Used Universal Center for sale (15,584)

Condition: used, Technical details: vertical rapid adjustment: z-Achse: 1125 mm horizontal adjustment: x-Achse: 600 (+1000 elektrisch-manuell) mm cross adjustment: Frässupport y-Achse: 325 (340) mm control: Siemens 840D diameter of clamping surface: 3500/5800 mm turning diameter: max.6000 mm range of revolution per miute: Planscheibe: 1 - 12 U/min revolution per minute: Frässpindel: 1000-6000 U/min max. workpiece diameter on pallets: 6000 mm workpiece weight: 10 - 2000 kN tool taper: HSK-A-100 total power requirement: 120 kVA weight of the machine ca.: 35,0 t Annular Ring and Cylinder Machining Center Vertical special CNC machining center application: for turning-drilling and milling, grinding of annular parts (large gears, roller slewing rings, gear rims, special flanges, etc.) Njdpfx Aeu Idlfsgqjwp machine consists of two separate main groups: column unit and face plate/table unit - Feed drives via AC servomotors - cross adjustment milling support z-axis 325 (max.340) mm - Drive power of the faceplate drive 76 kW - Positioning of the table = 0,02mm What was renewed: - Axle motors were renewed (Siemens) - Central lubrication for large-diameter antifriction bearings of the turntable/spindle has been extended - partly the machine cabling - bladder accumulator and the safety valve i.D. *

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, AXILE G8 – High-Performance 5-Axis Machining Centre for Maximum Precision The AXILE G8 belongs to the top tier of modern 5-axis machining centres and is specifically engineered for demanding precision applications. Its integrated gantry design, high dynamic rigidity, and advanced automation options make it ideal for tool and mould making, aerospace, medical engineering, as well as complex single-part and small batch manufacturing. Technical highlights • 5-axis gantry construction for superior stability and minimal vibrations • High-dynamic linear drives / precision ball screws (depending on configuration) • Robust spindle (18,000–20,000 rpm, HSK-A63) with high power density • Swivel/rotary table with direct drive, perfect for simultaneous 5-axis machining • Large operating envelope for complex workpieces • Tool magazine capacity: 40–120 positions, depending on specification • Available with Siemens or Heidenhain control (depending on version), ergonomic and user-friendly • Rigid portal construction for optimal thermal stability and consistent precision Typical technical data (model dependent) • X-axis: approx. 670 mm • Y-axis: approx. 820 mm • Z-axis: approx. 600 mm • Table diameter: approx. 600 mm • Table load capacity: up to 500 kg • Spindle speed: 18,000 – 20,000 rpm • Tool holder: HSK-A63 • Magazine size: 40 / 60 / 120 tools • Control: Heidenhain TNC 640 or Siemens 840D sl (Values may vary according to year of manufacture and configuration.) Equipment & options • Full simultaneous 5-axis machining • Through-spindle coolant (IKZ) • Automatic tool measurement and breakage detection • Renishaw probing systems • High-pressure coolant system • Chip conveyor and internal enclosure rinsing • Modern safety enclosure & automation interfaces Application areas The AXILE G8 is ideal for: • Tool & mould making • Aerospace • Medical technology Nwjdsxxh A Ispfx Agqjp • Automotive prototyping • Mechanical engineering & precision component manufacturing Description This 5-axis machining centre stands out for its combination of dynamics, rigidity, and ultra-precise machining performance. Thanks to the gantry structure, the machine remains extremely stable even during long runtimes and high feed rates. Advanced thermal management ensures consistent accuracy, and the modern control system provides efficient programming and quick set-up times. The AXILE G8 is the perfect solution for companies seeking a reliable, powerful, and future-proof 5-axis machine. Currently, machines with Siemens and Heidenhain controls are in stock, also available with a 600mm table size.

Condition: used, Year of construction: 2012, x-travel 1.600 mm y-travel 900 mm z-travel 800 mm Control Heidenhein iTNC 530 table-size 1.700x850 mm taper ISO ISO 40 turning speeds 10.000 U/min workpiece Random 30 pos. table weight 2.000 Kg rapid traverse: 20 m/min Nwedpfsvtgr Isx Agqop Internal cooling system 20 bar total power requirement 18 kW weight of the machine ca. 18.600 kg -Maschinenstunden 47.256 h -Spindelstunden 9.362 h

Condition: used, Year of construction: 2019, Technical details: x-travel: 600 mm y-travel: 700 mm z-travel: 520 mm control: Sinumerik 840D sl MProfinet number of spindles: 3 Spindle RPM: 8000 1/min Spindle power: 40/49 kW Spindle Torque: 300/360 Nm Parts carrier / rotary tables (B-axes): 2 x 3 Table load per A-axis carrier: 1600 (x2) kg Width of A-Axis table: 1920 mm Max. dia. parts carrier (A-axis: 800 Interference dia. rotary tables: 560 mm workpiece - installed height: 400 mm Nwjdpfewywnlox Agqsp tool taper: HSK-A 100 tool change unit: 120 Pos. diameter of tools max.: 260 mm tool length - max.: 420 mm weight of tools max.: 20 kg total power requirement: 170 kVA weight of the machine ca.: 40 t dimensions of the machine ca.: 8,4 x 6,1 x 3,4 m Accerories Coolant gun Probe for tool breakage and length measuring Signal lamp 3 colors Automatic door High-end 3-spindle, 5-axis simultaneous horizontal machining center with CNC controlled pendulum swivel-rotary table (A/B-axis), 3 torque rotary tables inside machine while 3 rotary tables are waiting at the setup side. Coolant through spindle 0-70bar steppless Baluff tool coding, Tool breakage control, sister tool system chip conveyor, coolant gun, coolant shower, air gun, automatic door Remote diagnosis. 3 identical machines are available. *

Condition: repair required (used), Year of construction: 2002, operating hours: 54,981 h, functionality: not functional, machine/vehicle number: 1114 000273 3, travel distance X-axis: 1,080 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, controller manufacturer: Haidenhain, controller model: HEIDENHAIN TNC 530, total height: 2,500 mm, total length: 6,200 mm, total width: 3,802 mm, table width: 795 mm, table length: 1,500 mm, table load: 900 kg, overall weight: 9,500 kg, operating hours of spindle: 14,170 h, spindle nose: SK40, number of slots in tool magazine: 32, tool weight: 8,000 g, Equipment: chip conveyor, documentation/manual, Technical Details Machine: DMG DMU 100T Year of manufacture: 2002 Control: HEIDENHAIN TNC 530 Spindle taper: SK40 Operating hours: 54,981 h Travel paths: X-axis: 1,080 mm Nedpfx Agjxxamxeqowp Y-axis: 710 mm Z-axis: 710 mm Weight: approx. 9,500 kg Additional equipment: - NC rotary table (Nikken) - Large NC rotary table - Tailstock - Electronic handwheel Inspection Viewing under power is possible by prior appointment at any time. Condition: Used condition appropriate to age and previous usage. Known defects: - Ball screw of the X-axis worn / overhaul required - Y-axis likely cable or motor defect Repairs carried out: 2017 – Retrofit kit for handwheel 2022 – Replacement of screw conveyor in chip conveyor 2024 – New cylinder/linear guide for tool magazine 2024 – New monitor Further defects cannot be ruled out. Important note / disclaimer The machine is expressly sold as defective, without warranty, without guarantee, and with the exclusion of any liability for material defects. All technical details have been provided to the best of our knowledge, but are not binding. No responsibility is taken for completeness, accuracy, or timeliness of the information. The sale is made as seen and excluding any subsequent negotiation.

Condition: used, Year of construction: 2004, Technical details: x-travel: 600 mm y-travel: 700 mm Nwjdpfxsw Dud Sj Agqop z-travel: 60 mm tool taper: SK40 magazine place: 30 Stück table surface area: 630 mm 5axis-CNC-Milling Machine Make: DMG Type: DMU 60 P YOM: 2004 *

Condition: used, Year of construction: 2007, Technical details: x-travel: 1000 mm y-travel: 1000 mm Nedpfsu Idm Nex Agqowp z-travel: 500 mm B-axis (table): 360 ° spindle taper: HSK A63 working spindle range of revolution per minute : 15000 U/min rotary table: 260 mm control: Andronic 2060PKM feed: 1 - 5000 mm/min rapid traverse X,Y: 15 m/min. rapid traverse Z-axis: 12 m/min total power requirement: ca. 42 kW weight of the machine ca.: 6,0 t dimensions electric cabinet LxWxH: 2,4x0,6x2,2 m dimension machine xH: 3,5x2,4x3,2 m 5-axis BAZ in parallel kinematics suitable for prototypes. i.D. *

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: SX44T-1620237CFECH, travel distance X-axis: 1,525 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 20 m/min, controller manufacturer: HURCO, controller model: WINMAX, total height: 3,300 mm, total length: 4,500 mm, total width: 3,500 mm, table width: 660 mm, table length: 1,675 mm, table load: 1,360 kg, rotary table diameter: 600 mm, overall weight: 12,000 kg, spindle speed (max.): 12,000 rpm, distance table center to spindle nose: 622 mm, number of slots in tool magazine: 40, mount diameter: 40 mm, tool length: 250 mm, tool diameter: 75 mm, tool weight: 7,000 g, input voltage: 400 V, input frequency: 50 Hz, positioning accuracy: 0.01 mm, repeat accuracy: 0.005 mm, HURCO VMX 60 SRTI CNC Universal Machining Center - Rated current: 65 A - Power connection: 93 kW - C-axis travel: 360° - B-axis travel: ±90° - Number of T-slots: 6 - T-slot width: 18 mm - Slot spacing: 100 mm - Maximum uniform rotary table load: 500 kg - Rapid traverse B-axis: 50 rpm - Rapid traverse C-axis: 100 rpm - Tool diameter with full magazine: 75 mm - Max. total tool weight: 280 kg - B-axis positioning accuracy: ±7 arcsec Nwsdpfx Asxw T Hcegqsp - C-axis positioning accuracy: ±7 arcsec - B-axis repeatability: ±7 arcsec - C-axis repeatability: ±7 arcsec - Incl. mounted zero point clamping plate, plate dimensions: 400 x 400 mm The machine is equipped with a RENISHAW 3D probe and a chip conveyor. Note: The spindle inverter has been completely overhauled. TRANSPORT INFORMATION The machine can be transported on a truck with a width of 3000 mm. Important: The item must be collected by appointment between 19th and 23rd January 2026. FCA D-76571 Gaggenau – loaded onto truck.

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 2,000 mm, controller manufacturer: Heidenhain, controller model: 426-430, 5-axis area with X-axis travel: 1800 mm, Y-axis travel: 2000 mm, Z-axis travel: 2000 mm, and C-axis: 360 x 0.001 degrees. The spindle speed is 8000 rpm with an SK 50 tool holder. Tool changer with 60 positions, table size of 1700 x 1400 mm, and a maximum table load of 5000 kg. Nwjdpfxsxzil As Agqop

Condition: used, Year of construction: 2008, x-travel 500 mm y-travel 450 mm z-travel 400 mm Nwodpfx Aexluf Ajgqjp Control HEIDENHAIN iTNC 530 Table dimensions 500 x 380 mm table weight 500 Kg c-axis 0.001º ( ± 360º) 0 b-axis 180 ° rapid traverse X-axis 80 m/min feeds 50 m/min spindle turning speed range 18.000 U/min spindle taper BT- 40 spindle drive 30 kW Internal cooling system 40 bar handwheel HEIDENHAIN HR-410 Working hours 51.770 h Spindle hours 14.627 h total power requirement 50 kVA weight of the machine ca. 6,5 t

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground ball screws of the highest precision class. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. Such characteristics are important for ensuring balanced movement even in more complex tasks. The movement of the various axes is controlled by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters that can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different P Nedpfx Agevvi Nzjqowp

Condition: used, Year of construction: 1998, functionality: fully functional, DECKEL MAHO - DMU 50 T Offer Details Stock number: 1039-9277 Type of machine: Universal Machining Centre Manufacturer: DECKEL MAHO Model: DMU 50 T Year of manufacture: 1998 Control: TNC 426M Heidenhain Location: D-59302 Oelde, Germany Country of origin: Germany Delivery time: by arrangement Freight terms: ex site Additional information: CNC Universal Machining Centre DECKEL MAHO - DMU 50 T - 5 axes (3 + 2) - Swivel rotary table with angle display (axes B+C manual via handwheel) WE OFFER YOU: - Workshop-tested machines - Free loading onto truck - NO auction fees - Delivery possible (at extra cost) - Unloading and commissioning (at extra cost) Technical Details Travel (X-axis): 500 mm Travel (Y-axis): 400 mm Travel (Z-axis): 400 mm Control: TNC 426M Heidenhain Main spindle: - Speed range (main spindle): 20 – 9,000 rpm - Drive power (main spindle): 9 / 13 kW - Max. torque: 57 / 82 Nm - Tool interface: ISO 40 DIN 69871 Swivel rotary table: - Table size: 700 x 500 mm - Swivel angle (B): 105° (-10°/+95°) manual - Rotary axis (C): 360° manual - Max. table load: 200 kg - Number of T-slots: 7 - T-slot pitch: 63 mm - T-slot width: 14H7 mm - Center bore: 30H7 mm Tool changer: - Tool magazine positions: 16 - Tool holder: ISO 40 DIN 69871 - Max. tool length: 290 mm - Max. tool weight: 6.0 kg - Max. total tool load: 50 kg Feeds: - Feed rate: max. 10,000 mm/min - Rapid traverse: 12 m/min - Programming increment: 0.01 mm Total power consumption: 17 kW Machine weight approx.: 3.2 t Space requirement approx.: 4.0 x 4.0 x 2.5 m Equipment - Documentation - Chip tray - Coolant system - B-axis manual - C-axis manual - Swivel rotary table Nsdjxt Eyyspfx Agqswp - Tool changer (16 positions) - Electronic handwheel - Operating Mode 4

Condition: good (used), Year of construction: 2014, Ref. -No.: 10553 Manufacturer: HANDTMANN / BAVIUS Type: HBZ Trunnion 120 Year of construction: 2014 Type of control: CNC Control: Heidenhain TNC 640 Storage location: Halberstadt Country of origin: Germany Machine-No.: 200XXXXX X-Travel: 1270 mm Y-Travel: 1100 mm Z-Travel: 900 mm Table Height: Ø 1200 mm Table Load: 2000 kg Max. Tool Weight: 20 kg Max. Tool Length: 90 x 200 / 24 x 400 mm Max. Tool Diameter: Ø 130 mm Tool Taper: HSK 100 Numbers Of Tools In Magazin: 40 Tool Piece Magazine With: 140 Pcs./pcs. Spindle Turning Speed - Stepless: 14.000 RPM Max. Torque: 15000 Nm Rapid Traverse X-Axis: max. 60 m / min Rapid Travel Y-Axis: max. 60 m / min Rapid Traverse Z-Axis: max. 60 m / min Machine length: 7500 mm Nwjdpfx Asxvw Iusgqop Machine width: 5500 mm Machine Height: 3500 mm Weight Of The Machine Ca.: 26 t Rapid traverse C-axis: max. 25 RPM Rapid traverse A-axis: max. 20 RPM A-axis (swivel axis): - 30 / + 120 ° C-axis (rotary table axis): 360 ° Further information: - Horizontal machine, Y-axis arranged vertically - Machine stand designed as a welded construction - set up on height-adjustable precision wedge shoes, chip tray with cooling lubricant device, for external splash water cooling capacity: approx. 400 liters, with clean water pump, LP circuit, approx. 40 1/min at approx. 5 bar and rinsing nozzles on the Z-axis and/or the spindle - Complete safety housing - Stainless steel interior lining - Work area lighting - Manual loading door to the work area with polycarbonate safety window with glass front panel - Side viewing window to the work area with polycarbonate safety pane with glass front pane - Maintenance area freely accessible - HSK 100 hollow shank taper - Tool clamping via springs, tool release hydraulically - Tool clamping control - Cone cleaning - incl. spindle orientation

Condition: good (used), Year of construction: 2017, operating hours: 13,864 h, functionality: fully functional, machine/vehicle number: S844W-16201A7DFECH, travel distance X-axis: 2,134 mm, travel distance Y-axis: 865 mm, travel distance Z-axis: 762 mm, rapid traverse X-axis: 18 m/min, rapid traverse Y-axis: 18 m/min, controller manufacturer: HURCO, total height: 3,500 mm, total length: 6,000 mm, total width: 5,000 mm, table width: 865 mm, table length: 2,184 mm, table load: 2,268 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 4,381 h, number of slots in tool magazine: 40, mount diameter: 40 mm, tool length: 300 mm, tool weight: 7,000 g, input voltage: 400 V, positioning accuracy: 0.001 mm, repeat accuracy: 0.005 mm, Equipment: chip conveyor, HURCO VMX 84 Swi CNC Universal Machining Center - Operating voltage: 400 V - Frequency: 50 Hz - Connection: 50 kVA - Rated current: 72 A - Travel range A-axis: ±90° - Spindle nose to table dimensions: 147 - 909 mm - Positioning accuracy B: ±10 seconds - Repeatability B: 10 seconds - Feed rate X and Y axes: 15,200 mm/min - Feed rate Z axis: 13,500 mm/min - Rapid traverse X and Y axes: 18 m/min - Rapid traverse Z axis: 13.5 m/min - Rapid traverse B axis: 33.3 m/min - Max. tool diameter with adjacent pockets empty, tool cover removed: 75/120 mm - Tool change time: 2.5 sec - Chip-to-chip time: 21.6 sec The machine is equipped with a 3D probe, coolant system, and chip conveyor. Transport note: Note: The machine can be transported on a low-loader with a transport width of 3,000 mm. Attention: The item must be collected on a binding appointment to be scheduled between 19 and 23.01.2026. Nsdpsxw R Tmjfx Agqswp FCA D-76571 Gaggenau – loaded onto truck.

Condition: good (used), Year of construction: 2017, operating hours: 12,141 h, travel distance X-axis: 600 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 35 m/min, rapid traverse Y-axis: 35 m/min, rapid traverse Z-axis: 35 m/min, controller model: Heidenhain iTNC640, spindle speed (max.): 15,000 rpm, We offer in good condition Hermle C250U with following options: Heidenhain TS460 touchprobe Blum Laser Internal coolant 40 bar with paperbelt filter Air true Spindle Nwedexqd S Nepfx Agqsp

Condition: used, Year of construction: 2007, operating hours: 23,090 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 350 mm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 21 kVA, controller manufacturer: Siemens, controller model: 840D powerline, table width: 380 mm, table length: 500 mm, overall weight: 6,500 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 30, input voltage: 400 V, number of axes: 5, Equipment: chip conveyor, For sale is a machining center from manufacturer Deckel Maho, model DMU 50, in well-maintained and technically flawless condition. The machine has been serviced regularly and is in excellent condition both visually and mechanically. It is fully operational, tested, and ready for immediate use. Additional equipment: - Paper band filter - Coolant system With our all-inclusive package, we personally handle the complete service for you upon request – from delivery to the commissioning of your new machine. This includes unloading, placement, and alignment of the machining center. Afterwards, our experienced service technicians carry out professional commissioning, perform all necessary function tests, and ensure your machine operates reliably and precisely. Furthermore, we offer tailored training sessions for your employees so that you can maximize the potential of your machine from day one. Even after installation, we remain at your service—be it for maintenance, technical questions, or future upgrades. With our all-inclusive package you have nothing to worry about – we ensure everything runs smoothly so you can focus entirely on your production. Optionally, you can also purchase extraction systems, attachments, and accessories from us – including high-quality Donaldson extraction units – to make your production even more efficient and clean. Our service promise: Quality, expertise, and customer satisfaction are our top priorities. Our team consists of qualified and experienced technicians, specializing in Mazak machines as well as other brands. We place great value on personal support and continue to assist you even after the purchase. You are also welcome to inspect and test the machine under power at our facility at any time. We cordially invite you to visit us and see the condition and functionality of the machine for yourself. With us, you are in the best hands – professional, reliable, and passionate about machinery! PS CNC Service Germany GmbH & Co. KG Nsdpfx Agexwtp Rjqswp All information without guarantee.

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground, high-precision recirculating ball screws. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. This characteristic is important for ensuring balanced movement even in more complex tasks. The various axes are driven by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters, which can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different Nsdpfxevvi Rfj Agqjwp

Condition: used, Year of construction: 2003, functionality: fully functional, REIDEN - BFR 22 Offer Details Stock number: 1039-9086 Machine type: Universal Machining Centre Manufacturer: REIDEN Model: BFR 22 Year of manufacture: 2003 Control: TNC 430 Heidenhain Location: North Rhine-Westphalia Country of origin: Switzerland Delivery time: by arrangement Freight terms: ex site Additional Information 4-axis universal machining centre REIDEN - BFR 22 WE OFFER YOU: • Workshop-inspected machines • Free loading onto truck Njdpfjxtpbujx Agqjwp • NO auction fee • Delivery possible (at extra cost) • Unloading and commissioning (at extra cost) Technical Details X travel: 2,000 mm Y travel: 1,000 mm Z travel: 1,200 mm Control: TNC 430 Heidenhain Main spindle: Speed range – main spindle: 20 – 5,000 rpm Gear stages: 2 Drive power – main spindle: 30 (100%) / 45 (40%) kW Torque: 1,050 / 1,580 Nm Tool holder: HSK 100 Swiveling: B: +/- 180° B-axis increment: 0.001° Worktable: Table clamping surface: 1,000 x 2,000 mm Max. table load: 4,000 kg T-slot spacing: 100 mm T-slots: 18 H7 Number of T-slots: 10 Tool magazine: Number of tool positions: 40 Tool holder: HSK 100 Tool change time: 10 sec Max. tool diameter: 250 mm Max. tool length: 400 mm Max. tool weight: 20 kg Feeds: Feed rate X, Y, Z: 0 – 20,000 mm/min Feed rate B: 10 1/min Power X, Z: 15.7 / Y: 8.5 kW Power B: 2.5 kW Feed force: 22,500 N Total power requirement: kW Machine weight approx.: 23 t Space required approx.: 8.0 x 8.0 x 3.3 m Accessories • Chip conveyor • Coolant system • High-pressure coolant • Internal coolant supply • Oil mist extraction • Paper band filter • B-axis 0.001° • Spindle oil cooler • Probing system: Blum TC 60 • Electronic handwheel • Automatic door • Vice: 4x • Clamping table: 2x (50 x 50 x 37 cm)

Condition: used, Year of construction: 2008, x-travel 450 mm y-travel 400 mm z-travel 480 mm control MillPlus IT V600 Heidenhain turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 10 / 15 kW max. Torque 130 Nm tool taper SK 40 swivellable B: -95 / +30 ° table surface area Ø 450 mm T-slots 7x 14 x 63 mm max. table load 250 kg rotatable C: 360 ° max. workpiecediameter 380 mm max. workpiece height 670 mm number of toolpositions 16 pos. tool taper SK 40 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 250 mm max. tool weight 8,0 kg feed speeds max. 30.000 mm/min rapid traverse 30 m/min Feed force ( X / Y / Z ) 7 / 13 / 10 kN total power requirement 27,6 kVA weight of the machine ca. 5,2 t dimensions of the machine ca. 3,1 x 3,0 x 3,0 m 5 Axis CNC - MachiningCenter Universal DECKEL MAHO - DMU 40 monoBLOCK - 5-axis simultaneous - only ca. 589h Spindle-hrs.! Operating-Hours: ca. 1.700h Nwedpfeu Dbpmox Agqsp - from training center

Condition: not inspected (used), Year of construction: 2001, operating hours: 3,260 h, functionality: unexamined, machine/vehicle number: 730, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 685 mm, workpiece weight (max.): 1,500 kg, spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! By placing a bid, you are committing to collecting the item within the specified period: between 01.12.2025 and 05.12.2025. TECHNICAL DETAILS Travel distances X-axis travel: 1,350 mm Y-axis travel: 1,150 mm Z-axis travel (vertical): 685 mm Z-axis travel (horizontal): 870 mm Spindle Main spindle speed: 0 – 12,000 rpm Acceleration time: approx. 2.5 s Tool holder: HSK-A63 Tool Data Tool magazine: 46-position changer Number of magazine stations: 46 Max. tool diameter (full magazine): 80 mm Max. tool diameter (partial magazine): 130 mm Max. tool weight: 8 kg Max. tool length: 300 mm Max. magazine load: 200 kg Chip-to-chip time: 9–12 sec H/H Feeds and Rapid Traverses Rapid traverse X, Y, Z: 30 m/min Table NC rotary table diameter: 1,100 mm Clamping surface: Ø 1,100 x 1,000 mm Table load: 1,500 kg Centering bore: Ø 50H6 Table height above floor: approx. 1,120 mm Swivel axis (A-axis): +15° to -120° Control: HEIDENHAIN TNC 426 MACHINE DETAILS Spindle hours: 3,260 h Machine operating hours: 82,797 h Dimensions & Weight Machine weight: approx. 12,000 kg Space requirement (L x W x H): 4,130 x 3,680 x 3,150 mm EQUIPMENT RENISHAW OMP60 probe system Technical documentation Note: Transport is expected to be carried out by a truck with a loading width of 3,000 mm. Nodpexxzqrjfx Agqowp

Condition: used, Year of construction: 2003, x-travel 800 mm y-travel 700 mm z-travel 600 mm turning speeds 12000 1 U/min control Heidenhain total power requirement 59 kW weight of the machine ca. 10,6 t Nodpfx Aerc Ip Iegqjwp

Condition: used, Year of construction: 2022, operating hours: 5,403 h, functionality: fully functional, machine/vehicle number: 315D210043, travel distance X-axis: 712 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 515 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, nominal power (apparent): 25 kVA, torque: 108 Nm, controller manufacturer: Siemens, controller model: S828D, total height: 3,350 mm, total length: 2,720 mm, total width: 3,900 mm, table load: 200 kg, rotary table diameter: 410 mm, overall weight: 8,730 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 1,182 h, coolant supply: 3 bar, number of slots in tool magazine: 48, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, QUASER UX 500 C Siemens S828D Nedpfx Ajxwp E Uegqewp 315D210043 including 10.4" screen with movable operator panel, tiltable and rotatable Software option: 3D simulation Software option: network drive management Main spindle SK40, suitable for standard holders and holders with face contact according to DIN 69871 Tool pull studs according to DIN 69872 (not included) Main spindle speed 12,000 rpm, 13.3 kW/85 Nm (S6-25%), direct-coupled, SC-4.2 Includes temperature-controlled cooling system Portable electronic handwheel Heat exchanger for electrical cabinet Double-arm tool changer with 30 magazine positions Pneumatically operated tool changer door Direct position measuring system on rotary axis Direct position measuring system on swivel axis Infrared receiver for workpiece and tool measurement Machine color: RAL 7035 Light Grey Coolant tank, spindle head, and doors: RAL 9005 Jet Black Three-color signal tower Coolant spray gun External air blast for dry machining Automatic central lubrication for ball screws Computer-optimized heavy machine base made of heavily ribbed cast iron Stable and rigid machine construction due to portal design Chip removal system, consisting of work area chip flushing with Grundfos pump 75 l/min at 3 bar, chip trays made of stainless steel, and 2 screw conveyors in the work area Full work area enclosure with 2 corner sliding doors and 2 work area lights Flood coolant system with 4 ring nozzles positioned at the spindle nose, supplied by Grundfos pump, 75 l/min at 3 bar Year of manufacture: 2022

Condition: used, Year of construction: 1998, functionality: fully functional, DECKEL MAHO - DMU 125 T Offer Details Stock number: 1039-8700 Machine type: Vertical Machining Centre Manufacturer: DECKEL MAHO Model: DMU 125 T Year of manufacture: 1998 Control: Heidenhain TNC 426 Location: D-59302 Oelde, Germany Country of origin: Germany Delivery time: by arrangement Freight terms: ex-site Additional information: CNC Vertical Machining Centre DECKEL MAHO - DMU 125 T - ICS (internal coolant supply) WE OFFER YOU: • Workshop-inspected machines • Free loaded onto truck • NO auction fees • Delivery possible (at extra cost) • Unloading and commissioning (at extra cost) Technical Details Travel paths: X-axis travel: 1,250 mm y-axis travel: 880 mm z-axis travel: 800 mm Control: Heidenhain TNC 426 Main spindle: • Spindle speed range: max. 12,000 rpm • Main spindle drive power: 15 / 10 kW • Max. torque: 500 Nm • Tool holder: SK 40 Worktable: • Clamping surface: 1,500 x 1,050 mm • Max. table load: 2,500 kg • Number of T-slots: 10 • T-slot width: 18 H7 mm • T-slot spacing: 100 mm Nwjdpfxjxtmpij Agqjp Tool changer: • Number of tool pockets: 30 positions • Max. tool diameter: 80 mm • Max. tool diameter with adjacent pockets empty: 160 mm • Max. tool length: 315 mm • Max. tool weight: 8 kg • Max. total tool weight: 100 kg Feed rates: • Rapid traverse (X / Y / Z): 15 m/min • Feed rate: 10,000 mm/min Total power consumption: 29 kW Machine weight approx.: 16.0 t Space requirements approx.: 7.0 x 5.0 x 3.3 m Accessories • Documentation • Chip conveyor • Coolant system • High-pressure cooling • Internal coolant supply • Tool changer • Touch probe (Heidenhain) • Electronic handwheel

Condition: used, Year of construction: 2005, x-travel 880 mm y-travel 630 mm z-travel 630 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 28 / 19 kW max. Torque 121 / 82 Nm tool taper HSK-A 63 swivellable B: +30° / -120 ° table surface area Ø 700 / 1.250 x 700 mm Nwsdpfx Agsvn Ur Eoqjp max. table load 650 kg rotatable C: 360 ° max. workpiecediameter 850 mm max. workpiece height 550 mm number of toolpositions 32 pos. tool taper HSK-A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool weight 8,0 kg change-time chip to chip 10 sec feed speeds max. 30.000 mm/min rapid traverse 30 m/min Accelaration 5 m/s² total power requirement 48 kVA weight of the machine ca. 14,0 t dimensions of the machine ca. 6,5 x 5,0 x 2,9 m 5 Axis CNC - MachiningCenter Universal DECKEL MAHO - DMU 80 monoBLOCK - NC-Rotary Table (C-Achse) integrated in rigid-table - Swivel-Milling-Head (B-Axis) - only 6.100h Spindle Hours

Condition: used, Year of construction: 2013, x-travel 450 mm y-travel 600 mm z-travel 330 mm control iTNC 530 HSCI Heidenhain turning speeds max. 18.000 min/-1 power capacity - main spindel 31 / 17 kW max. Torque 98 / 54 Nm tool taper HSK A63 rotary table dia. 320 mm Swivel range A: +/- 135 ° rotatable C: 360 ° max. table load 300 kg Number of revolutions A: 25 / C: 40 rpm T-slots 4x 14H7 number of toolpositions 55 pos. tool taper HSK A63 max. tool diameter 80 mm Nsdet Syf Ujpfx Agqswp max. tool-dia with free toolbox 125 mm max. tool length 250 mm max. tool weight 8,0 kg max. total weight 220 kg change-time chip to chip 4,5 sec Accelaration 8 m/sec² Feed force 4,5 kN rapid traverse ( X / Y / Z ) 30 m/min total power requirement 40 kVA weight of the machine ca. 9,0 t dimensions of the machine ca. 6,5 x 6,5 x 3,5 m 5 Axis - CNC Machining Center Universal HERMLE - C 22 U - Good condition! - Linear axes XYZ and drives renewed - new spindle Q1/2024 - Optional: Internal coolant supply retrofitting possible (by Hermle, for an additional charge) - Additional container with paper belt filter incl. level monitoring - Conversion of coolant lubricant tank (lifting pump incl. level monitoring)