Used Uv Printers for sale (2,006)

Condition: used, EOS Type: P100 Technical Data: External dimensions: 1320 mm x 1067 mm x 2204 mm Technology: SLS Material class: Polymers Materials: PA220 Build volume: 200 x 250 x 330 mm Laser type: CO2; 30 W Gedpfx Aexpux Rjadetu Capable of producing delicate components with wall thicknesses down to 0.4 mm. Fits through a standard door (1067 mm width); therefore, it can be installed in regular premises. + 6 filled powder containers PA2200 (PA12) + 2 build frames 400 V +6%/-10% at 50/60 Hz; CEE 5-pole Condition: used Scope of delivery: (see image) (Subject to technical modifications and errors. All information is provided without guarantee!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), 3D systems Here we offer you a 3D printer. Solid-state Nd: YVO4with triple frequency Wavelength: 354.7nm Nominal power at the laser head: 1450 mW (1000mW at the resin surface under standard conditions) Zaphyr TM coating system: Process: Replaceable coating agent Adjustment: Self-leveling and self-correcting Production layer: Minimum 0.05mm Maximum 0.15mm ProScan™ scanner Edge detection (diameter at 1/e2): Nominal in standard mode 0.13mm Detection of large lines Nominal: 0.76mm Maximum drawing speed Edge detection: 3.5m/sec. Detection of large lines: 25m/sec. Build volume capacity: RDM 750F: 650mm x 750mm x 550mm; 414l Maximum part weight: 75kg Power supply: 200-240VAC (alternating current), 50/60Hz single-phase, 30A Gjdjnkalgjpfx Aadotu Ambient conditions Temperature range: 20-26°C Max. permissible fluctuation: 1°C per hour Relative humidity: 20-50%, non-condensing Space requirement: Size (WxDxH), unpacked: 1260mm x 2200mm x 2280mm Weight packed (no RDM): 1590kg Type: iPro 8000 Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, Concept Laser M2 cusing Multilaser: System technology for the safe processing of aluminum and titanium alloys, etc. External dimensions: 2542 x 1818 x1987 mm (WxDxH) Weight: 2300 kg 2 lasers 400W Power supply: 3P/N/PE AC 400 V, 32 A 5 bar compressed air required Protective gas possible through 2 connections for external N2 generators (optional) Installation space 250 x 250 x 280 Layer thickness 20-80μm Production speed 2-20cm³ (depending on material and laser power) Operating conditions 15-35 degrees Celsius Gtjdpsu Ebybofx Aadsu Laser service life Laser 1: 501 hours Laser 2: 503 hours Other devices: Inox 200 lifting device Weight: 102 Kg Max lifting capacity 135 Kg Protection class IP65 Wet cutter NA 7-11 H CL EU Zone 22 Dimensions 800x480-570x755-850 mm Drive type: alternating current Power 1.25 kw Voltage 230 V 9.2 A Protection class IP65 Frequency 50 Hz Housing: sheet steel Performance 130 m³/h Permanent negative pressure -145 mbar Short-term negative pressure -235 mbar Liquid volume 7 l Water consumption: 0.26 l/h Weight: 50 kg QM powder Automatic Sieving Station Power supply: 3/N/PE AC 400 V +/- 10% 50/60 Hz Max. current consumption: 3A / phase Inert gas: 5 bar Condition: used / used Scope of delivery: (See picture) (Subject to changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer you a 3D-SYSTEMS 3D printer. The ZPrinter ProJet 660 Pro 3D printer has a large installation space. Thus, even large models can be manufactured without prior cutting. Furthermore, the large footprint increases productivity when printing many small models in one print run. 3D color printer with enormous productivity and color fidelity. The ProJet ColorJet color 3D printers from "3D Systems", also known as ZPrinter, work layer-forming according to the ColorJet CJP "Binder Jetting" process, directly in a powder bed. This eliminates the need for dedicated support structures, even for complex and detailed prints with these 3D printers. The unconsolidated powder supports the parts during printing and is then recycled semi-automatically. Areas of application Communication of form and design, installation analysis, initial functional testing, variant testing, form finding, design, development, marketing, sales, master models for thermoforming, dental models, presentation... Best ColorJet 3D color printer in its class for applications with the highest demands, it sets new standards in the field of full color 3D printing systems. Technical data: ZPrinter ProJet 660 Pro 3D Printer Size: 254 x 381 x 203 mm Color: 390,000 colors (5 print heads, including black) Resolution: 600 x 540 dpi Minimum detail size: 0.1 mm Gtedpfjhb Dtpox Aadsu Automation: Complete (automated set-up and self-monitoring, automated print

Condition: excellent (used), Desktop Metal 3D Printer Complete System Here we offer you Desktop Metal 3D printer complete system. Desktop Metal 3D printer studio system Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal Gjdpfx Ajk Hz Nqeadotu The three-part solution includes 3D printer, debinder and furnace Manufacturer Desktop Metal Model Desktop Metal Studio System Operating condition Used (Good) Year of manufacture 2019 Desktop Metal Studio System Includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology. Features: Printed materials metal Technology FDM Use Industry Other features Office X-stroke 30 cm (12 in) Y-stroke 20 cm (8 in) Z-stroke 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powders, the printer extrudes bonded metal rods - similar to an FDM printer. This eliminates the safety requirements often associated with metal 3D printing, and it enables new features such as the use of closed-cell fills for lightweight strengths. 1.2 Desktop Metal Studio debinder (delamination machine) fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (stock) Description: The debinder prepares green parts for sintering by dissolving the primary binder. With a low emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling means no need to refill between cycles. 1.3 Desktop Metal Studio Sintering Furnace hybrid technology (microwaves & conventional heating elements) Installation space 305x205x205mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Features: Function Sinter Configuration Chamber Heat source gas Other features High temperature, automatic Maximum temperature 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles matched to each design and material provide uniform heating and cooling without the residual stresses associated with laser-based systems. Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Weiss UV200SB Weathering Chamber / UV Aging Test Device Air-cooled, approx. 200 liters For sale is a Weiss UV200SB weathering chamber, a high-quality test device for simulating sunlight and weathering effects. This device is used for accelerated aging tests on plastics, paints, coatings, and other materials according to common standards (e.g., DIN EN ISO 4892-3). Technical Details UV Spectrum: approx. 290–450 nm (UVA/UVB) Lamp type: Fluorescent UV lamps Temperature range (UV phase): approx. +20 to +80 °C Climate cycling: Alternating between UV irradiation, condensation, and spray phases Humidity range: approx. 10% to 95% r.H. (relative humidity) at temperatures above approx. +10 °C Temperature change rate: approx. 3 K/min Test chamber dimensions: Height 750, Width 650, Depth 400 mm Gjdpfx Aoxdl Ixoadjtu External dimensions: Height 1800, Width 920, Depth 1345 mm Voltage: 3/N/PE AC 400V +10% 50Hz Rated power: 9.0 kW Rated current: 15.0 A Refrigerant: R 404A For your safety as a buyer! The following points are always carried out on our chambers in advance: 1. Function check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors reserved!) Further questions can be answered for you by phone.

Condition: excellent (used), German RepRap 3D Printer Here we offer you a German RepRap 3D printer. The X1000 from German RepRap is a large capacity 3D printer that produces industrial quality objects. 3D Printer Datasheet: German RepRap X1000 Manufacturer: German RepRap Country: n.a. Material: Standards (PLA, ABS, PP ...) Technology: Fusion layering (FDM/FFF) Pre-assembled: n.a. Dimension: 1725 × 1500 × 1320 mm (67.91 × 59.06 × 51.97 in.) Weight: 400 kg / 881.8 lbs Nozzle diameter: 0.4 / 0.6 mm ( in.) Minimum print density: n.a. Print speed 150 mm/s mm/sec Gtedpsivpdwjfx Aadeu Precision XY: XY : 20 µm µm Max. Volume: 1000 × 800 × 600 mm File format: n.a. Software: Simplify3D Connectivity: Wi-Fi OS compatibility: n.a. Power: n.a. Other features: Touchscreen Type: German RepRap X1000 Condition: used / used Scope of delivery: (See pictures) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2019, total length: 1,450 mm, total height: 1,800 mm, total width: 1,100 mm, type of input current: three-phase, overall weight: 3,000 kg, warranty duration: 12 months, table width: 1,450 mm, tank capacity: 19 l, table length: 1,100 mm, workpiece weight (max.): 150 kg, PRICE 95,000 EUR (excl. VAT) SERVICE INCLUDED IN THE PRICE: - Wood crate for international shipping - Installation and calibration delivered by a former Massivit employee, certified on Massivit systems - On-site operator training delivered by a former Massivit employee, certified on Massivit systems - Post-installation remote technical assistance hardware and software ( g-code production) - 1 year warranty included Professional installation delivered by a former Massivit employee, certified on Massivit systems. Possibility to run sample prints upon request DESCRIPTION of the Machine Large-scale industrial 3D printer Massivit M1800 Pro, model year 2018, professionally refurbished and fully functional. Installation, operator training and post-installation technical assistance are included and provided directly by Massivit-certified personnel. This ensures correct setup, optimal calibration and a fast, reliable start of production. The machine is equipped with dual independent print-heads and offers a build volume of 145 × 111 × 180 cm, making it suitable for the production of oversized parts, molds, master models and display elements. Gedpfx Aexx S Dieadetu The system operates with GDP (Gel Dispensing Printing) UV-cured technology, enabling high-speed manufacturing of large components with reduced support requirements, resulting in lower material consumption and reduced post-processing time. The printer has been refurbished using original-spec components and has undergone full mechanical alignment, calibration and functional testing. The machine can be inspected under power by appointment. Typical applications include visual communication, automotive and marine components, architectural elements, industrial prototyping, scenic construction and composite mold manufacturing. TECHNICAL DATA Machine type: Industrial large-format 3D printer Manufacturer: Massivit Model: M1800 Pro Year of manufacture: 2018 Build volume: 145 × 111 × 180 cm Print system: Dual independent print-heads Technology: GDP – UV-cured gel deposition Support requirements: Reduced Maximum part height: 180 cm Machine weight: approx. 3,000 kg Electrical connection: Three-phase Material compatibility: Dimengel 90, Dimengel 100, Dimengel 300 Transparent Material tank capacity: 19 L Condition: Professionally refurbished Functionality: Fully functional, testable under power REFURBISHMENT DETAILS - Dispensers refurbished with new stators, bearings, and couplings - Hydraulic pump refurbished with a new stator - Gel filtration system refurbished with new filters installed - UV curing modules tested and calibrated - XYZ belts tensioned and full table alignment performed - Complete system functionality refurbished and verified before sale PRICE 95,000 EUR (excl. VAT)

Condition: ready for operation (used), Year of construction: 2021, total height: 1,950 mm, overall weight: 350 kg, number of axes: 3, General Data Measurements width 940 mm Measurements depth 900 mm Gedpjx D Sqmefx Aadetu Measurements height 1950 mm Machine weight 350 kg Main Drive Number of axis 3 Additional Equipment Double extrusion head per print module, equipped with a cleaning system for the print head to print complex geometry with soluble support. 3 print modules with different temperature specifications specially developed for the different materials. This 3-axis 3DGence Industry F420 was manufactured in 2021, featuring Fused Filament Fabrication with a dual extrusion head and a cleaning system for complex geometries. It includes three print modules for various materials, a 380 × 380 × 420 mm working chamber, and temperatures up to 500°C for the print head. If you are looking to get high-quality 3D printing capabilities, consider the 3DGence Industry F420 machine we have for sale. Contact us for more information about this machine. Application Types 3D Printing

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 140L-C, Year of construction: 2022, operating hours: 5,854 h, total length: 1,450 mm, total height: 1,040 mm, total width: 1,250 mm, type of input current: AC, overall weight: 380 kg, input voltage: 400 V, input current: 12 A, input frequency: 50 Hz, ambient temperature (min.): 10 °C, ambient temperature (max.): 40 °C, electrical fuse: 16 A, table width: 500 mm, tank capacity: 140 l, table length: 700 mm, power: 8.3 kW (11.28 HP), travel speed (max.): 24,000 mm/min, number of print heads: 2, Refurbished Industrial Fused Filament Fabrication (FFF) Printer Includes: - 140L-C printer - Vibration-damped platform - License for slicing software (Simplify3D) Original price €73,800 Gsdsxuh Nyspfx Aadetu General Technical Data: Model: HAGE 3D-140L-C Year of manufacture: 2022 Operating hours: 5,854 h Printing technology: FFF (Fused Filament Fabrication) Filament diameter: 1.75 mm; open material system (not limited to specific manufacturers) Build area (L x W): 700 mm x 500 mm Maximum print height: 400 mm Maximum build volume: 140,000 cm³ Dimensions and Weight: Length: 1,450 mm Width: 1,250 mm Height: approx. 1,040 mm Weight: approx. 380 kg Temperature: Maximum printhead surface temperature: 300°C (optionally 450°C) Maximum build plate surface temperature: 180°C Maximum chamber temperature: 85°C Minimum operating temperature: +10°C Maximum operating temperature (ambient): +40°C Electrical Data: AC input: 400 V / 50 Hz Power supply: 24 V DC Connection: USB 3.0 / Ethernet Print Specifications: X-axis speed: up to 400 mm/s Y-axis speed: up to 400 mm/s Z-axis speed: up to 300 mm/min XY-plane print accuracy: < 0.1 mm Printer Control: Industrial controller (Sigmatek) Software: HAGE3D All documentation available Platform: 1,450 x 1,250 x 600 mm (LxWxH) Including storage compartments Including machine feet with vibration damping

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, working width: 4,800 mm, Machinery Description Document “Bendazzoli NBB186/48 CE” Serial No.: 582 Corrugated Cardboard Packaging Production Machine 1. General Description: - Machine Name: Printer Slotter - Machine Type: NBB186-48 - Manufacturer: Bendazzoli Costruzioni Meccaniche - Year of Manufacture: 2001 - Year of Mechanical Overhaul: 2025 • Slotter fully overhauled • Partial Print Unit overhaul (new anilox and rubber rollers, new compensator, new bearings, new lubrication pump, refurbished ink pump) • Partial Feeder overhaul (new feeding wheels, new lubrication pump, main drive motor fully refurbished by CEAR, new CAM bearing) • Static Group fully overhauled • Complete sandblasting and repainting of all machine sections - Year of Partial Electrical Overhaul: 2025 Includes replacement of sensors / push-buttons / on-board wiring / solenoid valves / electrical control panels (machine groups). Godpfx Aasyifdvedotu 2. Technical Specifications: - Dimensions: Machine length 4800 mm; Cylinder Circumference 1860 mm - Speed: Maximum rotation 5,500 RPM under optimal conditions - Minimum center distance (shafts): 450 mm - Sound Pressure Level (infeed section): 85 dB (A) - Sound Pressure Level (outfeed section): 82 dB (A) - Electrical Specifications: Power supply 400Vac 3-Phase 3P+PE Rated Power: 70 kW Absorbed Power: 57 kW Rated Current: 102 A Operating Current: 82 A - Production Speed: approx. 5,000 boxes/hour in synchro mode; approx. 2,500 boxes/hour in extended mode 3. Main Components: - Cronofit Feeder Table with automatic lateral side guide and batch stop positioning - Print Unit with automatic print preset - Slotter Unit with automatic extension and preset (knife heads) and box height - Static Group 4. Safety: - The machine is equipped with safety guards on moving parts and is fitted with sensors to detect the opening of these guards. - Each machine section is equipped with an Emergency Mushroom Button and a Cable Pull Switch to stop machine movement. 5. Electrical Equipment: - Main electrical cabinet housing control and distribution components - Control console/desk complete with operator touch screen panel 6. Components Not Included for Future Installation: - Cable tray and related accessories - Command and power cables between cabinet/console/machine units - Network bus cables Note: Possible purchase of Die Cutter and Stacker year 2008 (to be overhauled).

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 50 h, total length: 1,000 mm, total height: 500 mm, total width: 500 mm, type of input current: AC, overall weight: 550 kg, temperature: 280 °C, ambient temperature (min.): 15 °C, ambient temperature (max.): 28 °C, positioning accuracy: 0.1 mm, wall thickness: 1 mm, space requirement length: 2,715 mm, space requirement height: 2,765 mm, space requirement width: 2,170 mm, High-performance materials: Best-in-class print heads With its nozzles, the STUDIO G2 is ready for printing with fiber-reinforced and other industrial-grade materials at maximum speed and precision. The specially designed extruder achieves a high level of detail with layer thicknesses as low as 0.1 mm on objects up to one meter long. This allows for more options for perfecting a part's mechanical properties. Optimal printing temperatures: The temperature-controlled build chamber The STUDIO G2's enclosed, temperature-controlled print chamber creates perfect conditions for printing with industrial-grade materials. The transparent doors allow users to visually monitor the printing process with safe and easy access to the print bed. User-friendly features such as automatic pausing when the housing is opened ensure a smooth and safe printing process. Independent Temperature Control: Heated Filament Chambers The STUDIO G2's integrated heated filament chambers ensure that the printing materials remain dry in a constantly controlled environment, guaranteeing print quality unmatched in this class. The filament chamber exceeds industry standards by offering temperature control independent of the print room. Optimal Print Temperatures: Fast-Heating Print Bed Low setup time thanks to a fast-heating print bed. Increased bed temperature up to 100°C improves adhesion for a wider range of materials. New inductive sensor for fast, precise semi-automatic bed leveling. Gtjdpjwgbcyefx Aadou Simple & Intuitive: The New Slicer The user-friendly BigRep "BLADE" slicing software allows for greater control over printing parameters and offers presets for all BigRep-compatible materials, enabling a quick, hassle-free start to print. BLADE is one of the fastest and most precise slicers on the market, specifically optimized for large-format printing. Large enough for every idea: The large print area Create space for innovation with the STUDIO G2's large 500 mm x 1000 mm x 500 mm print area, packed into a compact housing and with features optimized for fast, high-resolution printing of large-format, industrial-grade parts.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 200 h, The system is located in the BIBUS Austria Democenter and can be inspected and tested at any time. The device can process a total of 14 materials - in addition to common plastics such as ABS, PLA, TPU and Carbon PA, high-performance polymers such as Ultem, Peek, CarbonPeek and Helios-Peek are also available. Four material-dryer are included in the delivery, Gtedsibikwjpfx Aadou Payment terms: Cash in advance, excluding transport and commissioning - these costs are charged depending on the location.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, operating hours: 200 h, total length: 2,128 mm, total width: 1,294 mm, input voltage: 400 V, warranty duration: 6 months, input current: 32 A, laser power: 100 W, tank capacity: 32 l, volume flow: 20 m³/h, Polyamide laser sintering system including two interchangeable containers and unpacking station. The machine can be inspected and tested at any time at the BIBUS Austria demonstration center. Furthermore, the system features a quick-change mechanism between recoating blade and coater roller – the system is always up to date with the latest technology due to continuous upgrades. Gtsdpfxeqwkype Aadju

Condition: not inspected (used), Dear Sir or Madam We hereby offer you the following device for sale: Keyence Agilista 3200W 3D printer. The machine is sold with the equipment documented in the photos and recorded in the advert text. Location: 40764 Langenfeld ATTENTION: The device comes from an insolvency. We are auctioning it for the highest bid on behalf of the creditor/bank. This is a closed auction. We do not give any information about the current highest bid. Your bid becomes binding upon receipt by e-mail. Please inform us of your binding bid by 07.12.2025 at 10 am. You will be informed of the outcome of the auction within 72 hours of the end of the auction. Gjdjwktwkjpfx Aadetu

Condition: excellent (used), Offer for flexo printing machine W&H SOLOFLEX, 8 colors, year 1998, 620 mm width, can be seen in operation in excellent condition Gjdpfxsygg Uyj Aadjtu

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, operating hours: 3,300 h, No reserve price – guaranteed sale to the highest bidder! Auction of a complete additive manufacturing production facility comprising several metal printers, sintering and washing units, as well as additional composite printers! The offering includes the following components: 3 Metal X 1 Sinter II 1 LMI Washing Unit 1 Mark Two Plastic Printer 1 OnyxOne Plastic Printer Godpfx Aajyc Ub Tjdotu MACHINE DETAILS Operating hours: 3,300 h EQUIPMENT - Regularly serviced and maintained - Intuitive operation via touch displays - Software for print preparation and completion - Processing of a wide range of metal materials - Complete solution from design to finished component - Easy integration into existing setups

Condition: excellent (used), Kortho GraphicJet 18P InkJet printing system High-resolution inkjet printer with many possibilities. For coding and marking absorbent materials such as folding boxes, trays, bags, sacks or individual products up to 8 lines plus graphics and barcodes. Gtedpfeq Tp Srsx Aadou Character height from 1.5 to 18 mm Product benefits at a glance * High-resolution inkjet printing: 128 individually addressable dots per print head. * Completely free print image design within the text area. * Combination of text, logos and barcodes in one print image. * Kortho Image Generating Software for logical print image creation on the pc. * Unique infrared remote control: no cable connection required. * Separate, refillable ink tank with industry-standard volume. * Clean, easy ink refill during operation. * Very low cost per print. Print costs can be calculated by program. * Maintenance reduced to a minimum. * No flushing with solvent required. The advantages of the Kortho GraphicJet 18P The compact print head and the separate ink tank, in conjunction with a variable standard mounting bracket, enable operation at almost any position in the production process. Regardless of whether a carton is to be labeled from above or a tray or paper bag from the side. A print image with a format of up to 18 x 500 mm can be designed completely freely for each print head. A print image can contain texts of up to eight lines, logos, time, date, barcodes, batch numbers and shift codes in different display variants. The font height that can be displayed is 1.5 mm to 18 mm per line. Texts and graphic elements can appear both horizontally and vertically in a printed image. Automatic numbering Lot numbers, batch numbering, pallet numbering and other variables in different versions. Several number codes are possible in one print image. Automatic date coding Best-before date, production date and other variables in different versions, such as day of the year, day of the week, week of the year, in Arabic format. Several number codes are possible in one print image. A date can also be entered by the operator directly on the control unit. Automatic time coding The time is taken from the control unit's clock chip. Different versions of the display are possible. Several time codes can appear in one print image. Automatic shift codes Up to 25 shift codes can be defined over a maximum of 7 days. Several shift codes are possible in one print image. Graphic images Logos can be imported as black and white bitmaps via the KIGS software. Several images are possible within one print image (depending on the format size). Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: excellent (used), Kortho Graphicjet X-18 inkjet printer High-resolution inkjet printer for absorbent and smooth surfaces The most advanced hi-res inkjet for 18mm high prints Launched in 2015, the X-Series Graphicjets are Kortho's latest and most advanced hi-res inkjet printers. Machine-wise, the X-Series printers with their capillary ink system are a further development of our proven 18P. However, the X-Series printers have a Windows operating system. In addition, its Nicelabel Windows driver makes it possible for this printer to print directly from any Windows software or ERP system. The X-Series has an 8″ color touch screen with integrated label management and design functions. This eliminates the need for external devices or connections during standalone operation. Additionally, this printer can print at speeds of up to 60 meters per minute, up to 120 m/min at lower resolution. Features of the Kortho Graphicjet X-18 Inkjet Print area of 18 x 1000 mm Resolution of 185 DPI Print speed of up to 60 meters per minute (at full resolution), up to 120 m/min at lower resolution Coding on cardboard (boxes), paper and many other absorbent materials A compact print head housing and 60 cm supply cable ensure easy installation Its non-pressurized capillary ink system ensures that this printer is not affected by changing environmental conditions Oil-based inks and mineral oil-free inks available User-friendly 20 cm TFT touch screen in any language you want Starts up within seconds Extensive graphics, text and barcode functions Windows-based operating system Equipped with Windows driver for network integration Equipped with Ethernet connection and USB ports 100% NiceLabel compatible On-screen label design and management software (no external device required) Low consumption costs and low maintenance Longest service life and reliability on the market Made from the best materials (such as stainless steel) Serialization option via variable printing and bidirectional communication with ERP system Gtjdpfetpwt Iex Aadeu CE certified Further articles in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: excellent (used), Bluhm Systeme Markoprint Integra One Printing System Markoprint Integra One with HP cartridge technology. With its compact dimensions of 188 x 80 x 98 mm, the system can be easily installed in or on production lines. The printhead achieves top speeds of more than 180 m/min and has an IP65 protection rating. The printing system is equipped with a display for data entry, as well as for changing and reviewing system settings. Operators can review or change variable print information and settings directly on-site using the user-friendly display. Intuitive control is via an i-Logic button. Maintenance status can also be displayed on the display. The Integra One is particularly compact, measuring 188 x 80 x 98 mm, and was specifically designed for system integration. Smart Cartridge Monitoring The intelligent SmartCard cartridge monitoring system identifies the current ink type and automatically sets the appropriate ink parameters. The chip records and stores the current ink level and therefore detects opened cartridges. Thanks to the Click'n Print cartridge holder, changing ink is quick and easy. Maximum print speed (300 dpi horizontal) up to 180 m/min depending on configuration Horizontal print resolution adjustable from 50 to 900 dpi Vertical print resolution 300 or 600 dpi depending on configuration Maximum print height 12.5 mm Technology HP MK3 Authentication SmartCard Text field yes Gsdjq Tp Rmepfx Aadetu Counter yes (depending on configuration) Time yes (depending on configuration) Date field/date offset yes (depending on configuration) Logo yes Variable input yes (depending on configuration) Action fields yes (depending on configuration) 1D code/2D code yes (depending on configuration) Data transfer via USB stick yes (USB-C) Ethernet yes (depending on configuration) Wi-Fi optional EIA232 yes Password levels yes (depending on configuration) Configurable inputs and outputs yes (depending on configuration) You can find more items - new and used - in our shop! International shipping costs on request!

Condition: used, Year of construction: 2014, efi Vutek GS 3250 LXpro LED Print width: 3.2 m Colors: 8C + White Resolution: 12pl-1000dpi Production speed: up to 224 m²/h Roll option: Gedox R U Evjpfx Aadotu 2 tables efi Fiery server Optional: heavy-duty unwinder

Condition: excellent (used), Dr. Hönle Dr. Hönle UV Technology – Bluepoint LED High-Power + Bluepoint 2 easycure – Complete System incl. LED Spots & Manuals For sale is a complete UV curing system by Dr. Hönle, consisting of two control units and several LED spots. Ideal for professional applications in electronics manufacturing, medical technology, optics, plastics processing, and laboratory operations. Description: The system includes: - Bluepoint LED High-Power Control Unit (REF 45250.c) - Bluepoint 2 easycure Control Unit (REF 33900.a) - Several UV LED spots (e.g., 365 nm, air-cooled) - BP-LED 4-1 Adapter (REF 45970.a) – for controlling up to 4 spots - Original operating manuals + CD Gtjdpfxsx E T Uxe Aadeu The units enable precise control of exposure time, intensity, and energy – ideal for reproducible industrial UV curing processes. Technical Data: Bluepoint LED High-Power (45250.c): - Power supply: 36 V / 5.5 A - Control for up to 4 LED spots - Adjustable UV intensity - Timing programs and energy measurement Bluepoint 2 easycure (33900.a): - 230 V AC, 50 Hz - 570 VA power consumption - High-performance LED control - Industrial quality, Made in Germany Total Dimensions/Weight: approx. 12–15 kg Important Note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see photo) - Bluepoint LED High-Power - Bluepoint 2 easycure - LED spots (air-cooled) - BP-LED 4-1 adapter - Operating manuals - CD - Original documentation (subject to changes and errors in technical data and information!) We are happy to answer further questions by phone.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 031223510029, Year of construction: 2024, operating hours: 573 h, total length: 650 mm, total height: 1,200 mm, total width: 610 mm, type of input current: AC, overall weight: 145 kg, input voltage: 230 V, input current: 8 A, For sale: A virtually unused SINTERIT Lisa X SLS 3D printer, operated for only 573 hours. The set includes: - Sinterit LISA X 3D Printer - Sinterit Studio Advanced ("slicer") - Flight Case for LISA X Technical Advantages: Exceptionally fast printing, with speeds of 10-14 mm/h, allowing a full bed with complex shapes to be printed in just 34 hours. Larger build volume with a bed size of 180 x 130 x 330 mm. Wide range of materials, from highly durable and flexible options to specialized materials like ESD powder. High print quality with fine details. Open environment with over 50 adjustable printing parameters, enabling flexible management and the use of external materials. Gtjdowi Sivjpfx Aadeu We Offer: Option for personal handover in the Czech Republic or professional shipping internationally. 14-day money-back guarantee and the possibility of a test print. 500 EUR discount for quick closure within 7 days. Contact us for more details or to arrange a viewing!

Condition: used, Hardness testing device, hardness measuring machine, hardness tester, hardness tester -Hardness tester: according to Brinell and Rockwell Accessories are missing and therefore it is sold as defective. Godpfx Asb A Rkveadjtu -Handover in its current condition as inspected -Dimensions: 600/220/H660 mm -Weight: 92 kg

Year of construction: 2026, condition: new, new PMH filament line Gtedpech Sfqjfx Aadou extruder 30 mm - 28 l/d with noozle for 3D-filament with cooling tank with blow-up system for adhesive water with Laser control system (option) with puller with filament accumulator (option) with winder and traverse guide MADE in GERMANY