Used Veneer Vacum Press for sale (12,730)

Condition: excellent (used), Year of construction: 2017, Technical Specifications: Total pressing force 1500 kN Setting range 10 – 100 % Dedpfx Amszd T Uysgekp Total pressing surface 3100 x 1350 mm Specific pressure at full charge 3,6 daN/cm² (kp/cm²) 6 cylinders 90 mm diameter 400 mm stroke Operating hydraulic pressure 395 bar Daylight height 400 mm Daylights 2 Daylight opening 150 mm 400V 50Kz 3 phase CE 3 pieces heating devices each with 18 kW for heating up the fluid medium water to a working temperature of 130°C.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, type of input current: three-phase, A very good machine with the benefit of the infeed table and outfeed exit table, which saves significantly on labour. Dkjdpszifpgsfx Amgep

Condition: used, Year of construction: 1983, Max. press length: 2500 mm Max. press width: 1250 mm Total pressing force: 80 t Specific pressing force: 2.5 kg/cm² Press opening width: 400 mm Heating plate material: standard aluminum Operation: button control Swivel button: Yes Number of pressure pistons: 4 Safety edge strip: Yes Condition of heating plate: good Weight: 3800 kg Dksdpozkl Tbsfx Amgep Dimensions: 2850 x 1410 x 2000 mm Storage location: Nattheim

Condition: used, Year of construction: 1998, Plate size: 2500 x 1300 mm Total clamping force: 70 tons Button operation Opening: 400 mm Cylinders: 4 Motor power: 0.75 kW Gold-anodized heating plates Double safety release cord with rack and pinion parallel guidance Dsdpfxozi Avkj Amgokp Dimensions: 3050 x 1700 x 1910 mm Storage location: Supplier

Condition: not inspected (used), functionality: unexamined, 5 kW 20 press cylinders 3 press cylinders individually with foot valve Each set of 5 cylinders individually disconnectable with hand valve Assembly machine - cutting length: 9300 mm Dsdpfx Amox Hiqrsgekp Total height: 2100 mm Pressing height: 1300 mm Extraction port: 120 mm

Condition: used, Year of construction: 1978, used good condition cleaned functionality tested Dedpfx Aszkl Ifomgekp Manufacturer: Bürkle Type: U 88 Year of manufacture: 1978 Machine no.: 3102629 Safety tested (GS certified) Touch control Safety cable on top Electric heating Specific maximum pressing force: 80 t Aluminum plates glued Lower piston Quantity: 6 Plate size approx. mm: 2550 x 1300 Opening width approx. mm: 400 Piston diameter: 70 Space requirement approx. L x W x H approx. mm: 3100 x 1500 x 1900 Weight approx. kg: 4000 Storage location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty and guarantee

Condition: reconditioned (used), functionality: fully functional, power: 9 kW (12.24 HP), Ott veneer press connected load 380V 9kW Panel size 2250 x 1350 mm Dksdjtwp Iwopfx Amgsp Elkom heating plates, gold anodized Plates and hydraulics in order

Condition: not inspected (used), Year of construction: 1975, Power connection: 400V, 13kW 2 heating plates, each measuring 1200 x 2250 mm Heating plates controlled by 2 thermostats Pressing pressure: 250 bar Dkedpfokkflbsx Amgep Dimensions (L x W x H): 2590 x 1330 x 1950 mm Weight: approximately 2800 kg Press stroke: 380 mm

Condition: used, Year of construction: 1997, No. 3214 Feed-through veneer press Sergiani LAS Plus Dsdpfov Sthgox Amgekp Used, year of construction 1997, already dismantled and stored Automatic press with continuous operation for the production of barrier doors, finished doors (veneer doors, HPL, CPL) and pre-treated parquet (2 - 3 layers). The press can be used to load the workpieces one after the other, while the pressure in the other compartments is kept constant. Up to 2 employees are required to operate the line. The multi-daylight press enables a very high production output. The pressing time is approx. 3 minutes (180 seconds) and is spread over 10 levels, which means that the press opens every 18 seconds and a new panel is processed. The press has already been dismantled and stored. The system was in operation until it was dismantled. The previous owner produced 3-layer parquet with the system. The bottom layer was inserted manually. The middle layer consists of one piece. This was glued at the top and bottom and automatically inserted into the system. The top layer was also inserted automatically. Glue spreader / glue applicator not included (optionally available) Stages: 10 Pressing force: approx. 5.5 kg/cm² Total force: 200 tons Panel size: approx. 2500 x 1300 mm LW Heating: Hot water Area of application: Production of doors, laminating, veneer and wood-based material processing High productivity with a capacity of up to 1200 doors per shift (factory specification) Vacuum loading system with 2-lane infeed roller conveyor, without gluing Scissor lift table with loading belt (belt approx. 2900 x 1000 mm LW) Vacuum stacking station with outfeed roller conveyor Space requirement for press with loading table approx. 6500 x 2365 mm LW Space requirement for entire production line approx. 25000 x 5710 mm LW Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without transportation and assembly Loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Year of construction: 1979, Pressing area: 2200 mm x 1100 mm Opening: 360 mm Dkedpfx Amsy A Hkbogjp Heating: electric Plate surface: aluminium Emergency stop: no Pressing force: 65 t Number of cylinders: 4 Power consumption: 21 A Machine length: 2500 mm Machine width: 1300 mm Weight: 2600 kg

Condition: used, Year of construction: 1989, Pressing area: 2500 mm x 1100 mm Opening: 400 mm Heating: electric Plate surface: Aluminium, gold anodized Emergency stop: yes Pressing force: 65 t Dkjdpfx Asyl Tinomgop Number of cylinders: 4 Current consumption: 22 A Machine length: 3000 mm Machine width: 1300 mm Weight: 3000 kg

Condition: used, Year of construction: 1976, Pressing area: 2500mm x 1250mm Opening: 360mm Top platen heating: electric Dksdpfxox Edl Ej Amgsp Bottom platen heating: defective Platen surface: aluminum, anodized Pressing force: 90t Number of cylinders: 4 Power consumption: approx. 33A Machine length: 3000mm Machine width: 1500mm Weight: 4000kg

Condition: used, Year of construction: 1982, Pressing area: 2200mm x 1100mm Opening: 400mm Heating: electric Platen surface: aluminum Emergency stop: yes, pull-cord Dkodozhm Dvjpfx Amgsp Pressing force: 60 tons Number of cylinders: 4 Power consumption: 16kW Machine length: 2500 mm Machine width: 1300mm Weight: 3000kg

Condition: used, Year of construction: 2002, Italpresse BG/660 Molding press / Heated platen press – 660 t pressing force Manufacturer: Italpresse Model: BG/660 Year of manufacture: 2002 Condition: Used, operational Technical data * Pressing force: 660 t Dkjdpey Ufqdofx Amgjp * Press platen size: 1,900 x 1,600 mm * Heating power: 31 kW * Connected power: 108 kW * Operating voltage: 400 V * Control voltage: 220 V * Frequency: 50 Hz * Phases: 3 + N + PE * Rated current: 160 A * Weight: approx. 28,000 kg * Design: Bottom platen heated platen press / Molding press Robust hydraulic molding press from Italpresse for the production of molded parts and glued wood components. The machine has heated press platens and a pressing force of 660 tons. Ideal for applications in the furniture, wood, and molding industries. The press is in used condition. Inspection possible by appointment. Documentation available.

Condition: good (used), Code: 0120 Brand: ORMAMACCHINE Model: NPC/3000S - CE Standard Hot press for wood, veneer, wood panels, coated panels, veneer, composite materials, cork, aluminium and various materials - CE Standard Platen dimensions mm 3000 x 1300 Thrust ton 70 N° 6 pistons Opening mm 400 Motor Hp 2 Hot water heating by boiler Overall dimensions: mm 3600 x 1550 x 1900 h Weight kg 3500 Dedpfxszil Ipj Amgokp

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Equipment and technical data: - User-friendly controls - Ideal working height - Large opening - Full access from all four sides - Push-button control - Stop button - Safety cable - EMERGENCY STOP at every location - Timer with acoustic signal - Pressure switch automation - Automatic temperature control system - Infinitely adjustable stroke limitation - Heavy-duty rack compensation - Energy-saving mode as standard - Switchable side cylinders - Total pressing force: 120 tons - Plate dimensions: 3000x1350 mm - Number of cylinders: 6 - Piston diameter: 85 mm - Max. opening / stroke: 400 mm - Closing time: approx. 16 sec - Heating time to 80°C (from room temperature): approx. 14 min - Maximum permissible operating temperature: 140 °C Dksdoy R Haxjpfx Amgsp - Total connected load: 20.1 kW - Hydraulic power: 1.21 kW - Fuse rating: 35 A - Dimensions: 3500x1610x2000 mm - Total weight: 6200 kg Availability: short notice Location: 63934 Röllbach

Condition: used, Used machine Features and technical data: Dodpswpm I Hsfx Amgekp - Press area: 2,200 × 1,100 mm - Number of cylinders: 4 - Max. pressing force: 60 tons - Version: single deck - Heating plates: gold anodized ELKOM energy-saving plates - Opening width: 350 mm - Connected load: 14 kW - Piston diameter: 80 mm - Operating pressure: 365 atü Dimensions: 2,600 m × 1,250 m × 1,750 mm Availability: short-term Location: Röllbach

Condition: as good as new (ex-display), Year of construction: 2024, New hydraulic heating plate press Manufacturer: ITALPRESSE, Type XL/6 30-13 with gold-anodized plates Touch display control - Electric heating plates, 3,000 x 1,300 mm - Total pressure: 90 tons - Number of heating plates: 2 pcs. - Number of tiers: 1 pc. - Cylinder stroke: 350 mm - Tier opening: 350 mm - All-side loading - Number of pressure cylinders: 6 pcs. - Diameter of pressure cylinders: 85 mm - Power requirement of hydraulic unit: 3 kW - Electric heating plates made of solid, hard aluminum with built-in heating wires - Heating power: 22 kW - High-pressure insulation plates - Working temperature: 90° C - Max. temperature: 120° C - Operating voltage: 400 V/50 Hz - Safety regulations according to CE standard Standard equipment: - Movement of the press table with rack and pinion and parallel guides at 2 corners of the press table, made of self-lubricating material - Electronic control unit with touch screen for controlling and monitoring the machine Dsdpfsdx R Tfsx Amgjkp - Digital timer for setting the pressing time and automatic opening - Digital input and monitoring of the pressing pressure - Digital timer for setting the pressing time - Digital diagnostics and display of error messages - Safety circuit with two-hand operation - Safety pull cord - Safety bracket for the lower press table Integrated accessories: - Touch screen TS/400 - EFC Electronic flatness control - Gold-anodized heating plates (bus bars) Location: In stock at 54634 Bitburg - Immediately available -

Condition: excellent (used), Year of construction: 1991, Manufacturer: Ott Dsdpfx Ajyutxnomgskp Model: JU 2511/70 Year of manufacture: 1991 Technical condition: very good – inspection possible Type: Veneer press Drive: electrohydraulic Power: approx. 13.6 kW Heated plates: aluminium, dimensions 2550 x 1100 mm (L x W) Heating: electric Hydraulic cylinders: 4, each with a diameter of 80 mm Total pressing force: 70 tons Specific pressing force: 2.5 – 3.5 kg/cm² Opening stroke: 400 mm Control: push-button control for open – close – stop Pressure monitoring: automatic adjustment Adjustable limit switch: for specific opening stroke Safety features: safety pull cord Transport dimensions: approx. 2900 x 1400 x 2000 mm (L x W x H) Weight: approx. 3000 kg Location: ex works customer - will be delivered to stock 54634 Bitburg -

Condition: excellent (used), Year of construction: 2020, New hydraulic heating platen press Manufacturer: ITALPRESSE, Type XL/6 30-13 with gold-anodized plates Touch display control system - Electric heating platens 3,000 x 1,300 mm - Total pressing force: 90 tons - Number of heating plates: 2 pcs. - Number of levels: 1 - Cylinder stroke: 350 mm - Daylight opening: 350 mm - All-around loading possible - Number of hydraulic cylinders: 6 pcs. - Cylinder diameter: 85 mm - Hydraulic unit power requirement: 3 kW - Electric heating plates made of solid hard aluminum with built-in heating wires - Heating capacity: 22 kW - High-pressure insulation plates - Working temperature: 90° C - Max. temperature: 120° C - Operating voltage: 400 V, 50 Hz - Safety specifications according to CE standard Standard equipment: - Movement of the press table with rack-and-pinion and parallel guides at 2 corners of the press table made from self-lubricating material - Electronic control unit with touch screen for machine control and monitoring - Digital timer for adjusting pressing time and automatic opening - Digital input and monitoring of pressing pressure - Digital timer for adjusting pressing time - Digital diagnostics and fault display - Safety circuit with two-hand operation - Safety pull cord - Safety support for lower press table Accessories included: - Touch Screen TS/400 - EFC electronic flatness control Dkodpfx Amjxgbxfjgsp - Gold-anodized heating plates (Busse) Location: Ex stock - Immediately available -

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, operating hours: 5,000 h, pressing force: 200 t, table width: 1,400 mm, table length: 3,200 mm, total length: 3,200 mm, total width: 1,400 mm, total height: 2,900 mm, overall weight: 23,000 kg, operating temperature: 200 °C, workpiece height (max.): 150 mm, temperature: 210 °C, For sale is a virtually new veneer press with an infeed/outfeed table from the German manufacturer Wemhöner, model KTV1E (serial number 1645, year of manufacture 1992). The machine is in excellent condition and has seen very little use. Machine type: Continuous press Manufacturer: Wemhöner Type: KTV1E Serial number: 1645 Selecta Year of manufacture: 1992 Location: 57223 Kreuztal Available: immediately Technical data Press length: 3200 mm Press width: 1400 mm Heating plates: yes Heating medium: oil Infeed: yes Conveyor belt: 3200 x 1900 mm Outfeed belt: 3200 x 1900 mm Press area: 3200 x 1450 mm Djdpfx Aownpcdsmgokp Clearance height: approx. 100 mm Preheating temperature: 200° Heating capacity: 45 kW Heating medium: oil Pressing force: 200 tons The press machine is in top condition, has seen very little use, and has been used exclusively for development projects for the past 15 years. I would be happy to send you more information and pictures upon request. The machine is available immediately and can be inspected at any time by appointment. Self-collection only! Functional video available upon request. If you are interested, I am happy to provide you with further information or arrange a viewing!

Condition: good (used), Year of construction: 1982, A well-maintained Joos veneer press is for sale. Dsdpezczqnofx Amgokp Available from the end of June/beginning of July. Machine details: Press area: 2550mm x 1350mm Pressing force: 900kN Press chamber height: 400mm Number of cylinders: 4 Weight: approx. 3100kg Electric heating plates Operating pressure: 355 bar Gold anodized surfaces.

Condition: good (used), Code: 0421 Brand: ORMAMACCHINE Model: NPC - CE Standard Dksdszgtpispfx Amgjp Hot press with diathermic oil heating for wood, joinery, furniture, custom-made furniture, panels, doors, composite materials and various – CE Standard Platen sizes mm 3000 x 1580 Solid steel platens with diathermic oil heating N° 6 pistons diameter 85 Opening mm 400 Platens heating by electric boiler Thrust 120 ton Guides side racks Mylar Overall dimensions mm 3700 x 1850 x 2600 h

Condition: used, Year of construction: 2008, machine/vehicle number: 10322T, functionality: fully functional, pressing force: 120 t, stroke length: 355 mm, table width: 1,560 mm, table length: 3,100 mm, total length: 4,200 mm, total width: 1,800 mm, total height: 2,080 mm, overall weight: 9,000 kg, Equipment: documentation/manual, We offer this used Interwood HOP veneer press, year of construction 2008. Location: Maryport, Cumbria, UK 18000GBP (with VAT) 15000GBP exVAT Open to offers Dedpfx Aoy Ah T Romgjkp 20m cable and distribution box included in price. Type: HOP Serial number: 10322T Year of manufacture: 2008 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), functionality: fully functional, Italpresse UT/8 veneer press Djdpfx Aozi Eg Eemgekp Shelf length: 3500 mm Shelf width: 1300 mm Press with 8 cylinders Shelves heated with water from a boiler.