressed air connection: 6 - 8 bar Air consumption: 1,000 l/min Dimensions Drilling unit Dimensions (L × W × H): 6,650 × 1,300 × 3,730 mm Working height: 640 mm Weight: approx. 8,500 kg Saw Dimensions (L × W × H): 4,500 × 1,500 × 3,200 mm Working height: 640 mm Weight: approx. 10,980 kg Total weight approx. 19,500 kg (without accessories) Electrical data Operating voltage: 400 V / 50 Hz Control voltage: 24 V

Condition: like new (used), Year of construction: 2024, functionality: fully functional, In operation from 09/2024 to 03/2025. Infeed package lengths: 2.00m to 4.50m. Shortest length of finished packages: approx. 0.60m. Length accuracy: +/- 1mm. Lhsdpo Adryrjfx Ah Son Capacity: approx. 350 m3 per shift. Consisting of: Infeed roller conveyor, 4.5m long, 1.3m wide Mosca KOV-111-16 strapping machine with timber insert Buffer chain conveyor, 4.2m Variocut package capping system with 15kW saw motor Cart system, 4m long, with chain conveyors at the infeed and outfeed Extension of outfeed chain conveyor: 3.2m Control system

Condition: excellent (used), Catalog number 7834 Lsdpfxezxhhdj Ah Sjhn TECHNICAL DATA - max. diameter of the main blade without a scoring blade: 400mm - max. diameter of the blade with a scoring blade: 350mm - max. cutting height for a 350mm blade: 100mm - main blade adjustable up/down and at an angle - large blade guard - spindle diameter: 30mm - with a crosscut fence - cutting length on the fence: 1400mm - cutting width with guide: 1180mm - with a side fence - guide on the side fence adjustable at an angle - with a scoring blade - max. diameter of the scoring blade: 120mm - spindle diameter: 20mm - power of the main blade motor: 4kW - scoring blade motor: 0.75kW - 2 types of rotation speeds - table dimensions: 1120x1020mm - table dimensions with extension: 1820x1720mm - diameter of the dust extraction port: 130mm - dimensions (L/W/H): 3650x2150x1450mm - weight: 720kg ADVANTAGES – Polish production – with a scoring blade – DTR documentation – used saw, very good condition Net price: 11900 PLN Net price: 2767 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7751 TECHNICAL DATA - track width 250mm - working width of the roller 250mm - max. disc diameter 300mm - disc bore diameter 60mm - max. cutting height 100mm - table width with extension 520mm - table length 1580mm *from above: - pawls, 2 rows - sliding roller, metal, pressure roller - roller with saw blades - smooth sliding roller, metal, sliding roller *from below: Lhedpfjzr Izksx Ah Ssn - sliding roller - guide strip - pawls - track - central track lubrication - stepless feed speed adjustment - feed motor 0.75kW - main motor 15kW - diameter of dust extraction nozzle 200mm - overall dimensions L/W/H 1640x1400x1550mm - weight 1000kg ADVANTAGES – Italian made – very good condition – used multi-blade saw Net price: 32900 PLN Net price: 7651 EUR Net price calculated at an exchange rate of 4.30 PLN/EUR (price may change in the event of significant exchange rate fluctuations)