Used Veneer Equipment for sale (42,745)

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: KB-20211022002, 3 x Hangzhou Kuangbo Machinery Equipment Co. Ltd 2000L beer tanks, previously used as a brite tank but can be used as an FV. Technical Specification: Model - KBBFT1300A. Date of manufacture - 2021. Capacity - 2000 litres. Notes: All 1.5inch Tri Clamp connections other than DIN PRV port on top, manway door, and larger triclamp Njdpfswl H Nijx Aazjdb Features: Port on top for dry hopping etc. 2x thermowells, one for a thermometer at front and one for temp sensor in back & a CIP arm on the RHS, with sprayball.

Condition: used, Year of construction: 2018, REF: MM6441 Ndsdpfsza T Slex Aazeb Wenzhou Jiangbo Dairy Equipment Factory Co. Ltd (Chinese) 5000L stainless-steel tank with agitator. Manufacturer - Wenzhou Jiangbo Dairy Equipment Factory Co., Ltd. Model - DCG. Date of manufacture - 2018. Speed - 36 r/min. Electrical requirements – 415 V / 50 hz / 3 phase.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, REF: MM6424 1 x AL Tech UK Labelling Technologies Ltd high-performance 'print and apply' label applicator with infeed conveyor and Zebra ZE500 printer. Used to apply labels onto the short and long sides of pre-formed cardboard boxes. Manufacturer - ALTech UK Labelling Technologies Ltd. Model - ALritma S. Date of manufacture – 2020. Controls - 40 x programs, controlled by colour 4.3'' touch-screen. Label width - 20 mm to 107 mm wide. Speed - 50 m/minute. Electrical requirements - 110-230 V / 50-60 hz / 1 phase. Ndedpfey Uni Nsx Aazjb Video available on request.

Condition: used, Used biodiesel plant made by Biodiesel Fuels Equipment Ltd UK in 2012 and shut down in 2021. Nsdpfxsyhc Rgs Aazsdb Plant capacity is 10,000 litres/8 hour day up to 25,000 litres/day if run for 24hours. It has been used to process used sunflower and palm oil. Equipment includes: (3) separators, (2) reactors, (2) ionisers, (2) oil preparation vessels, (1) methanol preparation vessel, (1) tank for biodiesel.

Condition: like new (used), Year of construction: 2015, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 5067, total width: 450 mm, total length: 500 mm, input voltage: 220 V, total height: 400 mm, cutting width (max.): 108 mm, number of blades: 2, table height: 600 mm, Equipment: CE marking, Hot & Cold Automatic Strip Cutting Machine Ndjdpfx Aozut Axsazob It can cut elastic, webbing (up to ¼" thick), ribbons, belt loops, hook and loop fasteners, nylon cords, leather, safety belts, rubber, and vinyl. FEEDING SPEED – adjustable up to 13 inches per second. • CUTTING LENGTH – approximately 400 ft. • CUTTING WIDTH – 4 inches. • TOLERANCE – 0.05% of the total cut length. • QUANTITY – up to 99,999 pieces. • COUNTER – pre-set up to 99,999. • SAFETY – knife cover sensor – automatic stop when the roll ends. • AUTO – feed/reverse.

Condition: good (used), 1 x Mono doughnut fryer. model FG059-B02 Ndsdpfx Aoy S Td Hoazjb

Condition: used, functionality: unexamined, type of input current: three-phase, total height: 3,000 mm, total length: 3,000 mm, input voltage: 380 V, type of cooling: water, welding current at 60% duty cycle: 1,000 A, welding current at 100% duty cycle: 800 A, welding current (min.): 250 A, welding current (max.): 1,250 A, Used ESAB submerged arc welding (SAW) system for sale, manufactured by ESAB AB / ESAB Welding Equipment AB, Sweden. The system is designed for mechanized submerged arc welding (SAW), including tandem welding AC/DC. It is suitable for welding long, straight seams, beams, profiles, sheet metal structures, cylindrical products, vessels, tanks, and heavy welded structures. Manufacturer: ESAB AB / ESAB Welding Equipment AB Country: Sweden Process: SAW – Submerged Arc Welding Type: Mechanized welding system / tandem welding system Inscription: UP Tandemschweißen Welding: DC + AC with ESAB power sources Welding head: Available, with flux hopper Work beam / chassis: Long ESAB welding beam / tractor Condition: Dismantled / stored, available for inspection Welding power sources ESAB TAE 800 Parameter Data Model ESAB TAE 800 Range 300 A / 28 V – 800 A / 44 V 100% duty cycle 800 A / 44 V 60% duty cycle 1000 A / 44 V Power supply 400 / 415 / 460 / 500 V, 50 Hz Protection IP23 ESAB LAE 1250 Parameter Data Model ESAB LAE 1250 Type Welding rectifier Range 250 A / 24 V – 1250 A / 44 V 100% duty cycle 1250 A / 44 V Power supply 220 / 380 / 415 / 500 V, 50 Hz Protection IP22 Weight 490 kg Data from the tandem welding plate Mode Current Voltage Direct current / DC 520 – 580 A 28 – 30 V Alternating current / AC 550 – 620 A 34 – 36 V Travel speed: 680 – 800 mm/min. Included components: long ESAB welding beam / chassis; welding head; Ndsdpszimbksfx Aazsb flux hopper; cables and hoses; control boxes; ESAB TAE 800; ESAB LAE 1250; submerged arc welding equipment. Condition: The system is used and is currently dismantled / stored out of active operation. Visible signs of use, dust, dirt, and storage are present. It is sold in its current condition, with the equipment shown in the pictures. On-site inspection and technical verification by the buyer are recommended before purchase.

Condition: used, - Cooking chamber dimensions: 1200x2000 mm Ndodpfx Aowxmn Seazjb - Refurbished equipment: The equipment is prepared upon order, collection and return deadlines are agreed at that time (please ask for the price after refurbishment).

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Label dispensing module for print integration, print module 4L300 thermal transfer printer, belt conveyor, see photos for details. Nodpszn N Nnefx Aazsdb

Condition: good (used), Year of construction: 2014, 2x carton packaging machines, carton erectors, B&E Equipment / I-Pak – used: Price per unit, ex works: only €9,950 (net), with self-dismantling! Ndodpfx Aaszbyn Nszeb Manufacturer: B&E Equipment / I-Pak Type: BA18H Year of manufacture: 2014 Serial numbers: 14/0558 and 14/0557 Each unit includes 1x Nordson ProBlue 4 hot melt adhesive applicator with 4-liter hot melt adhesive Weight: approx. 1,500 kg 400V, 8kW, 15A, 3 phases Condition: good Available: from approximately Q4/2026 Location: Hamburg A video of the machine is available!

Condition: used, Veneer machine Manufacturer: Fischer & Rückle Type: FZR 21 Year of manufacture: 2015 For the most efficient edge gluing of parallel-connected veneer strips into continuous or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued with PVAc or UREA adhesives. This edge feeding joining apparatus is the most economical alternative to longitudinal joining apparatuses for cross-grain applications. Production Approx. 17-20 joints/min. Technical data Veneer strip lengths (grain direction): 350-2150 mm Veneer strip widths (cross-grain direction): 50-600 mm Veneer surface width (cross-grain direction): min. 260 mm Veneer strip thickness: 0.3-1.5 mm Equipment Feeding device for efficient and convenient semi-automatic feeding of veneer strips Panel Automatic for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Features Ndedpfxjzuzpto Aazjb - The Furnimaster-plus has a veneer alignment function (reverse transport movement) - Perfect joining of cut or rotary-cut veneer of all wood species, even with wavy or rippled veneer - Unique, proven horizontal pressing system that results in fully closed, strong glue joints - Solid, robust construction for high durability, reliable and fail-safe operation - Easy operation thanks to touchscreen panel, clear symbols, separate manometers with direct access, etc. - Liftable pressure bars for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Cross cutter For cutting to a pre-set format width (across the grain) directly after splicing. Short widths can be pre-set and measured with the integrated encoder. Larger widths are determined by two photoelectric sensors that are mounted at the required distance from the clipper on the direct stacking device. Direct stacking device DA-12R, belt system For unloading and stacking the veneer surface directly after joining. The joined surfaces are gently unloaded and stacked on this compact direct stacking device without any mechanical impact. Min. veneer sheet length (grain direction): 350 mm Veneer sheet widths (across the grain): 250 - 1200 mm Max. stack height: 500 mm Max. stack width (across the grain) for unloading to the rear end: 1200 mm Note: The technical data and descriptions are taken from the original order confirmation. The data is for informational purposes only and is not binding. Another Fischer & Rückle machine, type: FZR 21, year of manufacture: 2009, is also available.

Condition: good (used), Year of construction: 2014, Cardboard packaging machine, carton erector, B&E Equipment / I-Pak – used: Price ex works: only €9,950 (net), if disassembled by the buyer! Nedpfx Aezbynpoazsdb Manufacturer: B&E Equipment / I-Pak Type: BA20-2 Year of manufacture: 2014 Serial number: 14/0559 Each unit comes with 1x Nordson ProBlue 4 hot melt adhesive applicator and 4 liters of hot melt adhesive. Weight: approx. 1,250 kg 400V, 7kW, 16A, 3 phases Condition: good Available: from approximately Q4/2026 Location: Hamburg A video of the machine is available!

Condition: used, Year of construction: 2009, - Veneer strip lengths (fiber direction): 350-1500 mm - Veneer strip widths (cross-fiber direction): 50-500 mm - Veneer surface width (cross-fiber direction): min. 260 mm - Veneer strip thickness: 0.3-1.5 mm Veneer machine with direct stacking Nedpfxozuz Hls Aazjdb Manufacturer: Fischer & Rückle Type: FZR 15 / DAR 22 Year of manufacture: 2009 Cross-feed splicer For the most efficient cross-gluing of parallel-joined veneer strips into endless or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued, using PVAc or urea adhesives. This cross-feed splicer is the most economical alternative to longitudinal splicers for cross-fiber applications. Production Approx. 17-20 joints/min Technical data Veneer strip lengths (fiber direction): 350-1500 mm Veneer strip widths (cross-fiber direction): 50-500 mm Veneer surface width (cross-fiber direction): min. 260 mm Veneer strip thickness: 0.3-1.5 mm Equipment Feeding device for efficient and convenient semi-automatic feeding of veneer strips. Panel automatic for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Features - Perfect bonding of cut or rotary-cut veneer of all wood species, even with wavy or undulating veneer - Unique, tried-and-tested horizontal pressing system that results in completely closed, solid glue joints - Solid, robust construction for a long service life, reliable and fail-safe operation - Easy operation thanks to screen, clear symbols, separate pressure gauge with direct access, etc. - Liftable pressure beams for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Cross-cutter For cutting to a pre-set format width (across the fiber direction) immediately after splicing. The straight alignment of the veneer must be observed and, if necessary, corrected by pressing a button. When working in endless mode, the required distance to the direct stacking device is set. Direct stacking device DAR-22 For outputting and stacking the veneer surface immediately after splicing or cutting. The spliced surfaces are gently output and stacked without this compact direct stacking device exerting any mechanical forces. Min. veneer sheet lengths (fiber direction): 350* - 1500 mm Veneer sheet widths (across the fiber direction): 260 - 500* - 2200 mm Stack removal from the left, right, or rear Max. stack height: 500 mm *Reliable stack alignment not guaranteed Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Veneer machine with direct stacking Manufacturer: Fischer & Rückle Type: FZR15 / DAR 12 Year of manufacture: 2006 / 2014 Cross-feeding splicer For highly efficient cross-gluing of parallel-joined veneer strips into endless or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued with PVAc or urea adhesives. This cross-gluer is the most economical alternative to longitudinal gluers for cross-grain applications. Production Approx. 17-20 joining points/min Technical data Veneer strip length (grain direction): 350-1500 mm Veneer strip width (cross-grain direction): 50-500 mm Veneer strip thickness: 0.3-1.5 mm Equipment Feed device for efficient and convenient semi-automatic feeding of veneer strips. Plate automation for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Features - Perfect bonding of cut or rotary-cut veneer of all wood species, even with wavy or rippled veneer Ndodpfezuz Hfox Aazeb - Unique, tried-and-tested horizontal pressing system that results in fully closed, solid glue joints - Solid, robust construction for high durability, reliable and fail-safe operation - Easy operation thanks to screen, clear symbols, separate manometer with direct access, etc. - Liftable pressure bars for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Cross cutter For cutting to a pre-set format width (across the grain). The width is determined by two photoelectric cells that are mounted at the required distance from the cutter. Direct stacking device DAR-22 For outputting and stacking the veneer surface directly after splicing. The spliced surfaces are gently outputted and stacked on this compact direct stacking device without mechanical intervention. Min. veneer sheet length (grain direction): 350 mm Veneer sheet width (across the grain): 250 - 1200 mm Max. stack height approx. (small sheets are not perfectly aligned): 500 mm Max. stack width (across the grain) for discharge to the rear end: 1200 mm Note: The technical data and descriptions are a transcript of the original order confirmation. Data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2006, working width: 520 mm, roll width: 520 mm, roll diameter: 1,000 mm, Equipment: documentation/manual, Video below We offer this used ETI Converting Equipment Cohesio ST 520 coater, die cutter, UV silicone coating, flexographic printing press 1 colour, , 11 magnetic cilinders, year of construction 2006. multifunctional equipment that allows self-adhesive materials and labels. linerless 1 flexo 2 hotmelt coating guns (roatating bar, lips + ‘Waterwall”) 3 unwinders Web width of 520 mm E + L webguides at the infeed and between hotmelt and UV printing unit 2 Corona treatments for two unwiders 2 cleaners UV Curing on 1 Flexo units (UV-Ray), which chilling rolls 2 die cutting units Chiller Working hours 9000 Year of production 2006 more information on request Ndjdjyalqyspfx Aazjb If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, Our 400 Ton/Hour Capacity Stationary Crushing and Screening Plant consists of 40 m³ vibrating feed bunker, wobbler feeder, CLK-110 jaw crusher, impact crusher, tunnel systems, stock and return belts, stock bunkers, control cabinet and automation system. The products transferred to the feed bunker are separated from dirt and mud in the first stage of the double-stage wobbler feeder and bypassed by the bypass belt conveyor In the second stage of the wobbler feeder, the products that are suitable for the jaw crusher are sent to the stock area with the transfer belt. The jaw crusher, with a maximum feed of 800 mm, crushes the products and sends them to the fist vibrating screen. In the first vibrating screen, the products are separated in 0-40 mm, 40-90 mm sizes and sent to the stock area. Products above 90 mm size are transferred to the secondary crushing and screening unıt. The products transferred to the tunnel system are sent to the 12-13 S impact crusher. The products crushed in the impact crusher are separated in different sizes by vibrating screen and sent to the stock area. Nedpfxszvxlno Aazjdb The products stored in the stock area are transferred to the pan feeder by passing through the tunnel system according to the need. The vibrating pan feeder transfers the products to the stock bunkers with the transfer belt conveyor All equipment of the crushing &screening plant is controlled from 3 different automation panels.

Condition: like new (used), functionality: fully functional, fuel type: diesel, overall weight: 30,000 kg, Year of construction: 2026, Omega SC4815 Scalper The Omega SC4815 is a heavy-duty tracked scalping screen designed for demanding quarrying, recycling and construction applications. Built around a high-energy 16' × 5' twin-deck screen box, the SC4815 combines aggressive screening performance with high throughput, robust construction and excellent on-site mobility. Capable of processing up to 450 tonnes per hour, the SC4815 features a 7 m³ feed hopper, 1,200 mm belt feeder and three product discharge conveyors for oversize, mid-size and fines. Its hydraulically folding conveyors and walkways allow for fast setup and straightforward transport between sites. Powered by a CAT 3.6 engine, the machine uses a fuel-efficient diesel-hydraulic drive system and is mounted on a heavy-duty tracked undercarriage. At approximately 30,000 kg, the SC4815 is engineered to handle tough materials while remaining practical to transport and manoeuvre on site. Ndodjz Dbccspfx Aazsb Key specifications: 16' × 5' twin-deck screen | Up to 450 TPH | 7 m³ hopper | CAT 3.6 engine or Deutz engine Three-way material split | 30,000 kg operating weight. Omega SC4815 — built for high production, efficient screening and demanding working environments.

Condition: excellent (used), Year of construction: 2014, SMIpack FP870A L sealer and shrink tunnel Sealing bar 870mm x 530mm, conveyor feeds in to the shrink tunnel, shrink tunnel aperture 650mm W x 300mm H, adjustable temp and speed controls, with manuals, mobile, 1Ph and 3Ph Njdpezt Ia Nefx Aazjdb

Condition: like new (used), functionality: fully functional, fuel type: electric, overall weight: 48,000 kg, Year of construction: 2026, The Omega TMC Q250 is a heavy-duty tracked cone crusher engineered for high-capacity secondary and tertiary crushing applications. Designed for demanding quarrying, mining and recycling environments, the Q250 combines a robust cone crushing unit with tracked mobility and an integrated feed and discharge system to deliver dependable production in tough working conditions. Ndedpfoz Dbg Isx Aazjb With an operating weight of approximately 48,000 kg, the Q250 is built around a substantial tracked chassis for stability and durability. In its working configuration, the machine measures approximately 17.8 m in overall length, with the detailed GA drawing showing a maximum overall width of approximately 4.8 m and height of approximately 4.76 m. The integrated tracked design allows the Omega TMC Q250 to be moved easily around the quarry or job site, while its large feed arrangement, cone crusher and product conveyor provide a complete mobile crushing solution.

Condition: new, functionality: fully functional, power: 377 kW (512.58 HP), fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE New Generation FULLSTAR Series Mobile Crushing, Screening and Washing Plants are the most preferred machines in recent years thanks to easy and cost free installation. The first crushing process is performed with Primery Jaw Crusher, we can design with secondary impact crusher or cone crusher for second crushing stage according to the requirements of our customers. Fullstar-60 plant has been projected for the first time in the world by Fabo and provides crushing, screening and as well as to wash 0-5 mm sand at the same time on a single chassis. Our FULLSTAR model operates in closed Crushing circuit system and allows user to obtain 4 different final fractions up to 300 T / S capacity. We are manufacturing Fullstar-90 and 110 models which has 3 functions at the same time by trailed-type 2 chassis with its own tires. FABO FULLSTAR-90 is a mobile type plant which perform crushing, washing and screening operations at the same time. This type of plant is very efficient as it is produced on a single chassis, which reduces both plant operation area and manufacture cost. TECHNICAL SPECIFICATIONS: - Model: Fullstar-90 - Production Capacity: 120-180 Tons Per Hour - 1st Crusher: Primary Jaw Crusher – 900x650mm - 2nd Crusher: Secondary Impact Crusher – Rotor Ø1250x1000 mm - Maximum Feeding Size: 600 mm - Vibrating Screen Size and Deck: 1st Chassis: 1700x4500 mm : 2nd Chassis: 1550x4000 mm(Grizzly) ¬- Screw Washer Size: 600x5000 mm (Twins Helix) - Total Motor Power: 377 Kw - Generator (optional): 450 kvA - Plant Dimensions: 1st Chassis: 18960 x 4070 x 4650mm : 2nd Chassis: 15500 x 4650 x 4400mm FULLSTAR-90 IS A COMBINATION OF: • Bunker(Hopper) • Vibrating Grizzly Feeder(Bypass) • Primary Jaw Crusher • Secondary Impact Crusher • High Stroke Type Vibrating Screen • Screw Sand Washer (Single Helix) Ndsdpfszvfk Djx Aazeb • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: good (used), Code: 0193 Brand: CASATI MACCHINE Model: BIG 3200 - CE Standard Hydraulic two knives veneer pack guillotine shear - CE Standard Description: Sturdy steel made structure, cast iron knife beam. Self-lubrificating prismatic slide-ways The machine allows, with a single operation, to cut the veneer pack on both sides to be trimmed - The simultaneous trimming on two sides of the veneer pack is carried out thanks to the movement at the same time, of two knives, one fitted on a fixed structure and the other one on a moving part - The machine is equipped with an adjustable rear shoulder, as well as with a pressor to clamp the veneer pack during cutting operations. Possibility of working as a single guillotine shear Useful cutting length (as double guillotine shear) mm 3200 Useful cutting length (as single guillotine shear) mm 3550 Ndedpeqzky Ejfx Aazsb Pressore stroke mm 100 Pressor width mm 550 Min width to be cut mm 18 Max width to be cut mm 530 Scrap adjustment field mm 0/50 Photoelectric cells Electronic programmer allowing to program the number of cuts to be effectuated and the relevant width Perimeter protections Total power installed Kw 13, 9 Operating pressure bar 6/7 Overall dimensions mm 5200 x 1700 x 1800 h Weight kg 9000

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Complete Kempner automatic L-sealing, shrink wrapping and labelling system, manufactured in 2024 and in excellent working condition. This system comprises of the following machines: 1 x Kempner automatic L-sealer. Model - ZF-A6345-T. Serial number - 13677. Sealing bars - 560mm x 380mm. Electrical requirements - 220 V / 50 hz / 1 phase. Power - 2.5 kW. 1 x Kempner shrink heat tunnel (electric). Model - ZF-S550. Serial number - 22097. Electrical requirements - 380 V / 50 hz / 3 phase. Power - 12 kW / 27 Amps. 1 x Kempner automatic easy tear label applicator. Model - ZD-L1. Serial number - KL-24022-4. Electrical requirements - 220 V / 50 hz / 1 phase. Power - 2 kW. Nedpfxsyrup Ao Aazodb This system was previously used to pack donuts and was in production for approximately 9 months in total. Manufacturer - Kempner.

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 3/4782, cutting length (max.): 3,500 mm, input current: 8 A, input voltage: 400 V, input frequency: 50 Hz, pneumatic connection: 6 bar, For sale is a well-maintained Langzauner LZ 2/2-3500 veneer saw, manufactured in Austria. The machine is in very good and well-maintained used condition and generally gives a very solid impression. The robust design of Langzauner machines makes this model particularly interesting for professional use in carpentry shops and wood processing companies. Nedpfxoz Ep I Nj Aazsdb Technical data: Manufacturer: Langzauner Maschinenfabrik, Lambrechten/Upper Austria, Austria Type: LZ 2/2-3500 Factory number: 3/4782 Cutting length: 3,500 mm Cutting height: approx. 45 mm Main motor: 3.3 kW Connection: 3 x 400 V / 50 Hz Rated current: 7.5 A Jointing/planing unit: included CE marking: included The LZ 2/2-3500 is a robust industrial veneer saw for the precise cutting of veneers and sheet materials. The included jointing unit also enables the processing or jointing of the edges. The machine can be inspected and tested on-site while powered. An inspection and functional demonstration are possible after prior arrangement.

Condition: excellent (used), Year of construction: 2020, Minipack Torre Replay 55 Evo Shrink wrapping chamber machine Ndedpfjzcg Edox Aazjb 2020, up to 300 products per hour, programmable, max product dimensions 500mm x 380mm x 200mm, 1Ph

Condition: used, Year of construction: 2019, Vaupel Air Tower, manufactured by Gram Filter line with fan Type/Model: FL 52 / VE 5500 / W3 Condition: Used Year of manufacture: 2019 Technical data Ndjdpjzhvvbofx Aazjb Number of filter cartridges: 4 Number of solenoid valves: 4 G102 filter area: 52 m² G105 filter area: 84 m² Compressed air: 30 l/min Dust container: 35 l Weight: 630 kg Dimensions L x W x H: 1400 mm x 1200 mm x 2490 mm