Used Vertical Meat Saw for sale (14,088)

Condition: like new (used), Year of construction: 2009, I sell the vertical band saw Felder Hammer N4400. Motor power 3,0KW Suitable for saw bands up to 35mm. Table tilting. Year 2009 Ledpfxer Alyks Ahzsrg Condition very good. Available immediately.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Cast construction, doors with safety interlocking; coating of conveyor rollers in very good condition; outreach 500 mm; emergency stop (NOT-AUS); Lrsdpfx Asx Dcb Aehzog

Condition: excellent (used), Vertical band saw JAESPA type MSU 4roller diameter 420 mmoutreach 400 mmtable size 615 x 615 mmcutting height 350 mmsaw blade length min. 3450 - max. 3640 mmsaw blade speed 20-2500 m/min. stepless mains connection 400 volt, 50 Hz - stepless saw band speed over 2 motor speeds, 2 gear stages and stepless belt drive - saw table swivelling - 2 gear stages - saw blade butt welding machine IDEAL BS 0-16- saw blade shear - grinding stone for grinding the weld seam space requirement L x W x H 1100 x 950 x 2000 mmWeight approx. 700 kgsehr good, immediately operational condition2 identical machines in stock Lodpfxjd Tx D Us Ahzjrg

Condition: used, No. 3197 Vertical log band saw Bögli 1600 Used, the machine has been continuously maintained and modernized Sawing operation was discontinued in summer 2024 For logs up to 1500 mm in diameter Clamping carriage approx. 7650 mm long, 5 support arms Clamping carriage approx. 3000 mm wide The maximum length that was cut is 8000 mm Cutting capacity averaged 55 - 70 solid cubic meters per 8.5 hours 2 core cut-off saws Drive motor 55 kW, 1460 rpm Roller diameter 1600 mm Saw blade maximum width 205 mm, length 10560 mm, thickness 1.65 mm Hydraulic unit replaced in 2007 Chip carriage rollers and shafts replaced in 2011 The system was operated by 3 people Operator cabin with remote control and video surveillance Space requirement approx. 25000 x 10000 mm LW Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without disassembly, transport and assembly Disassembly, loading and transport by us optionally possible Errors in the description and price reserved In order to avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Lsdpfsvvm Iuex Ahzorg Technical data, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as viewed” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: excellent (used), Year of construction: 2011, Vertical Wood Band Saw PROMAC SW-430 Throat depth: 400 mm Table size: Depth 600 mm x Width 430 mm Tilting table from 0 to 40° Blades dimensions: Length 3330 x 15 mm x thickness 0,6 mm Maxi cutting height: 200 mm Steering wheels diameter: Ø 430 mm Voltage: 380 V Motor: 1,5 kW Width: 800 mm Depth: 900 mm Height: 1900 mm Weight: approx 150 KG Lrjdpfx Aexyd Szjhzsg Year of construction: 2011 (machine in very good condition) Supplied with 2 spare blades

Condition: excellent (used), Vertical bandsaw in technically excellent condition, featuring a robust construction and high cutting capacity. Ideal for precise cuts even on larger workpieces. Technical data: • Flywheel diameter: 600 mm • Flywheel speed: 820 rpm • Motor power: 3 HP / 2.2 kW • Cutting height: 370 mm • Cutting width: 580 mm • Table size: 600 × 875 mm • Blade length: 4,520–4,600 mm (blade width 35 mm) • Extraction port: 2× Ø120 mm • Machine dimensions (L×W×H): 1000×790×2000 mm • Weight: 280 kg Condition: – Technically tested and fully operational – Ready for immediate use – Operating video available upon request – Inspection possible at any time Shipping available! Lrjdpfxjxxxt Re Ahzsg

Condition: used, functionality: unexamined, machine/vehicle number: 1205, input voltage: 380 V, Used Holz-Her 1205 Vertical Panel Saw – Wall Saw – Panel Saw with Saw Blade Ledpfxoxiwvlj Ahzjrg Manufacturer: HolzHer Model: 1205 Cutting range: 445 cm width, 175 cm height Voltage: 380 volts.

Condition: used, roll diameter 500 mm throat 490 mm workpiece height 220 mm table-size 600 x 600 mm saw band length 3350 mm turning speeds 12 - 1900 m/min total power requirement kW Lsdpfx Asqux Syohzerg weight of the machine ca. 0,4 t dimensions of the machine ca. 1,2 x 0,8 x 1,95 m Band saw with - swivel table - Footswitch - Machine light - IDEAL welding device

Condition: new, Wheel diameter 400 mm Cutting height 200 mm cutting width 350 mm Motor output 1,5 kW Table dimensions 400 x 500 mm Table tiltable 45 Grad saw band length 2950 mm machine weight ab. 150 kg Dimensions (L/W/H) 700 x 600 x 1800 mm wood band saw Thanks to the heavy cast-iron table, the wood band saw offers good stability. The machine has a longitudinal guide and a miter guide and is supplied with a Lsdpfeu Imncox Ahzerg saw band.

Condition: used, Year of construction: 1975, roll diameter 440 mm throat 420 mm Lodpfx Ahevu Hb Ejzorg workpiece height 200 mm cutting speed 20 - 1550 m/min table surface area 560 x 560 mm band length 3250 mm total power requirement 1,5 kW weight of the machine ca. 0,8 t dimensions of the machine ca. 1,2 x 0,8 x 2,1 m Bandsaw with - Saw blade welding unit - Grinding stone - Saw bands - documentation

Condition: used, Year of construction: 1984, roll diameter 420 mm throat 400 mm workpiece height 255 mm table-size 550 x 550 mm saw band length 3200 - 3400 mm turning speeds 20 - 150 m/min total power requirement 1,5 kW weight of the machine ca. 0,6 t dimensions of the machine ca. 1,2 x 0,8 x 2,0 m Band saw with Ledpfjw Tdwxjx Ahzerg - swivel table - Machine light - IDEAL welding device

Condition: like new (used), Year of construction: 2008, SPECIFICATION KB-45 Cutting capacity 455mm Maximum working height 255mm Table 600 x 500 mm Tilt 4 ways up to 15° Saw blade length 3490mm Saw blade width 3-16mm Saw blade speed 25-115m/min Butt welder capacity 3-16mm Motor size 1HP Weight 285 Kgs Height 2020mm Width 1100mm Lsdpfx Asu Rdr Rjhzjrg Depth 660mm STANDARD FEATURES Overload switch Single-phase / 3-phase supply Built-in saw blade and tire cleaning brush Saw blade welder, blade shear and grinder Slotting table Low-voltage halogen lamp Mitre guard for angled cuts Quick rip fence for straight cuts

Condition: like new (used), Year of construction: 2016, machine/vehicle number: 306533, Machine Specifications Technical Specifications Machine length: approx. 1850 mm Machine width: approx. 1200 mm Machine height: approx. 2300 mm Machine weight: approx. 550 kg Idler pulley diameter: 630 mm Tool dimensions: 13 x 0.65 x 24 TPI Saw blade length: 4700 mm Loading height: 1065 mm Cutting height: 350 mm Cutting width without width stop: approx. 610 mm Cutting width with stop: 150 mm Motor power: 0.75 kW Cutting speed: 10 - 100 m/min Table travel: approx. 600 mm Table feed speed: 0.03 - 0.3 m/min Lsdpfxswm Du Eo Ahzjrg Extraction connection diameter: 1x Ø 120 mm + 1x Ø 100 mm Required flow velocity: min. 25 m/s Required volume flow: 1725 m³/h Electrical connection Operating voltage: 400 volts / 50 Hz Current type: 3 x 400 volts Fuse protection: max. 16 amps Minimum cross-section: 1.5 mm²

Condition: excellent (used), Year of construction: 2000, roll diameter 420 mm throat 400 mm workpiece height 280 mm saw band length 3200 - 3400 mm table - swivable +/- 20 ° Lredpfx Ahsxcp Sfjzsg table surface area 600 x 600 mm table - tiltable +/- 45 ° total power requirement 1,7 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 1 x 0,7 x 1,9 m

Condition: used, machine/vehicle number: 40220, throat: 750/430 mm roller-Ø: 350 mm passage height: ca. 230 mm table size: 520 x 520 + 480 x 250 mm band speed: 50 - 300 feed/min engine: 380 V, ca. 1,5 kW space needed: 1730 x 880 x 1800 mm Lredpfx Aoclmy Hshzog weight: ca. 500 kg

Year of construction: 1984, condition: used, machine/vehicle number: 25 948, throat: 485 bzw. 1050 mm Lodpfxjb N Eh Hj Ahzerg roller-Ø: 500 mm passage height: 380 mm table size: Arbeitstisch 780 x 800 mm sawing band length: ueber 2 Laufraeder 3920 - 4050 mm sawing band width max.: 20 mm band speed: 15 - 940 m/min engine: 380 V, 4 kW space needed: 950 x 2130 x 2100 mm weight: 1740 kg

Condition: used, Year of construction: 2001, Used STRIEBIG STANDARD III type 6220A vertical panel saw maximum cutting area: 5300 x 2200 mm blade diameter: 300 mm (min. 290) motor power: 4.4 kW Lrodpfx Asxyyh Eehzog motor speed: 4750 rpm CE compliant

Condition: used, Cutting length 4300 mm Cutting height 2150 mm automatic , ELCON precision panel saw type D 215 ----- Cutting height: vertical 2,150mm, horizontal 2,100mm Cutting length: 4,300mm ----- Technical description: Cutting depth: max. 60mm Saw blade outlet behind the plate: max. 25mm Saw blade: diameter 250mm, bore 30mm, Z=48 hollow roof tooth Saw blade rotation: 5,100 rpm. Motor: 4 kW (S 6) Measurement reading for: horizontal saw cuts: via scale and strip cutting stop vertical saw cuts: above scale Extraction nozzle: 100 & 80mm Required air pressure: 6 bar Features: -Material support with 1 roll per meter of cutting length, switched on and off by foot pedal suspendable -1 infeed and outfeed roller -pneumatically yielding slatted frame -Central support, 1 support element per meter of cutting length, individually manually fold out -Scoring system: double cut of the main saw blade - Torsion-free, free-standing machine frame -Two folding stops for vertical saw cuts (above and below the middle support) ----- Special price "Partnership Edition" ex works in this version: on request! ----- plus pre-freight, freight, installation and instruction (if the machine does not have to be dismantled) Applies only within Germany. Unloading and cross transport to Installation location is determined by the customer. Price: EUR 1,900.00 plus statutory VAT ----- Options with extra charge: Cutting length 5,300mm instead of 4,300mm Order number: ELCO0075/O049 Surcharge: EUR 2,590.00 plus statutory VAT ----- Ledpfx Ahji Hc S Djzerg Technical information according to the manufacturer - without guarantee!

Condition: used, Year of construction: 1996, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 272 / 9-604, cutting length (max.): 4,300 mm, cutting height (max.): 2,200 mm, main saw diameter: 300 mm, total width: 5,700 mm, The machine is used and in good overall condition. It is fully functional. It has only been used occasionally as needed (not daily) in the advertising technology sector. Cutting length: 4300 mm, cutting height: 2200 mm, motor power: 5.5 kW, equipped with Super Cut scoring unit, saw blade: 300 mm. IMPORTANT: The saw is available for demonstration. The technician who installed the saw can, if required, assist with dismantling for an additional fee. Lrodew I Er Topfx Ahzog

Condition: new, Year of construction: 2019, functionality: fully functional, I am offering a new, originally packaged saw for sale. Lrsdpfx Aewxr Dxohzeg

Condition: used, Miter left 60° + right 45° Hydropneumatic control of the saw unit Electropneumatic material feed unit Lsdpfx Aexfr Nljhzerg Smooth-running, high-performance worm drive with a large gear ratio, integrated into a robust cast housing for optimal cutting results Clamping fixture with double clamping arm for burr-minimized cuts, additionally featuring a lateral quick-shift for miter changes Precision prism guide for the gearbox head, laterally adjustable Especially stable base frame with integrated automatic cooling and large chip drawer CNC control: By entering various parameters such as quantity and material length, the CNC version is the ideal solution to optimize workflows.

Condition: good (used), Table size: 900x900mm Projection: 630mm Lrjdelgvk Aepfx Ahzsg

Condition: used, Year of construction: 1977, roll diameter 320 mm throat 310 mm workpiece height 230 mm table-size 505 x 505 mm cutting speed 12 - 375 m/min turning speeds U/min saw band length 2 mm voltage 400 V total power requirement 1,3 kW weight of the machine ca. 420 kg dimensions of the machine ca. 0,80 x 0,80 x 1,65 m - serial-no.: 22600-77/14 - with stepless feed - welding equipment IDEAL Lrsdpfxovnv S Tj Ahzjg - grinding wheel - machine lamp

Condition: excellent (used), functionality: fully functional, saw drive: 3,000 W, Holz-her 1220 automatic vertical panel saw. Multiple adjustment options, capable of cutting half or full sheets. Can be tested, operates well. Ljdpfx Aex Eyqyohzorg

Condition: used, Year of construction: 2013, Vertical Band Saw SYDERIC SRF 25-40 Table size: 600x 550 mm Year of construction: 2013 Throat depth: 396 mm Weight capacity on table: 240 kgs Blades dimensions: Max length 3230 mm x Max Width 2-16 mm Blade speed variation: 22 to 920 m/min Work heigtht: 255 mm Motor power: 1,5 KW - Tri 400 V Wheels diameter: Ø 408 mm Table tiltling left/right: 12° / 15° Table tiltling forward/backward: 8° Speed variator for blade rotation Electronic display Supplied with 2 spare blades Equipped with one blade welding system Lrsdpsxpvw Iofx Ahzeg Voltage: 380 V Dimensions (L x W x H): 1000 x 900 x 1800 mm Weight: approx 500 kg