Used Centering Device for sale (23,553)

Condition: used, Year of construction: 2006, number of axes: 3, working width: 1,250 mm, working length: 3,100 mm, TECHNICAL DETAILS Working area, X-axis: 3,100 mm Working area, Y-axis: 1,250 mm Max. panel thickness: 85 mm Number of controlled axes: 3 Drilling unit Number of drilling units: 1 Position of drilling unit: top Vertical drilling spindles: 7 Horizontal drilling spindles, X-direction: 2 Horizontal drilling spindles, Y-direction: 2 Total number of vertical and horizontal drilling spindles: 11 Milling unit Number of milling spindles: 1 Position of milling spindle: top Controlled axes: 3 Motor power: 9 kW Automatic tool changer: yes Grooving unit Number of grooving units: 1 Position of grooving unit: top Swivel positions: 0° / 90° Bodpfx Aez En Afjl Asdh Number of tool magazines: 1 Tool positions: 8 Position of tool magazine: machine side Number of work tables: 1 Table width: 3,100 mm Table length: 1,250 mm Table material: phenolic resin MACHINE DETAILS Number of vacuum pumps: 1 Suction capacity per pump: 250 m³/h Control system: PC Control Programming software: WoodWOP 5.0 EQUIPMENT Flat table design Nesting work table Vacuum pump Automatic tool changer Tool magazine positioned on the side Safety light barriers CE marking The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6279

Condition: used, Year of construction: 2006, number of axes: 3, working width: 2,040 mm, working length: 3,680 mm, TECHNICAL DETAILS MACHINING PROCESS Machining process: Drilling and milling WORKING AREA X-axis working area: 3,680 mm Y-axis working area: 2,040 mm Number of working areas: 2 Number of controlled axes: 3 WORKTABLE Table type: Flat table / Nesting table Number of tables: 1 Table width: 3,680 mm Table length: 2,040 mm Table material: Aluminum DRILLING UNIT Number of drilling units: 1 Position of drilling unit: top Vertical drilling spindles: 7 Horizontal drilling spindles, X-axis: 2 Horizontal drilling spindles, Y-axis: 2 Total number of drilling spindles: 11 MILLING SPINDLE Number of milling spindles: 1 Position of milling spindle: top Controlled axes: 3 Motor power: 13 kW Speed: 24,000 rpm Automatic tool changer: yes TOOL MAGAZINE Number of tool magazines: 1 Tool slots: 12 Tool magazine: positioned at the head Bdsdpfx Aljz Enz Uj Aeh VACUUM SYSTEM Number of vacuum pumps: 1 Suction capacity: 250 m³/h CONTROL AND SOFTWARE Control: PC-based control Programming software: Xylog Plus MACHINE DETAILS MAIN DRIVE Power of main electric spindle: 13 kW SAFETY CE marking: yes Protective guard: permanently mounted on the machine Safety system: front safety mats EQUIPMENT Aluminum nesting table Suction cups for workpiece clamping Vacuum pump Drilling unit with 11 drilling spindles Milling spindle with automatic tool changer Tool magazine with 12 tool slots PC-based control Programming software Xylog Plus Protective guard permanently mounted on the machine Front safety mats

Condition: new, Year of construction: 2024, functionality: fully functional, - Weight approx. 11,8 Kg - CNC manufactured from A 600, anodized surface - Working range up to 506 mm diameter - No additional material movements, thus crane capacities, man hours and energy are saved if machines are used for this purpose, you have to crane to the machine and then also back again to the commissioning area - the time loss for 2 centering holes alone is immense. - Ready for use in seconds - Stepless clamping, 3 diameter ranges - Produce a centering hole in seconds (directly after sawing at the machine) - All components are made in Germany - Centering Din 333 form A, 60°, 5, 6,3 and 8 mm. Other wishes are also possible. Bdodpfx Aljpz Ib Es Ash

Condition: excellent (used), Feeder with centering device for multi-blade saw. Bedpfez Afkksx Al Ajdh Power supply: 380/400V Pneumatic Automatic

Condition: used, Components of a sawing system Manufacturer: Linck Type: VZM & CSMA consisting of: CSMA extraction device Manufacturer: Linck Type: Av / CSMA Year of manufacture: 2018 The CSMA extraction device offers powerful and flexible material handling in automated production lines. It is designed for variable workpiece sizes and ensures continuous material transport. Technical data - Drive power: 4 x 4 kW - Feed rate: 85 m/min VZM centering device Manufacturer: Linck Type: VZM The VZM centering device is designed for precise centering tasks at high feed rates. The robust design allows it to be used under demanding industrial conditions. Technical data - Drive power: 2 x 7.5 kW - Feed rate: 84 m/min Note: Bdsdpozuz I Nofx Al Ash The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2018, 2018 Fanuc Robodrill D21MIB5 Twin Robot Machining Cell with (2) Fanuc Series 31I-Model B5 CNC Controls Cell Comprising: Twin Fanuc Robodrill Type A04B-0104-B181 Vertical Milling & Drilling Machining Centres (S/Nos. P186ZG729 & P186ZG731). Table Size Approx 650mm x 400mm. Travel: 'X' Approx 500mm, 'Y' Approx 400mm, 'Z' Approx 330mm. Max Table Load 300kg. Number of Tool Pockets 21. Max Tool Length 250mm, Max Tool Weight 3kg. BT30 Spindle Taper. Max Spindle Speeds 10,000 RPM. Nikken TAT-170N (2018) Pneumatically Operated Rotary Support Table with 4th Axis Fanuc DDRiB-104-B181STD. ABB Flexloader SC3000XL Extended Conveyor Loading System (S/No. M180057-1) with Fanuc ABB 6 Axis Robot IRB 4600 & Fanuc ABB 6 Axis Feeder Robot IRB 1200 with Schunk Grab. Feed In/Feed Out Belt Conveyors. ABB Flexloader Vision. FSE E7326 Filtration, 950 Litre Capacity Coolant & Swarf Management System. Andreas Maier AMF 6906/61919 Hydraulic Equipment. Bodpfez E Sbrex Al Aedh This Cell Includes: Euro 250 Bowl Feeder on Stand with CVIC Digital Control. Desoutter ECS16-M20 Current Controlled Screwdriver. Robot Pendant ABB DSQC 679. Signal Tower Lights. Transformers. Weight of each Machining Centre Approx 2,400kg. Floor Space Required for Full Cell Approx 8,000mm x 6,500mm. 3 Phase Power Supply, 415 Volt. Fixtures Not Included. Swarf Bins Not Included. Viewing Recommended.

Condition: used, Centering device, centering unit for bending machine, straightening machine, sheet metal straightening machine, strip straightening machine, strip straightening device, sheet metal straightening system, for eccentric press, hydraulic press -Manufacturer: Schied: centering device Bdjdpfx Ajhx E Unel Aoh -Hole distance: 300/90 mm O 13 mm -Dimensions: see photos -Total dimensions: 460/160/H160 mm -Weight: 17.5kg

Condition: used, Year of construction: 2008, 2008 DMG Sauer Lasertec 80 Fine Cutting Laser Processing Cell with Fanuc Robot M16IB 20 Handling System & DMG Siemens 840D Powerline CNC Control Bjdpfez E Sabox Al Asdh Cell Comprising Load/Unload Palletised Loading Robot. Chiller, Dust Extractor, Filtration & Rofin Cutting Laser System. Details: Sauer Lasertec 80 Laser Cutting Machine. Axis Travel: 'X' Travel Approx 800mm, 'Y' Travel Approx 500mm, 'Z' Travel Approx 700mm. Maximum Working Width Approx 500mm, Max Cutting length Approx 800mm. Fanuc 6-Axis Modular Robot M-16IB 20, 20kg Pay Load with Stand Alone R-30IA Control. Robot Arm Reach Approx 1,600mm. Rofin DC 015 Cutting Laser System with Stand Alone Control 4763 4763 (2008). KKT Kraus Stand Alone Chiller System KLC19 N-L (2011). Rittal Top Therm SK 3304100 Cooling Unit. Keller Dust Extraction Stand Alone Unit with Aktor-Sensor Bus-System Digital Control. Floor Space Required for Full Cell Approx 7,300mm x 5,000mm. Weight of Laser Processing Machine Approx 5,700kg. 3 Phase Power Supply, 415 Volt.Viewing Recommended.

Condition: not inspected (used), Year of construction: 1989, • Max width of saws 400mm • Max cutting height 140mm • 132kW engine • Centerer Bedjif Ah Hjpfx Al Asdh

Condition: excellent (used), Year of construction: 2019, 2019 Starrag NB251 CNC Blisk Horizontal 5 Axis Simultaneous Machining Centre With Siemens 840D Control Bdjdpez Dg Taefx Al Ajh Maximum Blisk Ø750mm. Axis Travel 'X'=700mm, 'Y'=400mm, 'Z'=400mm, 'A'=360° (Endless), 'B'=± 87°. Rapid Traverse 'X'=62m/min, 'Y'=62m/min, 'Z'=62m/min, 'A'=200rpm, 'B'=60rpm. Maximum Spindle Speed 18,000rpm (28kW Motor), Torque at 100% Duty 181Nm. Spindle Taper HSK-A63. 62 Position ATC. Maximum Tool Ø150mm, Maximum Tool Length 250mm, Maximum Tool Weight 6.5kg. Tool Change Time Double Gripper 8sec. S/No. 8404 (2019). With Knoll Through Coolant Paper Filtration System, Knoll 450-K1 Chip Conveyor, Blum Laser Tool Setter, Renishaw Spindle Probes, Starrag Chiller Unit, Wash Gun, Swarf Bin, Handwheel & Manuals. Overall Dimensions L5,000 x W3,260 x H3,200mm. Weight 12,000kg.

Condition: used, Year of construction: 2021, machine/vehicle number: B740, functionality: fully functional, operating hours: 3,500 h, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 8,005 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 274 mm, workpiece length (max.): 8,005 mm, workpiece width (max.): 2,000 mm, workpiece height (max.): 274 mm, number of axes: 3, number of slots in tool magazine: 1, controller manufacturer: CMS, total height: 4,300 mm, total length: 10,500 mm, total width: 4,860 mm, overall weight: 2,200 kg, table length: 9,736 mm, table width: 2,080 mm, high-pressure hose length: 11 mm, water pressure: 4,130 bar, Equipment: CE marking, documentation/manual, We offer this used CMS Tecnocut Smartline machining center, year of construction 2021. Manufacturer: CMS Model: Tecnocut Smartline Year of manufacture: 2021 Condition: used Category ID: 2075 Bedpoz E Rmyefx Al Asdh Type ID: 970 Type: machining center CMS Tecnocut Smartline CNC Waterjet Machine. See attached document for accurate dimensions. 8m x 2m steel honeycomb bed, up to 413MPa water pressure. Includes machine (with water tank), HMI & stand, reverse osmosis unit, pre-pressure intensifier (6 bar), CMS JetPower Evo Intensifier (4130 Bar), Clean water storage tank, Filter System for recycling water, Hydrogen Peroxide Dosing System, light guards, spare HP tube & orifice inserts. Manuals and machine drawings available upon request. Video showing machine running available on request. If you have any questions or need more information, feel free to send us a message or give us a call. As shown in the photographs, the catch tank shows wear from use, including localised corrosion and small rust-through areas on a few internal support beams; the machine remains operational and inspection is welcome.

Condition: used, Year of construction: 2017, functionality: fully functional, X-axis (planar travel): 195 mm (approx. 7.67 inches) Z-axis (longitudinal travel): 400–430 mm Tailstock travel / quill travel: 100 mm (quill stroke) Bdjdpfx Aoz Hwaiel Aoh Rapid traverse X-axis: 30 m/min Rapid traverse Z-axis: 30 m/min C-axis (spindle indexing): 0.001° (for driven tools / MC version) Center height: 1,000 mm Max. spindle speed: 3,500 rpm Max. chuck diameter: 10 inches Max. chuck speed: 4,200 rpm Max. working area (diameter x length): Ø 325 mm x 302 mm Machine weight: 4,350 kg Operating voltage: 3 PE / 220 V (AC) Rated frequency: 50 Hz Electrical connections / power: 30 kVA Rated current: 100 A Short-circuit current strength: 5 kA Largest motor: 80 A Circuit breaker capacity: 100 A Switching capacity of protective device: 50 kA Compressed air supply: 0.5 MPa (5 bar)

Condition: used, Year of construction: 2011, Control HEIDENHAIN iTNC 530 x-travel 600 mm y-travel 770 mm z-travel 800 mm spindle tunring speed 30.000 U/min Condition: Used The offer includes two GROB G350 machining centers from the years 2011 and 2013. Technical features & accessories: - Disc-type tool magazine with 40 tool positions - Auxiliary tool magazine TM171 with 171 tool positions - SCHULER LMC600 pallet storage system (3/4 module) - 27 pallet storage positions, 3-level Bedez Hz Nnjpfx Al Ajdh - 1 rotary setup station - SCHULER Pilot control system - 2 KNOLL 500K-1/10 chip conveyors Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale!

Condition: good (used), Year of construction: 2003, functionality: fully functional, HAAS VF 2 VERTICTAL MACHINING CENTRE TABLE 914 X 356 MM TRAVERSES - 762 X 406 X 508 MM MAX CUTTING RATE 16.5 M/MIN SPINDLE MOTOR 20 HP 20 ATC 40 TAPER SPINDLE SWARF CONVEYOR STANDARD COOLANT OVERALL DIMESIONS - 2790 X 2350 X 2650 MM Bsdoz Ehxyepfx Al Ajdh WEIGHT 3.5 TON ORIGINAL PAINTWORK , VERY VERY GOOD FOR ITS AGE .

Condition: excellent (used), Year of construction: 2018, Manufacturer: TEKNA Model: TKE 984-6 Design: RFT Bdedpfxjz Er Hhe Al Ash Year of manufacture: 2018 Machine type: CNC machining center with moving gantry Axes: 4 Suitable for: Drilling, milling, threading, and machining of aluminum, PVC, light metal, and steel profiles X-axis travel: 6,700 mm Y-axis travel: 1,350 mm Z-axis travel: 610 mm Swivel range of machining head: -90° to +90° Positioning resolution of swivel axis: 0.01° Electro spindle: 9 kW Max. spindle speed: 24,000 rpm Max. torque: 14.3 Nm Tool interface: HSK 63F Spindle cooling: Water cooling with chiller Clamping devices: 6 clamps Automatic positioning of the clamps via the X-axis Tool magazines: 3 fixed magazines Tool positions: 14 per magazine / total 42 tool positions Chip conveyor: Rubber belt chip conveyor, design 6,700 mm Measuring system: 3D measuring system for multiple scanning Additional tank for lubrication system: 15 liters Integrated cabin Separate electrical control cabinet Glass scale on the X-axis Customer-specific clamping device system for profiles X-axis with 2 motors in master/slave configuration Laser length measuring tool instead of the standard version 2 feed pipes for lubrication Multi-part machining Double-mode operation / machining in two work areas Parallel machining of two profiles possible Drilling capacity aluminum AL99: max. Ø 20 mm Drilling capacity steel FE370 D FF: max. Ø 14 mm Straight milling aluminum AL99: max. 15 mm material thickness Straight milling steel FE370 D FF: max. 5 mm material thickness Thread cutting aluminum: up to M12 Thread cutting steel: up to M8

Condition: excellent (used), Year of construction: 2021, Table size 3500 x 820 mm, table load 2500 kgs, traverses XYZ 3000 x 800 x 720mm, Rapid federate 50m/min, Spindle power 35Kw, spindle speed 18,000rpm, 30 station ATC, Bdjdpoz Ha H Sofx Al Ash Spindle taper CT40, Mazak Smooth Control, B axis +/- 110 degrees, C axis 0.001 degrees, Through spindle coolant, swarf conveyor.

Condition: excellent (used), Year of construction: 2020, operating hours: 4,000 h, functionality: fully functional, CNC turning center Doosan Puma 700 XLY II Turning length: 5,050 mm Turning diameter: 700 mm with driven tools and Y-axis Basic equipment: - CNC control Fanuc 0i with Manual Guide i - 45" inclined bed in tubular construction - Main spindle with 4 bearings. Spindle bearing accuracy class P 4 - Lifetime lubrication - Internal clamping device hydraulically actuated with internal clamping cylinder complete with safety device, coolant collection tray, stroke control and draw rod - Automatic central lubrication - Tailstock programmable - Flat bed guides hardened and counter surface coated with Rulon 142 - Coolant system with 7 bar delivery pressure - Guide rail cover Z-axis - Full enclosure - Watertight work area lighting - Integrated alignment screws and mounting plates Including Doosan options: - Tailstock programmable (towed by the turret) - Oil skimmer - Coolant system with 14 bar delivery pressure - Electronic tool breakage monitoring - Automatic tool measuring arm - 3-color warning light - Clamping force monitoring - Additional handwheel - NC option Arbitrary Speed Threading - 2x Drilling & Milling head BMT 85 CC PRECI-FLEX; straight ER50 Bodpfxjzlcyus Al Aodh - 2x Drilling & Milling head BMT 85 CC PRECI-FLEX; angled ER50 - Preparation for programmable hydraulic steady rest (includes complete basic body, connected to open/close the steady rest via M-function and the basic body can be automatically positioned in the Z-direction, towed by the cross slide without the steady rest) Schunk ROTA NC 630-180 2520-Sv90" Chuck diameter 630 mm Manufacturer Schunk with involute gearing 90" incl. flange and draw rod adapter Steady rest RX6-ZSW-100520 50-SCUW-95 self-centering, hydraulic steady rest, sealed housing (proofline), measuring system for clamping range monitoring (SCU-V), integrated flushing channels / chip protection, flushing nozzles, extra compact design, integrated cylinder with pressure converter. Clamping range from 100mm to 520mm Brinkmann pressure boosting pump 30 bar incl. 50p Mahle filter approx. 30 bar, can be switched on via M-function incl. cartridge filter Coolant gun with its own pump Coolant gun for cleaning the work area when the door is open In automatic operation without function Hinged belt chip conveyor, discharge on the right, inclination angle 50 degrees, discharge height 1150 mm Chip cart Type SKM750; 0.75m3 volume; 1000kg load capacity; with rollers and forklift pockets

Condition: excellent (used), Year of construction: 2020, MACHINING CENTER GANNOMAT "PROTEC 0571" working width 1300 mm Drilling, grooving, milling Base machine complete in standard version according to price list 01/19/D: For detailed technical data, please refer to the datasheet for PROTEC Type 0571 - Machining unit with: PowerBlock with 21 spindles and 1 slotting saw (BK 1341) Bdsdsw Sguwjpfx Al Ajh - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y 4th drilling axis in Y - Milling unit Profit F3 HSK63F with 3-position magazine for automatic tool change, 5.5 kW motor (S1), 1,000–20,000 rpm with frequency converter, clockwise and counterclockwise rotation, tool holder HSK63F with collet 462E, cutter length up to 130 mm. - INCLUDES OPTION: Additional safety device with lamella curtain for processing Lamello P-System. Required for horizontal milling for Lamello P-System with groove cutter Ø 100.4 x 7 x 30 mm. - Workpiece sizes and weights: - Workpiece width (X): min. 60 mm / max. 1300 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 263 mm in through-feed mode, max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg. - Air connection: 7 bar Machine No. 435.046 Electrical connection: (400V, 3Ph, 50Hz, (12kVA, 17.5A)) - Pressure device from above for working width 1300 mm - 765 mm roller table (Y-axis), foldable, for machine front, W 500 mm - 765 mm roller table (Y-axis), foldable, for machine rear, W 500 mm - Auxiliary stop 600 mm with integrated rollers for roller tables - Extraction distributor Ø 160 mm / Ø 80-80-80 mm, spacing 196 mm - Documentation in German: Operating manual: GERMAN Programming manual: GERMAN Operator software: GERMAN Operating system: ENGLISH Keyboard: GERMAN Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2020, Traverses X Y Z: 762 x 508 x 610mm, Table 1020 x 510mm, Spindle speed 40 – 12000 rpm, Bedpfx Asz Ha Ayol Aedh Hurco Winmax 5 Control, Spindle taper DIN40, 30 ATC, Coolant, Low volt light, Swarf Conveyor

Condition: used, turning diameter over bed 370 mm turning diameter over slide rest 200 mm turning length 1000 mm centre height 185 mm spindle bore 56 mm tailstock quill taper MT 4 turning speeds 50 - 2000 U/min power capacity 4,0 kW weight of the machine ca. 1,4 t dimensions of the machine ca. 2,3 x 1,1 x 1,3 m Bdedpoxfwckofx Al Aeh Center lathe 200mm three-jaw chuck Size B Multifix tool post 3 Multifix tool holders Emergency stop device

Condition: good (used), Year of construction: 2010, Ref. -No.: 10287 Manufacturer: DMG Type: DMC 210 FD Year of construction: 2010 Type of control: CNC-Steuerung Control: Heidenhain Mill Plus Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2100 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Machine length: 11.000 mm Machine width: 5.000 mm Machine Height: 3.500 mm Max. Workpiece diameter: 2500 mm Max. Workpiece Weight: 6.000 kg Max. rotary table diameter: 1.850 O Table speed range: 250 min/-1 Tool Taper: HSK-A100 Tool Piece Magazine With: 183 Pcs./pcs. Spindle Speed: 12.000 RPM Max. Torque On The Boring Spindle: 288 Nm Max. Torque: 2.000 Nm Feed Speeds X/Y/Z Axis: 30.000 mm / min Max. Workpiece height: 1.460 mm axes: 5 Further information: Turning and milling center incl. pallet changing system Gear spindle Bodpfx Alozkpupe Ajdh Coolant treatment system, with belt filter, 710 x 50mm 1 Knoll 600S2 chip conveyor 2 Losma oil mist extraction units 1 steel platform (storage space for clamping device): 5,300 x 2,900 mm - Axes renewed 11.2024 - New encoder, electrical components renewed - Geometry protocols available Machine is still in production and under power. The machine can be viewed at any time by appointment.

Condition: used, turning diameter over bed 410 mm turning diameter over slide rest 260 mm Bdedjwz Ruzjpfx Al Aoh turning length 1000 mm turning speeds 40 - 2000 U/min centre height 205 mm spindle bore 50 mm total power requirement 4,5 KW weight of the machine ca. 1,6 t dimensions of the machine ca. 2,4 x 1,3 x 1,5 m Leadscrew lathe - with copying device - 200mm 3-jaw chuck - 2x Multifix quick-change tool holders - Live center - Machine light - Chip tray

Condition: excellent (used), Year of construction: 2024, Traverses X Y Z: 660mm x 406mm x 508mm, table size 762mm x 356mm, 10000rpm spindle, 20 station ATC, Bdedpjz Hayrsfx Al Aeh DIN40 spindle taper, Hurco WINMAX 5 control, coolant, Swarf Auger

Condition: ready for operation (used), turning diameter over cross slide: 530 mm, turning diameter: 800 mm, overall weight: 10,000 kg, Poreba Heavy Duty Gap Bed Lathe Model: TPK 80 Distance Between Centres: 5000mm Swing Over Bed: 800mm Swing Over Topslide: 530mm Swing In Gap: 1080 x 200mm Spindle Speeds: 8-1500 RPM Spindle Bore: 95mm Motor: 23 KW Machine With: 800mm 4 Jaw Chuck Bdodpfxsz Dh U Ss Al Ajh 400mm Roller Steady 300mm Pad Steady

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 410 mm, controller manufacturer: Siemens, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Bjdpfxjz Ahxqo Al Aodh Travel range X: 560 mm Travel range Y: 410 mm Travel range Z: 410 mm Clamping area: 650 × 410 mm Table load: 250 kg Spindle speed: 12,000 rpm Tool holder: SK 40 MACHINE DETAILS Control system: Siemens