Used Vacuum Crane for sale (8,793)

Condition: used, 800040V1444, TURBOVAC T1600, Oerlikon Leybold turbomolecular pump with frequency converter Model: 800040V1444 Type: TURBOVAC T1600 Fgedpforfxgbox Aggog Condition: Used Note on condition: free of contamination

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, MAN 8x4 Hydrodrive with F1150 Fassi Loading Crane Vehicle description for: TGS 35.520 8x2H-6 BL CH Removable flatbed, Jost fifth wheel coupling, fully enclosed V2A stainless steel Commercial tonnage: 35 t Main wheelbase: 2,980 mm Wheelbase between front axles: 1,795 mm Wheelbase between rear axle and trailing axle: 1,350 mm Exhaust silencer, side-mounted, right Downward exhaust outlet 2 batteries, 12V, 210 Ah, Super Longlife (AGM), maintenance-free, for increased electrical demands 390 l fuel tank capacity, left side 35 l AdBlue tank capacity, right side 1-cylinder air compressor, 360 cc, with economy system Pneumatically regulated air processing Compressed air tanks, steel Electronic Braking System (EBS) Anti-lock Braking System (ABS) Full emergency brake assist Disc brakes on front axle Disc brakes on 2nd front axle Disc brakes on rear axle Disc brakes on trailing axle Emergency brake signal, hazard light activation LED side marker lights MAN D2676 LFAX diesel engine, 382 kW (520 HP) output, 2,650 Nm torque, Euro 6e Heated fuel filter for fuel up to purity class 25 Pre-fuel filter with oil/water separator, water sensor, heated (mixing valve) F1150RA.2.28 L616 winch + 2-person basket (available as an option for an extra charge) Endless slewing range All hydraulic cylinders double-acting Piston rods hard chrome-plated Double linkage system with PROLINK (overbending articulated arm up to 12°) Electronic overload switch-off with FX900 FASSI stability control FSC including LMB II Emergency stop and visual alarm (90% and 100%) Pressure relief and load-holding valves XF System (Extra Fast) + XP System (Extra Power) + FL ? System (Full Lift) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning in the display Danfoss D900 control block with 4 control valves mounted on crane column Emergency operation for crane control High-pressure filter supplied plumbed Separate hydraulic tank (260 l) with filter and oil cooler mounted at crane base Hydraulic outriggers, hydraulically extendable on both sides, support width 8.84m Outriggers operable via radio control with proportional control block IMC System (Integral Machine Control) and ADC (Automatic Dynamic Control) = load-dependent speed control Standard color RAL 3020 traffic red - all cylinders painted black Load hooks and mounting shackles (short / 500mm) Fjdpfx Agewllmaogsgg Transport position: folded transversely to the direction of travel Attention: Observe vehicle voltage / 12V or 24V, standard 24V FASSI Stability Control FSC-S/II IE742 connection box Low-profile subframe 180° hydraulically tiltable outriggers / both sides Control system for auxiliary function "winch / xhe-dynamic" Control system for 2 auxiliary functions with 2 hose guides / xhe-dynamic Prepared for operation with variable displacement pump (LS) Work light operable via display (1 b/w function) 1 LED work light mounted on articulated arm LED for 2 outriggers, not mounted (crane) LED for 2 outriggers, not mounted (additional support beams) GR.15 electrical rotary distributor with 15 slip rings FUNK-V7-RCS V7 RCS radio remote control Fassi radio remote control V7S: Available with 6 or 8 functions with linear levers or joysticks. V7S with 4.3" color display / 24bit - 480 x 272 px, with 8 push buttons Engine start/stop, engine speed +/-, 6x ON/OFF functions, 10m cable and various operating speed settings, including spare battery, charger, neck and waist belt.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2001, machine/vehicle number: 2001.06.846, overall weight: 4,800 kg, total length: 20,200 mm, total width: 2,830 mm, load capacity: 5,000 kg, working height: 6,000 mm, operating hours: 5,670 h, Equipment: documentation/manual, Verlinde 5,000 KG single-girder overhead crane in very good condition, complete with crane manual. - Span: 20,000 mm center-to-center. - Lifting capacity: 5,000 KG - Lifting height: 6 m - Year of manufacture: 2001 Delivery, customization, installation, inspection, and commissioning are all possible upon consultation. If this crane is not exactly what you are looking for, we have more than 100 cranes and over 3,000 m² of parts in stock. Not all stock is listed online. Please call or email if you have any questions. We sell, among other things: - Overhead cranes - Underslung cranes - Column and jib cranes - Chain hoists - Demag KBK rails and accessories - Traveling power feeds Keywords: overhead crane, gantry crane, Abus, Demag, Kone, Konecranes, Stahl Fodpfsy Uxfusx Aggsgg

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, load capacity: 20,000 kg, DCB bridge crane, 20 tons. Year of manufacture: 2003. Span: 21,100 mm. Verlinde wire rope hoists. Fodpfx Agjzzkguogegg Power supply: 3 x 400 V. Price excludes dismantling. Dismantling and transport can be arranged.

Condition: excellent (used), functionality: fully functional, volume flow: 170 m³/h, Industrial 2-cylinder pump/compressor unit on a heavy-duty steel frame, protected for transport and storage. Driven by a large three-phase motor (see photo). Suitable as a transfer pump, compressor, or vacuum pump – please check the exact design on-site (type plate visible on the motor). Also available are large stainless steel pipelines with flanges and a filter basket (see photos) – the corresponding suction or drainage set can be sold separately. Prices: - Pump unit alone: EUR 6,000 net, negotiable - Complete package: EUR 7,000 net, negotiable Technical data: Pump unit: - Design: 2-cylinder transfer pump - Drive: Three-phase 400 V (large motor, see photo) - Frame: Steel transport frame with anchoring points - Connection: Flange, approx. DN 80-100 Tank/suction pipe set: - Material: Stainless steel (suction pipes, flanges, filter basket) - Length: approx. 2-3 m per part - Application: e.g., pump sump, suction basket for containers Collection/transport: Fjdezab Dpjpfx Aggsgg Self-collection with forklift/crane. Shipping by freight forwarder by arrangement.

Condition: used, 800040V1444, TURBOVAC T1600, Oerlikon Leybold turbomolecular pump Model: 800040V1444 Type: TURBOVAC T1600 Condition: Used Note on condition: Fjdporf U Trjfx Aggogg free of contamination

Condition: excellent (used), functionality: fully functional, Pfeiffer Vacuum GmbH Turbomolecular Vacuum Pump, PM P02 420 C, TMH 520 Model: PMP02420C Type: TMH520 Fgjdjxpu Sqjpfx Aggjg Condition: Used

Condition: good (used), functionality: fully functional, Pfeiffer Vacuum Technology AG Turbo Molecular Pump with MAGPOWER Controller, Q2662100, ATH 2300M Model: Q2662100 Type: ATH2300M Condition: Used Technical Data: ATH-M 200–240V AC 50/60Hz General: Magnetically levitated turbo molecular pump Water cooling Magnetic bearing (Maglev), oil-free Speed: 39,000 min⁻¹ Pumping speed N₂: approx. 1,600 l/s Ultimate pressure: < 6 × 10⁻⁹ mbar Motor: 40 Vrms, 1033 Hz, 12 Arms Inlet flange: DN200 ISO-F Outlet flange: DN 40 ISO-KF External electronics (Magpower) Adixen by Pfeiffer Vacuum Controller MAGPOWER S12A P/N: 120917 Rev. G Vi: V2.10.00 / Vn: V2.08.00 Vv: V2.10.00 Vm: V3.11 Fgsdpfx Agezh I I Negeg Accessories: Pfeiffer/Adixen pump cable A215300 - Pump-2-MAGPOWER cable for connection between turbo molecular pumps and control units Power cord: Hubbell HBL4770C (NEMA L7-15P, 277 V / 15 A) Remote control / I/O cable (DB25) Note on item condition: Gases passed: NF₃/N₂

Condition: used, Year of construction: 2001, functionality: fully functional, Machine Data • Gantry system with fixed table and moving portal for minimal footprint • Base, bridge, and bridge columns made from steel, welded in one piece, stress-relieved and machined • Main machine assemblies are ribbed welded constructions, optimized for the best stiffness-to-weight ratio, vibration damping, and high acceleration • Each machine design is verified and optimized via finite element analysis (FEA) to ensure maximum quality, performance, and safety • Easily accessible machine table for straightforward loading and unloading with forklift or overhead crane • Ground precision linear guides with high preload and additional cover bands for optimal chip removal on all axes • Brushless digital A/C servo motors and controllers on all axes • Dual-sided, synchronized drive on the X-axis (gantry drive) • Rack and pinion drive on X and Y axes • Precision ball screws with double pillow block support on the Z-axis • Precision planetary gearboxes with low backlash • Fully enclosed cable drag chains protect cable harnesses from chips and dust • High-quality shielded cable drag chain wiring ensures superior protection against faults and failures • X-axis working area: 1,540 mm • Y-axis working area: 1,540 mm • Z-axis clearance: 150 mm • Z-axis travel: 200 mm • Network connection via Ethernet • Remote maintenance via Internet FlexiCAM Control • DIN-ISO 66025 G-code compatible • Includes TCP/IP network interface • 256 MB RAM Fjdpfxox E Ttbe Aggegg • Simple operation via handheld control unit with display Spindle with Manual Tool Change • Power consumption: 2.2 kW • 5,000–24,000 rpm, steplessly programmable • Cooling by integrated electric fan Extraction System for Manual Tool Change • Hose connection diameter: 80–90 mm FlexiCAM Midrange Vacuum Table (Side Channel Blower) • T-slot profiles, individual ball valves, 6 zones • Side channel blower: 7.5 / 9 kW • Approx. 558 m³/h (50 Hz) or 654 m³/h (60 Hz) Safety Devices • CE-compliant to DIN EN 13849 • Includes EMC filter, emergency stop • Light barrier system controlled by machine controller

Condition: excellent (used), I sell the pump FEZER 016-118 94213 - Pump in bdb condition. Fedpfoud Ryrsx Aggegg - Capacity 16m3/H

Condition: good (used), functionality: fully functional, gearing type: hydrostat, fuel type: gasoline, fuel tank capacity: 25 l, overall weight: 3,500 kg, empty load weight: 3,500 kg, axle configuration: 2 axles, suspension: parabolic leaf (spring), Year of construction: 2008, operating hours: 3,000 h, roofing crane, type AHK30/1600, equipped with a pallet hook, tipping bucket, and panel hook. Fodpfxezu Au Rj Aggegg

Condition: used, fuel type: diesel, color: red, Year of construction: 1980, operating hours: 7,373 h, General information Year of manufacture: 1980 Serial number: 42350 Technical information Number of cylinders: 6 Drive: Wheel Weights Empty weight: 24.000 kg Carrying capacity: 15.000 kg Fodpfxezwwius Aggsgg GVW: 39.000 kg Functional Mast length: 22 m Lifting capacity: 15.000 kg Condition General condition: average Technical condition: average Visual appearance: average Damages: none Product safety Manufacturer: Coles GB Other information Track width: 2980 mm Additional information Please contact Ernst van Hek for more information Coles Husky 615 Rough Terrain Crane (1980) Hours: 7,373 hrs | Operating Weight: 24,000 kg Lifting Capacity: Max 15T | Max Lifting Height: 22m Engine: DEUTZ F6L 912 Transmission: CLARK powershift Condition: Classic, robust rough terrain crane, well-maintained!

Condition: good (used), 1 x Super vac vacuum packer. Fgjdezq Ehxjpfx Aggeg Model GK 402 B

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 5,000 l, usable tank capacity: 5,000 l, total height: 3,225 mm, outer diameter: 1,756 mm, overall weight: 1,640 kg, wall material: stainless steel, wall thickness: 8 mm, wall structure: single-walled, manhole diameter: 610 mm, manhole location: top, operating temperature: 100 °C, negative pressure: 100,000 Pa, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel agitated pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 8mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates and load cell arrangement, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP. Material: 316L Stainless Steel throughout. Working Volume: 5,000 Litres. Shell ID: 1,740mm. Overall Height: 3,225mm. Shell & Dish Wall Thickness: 8mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 1,640kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Numbers: PXL19635-1, PXL19635-2, PXL19635-3. Factory Tested: September 2020. Fitted with SEW-Eurodrive geared agitator with double mechanical seal, seal pressure pot, and reinforced agitator mounting. Nozzles and fittings include 610mm hinged manway, CIP inlet with dip pipe and TOD clip-on spray fitting, pressure relief valve connection, nitrogen blanketing connection with pressure indicator, Endress & Hauser hygienic thermowell, dual flush polished level switches, load cell arrangement on support legs, lifting lugs, and earthing boss. Fgsdpfx Agozhnlzjgeg Three units currently available, all brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Condition: new, carrying capacity 1000 kg number of suction cups 8 suction cup dia. 280 mm Vacuum lifter VH 8-1000 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 4x galvanized crossbeams with a length of 1,000 mm - 8x Springy, articulated and adjustable suction cup holders - 8x suction cups Ø 280 mm, in case of wear the seal can be separated whose metal supports can be changed inexpensively and without tools - 8x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: * with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. * is routed to the lifting device next to the load chain. - Low-maintenance, very high-quality, oil-lubricated rotary vane vacuum pump with a Suction power of 21 m³/h and an ultimate vacuum of 98% (20 mbar). - Electrical connection: 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). Integrated into the control with isolating transformer Fodpfxjnlb Rzo Aggogg (necessary if the vacuum lifter is connected via the crane trolley and this has no neutral conductor) - Operating handle can be extended to 1,000 mm from the center of the traverse. Sturdy sheet metal bag for your crane control incl. at no extra charge. - Operation "suction / release" using manual slide valve: The wear-free and very robust manual slide valve ensures safe Suction and release after pressing the release button. (twice loosening according to EN 13155) - Control and safety device for vacuum lifters: * Robust control box. * Contactor circuit for the vacuum pump. * Safety warning device with audible alarm. * Vacuum gauge with danger zone indicator. * Large vacuum storage tank with safety check valve * Double actuation when releasing the load. - Fine dust filter to protect the vacuum pump - Detailed and easy to understand documentation. One year warranty against material and manufacturing defects One-shift operation (without wearing parts). Initial test UVV 18, VBG 9a with CE declaration of conformity - according to EN 13155 - Packing for truck transport.

Condition: new, carrying capacity 250 kg number of suction cups 6 suction cup dia. 215 mm Fodjnlb Rwspfx Aggogg Vacuum lifter VH 6-250 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm - 6x Springy, articulating and adjustable suction cup holders - 6x suction cups Ø 215 mm, the seal can be separated in case of wear whose metal supports can be changed inexpensively and without tools - 6x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: * with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. * is routed to the lifting device next to the load chain. - Low-maintenance, very high-quality, dry-running rotary vane vacuum pump a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - Electrical connection: 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). Integrated into the control with isolating transformer (necessary if the vacuum lifter is connected via the crane trolley and this has no neutral conductor) - Operating handle can be extended to 1,000 mm from the center of the traverse. Sturdy sheet metal bag for your crane control incl. at no extra charge. - Operation "suction / release" using manual slide valve: The wear-free and very robust manual slide valve ensures safe Suction and release after pressing the release button. (twice loosening according to EN 13155) - Control and safety device for vacuum lifters: * Robust control box. * Contactor circuit for the vacuum pump. * Safety warning device with audible alarm. * Vacuum gauge with danger zone indicator. * Large vacuum storage tank with safety check valve * Double actuation when releasing the load. - Fine dust filter to protect the vacuum pump - Detailed and easy to understand documentation. One year warranty against material and manufacturing defects One-shift operation (without wearing parts). Initial test UVV 18, VBG 9a with CE declaration of conformity - according to EN 13155 - Packing for truck transport.

Condition: new, carrying capacity 500 kg number of suction cups 6 suction cup dia. 215 mm Vacuum lifter VH 6-500 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm - 6x Springy, articulating and adjustable suction cup holders - 6x suction cups Ø 215 mm, the seal can be separated in case of wear Fgsdpfx Agoq Sc Auogjg whose metal supports can be changed inexpensively and without tools - 6x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: * with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. * is routed to the lifting device next to the load chain. - Low-maintenance, very high-quality, dry-running rotary vane vacuum pump a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - Electrical connection: 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). Integrated into the control with isolating transformer (necessary if the vacuum lifter is connected via the crane trolley and this has no neutral conductor) - Operating handle can be extended to 1,000 mm from the center of the traverse. Sturdy sheet metal bag for your crane control incl. at no extra charge. - Operation "suction / release" using manual slide valve: The wear-free and very robust manual slide valve ensures safe Suction and release after pressing the release button. (twice loosening according to EN 13155) - Control and safety device for vacuum lifters: * Robust control box. * Contactor circuit for the vacuum pump. * Safety warning device with audible alarm. * Vacuum gauge with danger zone indicator. * Large vacuum storage tank with safety check valve * Double actuation when releasing the load. - Fine dust filter to protect the vacuum pump - Detailed and easy to understand documentation. One year warranty against material and manufacturing defects One-shift operation (without wearing parts). Initial test UVV 18, VBG 9a with CE declaration of conformity - according to EN 13155 - Packing for truck transport.

Condition: not inspected (used), Year of construction: 2022, load capacity: 2,000 kg, Mobile Portal Crane ABUS LPK IF INTERESTED, FURTHER IDENTICAL CRANES ARE AVAILABLE! Year of Manufacture: 2022 Machine Number: 153-002730 Condition: Uninspected Fgjdezqfn Eopfx Aggjg Delivery Terms: Free loading onto truck Location: 21493 Elmenhorst-Lanken Availability: Immediately - by arrangement Payment Terms: Prepayment - by bank transfer Internal No.: 174-2 Technical Data: Crane bridge / crossbeam: approx. 3,280 mm Crane bridge profile height: approx. 240 mm Length of longitudinal beams: approx. 4,600 mm Length of running/foot beams: approx. 1,980 mm Height of running/foot beams incl. rollers: approx. 400 mm Lifting Gear: ABUS Electric Chain Hoist Type: GM 6 2000.3-2 Load capacity: 2,000 kg Lifting speed: 0.80 / 3.00 m/min Power supply: 400 V / 50 Hz Equipment: Electrically driven chain hoist / load hook (left/right) IF INTERESTED, FURTHER IDENTICAL CRANES ARE AVAILABLE! Scope of delivery: Existing documentation as shown in the images Dimensions & Weights: Installation dimensions L x W x H approx.: 3600 x 2000 x 5000 mm Transport dimensions L x W x H approx.: 4600 x 1500 x 1500 mm Weight approx.: 500 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional Notes: ►Upon request, we can offer transport to the destination. ►The quoted price is net, plus VAT. ►The goods are sold with the exclusion of any warranty. ►Technical data subject to change without notice. ►Subject to prior sale. ❗The sale of the goods is exclusively to business customers❗

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 0-201-08-1422, functionality: fully functional, operating hours: 17,952 h, number of slots in tool magazine: 24, working width: 1,600 mm, spindle motor power: 15 W, number of spindles: 2, working length: 4,760 mm, Machining center with automatic material handling (serial number: 0-205-08-1424) TECHNICAL DETAILS Fodpfxozx Anfo Aggegg Travel in X-axis: approx. 4,760 mm Travel in Y-axis: approx. 1,600 mm Main spindles: 2 Power of main spindles: 15 kW each Tool interface: HSK F63 Number of drilling heads: 2 Tool changer: 2 × 12-position MACHINE DETAILS Control system: PC85 / woodWOP Operating hours CNC: 17,952 h EQUIPMENT Automatic AP console tables Chip and waste disposal Safety enclosure Associated HOMAG handling and return conveyor system Portal handling Vacuum crossbar Conveyor technology C-axes FLEX-5 preparation Automatically positionable vacuum clamps Liquid ring vacuum pumps Note on machine designation: BOF 712/48/16/AP was the actual historical machine type. CENTATEQ E-500 is the later/current model designation, which is now visible on the machine.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 50,000 l, usable tank capacity: 30,000 l, total height: 4,275 mm, inner diameter: 4,000 mm, outer diameter: 4,020 mm, overall weight: 4,250 kg, wall material: stainless steel, wall thickness: 10 mm, operating temperature: 100 °C, Equipment: CE marking, sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 10mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP, excellent condition. Material: 316L Stainless Steel throughout. Working Volume: 30,000 Litres. Shell ID: 4,000mm. Overall Height: 4,275mm. Shell & Dish Wall Thickness: 10mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 4,250kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Number: PXL19785. Factory Tested: July 2021. Nozzles and fittings include 610mm hinged manway with grill, triple CIP sprayball arrangement, inlet connections, vent, pressure relief valve connection, Endress & Hauser hygienic thermowell, dual level switches, level measurement connection, lifting lugs, and earthing boss. Two units currently available, both brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Fedpfx Agezhn Rqegogg Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Condition: good (used), mileage: 611 km, color: orange, lifting height: 6,500 mm, Year of construction: 2006, operating hours: 4,225 h, CE mark: yes Technical condition: good Visual appearance: good Delivery terms: EXW Production country: DE Please contact Vink Machinery for more information Boki Kiefer HY1251 with Palfinger PK 2700 A * 2006 * Diesel Fgodpfozmfv Uox Aggog * 4225 working hours * 611 kilometers * 6.5 meters hook height * 5 meters horizontal range * Load moment 2.6 tons/m * 2370 kg own weight * equipped with tipper body * including crane book and other documents

Condition: new, mileage: 500 km, power: 405 kW (550.65 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Volvo FH 540 8x2 with EFFER Crane Truck: • FH 8x2R NLA air suspension • Application cycle: Long-distance transport • Predominantly flat topography • Gross combination weight, technical: 60 t (observe towing capacity of drawbar coupling!) • Rear-view mirrors for body width 2600 mm Main Components • Chassis height: MED (medium) • Trailing axle, electro-hydraulically steered, single tyres • Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle • Globetrotter safety cab FH • Wheelbase: 4,900 mm • Emissions according to Euro 6, with SCR, particulate filter, and exhaust gas recirculation • Diesel engine 12.8 l, 551 hp/405 kW, 2,652 Nm • Volvo Engine Brake+ (VEB+) (meets ADR braking regulations) • I-Shift AT2612, automated 12-speed gearbox (direct drive), max. input torque: 2,652 Nm • Liftable axle • Rear axle RSS1370C, axle load 13 t, GCW 70 t, differential lock • Drive axle ratio 3.08:1 Chassis • Air suspension on front axle(s) • Lifting on front axle air suspension: Basic (more ground clearance, reduced lift range) • Front axle load max. 20 t (technical) for double front axle • Rear axle load max. 23 t (technical) • First trailing axle 10.0 t • Volvo Dynamic Steering (VDS) including Stability Assist • Disc brakes, solid discs • EBS, Electronic Braking System, Medium package • AGM batteries, 2 x 210 Ah • 275 l fuel tank, left (plastic) • AdBlue tank, usable capacity 57 l (between the front axles) Trailer / Coupling • Rockinger 400 G-150 drawbar coupling (observe D-value/max. trailer load!) • Electrical connection for semi-trailer/trailer, 15-pin (ADR possible) • Duomatic coupling Wheels and Tyres • Dura-Bright EVO aluminium rims (polished) • FA Tyres 385/65R22.5 (Continental Conti Eco HS5, 3PMSF) • DA Tyres 315/80R22.5 (Continental Conti Eco HD5, 3PMSF) • NLA Tyres 385/65R22.5 (Continental Conti Eco HS5, 3PMSF) • Tyre pressure monitoring with internal sensors Crane • Effer E-9 Jib.155Q-6 JDC • JIB • Winch Body • All necessary chassis work for crane installation, including vehicle frame modification. • Compliance with body builder guidelines of the relevant chassis manufacturer for all work. • Complete installation of a specially developed auxiliary frame from high-tensile steel. • Welded and bolted auxiliary frame for high torsional rigidity and optimum stability (unique feature). • Supply/installation of front support legs Fgodpszthh Hsfx Aggeg • Assembly/bolting of the crane and main support, including installation of all hydraulic and electrical connections. • Usable as a tractor unit via removable/sliding Jost fifth wheel (JOST JSK SL), superstructure removable. • Removable flatbed body as high-profile welded steel construction (approx. 4,250 mm x 2,480 mm, A-dimension open). • Flatbed equipment: Container locks, Multisafe/Multifix stanchion pockets and retractable lashing eyes (2,500 daN / 6,500 daN). • Removable aluminium drop sides and rear underrun protection (extendable) incl. additional/front support. Further information on request.

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, volume flow: 300 m³/h, input voltage: 400 V, input frequency: 50 Hz, Vacuum pump PVR EU 300B PVR vacuum pump Type EU 300B Capacity 300 m³/h Absolute pressure 10 mbar Year of manufacture 2004 Price € 3500 Fsdpezwu R Ajfx Aggsgg

Condition: good (used), functionality: fully functional, axle configuration: 2 axles, first registration: 07/1992, Year of construction: 1992, Equipment: crane, hydraulics, For sale is a robust tandem crane trailer with a HIAB loading crane, type 205-4. The crane was manufactured in 1992 and, despite its age, is in good and functional condition. The crane trailer has only been used sparingly in recent years and is therefore being sold due to lack of use. An inspection and functional test on-site are possible by arrangement. The equipment includes a winch, grapple, remote control with charger, and concrete counterweights. The crane has several hydraulic extensions and hydraulic outriggers. Thanks to its large reach, this combination is suitable for various tasks in agriculture, forestry, construction, and transport. Equipment / Scope of supply: HIAB loading crane, type 205-4 Year of manufacture 1992 Manufacturer's serial number 3183 Several hydraulic extensions 4 hydraulic outriggers Winch Grapple Remote control including charger Concrete counterweights Tandem axle Loading platform with sideboards PTO drive / hydraulic supply Fsdpfx Agezzzy Ejgogg Only the crane trailer with crane and the described accessories is being sold. The tractor shown in the pictures is not included in the offer and will not be sold. The crane trailer shows signs of use and wear corresponding to its age. The tires are partially significantly worn. The condition can be clearly seen in the pictures.

Condition: new, power: 397 kW (539.77 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 4,000 mm, loading space width: 2,480 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Brand new Volvo 8x2 with an F2150RAL Fassi loading crane including fly jib and hydraulic winch Equipment as per building description Chassis: (New model 2024) • Manufacturer/Type: Volvo FH 540 8x2, wheelbase 4900 mm • For detailed vehicle equipment, please refer to the enclosed documents. • Driver’s cab GLOBE • 1 x oil pump type: Sunfub • New MOT / emissions test • Initial inspection, error reading, and parameterization of the vehicle. • If necessary, day registration with all entries. • Light bar • LED brown/brown • LED • Rotating beacons on the roof • Complete control of the warning lighting (heavy transport/tow truck type) Superstructure: • Carrying out all chassis work required for crane installation, disassembly and assembly of attachments, exhaust system, tanks, etc. Adaptation of the vehicle frame. • All chassis and bodywork are carried out in accordance with the installation guidelines of each chassis manufacturer and in the best quality. • Complete assembly of a specially designed and manufactured auxiliary frame made from fine-grained steel for crane and body. The auxiliary frame, welded and bolted to the vehicle chassis frame, guarantees extremely high torsional rigidity and perfect stability of the crane vehicle. The unique feature is the design of the auxiliary frame. Produced to the highest quality and painted in an RAL colour to be specified during order clarification. • Mounting/bolting the crane and main support carrier to the auxiliary frame. Installation of all hydraulic and electrical connections. Installation location: Front • Platform configuration as steel/welded construction, REMOVABLE platform, • Length approx. 4000 mm x width x 2480 mm. • Platform body steel / sandblasted / repainted, • RAL colour to be specified during order clarification. • Detachable aluminium side panels Brand Suer, 400 mm high, anodized version • Standard platform floor with welded steel checker plate, 4 mm, painted. • 8 x retractable lashing eyes per side 2000 daN, flexible profile/arrangement. • 2 x MULTISAFE stake pocket rows per approx 600 mm (per side) • 2 x retractable lashing eyes per side 6500 daN • Sturdy front wall made from welded frame, welded-on 4 mm steel plate and 5x accessory hooks, front wall height 1300 mm, steel finish/repainted. • Trim panels, mudguards, version aluminium checker plate, sandblasted, powder-coated and painted. RAL colour to be specified during order clarification. • 3 pcs. toolboxes, version aluminium checker plate, sandblasted, powder-coated and painted. Size and arrangement depend on wheelbase or available space. Mounting of underride protection at the rear and additional support, with installation of all hydraulic and electrical connections. Arrangement of sockets/pneumatics • 2x container locks in front of the front wall • Company FASSI is a renowned Italian crane manufacturer that has been developing, manufacturing and marketing loading cranes from 1.0 TM to 215 TM worldwide for more than 50 years. • New crane type FASSI F2150RAL 2.28RAL, endlessly rotating, fully assembled, installed, and parameterized, with 8 hydraulic extensions on the knuckle boom and Fly-JIB L816L with 6 extensions. • For detailed crane equipment, please refer to the enclosed documents. • Initial inspection and parameterization of the crane are carried out according to the technical regulations and load diagrams of FASSI loading cranes. Fedpey U Auysfx Aggogg Lighting: • 1 x LED AS, each 1x on