Used Unwinder for sale (326)

Condition: as good as new (ex-display), Year of construction: 2021, machine/vehicle number: 06 61 218, Comm. no.: Lg 32821 Single side decoiler BBT ABH 2000/400 exhibition machine, unused machine no.: 06 62 218 year of manufacture: 2021 Technical data load capacity approx. max. 2.000 kg strip width max. 400 mm Coil inner diameter approx. 450 to 520 mm Coil outer diameter max. 1,500 mm Unwinding speed approx. 2 to 15 min.-1 With adjustable drive and loop control via ultrasonic sensor Dkjdpeg U Utvjfx Apwjl (analog). Drive by frequency-controlled three-phase geared motor. Spreading of the support segments manually by means of hand crank via joints Number of supporting segments 3 Coil side guide via strong limiting arms, clampable. Reel stand in strong box construction as welded design. construction. Additional equipment: Shutdown "belt loop too small" by antenna switch, attached to the column of the bottom housing of the loop control. Infinitely adjustable in height. Tape side guide at the bottom housing of the loop control, by means of lateral guide rods. The passage width is continuously adjustable.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Window patcher KOHMANN - 750 - age 1999 Single Stream Length punched min. 100mm / max. 1020mm Width punched min. 80mm / max. 750mm Film length min. 50mm / max. 720mm Width film min. 30mm / max. 540mm Timed bottom Feeder Large Selection of Operating Cams Slitting/perforating Film unwind, Continuous Belt Delivery, Suck Blow Pumps Electrical Control Cabinet Manuals Tools Located: Europe Western Current State: In production Available: Immediately More pictures and video is available. Dodsyzyhwepfx Apwokl PRICE under request.

Condition: ready for operation (used), functionality: fully functional, type of input current: AC, input voltage: 230 V, We offer this ready-to-use Heidelberg printing press, model SBB 570mm x 820mm 22 ½" x 32", year of manufacture: unknown. Heidelberg cylinder with hot foil stamping and die cutting attachment Heidelberg SBB 570mm x 820mm 22 ½" x 32 ¼" Dkedpsy Izl Djfx Apwsl Aluminum heating plate from 2019 divided into 3 heating sections Temperature control: up to 200° C 2 independent foil feed tracks Option of foil feed in cyclic mode Single foil unwinder Power supply: 230 V / 400 V AC 50 HZ Total power consumption: 4.7 kW Heating plate power: 4.5 kW The removable heating plate allows the machine to be converted from gilding to die cutting Maximum mechanical paper handling speed: 2,500/hour Maximum sheet size: 570 x 820 mm For questions or further information, please send a message or contact us by phone.

Condition: used, Year of construction: 1995, working width: 1,300 mm, compressed air connection: 7 bar, Machine type: Coating and laminating line for coating, lacquering, and laminating from roll to roll using solvent-free adhesives. Manufacturer: NORDMECCANICA Type: Duplex Compact Model: Duplex C - SL1300 Year of manufacture: 1995 Web width: 650 to 1,310 mm Laminating width: Up to 1,300 mm Speed: Mechanical up to 300 m/min. Materials for coating: BOPP 15 - 80 µm PETP 12 - 30 µm LDPE, LLDPE 40 - 200 µm OPA 12 - 18 µm NYLON CAST 50 - 80 µm ALUMINIUM 15 - 40 µm PP CAST 60 - 150 µm SATIN PAPER 40 - 300 g/m2 Materials for lamination: BOPP 12 - 80 µm PETP 12 - 30 µm LDPE, LLDPE 20 - 200 µm OPA 12 - 18 µm NYLON CAST 20 - 80 µm ALUMINIUM 7 - 40 µm PP CAST 25 - 150 µm EVOH 12 - 20 µm CAST MATERIALS 25 - 200 µm SATIN PAPER 40 - 300 g/m2 Unwind A: Model 850 Roll change Automatic up to 300 µm Roll diameter 90 to 850 mm Roll weight Up to 900 kg Core diameter 70/76/150/152 mm Web tension 2.5 to 55 kg Coating thickness Up to 300 µm Pre-treatment Corona Unwind B: Model 850 Roll change Automatic up to 300 µm Roll diameter 90 to 850 mm Roll weight Up to 900 kg Core diameter 70/76/150/152 mm Web tension 2.5 to 55 kg Coating thickness Up to 300 µm Pre-treatment Corona Coating and laminating unit: For solvent-free adhesives. Coating section with 4 rollers, 2 of which are heated. Laminating section with 3 rollers. Rewind: Model 850 Roll change Automatic up to 300 µm Roll diameter 170 to 850 mm Roll weight Up to 900 kg Core diameter 150/152 mm Web tension 6 to 55 kg Coating thickness Up to 500 µm Mixing and dosing unit: Manufacturer: DOPAG, Switzerland Model: Variomix Heating elements. 1 trolley for mounting transfer rollers for adhesives. Electrical connection: 220 / 3 x 400 V, 50 Hz Dedpfx Apjy Hgwpjwokl Installed power: 180 kW Maximum current draw: 90 A Average power: 35 kW Compressed air connection: Input pressure: 7 and 10 bar Max. consumption: 400 l/min Water consumption: 2,000 l/h Various spare parts included. Standards: CE, CEE 89 / 392 ff. EN 60 204-1, SUVA Condition: Used (occasion) Availability: Immediately

Condition: used, Year of construction: 2008, GENERAL TECHNICAL DATA: Performance Mechanical speed: up to 450 m/min Production speed: depending on substrates and adhesive system Web & Dimensions Maximum web width: 1330 mm Maximum laminating width: 1315 mm Minimum web width: 600 mm Roll Specifications Maximum roll diameter: • Unwinder: 1000 mm • Rewinder: 1000 mm Core diameters: • Unwinder: 3” / 6” (76 / 152 mm) • Rewinder: 6” (152 mm) Web Tension Unwinding: 500 N Rewinding (with taper tension): 550 N Electrical Data Voltage: 3 × 400 V ±10%, 50 Hz (without neutral) Total installed power: 85 kW Maximum input current: 120 A Main switch: 150 A Pneumatic Requirements Pressure: 6 – 9 bar Consumption: 70 l/min Feed connection: 1/2” Hydraulic System Pressure: 3 bar Cooling consumption: up to 2700 l/h Feed connection: 1/2” Cooling System Water pressure: max. 5 bar Water temperature: 15–20°C Temperature difference: 4°C Pressure difference: 2.5 bar Flow rate: 2000 l/h Machine Configuration • Shaftless unwinder (primary & secondary) • Shaftless rewinder • Automatic web guiding system • Adhesive metering system (5-roll application unit) • Laminating unit with pressure rollers • Cooling calender • PLC-controlled drive system Dodpfxoy Er A Us Apwskl • Touch screen control interface Materials (Supported) • Aluminium (ALU) • BOPP • LDPE / LLDPE • Nylon (Cast) • OPA • PET / PETP • PP (Cast) • Paper Material Thickness Range Films: approx. 7 – 200 µm (depending on material) Paper: 40 – 200 gsm Working Conditions Temperature: 10 – 40°C Humidity: 30 – 90% (non-condensing) Additional Equipment • Optional water chiller: approx. 21 kW cooling capacity • Closed-loop cooling system possible Control & Automation • PLC control system • Inverter-driven motors • Recipe storage (up to 500 jobs) • Production monitoring (speed, meters, tension) • Emergency stop system

Condition: new, Year of construction: 2026, Packaging line for the production and packaging of wet wipes, e.g. hygiene wipes, cleaning wipes, baby wipes, disinfecting wipes. The production process includes unwinding of the nonwoven from the jumbo roll, slitting for a 2-lane production process (until packaging), dipping into liquid, longitudinal folding in Z- or W-fold, cross cutting (tissue length), 1 x cross folding, stacking, continue to packaging unit which handles film feeding and wrapping wet wipes, punching the hole (to open the pack), positioning of reclosable label, bag cutting/heat sealing. Integrated splice units increase efficiency during material, film and label role changeover. - Specifications: suitable for dry nonwovens (airlaid, spunlaid); folds: Z or W shape (change of folding tool necessary); fold face adjustable per side; dimensions of folded tissue: L(70-100)xW(40-100) mm; dimensions of unfolded tissue: L(140-200)xW(140-200) mm; number of wet wipes per pack (min. to max.): 5-30 pieces; grammage wet wipe: 35-80g/m²; speed of the machine in neutral: max. 900 wipes/minute or max. 90 packs/minute; bag size: depending on folding dimensions and number of wipes per pack; film roll dimensions: width max. 280 mm, diameter: max. 400 mm; suitable films: OPP film (transparent, printed or laminated); nonwoven jumbo roll dimensions: width 280-400 mm, diameter max. 1200 mm; label roll dimensions: width max. 60 mm, diameter max. 300 mm; power: 25kW, 380V; machine dimensions: L8500xW1520xH2350 mm; weight: 5000kg. Dkjdpfx Apsv Nma Rswel Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: good (used), Year of construction: 2015, web offset-flexo printing machine register BST camera control system unwinder semi rotary uv flexo chamber no.1 semi rotary uv flexo chamber no.2 semi rotary uv offset no.1 semi rotary uv offset no.2 cold embossing unit for offset semi rotary uv offset no.3 semi rotary uv offset no.4 semi rotary uv offset no.5 semi rotary uv offset no.6 Dkodpfjwgittjx Apwol semi rotary uv flexo chamber varnishing no.3 semi rotary die-cutting rewinder max speed 50 - 180 m/min color range 4 - 10 colors max print length 350 mm max paper width 320 mm max print width 300 mm max unwinding diameter 700 mm max rewinding diameter 600 mm machine including process-free CTP Agfa PT - R4300S

Year of construction: 1995, condition: ready for operation (used), functionality: fully functional, working width: 1,450 mm, mount diameter: 800 mm, number of feed rollers: 2, section length (max.): 1,560 mm, The machine is equipped with 2 unwinding stations, allowing you to process double the quantity of cut lengths simultaneously. The machine speed is 50 m per minute. In the longitudinal direction, 3 knives can be set, enabling the width to be halved and a trim to be cut off on each side. The unwinding station is equipped with 3-inch and 6-inch pneumatic expanding shafts. We have successfully processed BO PET films with thicknesses ranging from 36 to 250 microns. The machine is fully connected, can be inspected daily, and, by arrangement, customer material can also be tested. We would disassemble and load the machine, either onto a truck or into a container. Dkodpfx Asy D Edcepwel

Condition: used, Year of construction: 2021, machine/vehicle number: ET235, Used Sleever labelling machine 4000 BPHTechnical Specifications & Performance DataThe ULISSE 4000 is an automatic sleeving labeling machine engineered by Scaligera for high-quality application of shrink sleeves on cylindrical containers. Built in 2021, this second hand equipment is designed for integration in a used bottling line and industrial packaging environments for beverage production. Its robust AISI 304 stainless steel construction, Omron automation, and precision cutting system ensure repeatable, accurate sleeve placement prior to steam shrink.Manufacturer: ScaligeraModel: ULISSE 4000Year: 2021Machine type: Automatic sleeve applicator (Labeling Machine)Installed electrical power (applicator): 3 kWCompressed air consumption (applicator): 80 Nl/minControl system: PLC Omron with 7-inch color touchscreen HMICutting system: 1 rotating-blade cutting head, register-controlledMaterials: AISI 304 stainless steel frame and guards; anodized aluminum and chromed steel componentsIncluded conveyor: Scaligera K325, approx. 7.5 m total length, chain 82.5 mm, inverter-drivenShrink tunnel (included): Scaligera TVP3SE steam tunnel, 3 independent steam sections, 6 injection cells, electronic temperature control, inverter-driven exhaust, installed electrical power: 11 kW, minimum steam pressure: 5 barRotary accumulation table (included): Ø 1200 mm, power: 0.5 kWElectric steam boiler (included): COMETH GEI 54 KW 75, 3 × 25 kW resistors, 380 V 50 Hz, steam output approx. 100 kg/h, stainless steel water tank approx. 80 L, capacity approx. 60 LSafety: CE-compliant interlocked guards and protectionsAdvanced Automation & Control SystemsThe ULISSE 4000 integrates advanced automation to optimize sleeve application accuracy and uptime. The external unwind with mechanical dancer ensures stable film tension. Motorized traction rollers launch the sleeve at high speed, with automatic opening and adjustment. Film length is photoelectrically controlled and synchronized to product presence for precise register cutting. Operators interact through a 7-inch color touchscreen HMI with Omron PLC control, enabling recipe management and quick parameter adjustments.Automatic sleeve advance and register-controlled cuttingMotorized rollers with automatic opening and regulationPhotocells for film length regulation, infeed product absence, and outfeed jam detectionMicrometric adjustment handwheels with counters for repeatable settingsInterlocked safety doors and CE-compliant protectionsProduction Line Integration CapabilitiesThis sleeving machine is supplied with a matched steam shrink solution and conveying to facilitate rapid integration in a used bottling line or standalone industrial packaging cell. The Scaligera K325 conveyor (approx. 7.5 m) provides stable product handling, while the TVP3SE... Dkjdpfx Aoy Ef Tmepwjl

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 828-043, total width: 1,800 mm, number of ink cartridges: 8, color channels: 7, number of print heads: 64, The Kornit Allegro is a powerful textile printing machine that offers outstanding print quality, high speed and versatility. It is particularly suitable for textile printing companies that want to produce first-class prints in large quantities (roll-to-roll) on a wide variety of fabrics. To date, it has been used primarily for cotton fabrics: jersey, French terry, cotton woven fabrics, canvas, sweat and viscose & modal qualities. For sale due to business downsizing. The textile printing machine is currently still in operation and can be viewed at any time by appointment. Dsdevmdw Iepfx Apwokl The following are available for sale with the machine: main and backup air compressors, dryer, unwinder & rewinder. So a complete production line. We are also selling all available spare parts, colors, etc. Technical specifications: Ink type: Kornit NeoPigment Intenso, water-based Ink capacity: 4 liters Colors: Cyan, magenta, yellow, black, red, green, gray Print heads: 64 x Spectra Polaris, recirculating - (7 color channels, 1 channel for pre-treatment) Print width up to 180 cm Print speed: Up to 200m²/ hour Print modes: Multiple print modes from 400-1200 dpi Recommended print mode: 600 x 600 dpi in 6 passes in interlaced mode Weight: 3500 kg Power supply: 110/220V, 60/50 Hz, 40A, 3Ph+N+GND 25kW Media transport: High-precision, adhesive belt conveyor system Fabric feed system: Axial unwinding device with adjustable fabric width and Tensioning mechanisms Max media thickness: 15 mm Max roll width 180 cm Max roll outer diameter: 40 cm Max roll weight: 50 kg Compressed air: 6-8 bar/ < 0.4 m³/min

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, Thanks to its compact dimensions and quick mould change, it is the ideal solution for small delis and supermarkets. The machine can be fitted with the patented INFINITY modular J Pack mould or with customised moulds. Optionally also available with gas flushing. Dksdjl Eylajpfx Apwel Features: - Mould change - Customisable mould - Automatic film unwinding - Acoustic end-of-cycle buzzer - Partial and total cycle counter Technical Specifications: - Dimensions: 295 mm x 450 mm x 550 mm - Weight: 25 kg - Max. tray size: 260 mm x 195 mm x 155 mm - Max. reel width and diameter: L= 210 / Ø 200 mm - Feeding: Electric - Tray loading and handling: Manual + Electric - Mould: Infinity / Fixed, no die-cut - Cycles per minute: 3 - 8 - Custom digital welding programmes: 9 - Power supply: 220 V / 750 W

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 20170259471, total length: 22,000 mm, total height: 2,000 mm, total width: 2,000 mm, control cabinet length: 2,400 mm, control cabinet width: 400 mm, warranty duration: 12 months, control cabinet height: 2,200 mm, year of last overhaul: 2025, Side Sealing Machine - Manufacturer: BVM Brunner GmbH & Co. KG - Machine type: Comtex 4G - Machine No.: 20170259471 - Year of manufacture: 2017 - BVM reference no.: 5947 - Voltage, Frequency: 3N 400V, 50Hz - Power specifications: P=18kW, I=26A, F=32AT - Condition: Fully refurbished with warranty Comtex 4G Shipping System: The BVM shipping system ‘Comtex 4G Shipping’ is the complete solution for mailing various items directly to customers, including labeling. Delivery notes, invoices, and goods are packed together in a tightly sealed PE film bag, labeled with the address sticker, and handed directly over to the respective logistics partner. Technical data: - Seal width: 750 mm (transverse), 800 mm (longitudinal) - Product height: up to 250 mm Dedow Ryt Djpfx Apwokl - Capacity: Up to 25 cycles/min* (Special) features: - Special color - Signal control light with three colors to indicate error messages - Pneumatically operated buffer plate and presence control for the film waste tray, enabling tray change during automatic operation (no machine stoppage required). Note: At this station, the Comtex working height is limited to 850 +/- 10 mm. - Electronically controlled sealing bar drive (servo-driven, stepless speed adjustment) - Film end detection by ultrasonic sensor, incl. analog input card (one per film carrier) - Mechanical distribution device for film scrap strips in combination with a large film scrap storage - Individual wire numbering in the control cabinet of the packaging machine for Comtex 3G and 4G - Grooved aluminum profile covered with plastic profile - Bypass conveyor as folding belt integrated in the Comtex downstream of the side sealing station for transferring products out of the machine - Film folding device (no separate control) for converting flat film into center-folded film - Film sealing device for flat films - PN/PN coupler (Profinet coupler) for establishing a Profinet connection - Software development for PN/PN coupling including release connection, interlock and combined fault message - Film end detection at the film mount and film level detection at the film unwinder, detected by photoelectric sensors, including three-color signal lamp and acoustic signal - Mounting preparation for labeler, suitable models on request, installed at the infeed including electrical and pneumatic connections - Sealing bar for producing a wide seal seam with separate cold knife cut, suitable for Comtex 3G, 4G and Compacta with EGS - Manual labeling device with linear motion (Model: Caljan Type: FPS BVM L113 L) - Reclosable film bag by means of double-sided adhesive tape in the film bag, incl. tear-off perforation wheel - Additional tear-off perforation wheel, allowing complete removal of the bag’s edge area - Stand-alone control cabinet for Comtex with 5 meter cable - Two sequentially mounted indexing belts (600 x 900 mm/600 x 14,000 mm) for Comtex 4G (total length 14,950 mm) with space for installation of a scanner or camera incl. trigger light curtain for scanner - Height adjustment of cross seal for pass-through height 220-250 mm - Cognex scanner system, consisting of: -- Scanner below the infeed for delivery notes -- 2 overhead scanners -- 1 overhead scanner for control +++ Fully refurbished equipment with 12-month warranty according to our attached warranty conditions +++

Condition: good (used), Year of construction: 2021, Machine installs elastic band pen loops to hardcovers for notebooks, agendas etc. . Fully automatic operation - glue application, elastic unwinding and cutting, elastic glueing, elastic folding and pressing. Machine is in good condition, still in production, tests possible. Dkedpfx Apottavlowel Discount when purchased together with the elastic machine.

Year of construction: 2007, condition: like new (used), Unwinder with paper splicing table 6 letterpress printing units Dksdpsy Hiagjfx Apwol 1 flexo printing unit Semi-rotary die-cutting unit Inspection system with freeze frame Semi-rotary electronic advance Finishing section with independent electronic advance, comprising: Flat hot stamping unit Laminating unit Flatbed die-cutting / embossing unit Waste removal / rewinder with longitudinal slitting Various spare parts

Year of construction: 2016, condition: excellent (used), functionality: fully functional, machine/vehicle number: 116245, GM DC330 Digital die cutting machine/ converter Dsdpfx Ajylpvdopwskl Compact footprint Unwind Web guide Web width 330 In / Outfeed nip for tension control Magnetic die station 200z / 25inch to support die plates of 50mm to 520mm Distortion/ Dispro factor to handle other tooth size plates Re Reg mark reader to support the printed web Die-cut offset possible inline Lateral/ Cross movement possible Waste rewinder Slitting station with manual 7 air pressured V-knives Upper and Lower rewind with options of clock or anti clockwise rotation Label or meter counting Core mandrels/spindles of 25mm, 38mm, 44mm and 76mm x 2 Cold foil Self adhesive lamination Laminator unwind and rewind Silencer to reduce noise when using the lamination Full Flexo station Varnish tray, Picking roller, Anilox roller, Print roller included GEW UV lamp Min 6 bar air pressure required Machine Weight 1200Kg

Year of construction: 1981, condition: used, machine/vehicle number: 152, We offer the Datamail Roll Collator BIELOMATIK JUMBO DATAMAIL COLLATOR P668 for sale. Configuration: Year: 1981 Jumbo paper unwinds, Ø 127 cm (50") Carbon unwinds, Ø 70 cm Cross glue unit NOT AVAILABLE! Programmable length gluing unit NOT AVAILABLE! Die-cutting cylinders in various sizes and cams for numbering machines. Snap out delivery with batcher and forward numbering capability (Bielomatik VWZ) – not visible in the photos. Includes some spare parts. Machine is operational. Video available upon request. Dkjdpjum T Ncofx Apwsl Price including disassembly: 9,000 EUR.

Condition: like new (used), Year of construction: 2013, type of input current: three-phase, Brand: POLYPACK POLY JUNIOR 2080TL shrink wrap tunnel year of production: 2013 Automatic shrink wrapping machine with motorized conveyor. product dimensions max: 800x600x600mm product dimensions mini: 200x50x50 mm Power supply on the right Output approx. 7-10 cycles / minute Working height: 850 mm Energy: 30 KW / 380 V three-phase / Compressed air 5-7 bar Product sensor cell Motorized upper and lower coil unwinder Schneider display Schneider PLC Film reel: - 35-90 microns - maximum diameter 400 mm - maximum width 600 mm Tunnel size Ho 1500 x W 800 x Ma 600 mm stainless film welding width: 800 mm Stainless steel structure Dkjdpfshv Sldsx Apwol machine length:

Condition: good (used), Double reel, reel, unwind reel -Unwind reel: Double reel with 2 servo motors (each reel driven individually) -Drive: 2 Nucleus NUDrive MP85 10A Bgr2 R Rev2 IP64 servo motors Dksdpfxjylil Ee Apwsl -Reel: Ø 1050 mm -Photos: see photos -Dimensions: 1050/840/H1755 mm -Weight: 200 kg

Condition: not inspected (used), Year of construction: 1985, functionality: unexamined, overall weight: 15,000 kg, Producer: Windmöller & Hölscher Type: QMS 8510 Colours: 4 colors, CI With doctor blades Print width: 800 mm Repeats: from 23 to 80 cm Speed: 150 metres/minute Unwinder/rewinder: max. 1,000 mm With longitudinal slitting Dsdpfx Apey Icycowjkl Sleeves: approx. 300 air sleeves with the machine

Condition: reconditioned (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 87A, total width: 2,400 mm, total length: 10,500 mm, total height: 2,300 mm, cutting length (max.): 670 mm, type of input current: three-phase, overall weight: 9,000 kg, Holweg RS2 (42GL) Year 1988 Brand: Holweg Model: RS2 (42GL), modified for standard single-channel RS21 operation Year: 1988 For the production of flat-bottom paper bags, with or without gusset. Machine overhauled: new electrical components, new 3-phase main motor with frequency inverter, unwind station with new Renova Italy electronic brake system and dancer roller. Equipped with inline 4-color flexographic printer model IS 80, maximum print width 800 mm. Printing sleeves included: 4 x 220 mm, 3 x 320 mm, 1 x 370 mm, 1 x 380 mm, 4 x 400 mm, 4 x 430 mm, 4 x 440 mm, 1 x 520 mm, 3 x 520 mm, 3 x 580 mm, 6 x 660 mm, 3 x 680 mm. Gears: - 320 mm: 4 printing gears + 2 machine gears - 340 mm: 4 printing gears + 2 machine gears + 1 printer gear - 380 mm: 4 printing gears + 2 machine gears + 1 printer gear - 440 mm: 4 printing gears + 2 machine gears + 1 printer gear - 520 mm: 4 printing gears + 1 machine gear - 580 mm (290): 4 printing gears + 2 machine gears + 1 printer gear - 680 mm: 4 printing gears + 2 machine gears + 1 printer gear Forming plates: 1 x 90 mm, 1 x 120 mm, 1 x 140 mm, 1 x 150 mm, 1 x 170 mm, 1 x 180 mm, 1 x 200 mm, 1 x 240 mm, 1 x 300 mm. Note: Gluing knives for different bag widths are not included. Printer shafts/adapters: 4 printer shafts included, compatible with the printing sleeves listed above. Perforation type. Max unwinder diameter: 1,200 mm Pneumatic shaft: 70 mm Max paper width: 900 mm Min–max bag width: 70–340 mm (current owner produced only one bag size: 140 mm width x 260 mm length) Cut-off length: 190–680 mm Min–max bag length: 180–670 mm Working speed: 400–800 bags/min (depending on bag size) Suitable paper: 30–70 g/m² Machine can be inspected in operation. Dkedpey Iclxjfx Apwjl Immediately available.

Year of construction: 2021, condition: ready for operation (used), total height: 1,300 mm, product length (max.): 4,500 mm, Pipe Production Line manufactured in 2021. This Bazhou Wanxin machine features a dual-station decoiler, hydraulic shear and butt-welding machine, and a cold saw for precise cutting of pipes. It accommodates round pipes with diameters from Ø16-63.5 mm and offers a feeding speed of up to 120 m/min. Consider the opportunity to buy this Bazhou Wanxin Pipe Production Line. Contact us for further details. • Dual-station decoiler • Function: Passively unwinds the coil • Construction: Dual-station with 180° rotation; manual expansion • Advantage: Fast loading, simple operation • Hydraulic shear and butt-welding machine • Function: Cuts front/rear strip ends, centers, and re-welds • Construction: Manual hydraulic shear with boom; front/rear pressure rollers; front/rear centering rollers; welding device • Cutting method: Hydraulic shear • Pressing method: Double-cylinder press • Welding method: Manual welding • Coil accumulator • Function: Ensures continuous production during strip changeover • Construction: Frame type with movable and fixed frames (incl. feeding device) • Feeding speed: max 120 m/min • Storage speed: max 200 m/min • Stored strip length: 200–400 m • Pinching roller motor: AC 11 kW • Forming and calibration machine • Working height: +850 mm • Main drive power: AC/DC motor 160 kW, 1000–2000 rpm; reducer: gear-hardened; gearbox: spiral bevel gear • Entry/formation: Passive 5-roll straightener; vertical rolls for strip feeding; forming via 7 horizontal + 8 vertical roll stands • Guiding/pressing/deburring/cooling/calibration: 6 horizontal + 5 vertical roll stands; 1 round calibration stand • Round calibration stand: 1 smoothing device; 2 sides with 8 rolls (4 per side); Ø30 mm rolls, 40Cr, quenched/tempered/hardened • Horizontal roller shaft: Ø60 mm, bearing position 55, material 40Cr; surface hardening HRC 50–55 • Vertical roller shaft: Ø40 mm, material 40Cr, quenched/tempered/hardened • Bearing slider: Forged steel 45# • Stand style: Gantry type; opening width 120 mm; horizontal stand clamping adjustable via worm gear • Stands material: Welded, aging annealed • Pinching roller shaft: Ø50 mm, 2 rollers, manual screw adjustment • Guide shaft: Ø40 mm • Deburring knife: 2 pcs (1 in use, 1 spare) • Cooling tank: Included • Cold saw (Type KK-5-50) • Function: Cuts pipes to preset length at line speed • Pipe diameter: Round Ø16–63.5 mm (and corresponding square/rectangular) • Cutting length: 1–6 m • Material thickness: 0.6–2.5 mm Dsdpfjyhfvlex Apwjkl • Saw motor: 11 kW AC with frequency inverter • Feeding motor: 2.9 kW servo (Yaskawa) • Drive motor: 11 kW servo (Yaskawa) • Feeding mode: Servo multi-stage speed • Speed following: max 110 m/min • Clamping: Pneumatic • Saw blade: Ø400 mm • Saw reducer: Model KK-80 • Sawing stroke (rack length): 3 mNote • The technical data and descriptions are transcribed from the original order confirmation and are for informational purposes only; they are not binding. Additional equipment • Conveyor track, table, and packing machine • Function: Automatic pipe transfer from mill to table; packages into hexagonal bundles • Roller track length: 16 m • Drive: 1 motor YCT200-4A, 5.5 kW

Year of construction: 2025, condition: ready for operation (used), This Barberan WM-33 was manufactured in 2025. A profile wrapping machine designed for versatility, it handles various materials including PVC and aluminum. It supports a wide range of foil types and utilizes PUR hot melt adhesives. Key features include a max mechanical speed of 60 m/min, profile dimensions up to 300 mm wide and 120 mm high, and a total machine length of 6000 mm. Contact us for more information about this machine. Additional equipment • Machine bed, slot nozzle head, mounts for wrapping tools • Complete tool set for PVC/Aluminum profiles • Operator safety system and control cabinet • Set of nozzles for profile cleaning • Protective foil unwinder and hot air turbines • Infrared screen with lamps and tool cassette Machine Benefits Qualitative Machine Benefits • Machine entry section with heavy-duty steel frame • Transport rollers with motor-driven frequency converter Dkedpfx Asyaa Utspwjl • Integrated control cabinet • Emergency safety systems • Glue unit safety mesh • Operator control panel for adhesive management • Two 15 mm wide rollers per shaft, 240 mm diameter • Quick positioning in 5 mm steps • Air blowers & ionization for static and dust removal • Automatic primer station with precise application Technical Machine Benefits • The profile wrapping machine is designed to wrap profiles of various shapes, sizes, and materials using different foils with hot melt adhesives. • Operates as a standalone unit or part of a complete production line. • Capable of working with materials such as pvc, aluminum, and some composites. • Various foil types are compatible, special configurations may be needed for certain materials. • Profile dimensions: width 25–300 mm, length ≥600 mm, height 4–120 mm • Foil dimensions: width 25–330 mm, outer roll diameter ≤600 mm, inner roll diameter 76 mm • Max mechanical speed: 60 m/min • Working height: 900 mm • Voltage: 400v – 50hz • Compressed air: 6 bar Extra Information Machine still under power. 6 self-regulating heaters, expandable to 8. Slot Nozzle Head (330 mm) for adhesive application. Roll diameter up to 600 mm. Magnetic powder brake for tension control. Infrared screen for foil heating. Foil applied with shaped rubber rollers. Quick profile shape change system. For foil rolls up to 600 mm diameter. Height-adjustable for pressure control. The system is versatile with components designed to enhance processing efficiency and adaptability for various production needs. Dimensions Machine Depth 6000 mm

Condition: ready for operation (used), Year of construction: 1994, A Stiegler side weld bag-making machine in need of repair is available. Working width: 1000mm, film material: PE/PP, feed range: 80mm-600mm, max. clearance: 900mm, film width range: 200mm-1380mm, film thickness range: 0.025mm-0.085mm, output: 160cycles/min, max. C-fold triangle: 1380mm. Including bottom gusset device, hot stamping units, thermal transfer units, ribbon unwinding unit, unwinding station and various accessories. The control system of the line must be renewed. Documentation available. An on-site inspection is possible. Dsdpfxsyx H H Ue Apwokl

Condition: good (used), Year of construction: 1991, functionality: fully functional, product width (max.): 2,500 mm, working width: 2,500 mm, roll diameter: 1,500 mm, year of last overhaul: 2024, We have available for sale a Cobden Chadwick pre-print press line- 2500mm wide- see photographs. This is a fantastic opportunity and is the best conditioned pre-print press we have ever offered for sale/relocation. The machine controls were upgraded by Pre-Print Technology Ltd in 2017 – new servo control deck positioning + downstream register system. Please kindly let us know as soon as possible if you would like to visit the site to inspect the press line. Cobden Chadwick Linerflex press - manufactured 1991 Machine location: United Kingdom Cobden Chadwick Linerflex press consisting of the following 6 colour C.I 1 colour pre-tint unit with cantilever Djdpfxst Uc Iqe Apwskl 1 colour downstream unit with cantilever Twin Wood & Stirling unwind Marquip splicer Warburton rewind Drive system for pre-tint, chill rollers, varnish unit and rewind Drying: IR cassettes by Waverley Fife web guiders Sero motors for print deck positioning Original press performance parameters; Maximum speed: 300 metres per minute Repeat range: 700mm to 2000mm all units Gear pith: 10mm Maximum print width: 98” PLC: Mitsubishi Main press frames: Light blue azure Ancillary equipment Heaford Cobra mounter proofer AV Flexologic Mounter proofer Print roll stock (120 off) including print gear and sleeve attachments Anilox roller stock (17off) including anilox gear and clutch attachments. Cantilever print sleeves (12off) Print roller and anilox storage racking system with overhead hoist C.I temperature control unit Chiller unit for chill rolls Print unit doctor chambers with related inking system Mobile operator trolley for print deck access Mobile Print roller and anilox roller trolleys C.I hoist lifting attachment bar Machine voltage: 415V, 50hz

Condition: good (used), Straightening machine, wire straightening machine, unwinder, straightening machine combination, pay-off reel, wire unwinder, double reel, reel, pay-off reel, motor-driven reel for wire processing, punch, eccentric press, hydraulic press, punching machine, motor reel, winding roll, unwinder, wire unwinder -Wire straightening machine: decoiler-straightener combination Dkjdpfxein Rn Aj Apwol -Type:not visible -Note: without documentation -Engine: Fukota 1.5 kW -Straightening rollers: for Ø 20 mm, see photos -Receiving rollers: Ø 152/215 x 1330 mm -Total dimensions: 3040/2450/H2525 mm -Weight: 2080 kg