Used Vbmt Turning Plates for sale (19,774)

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table Laedpfx Aljxm Sago Nsc -Clamping plate: on a solid base frame, with vice -Clamping surface: 2000 x 1000 mm -Table height: 925 mm -Plate thickness: 115 mm -Vice: clamping jaws: 150 x 30 mm clamping width 250 mm -Transport dimensions: 2480/1000/H1110 mm -Weight: 1850 kg

Condition: ready for operation (used), Year of construction: 2010, operating hours: 5,002 h, functionality: fully functional, machine/vehicle number: NT100JG0126, turning length: 424 mm, turning diameter: 370 mm, travel distance X-axis: 380 mm, bar passage: 52 mm, controller model: FANUC FS-31iA5 (MAPPS 4), TECHNICAL DETAILS Turning length: 424 mm Maximum turning diameter: 370 mm (270 mm with turret 2) Bar capacity: 52 mm Turning-milling spindle Full indexing capabilities: Yes X-axis travel: 380 mm Y-axis travel: ± 105 mm Z-axis travel: 460 + 155 mm (ATC) B-axis: ± 120º Spindle speed: 12,000 rpm Drive power: 9/5.5 kW Tool magazine Number of magazine positions: 38 Tool holder: Capto C5 Maximum tool length: 250 mm (210 mm for tools under Ø70 mm) Maximum tool diameter: 70 mm / Ø130 mm (with/without adjacent tools) Maximum tool weight: 5 kg Lower turret Lodpezf H Ezsfx Al Noac X-axis travel: 155 mm Z-axis travel: 610 mm Number of tool slots: 10 Tool speed: 6,000 rpm Drive power for driven tools: 1.5/1.2 kW Main spindle Spindle speed: 6,000 rpm Drive power: 11/7.5 kW Spindle bore: 73 mm Chuck type: Hollow chuck (8") Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Maximum torque: 223 Nm Counter spindle Spindle speed: 1,000 rpm B-axis: 4 fixed positions, 0º, -30º, -180º (-225º for overhang onto conveyor, if available) MACHINE DETAILS Control: FANUC FS-31iA5 (MAPPS 4) Potential rated power: 39.24 kVA Dimensions & Weight Dimensions (L x W x H): 2,705 x 2,425 x 2,385 mm Weight: 8,800 kg Operating Hours Power on: 54,061 h Spindle 1 operating hours: 9,813 h Spindle 2 operating hours: 5,002 h EQUIPMENT Chip conveyor Signal lamp High-pressure pump Air blow nozzle outside the spindle Foot switch (dual) for main and counter spindle

Condition: excellent (used), Year of construction: 2021, Maximum turning diameter 2800 mm Maximum swing diameter 3000 mm diameter of spindle flange 1100 mm control Siemens 840 D sl Table rpm 230 1/min Maximum speed of driven tools 6000 1/min x-travel 2700 mm z-travel 1000 mm Feed - X 24 m/min feed capacity - x 22 kN tool taper CAPTO C8 total power requirement 200 kVA dimensions of the machine ca. 10,4 x 6.3 x 5,7 m weight of the machine ca. 120 t Equipment/Accessories: - 2 tool changers one with 25 positions and one with 41 positions - 2 x chip conveyors - Coolant system, 6 bar - High-pressure cooling, 70 bar Lsdpfszf Np Nex Al Njac - Knoll paper belt filter - 12-jaw balancing chuck, RÖHM - internal coolant supply - Hydraulic unit - Automatic door - Electric handwheel - Technical documentation

Condition: good (used), Rolling width: 2050mm Rolling thickness 3x toproll Ø:18mm Rolling thickness 5x toproll Ø:21mm Rolling thickness prebending: 12mm Top Roll Ø: 280mm Side roll Ø: 260mm Number of rolls: 3 Rolling speed: 0-5 Ledpfjwtpgtsx Al Noac Adjustiment lower roll: 0-150mm/min. Adjustment side rolls: 0-150mm/min. Top support: yes Power: 12kW Length: 3000mm Width: 1500mm Height: 1600mm Weight: 5200kg

Condition: used, Year of construction: 2005, sheet width 3050 mm plate thickness 16 mm distance between columns 3100 mm no. of strokes 16 Hub/min back stop - adjustable 10 - 1000 mm cutting angle 0,5 - 2,5 ° down holder 13 Stück oil volume 300 l total power requirement 22 kW weight 14000 kg dimensions 4100 x 2300 x 2000 mm Features: - Electro-hydraulic, slide-guided sheet metal shear - With ELGO P9724 NC digital control unit Laodpfx Asyzi Nwsl Nec * Ability to enter target and actual values for the backgauge * Digital display - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment - Front finger guard - 1x sturdy side stop with T-slot

Year of construction: 2026, condition: used, NEW, built in 2026 Automatic loading and unloading station. Suitable for solid wood, MDF, gypsum board, cement fiber board, and planks. Examples: Doors, planks, MDF panels, cabinet fronts, gypsum board, and facade panels. Adaptations to other products are possible. The machine operates at a constant speed andwith a set loading and unloading capacity. This allows you to easily automateyour loading and unloading processes and increase process reliability. The system operates with a 2-circuit vacuum system. Siemens control panel. Technical Specifications: - Manufacturer: Ka-Ma - Model: KR-1300-1 - Working width: 1,300 mm - Includes belt conveyor, length 3,000 mm - Working height: 930 ± 50 mm - PLC control, operated via a touch panel, Siemens S7-1200 - Loading and unloading of parts via 2 suction plates, length 442 mm - Automatic signal upon completion of the loading process - Max. horizontal speed: 0.5 m/s - Horizontal working stroke: 1,300 mm - Max. vertical speed: 0.5 m/s - Stack height approx. 1,000 mm (including pallet under the plate stack) - Loading side on the left in the direction of travel - Vertical working stroke: approx. 1,200 mm - Max. lifting capacity: approx. 85 kg, continuous operation 65 kg - Max. component width: 1,300 mm - Max. component length: approx. 2,850 mm - Max. conveyor belt speed: continuously variable up to max. 10 m/min. - Electric motor power: 1.5 kW- Electronic components: Schneider Electronics and Siemens - Weight: 1,200 kg Optional: 2-circuit vacuum system with 4 additional suction cups Lodpfey S S Htsx Al Neac and the ability to lift the panels 15 mm on one side before vertical movement; required for all materials that can be vacuum-sealed. YouTube link:?v=WpRUnvPFqN0

Condition: good (used), Year of construction: 2015, sheet width 2050 mm plate thickness 3.0 mm Lasdpjzd Hb Hjfx Al Noc distance between columns 2100 mm back stop - adjustable 550 mm no. of strokes 35 Hub/min cutting angle 2°12 table width 400 mm table height 850 mm Control konv. total power requirement 3.0 kW weight of the machine ca. 1280 kg dimensions of the machine ca. 2400 x 1500 x 1300 mm Current list price: approx. 20.000 euros From a maintenance workshop Features: - Robust / high-performance electromechanical guillotine shear - Manual material backgauge * Continuously adjustable range * Adjustment from the back via handwheel * Includes mm scale * Max. adjustment range: 550 mm - Manual cutting gap adjustment, from the front - 1x side stop with mm scale - 2x support arms - 1x freely movable foot switch - rear sheet metal chute - rear safety device (light barrier) - operating instructions (machine control system) - Transport stand (homemade)

Condition: good (used), Clamping plate, milling support, plate field, welding table, welding table, plate boring mill, clamping angle, clamping cube, clamping devices, clamping supports, clamping tool, clamping box, clamping tower -Clamping block: for workpiece clamping -Width: 700 mm -Length: 107 mm -Height: 440 mm -Threaded holes: M24 -Bores diameter: mm -Number: 2x milling support available -Price: per piece Lajdpfecn Ibgjx Al Nec -Weight: 235 kg/piece

Condition: good (used), Year of construction: 1989, operating hours: 64,136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bed cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Speed range: 16 – 3150 rpm Feed range longitudinal & face: 0.5 – 5000 mm/min Rapid traverse longitudinal & face: 9 m/min Main drive: 30 kW Dimensions of machine with chip conveyor (L x W x H): 5400 x 2200 x 2000 mm Weight: 6400 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 with TFT display General description: CNC manual input control system with program entry via function and numeric keypad. All information is entered in dialogue with the screen. Integrated menu technology with plain text display of all functions. Operator keypad, display, and electronic handwheel located within a separate chip guard housing. The EPL control offers the following capabilities: • Direct interactive program entry and editing by the operator through the EPL control without manual technological preparation • NC programs in ISO/EIA format can be entered, output, or manually keyed in via the RS 232 serial interface Machining cycles: • Removal cycles for longitudinal, facing, and contour turning, including with allowance • Thread cutting • Undercuts as per DIN 509-Form E and F and DIN 76; grind stock programmable • Axial and radial grooves as per DIN 471 and 472, including bottom finishing • 90° radii and 45° chamfers • Automatic cutter radius compensation for cycles, undercut, groove, radius, chamfer Programming: • Block-orientated, metric/inch, diameter for absolute entry, radius for incremental entry • Full circle programming, subroutine technology, hide levels for program sections, zero point offset, mode selection via menu Program entry and output: • Interactive via guided menu or direct in dialogue • Hydraulic 3-jaw chuck Ø 315 mm with through spindle bore Ø 80 mm • Hinged chip conveyor • 12-position tool turret VDI 40, 6 standard stations + 6 driven tool stations • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting Ljdpfx Alovr Eh Eo Neac • 12 various standard toolholders (to be finalized on site) Overhauled servo drive for main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, sheet width 1050 mm plate thickness 2,5 bei 400N/mm² mm roll diameter 90 mm Weight ca. 490 kg Laedpfx Aljzfayfj Nsc Motorised three-roll round bending machine in an asymmetrical configuration. Upper roll swivels forwards Bending roll adjustment via handwheel; suitable for conical bending Emergency stop cord The machine comes from a training workshop and is in very good condition

Condition: used, plate width 4000 mm plate depth 3000 mm plate height 300 mm weight / kg LxWxH: 4000 x 3000 x 300mm Laodpfx Alozfqm Ne Nec

Condition: excellent (used), Here, we offer a SUN-TEC cleanroom technology heating plate. SUN-TEC cleanroom technology heating plate Cleanroom workstation with heating plate 1600 mm x 1200 mm x 2200 mm Rated voltage: AC 200V, 3 phases, 50Hz, 30A Max. temperature: 200°C Type: Y9AT417 Condition: used Scope of delivery: (See image) Laedezdqbqspfx Al Nec (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, turning length: 500 mm, turning diameter over cross slide: 290 mm, spindle speed (max.): 5,500 rpm, spindle bore: 73 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 550 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 22 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, chuck outer diameter: 225 mm, swing diameter over cross slide: 290 mm, spindle nose: FL 140h5, overall weight: 4,300 kg, Equipment: documentation/manual, rotational speed infinitely variable, A complete DMG MORI CTX alpha 500 V6 model, fully equipped! This machine features a C-axis, powered tooling, Y-axis, sub-spindle, and more. We acquired this machine in working order from production, and it can be inspected in working condition by appointment. Additional options & accessories: - Band filter system including high-pressure pump - DMG CELOS software - 3-jaw chuck (SMW Autoblok KNCS-N-225-66) on the main spindle - 3-jaw chuck (SMW Autoblok KNCS-N-170-43) on the sub-spindle - Chip conveyor - Coolant gun - Various VDI-30 tool holders (6 powered, 4 static) - Original DMG mist extraction system Laedpszc Nlajfx Al Nsc - All original documentation Weight & dimensions: 4,300 kg 4066x2583x1829 mm (LxWxH)

Condition: reconditioned (used), functionality: fully functional, Year of construction: 1997, sheet thickness steel (max.): 16 mm, cutting length (max.): 4,000 mm, HYDRAULIC SHEAR LVD MVSB 40/16 Serial number 24159 Yom 1997 TECHNICAL SPECIFICATIONS Max. sheet thickness St45 16 mm Cutting length 4050 mm Distance between uprights 4250 mm Range back gauge 1000mm Min. cutting angle 0.5 ° Max. cutting angle 2.0 ° Min. number of strokes/min. 7 Max. number of strokes/min 26 Min. blade clearance 0.5 mm Max. blade clearance 1.6 mm Motor power 22 kW Lasdpfxeuipu Eo Al Noc Approx weight 20500 Kg LxWxH 4800x2170x2750mm Accessories included; Electrical adjustment of back gauge 1000mm with Go-to controller blade clearance and cutting angle adjustable. 1 x Front support 1500mm, one with 90° square arm front support 1 x Front support of 1500mm Foot pedal

Condition: used, Year of construction: 2011, gearing type: automatic, color: other, Year of manufacture: Apr 2011 Axle 1: left 10 mm right 10 mm Ledpfx Aoy Ennasl Neac Axle 2: left 12 12 mm right 12 12 mm Axle 3: left mm right mm

Condition: used, Year of construction: 2008, operating hours: 24,869 h, gearing type: automatic, color: other, Year of manufacture: Apr 2008 Lodpfx Aloy N D Rlo Nsac Axle 1: left 10 mm right 10 mm Axle 2: left 12 12 mm right 12 12 mm Axle 3: left mm right mm

Condition: used, Year of construction: 2010, gearing type: automatic, color: other, Year of manufacture: Apr 2010 Axle 1: left 8 mm righ8 mm Axle 2: left 8 8 mm right 8 8 mm Ledpsy Enkbefx Al Njac Axle 3: left mm right mm

Condition: used, Year of construction: 2011, operating hours: 24,159 h, gearing type: automatic, color: other, Year of manufacture: Apr 2011 Axle 1: left 12 mm right 12 mm Axle 2: left 18-18 mm right 18-18 mm Axle 3: left mm right mm Lsdpfx Aley Uw Alj Njac

Condition: used, Year of construction: 2012, operating hours: 27,315 h, gearing type: automatic, color: other, Year of manufacture: Apr 2012 Axle 1: left 10 mm right 10 mm Axle 2: left 12 12 mm right 12 12 mm Lasdpfx Aljy Em Rts Njc Axle 3: left mm right mm

Condition: used, Year of construction: 2012, operating hours: 28,191 h, gearing type: automatic, color: other, Year of manufacture: Apr 2012 Axle 1: left 8 mm right 8 mm Axle 2: left 10 mm right 10 mm Lajdpfx Asy Engcjl Nec Axle 3: left mm right mm

Condition: used, machine/vehicle number: XLWRT2839C2301615, Year of construction: 2012, operating hours: 20,000 h, gearing type: automatic, color: other, Year of manufacture: Apr 2012 Axle 1: left 8mm right 8mm Axle 2: left 6 6 mm right 6 6 mm Axle 3: left mm right mm Ledewd Na Uopfx Al Njac

Condition: used, machine/vehicle number: XLWRT222079306537, fuel type: diesel, color: other, gearing type: automatic, Year of construction: 2007, operating hours: 21,826 h, Year of manufacture: May 2007 Lajdpfey T H Arex Al Njc Axle 1: left 18 mm right 18 mm Axle 2: left 6-6 mm right 6-6 mm Axle 3: left mm right mm

Condition: used, Year of construction: 2008, operating hours: 25,885 h, gearing type: automatic, color: other, Year of manufacture: Apr 2008 Laodpfx Aloy N Ab Ne Nsc Axle 1: left 10 mm right 10 mm Axle 2: left 12 12 mm right 12 12mm Axle 3: left mm right mm

Condition: used, Year of construction: 2011, operating hours: 24,846 h, gearing type: automatic, color: other, Year of manufacture: Apr 2011 Axle 1: left 10 mm right 10 mm Axle 2: lef 10-10 mm right 10-10 mm Lodpfx Aley Enn Hs Neac Axle 3: left mm right mm

Condition: used, Year of construction: 2016, color: other, Year of manufacture: Apr 2016 VERY NICE GOOD WORKING MODERN TERMINAL TRACTOR. Lodey Hrhyjpfx Al Nsac