Used Vacuum Table for sale (19,699)

Condition: new, table diameter 600 mm table load 0,6 t swivelling range 0 - 90 Grad turning speeds 0,1 - 1,8 U/min max. torque on the faceplate 450 Nm table pass 80 mm welding current 500 Ampere total power requirement 0,18 + 0,18 kW weight of the machine ca. t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). Bjdpefv Awzefx Aiyjww No original pictures. Design but identical.

Condition: new, table diameter 1200 mm table load 1,2 t swivelling range 0 - 120 Grad turning speeds 0,06-0,6 U/min max. torque on the faceplate 2400 Nm table pass 200 mm welding current 500 Ampere total power requirement 0,75 + 1,1 kW weight of the machine ca. 1,0 t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. Bwedpfx Asfv Aw Njiyew • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical.

Condition: new, table diameter 1400 mm table load 2,0 t swivelling range 0 - 135 Grad turning speeds 0,05 - 0,5 U/min max. torque on the faceplate 6000 Nm table pass 200 mm welding current 700 Ampere Bwsdpofv Aw Tjfx Aiyow total power requirement 1,1 + 2,2 kW weight of the machine ca. t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right).

Condition: new, table diameter 2500 mm table load 20,0 t swivelling range 0 - 135 Grad Bedpfxofv Axmj Aiyeww turning speeds 0,04 - 0,4 U/min max. torque on the faceplate 40000 Nm table pass 200 mm welding current 1000 Ampere total power requirement 5,5 + 11,0 kW weight of the machine ca. t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical.

Condition: new, table diameter 690 mm table load 0,5/0,25 t swivelling range 0 - 90 motorisch Grad turning speeds 0,2 - 2,5 U/min spindle bore 100 mm Torque 375 Nm welding current 500 Ampere connected load frequency 230 Volt weight 290 kg Dimensions (LxWxH) 800 x 750 x 750 mm Welding turntable with - Footswitch - tilt motor Bjdpfx Aijfv Aykoysww - Speed continuously adjustable - 500 amps welding current transmission

Condition: new, table diameter 1300 mm table load 3000 Kg swivelling range 0 - 130 Grad turning speeds 0,05 - 0,5 U/min height adjustment 1200 - 1800 mm max. torque on the faceplate 6000 Nm engine output 1,1 / 1,1 kW welding current 700 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a Bwodpfxjfv Ayyj Aiysw footswitch. Welding power transmission for max.500Ampere.

Condition: new, table diameter 780 mm table load 1,0 t swivelling range 0 - 135 Grad Bedpfxsfv Ay Se Aiyjww turning speeds 0,15 - 1,5 U/min table height adjustment von 780 bis 1560 mm max. torque on the faceplate 1000 Nm welding current 500 Ampere including remote control and welding current transmission.

Condition: new, table diameter 1600 mm table load 8 t swivelling range 0 - 130 Grad turning speeds 0,05- 0,5 U/min table height adjustment von 1210 bis 2238 mm Bwedpfxefv Azho Aiyjw max. torque on the faceplate 1200 Nm welding current 700 Ampere including remote control and welding current transmission.

Condition: new, table length 1200 mm table width 1200 mm table height 850 mm Vertikal stroke 40 mm weight of the machine ca. 0,261 t dimensions 1,2 x 1,2 x 0,85 m Welding table "SIEGMUND Professional 750 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 11.5 - 13.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, parallel hole arrangement in a 25 mm grid on the sides. Including basic equipment. Table height 850mm Accessories shown are optional. Bwsdpfx Ajftd T Ssiyjw Price plus packaging and transport.

Condition: new, number 37 Positionen Bwjdpfx Ajgazl Rjiysw 28 mm condition neu weight 29 kg Basic set 1 37 pieces, 28mm system, consisting of: Clamps: 4 x 280604 Bolt: 8 x 280511 Stop: 6 x 280420.N Angle: 2 x 280110.G Threaded bolt 8 x 280543 Stop 8 x 160415 Accessory set. 1 x 163999 Price plus packaging and transport.

Condition: new, table length 1000 mm table width 1000 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,3 t dimensions 1,0 x 1,0 x 0,85 m Welding table "SIEGMUND Professional 750 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 17-19.0mm. The holes have a diameter of 16mm. Bjdpegazl Uofx Aiyjww Hole arrangement in 50 mm grid on the table top, Side walls 150mm with parallel hole arrangement in a 25 mm grid. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport. Other dimensions available.

Condition: new, table length 3000 mm table width 1500 mm Bwedpfx Ajgazmkeiyjw table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 1,1 t dimensions 3,0 x 1,5 x 0,9 m Welding table "SIEGMUND Professional 750 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 17-19.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, Side walls 150mm with parallel hole arrangement in a 25 mm grid. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport. Other dimensions available.

Condition: new, number 57 Positionen 22 mm Bwsdpfxsgazmre Aiyew condition neu weight 66 kg Set 2 57 pieces, 22mm system, consisting of: Clamps: 6 x 220610.1 Clamps 4 x 220630.1 Prism 4 x 220645.1 Bolt: 18 x 220511 Magnetic bolt 4 x 220740 Stop: 6 x 220410.N Stop: 6 x 220420.N Stop: 2 x 220426.N Angle: 4 x 220110.N Angle: 2 x 220152.N Accessory set. 1 x 223999 Price plus packaging and transport.

Condition: new, table length 1200 mm table width 800 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,19 t dimensions 1,2 x 0,8 x 0,85 m Siegmund workstation including 2 drawers Premium Light, through hardened tool steel X8.7, plasma nitrided and BAR coated. Drilling Ø 28 mm, drilling surface 100x100 mm grid. Material thickness approx. 15 mm With the new workstation from Siegmund, you can create your ideal workplace in a modular system. The Siegmund Workstation can be individually adapted and expanded to meet your needs and wishes. Whether sawing, drilling or welding - the absolute all-rounder in every workshop! Consisting of: 1x 004002 (Siegmund Workstation) 1x 804004.X7 (perforated plate) 1x 284030 (clamp holder) 1x 004020 (shelf) 1x 284035 (bolt and prism holder) 1x 004025 (tool wall including shelf) 2x 004210 (drawer) Bwsdpfxsga Nh Hj Aiyow Spacer ring 800653.N is required for clamping with bolts 280510/280511.

Condition: new, table length 1300 mm table width 800 mm stroke height 1010 mm weight max. in kg 2000 kg 190 mm connected load frequency 400 V Bsdpfofrzt Asx Aiyjww total power requirement 0,75 kW stroke speed - idle stroke upwards 40 sek. stroke speed - idle stroke downwards 30 sek. weight of the machine ca. 0,28 t dimensions of the machine ca. 1,3 x 0,8 x 0,23 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc.

Condition: new, number 57 Positionen weight 98 kg condition neu 28 mm Bwedpfx Aefh Uw Reiyew Set 2: 57 pieces, 28mm system, consisting of: Clamps: 6 x 280610.N Clamps: 4 x 280630.N Prism: 4 x 280648.1.N Bolt: 18 x 160511 Magnetic bolt 4 x 280740 Stop: 6 x 280410.N Stop: 6 x 280420.N Angle: 4 x 160110.N Angle: 2 x 280152.N Angle: 2 x 280162.N Accessory set. 1 x 283999 Price plus packaging and transport.

Condition: new, Elmo Rietschle C-VLR 301 (40) Vacuum Pump – 290 m³/h – 150 mbar – 5.5 kW Industrial dry-running claw vacuum pump supplied with a WEG electric motor. Surplus unit, stored in its original wooden transport crate. Specifications: - Manufacturer: Elmo Rietschle - Type: C-VLR 301 (40) - ID: 10285940HI - Pumping capacity: 290.0 m³/h - Ultimate vacuum: 150 mbar (abs.) - Motor power: 5.50 kW - Speed: 2930 rpm - Duty cycle: S1 – 100% - Standard: EN 60034 - Electric motor: WEG - Motor type: W21 - Motor efficiency: IE3 - Frequency: 50 Hz - Motor speed: approx. 2940 rpm - Made in Germany - Supplied in original wooden transport crate Condition: Surplus stock. The unit appears unused and is supplied as shown in the pictures. Operational condition has not been independently tested or verified by us. Bodpfxez E R T Ts Aiyoww Important: This item is surplus industrial equipment and is sold as-is and as shown in the pictures. No warranty or guarantee is provided. No claims regarding functionality, performance, or suitability for a specific application can be accepted. The buyer is responsible for inspecting and verifying the equipment before use. Location: Rotterdam, The Netherlands Worldwide shipping can be arranged upon request.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, overall weight: 30 kg, Factory liquidation for mask production. Installed in 2021, out of operation since March 2022. The equipment has already been dismantled and is ready for delivery. Stationary industrial vacuum cleaner Power: 2.2 kW Airflow: 300 m³/min Suction connection: 40/50 mm Bwsdpfexqghtox Aiysw Weight: 30 kg

Condition: used, Year of construction: 1970, machine/vehicle number: 251, functionality: fully functional, power: 18.5 kW (25.15 HP), input voltage: 380 V, input current: 36 A, input frequency: 50 Hz, cutting height (max.): 80 mm, cutting width (max.): 180 mm, saw blade diameter: 400 mm, height adjustment type: mechanical, saw blade bore: 55 mm, rotational speed (max.): 2,920 rpm, Used, functional underslab multi-blade saw "SENDEN" with mounted feed unit "ROMA" Spindle diameter 45 mm, incl. 4 saw blade clamping sleeves with 55 mm diameter (suitable for circular saw blades with a 55 mm bore). No spacer rings or saw blades are included. Drive motor 36.5 A / 18.5 kW. 2920 RPM. The machine is designed for a cutting height of up to approx. 80 mm. Saw blades of approx. 250 - approx. 400 mm can be used. 4 clamping sleeves are included in the scope of delivery. Original technical documentation is not available. Bodpfx Aie Agu Txeysww Please refer to the photos! Sale is as is. No warranty for defects. The machine can be inspected (power is connected). Mounted 4-roller feed unit ROMA Type DVPF 0810-4/2 with ribbed feed roller rollers. Feed speeds can be directly selected. Electrical power 0.88/1.25 kW.

Condition: used, mileage: 131,400 km, power: 315 kW (428.28 HP), first registration: 05/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 08/2027, color: orange, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), * Special equipment: Leistikow combination flushing unit * Total tank volume 9770L, diameter 1600 mm * Hydraulic, fully opening bottom flap with hydraulic-operated central locking * Sedimentation chamber 500l * Extension piston with variable chamber division * Position 1: Water chamber 2390/sludge 6880L * Position 2: Water chamber 4360/sludge 4910L * Large flushing hose reel, hydraulically swiveling, with storage for suction hose for 160 m high-pressure hose DN25 with automatic hose guide * Suction hose storage, double telescopic * Small flushing hose reel with hydraulic drive for 80 m flushing hose DN13 with automatic hose guide * With separate pressure regulating valve for operation with spray gun * Cassette deck for storage of the suction hose DN125 * High-pressure pump Uraca KD718 G60 with 648 l/min * Vacuum pump Kaiser VPC 60 with 1625 l/min * Total operating hours of the vehicle 8118 h * Hand washing basin * Cable winch, hydraulically operated, mounted on a swiveling reel * Control panel on the right at the rear of the vehicle * Control panel on the swiveling reel * Operation also possible via remote control * Vehicle with remote control * Axle load front axle 8.0 t, * Trailer socket 12V / 13-pin, * Audio system: CD radio (Bluetooth), * Exhaust pipe routed upwards behind the cab, * Battery 220 Ah, * Compressed air connection in the cab, * Compressed air tank, aluminum, * Electrical pre-installation in the cab 24V / 100 A, * Cab: steel-sprung, comfort, * Suspension: Front springs 8.0 t, 2 leaves, * Transmission 12-speed - Type: G 330-12, * Rear axle bevel gear 300, * Communication interface, * Fenders 3-part, * Engine compartment encapsulation reinforced, * Tag axle, steered, liftable, Bodpfx Aiezz Tz Isyoww * Auxiliary drive MB 123-10c, * Parameterizable special module, * Reversing warning, acoustic (warning signal outside), * Rear cross member reinforced, * Circuit breaker, * Seats in the cab: Driver's seat, suspension seat, comfort, * Sun visor, external, * Sun visor, side window, driver's door, * 12V socket in the passenger footwell, * 24V / 25 A socket in the passenger footwell, * Rotating beacon, * Twin-disc clutch, * Oil cooler, transmission Further equipment: * Emission standard EURO 6, * Axle configuration: 6x2, * Trailer brake 2 - line, * Connections on the left, trailer socket 24V / 15-pin, * Antos, * Exterior mirrors, electrically adjustable and heated, * Differential lock, rear axle, * ClassicSpace, * Storage compartment, external, left, * Cab floor with engine tunnel 320 mm, * Cab: mounting height 420 mm, * Suspension: leaf spring / air, * Power windows, * Windshield tinted, * Generator 100 A, * Transmission 12-speed - Type: G 211-12, * Urea tank (AdBlue): 60 L, * Lifting roof, manual (steel), * Info display 10.4 cm, * Comfort locking system, * Fuel tank: 290 L, aluminum, * Air intake from the front, * Air compressor 2-stage, * Engine 10.7 L - 315 kW R6 diesel (OM 470), * Tag axle, single tires, * Curb mirrors, * Waste heat recovery, * Disc brakes, front and rear axle, * Errors, changes and prior sale are reserved.

Condition: new, Motor: 750W - 230V - 1 Phase Bsdpfxok Iuqys Aiyjww Drilling capacity: 20 mm Spindle stroke: 85 mm Spindle taper: MK2 Number of speeds: 16 Spindle speed: 220-2840 rpm Work table: 305 x 305 mm Base: 460 x 280 mm Column diameter: 72 mm Overall height: 990 mm Weight: 60 kg Packaging: 820 x 500 x 290 mm INCLUDED * Digital depth stop * CE protective shield * Laser guide * LED lighting * CE emergency stop * Drill chuck with MK2 taper * Ejector pin

Condition: new, table length 1500 mm table width 1500 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,8 t Bodsmhm Aujpfx Aiyeww dimensions 1,5 x 1,5 x 0,9 m Welding table "SIGMUND Professional 750 + Plasma-nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top parallel hole arrangement in 50 mm grid on the sides. Incl. Foot basic equipment. Pictured accessories optional. Price indication plus packaging and transport.

Condition: as good as new (ex-display), Year of construction: 2025, Pressing area: 3000 mm x 1500 mm Operating vacuum: -0.85 bar Vacuum pump flow rate: 40 m³/h Pump power: 1.5 kW Noise level: 70 Db Heating temperature: max. 200 °C Bwsdpsu Egp Ijfx Aiyow Heating power: 16 kW Machine length: 3100 mm Machine width: 1650 mm Machine height: 1750 mm Weight: 950 kg

Condition: new, table diameter 350 mm table load 100 Kg Bwedpfxeupw Nxo Aiyew swivelling range 90 Grad turning speeds 0,2 - 2 stufenlos U/min table load capacity 50 kg. vertikal total power requirement 220 kW weight of the machine ca. 0,055 t dimensions of the machine ca. 0,46 x 0,4 x 0,42 m

Condition: new, table length 430 mm table width 240 mm x-travel 225 mm y-travel 160 mm table height 160 mm T-slots 12 mm weight 45 kg Bjdjupw T Rjpfx Aiyeww dimensions 0,6 x 0,45 x 0,2 mm Cross table with turntable