Used Vertical Turret Lathe for sale (12,490)

Condition: new, Year of construction: 2026, control Siemens Sinumerik 828 hydraulick chuck 812mm Nodpfjd I Ip Iox Ah Uowr max. swing diameter 1250mm max. turning diameter 1150 mm

Year of construction: 2010, condition: reconditioned (used), Technical characteristics SC 1400 CC:  Plate diameter 1250 mm  Maximum turning diameter 1400 mm  The maximum height of the part under the crossbar 1000 mm  Maximum weight of the part on the plate 6000 daN  Stroke of the right vertical slide 800 mm  Side slide stroke 650 mm  Plate rotation speed 5-250 rpm  Range of working advances 0.05-5 mm/rot  Machine weight 15500 daN  Machine dimensions (L x W x H) 4060 x 4450 x 3900 mm Nedsihczyepfx Ah Uewr The vertical lathe SC 1400 CC - SIEMENS, is built with a monobloc hammer made of special alloyed cast iron, type MECHANITE. The mobile crossbar has rectified horizontal guides. The lathe is equipped with a vertical support with a revolver head for 5 tool holders and a side support. The main drive is provided by a 3-speed gearbox (transmission ratios 1:9, 1:3, 1:1) continuously adjustable, which is driven by a 75 KW electric motor and a SIMOREG electronic variator from SIEMENS. The work and fast advances of the vertical support on the X and Z axes are realized by transmission with ball screws from STAR REXROTH and electromagnetic couplings TELCOMEC ITALIA. The hydraulic unit is mounted on the drum and provides the following functions: - Automatic gear change (1:1; 1:3; 1:9) - automatic lubrication of the gearbox - dynamic balancing of the vertical support - locking and unlocking of the mobile crossbar on the baton guides The hydraulic components of the power plant are imported from ATOS ITALIA. The centralized lubrication systems from the crossbar and work supports are made with AZETA ITALIA components. The stroke limitation and safety systems are made with microswitch blocks from EUCHNER - GERMANY, which perform the following functions: - stopping at a fixed rate with confirmation in the rate display - protection against collisions and damage limits For turning flat surfaces at constant speed, the electrical equipment is provided with the function V = K of cutting at constant speed. The electrical panel and the mobile control desk are made with SIEMENS, EATON, SCHNEIDER components. The machine is automated with a programmable SIMATIC PLC S 7-300 from SIEMENS. Display of dimensions with measuring rulers for the vertical support and the lateral support for 2 + 2 axes.

Condition: good (used), Max. turning diameter: 1100 mm Faceplate turning diameter: 800 mm Maximum turning height over faceplate: 900 mm Max. table load: 2000 kg Maximum total cutting force at a diameter of 700 mm: 3400 kg 12 faceplate speeds: 12 - 200 rpm Number of feeds, horizontal and vertical: 8 Feed size, horizontal and vertical: 0.069 – 2.6 mm/rev Rapid traverse of slides: 2500 mm/min Drive power: 15 kW Nedpfjxamgzex Ah Uewr Dimensions (L x W x H): 2300 x 2100 x 2900 mm Weight: approx. 7,500 kg Accessories / Special Features: • 2-axis digital readout (new in 2024) • 5-position star turret • Emergency stop button • Chip guard for faceplate Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: not inspected (used), Year of construction: 1986, functionality: unexamined, 2 machines as spare parts donors. Servomotors MAIN SPINDLE MOTOR CHIP CONVEYOR CHUCK HYDRAULIC UNIT PRICE per ton Nwodpfx Aoixtm Noh Uor

Condition: excellent (used), Year of construction: 2013, Control: SIEMENS Sinumerik 840D sl Working Area Max. workpiece height: 200 mm Max. workpiece diameter: 250 mm Max. turning diameter: 390 mm Max. distance spindle stop – turret: 580 mm Min. distance spindle stop – turret: 240 mm Spindles Max. spindle speed: 5,500 rpm Spindle power per spindle: 37.7 kW Max. spindle torque per spindle: 300 Nm Spindle nose with short taper (DIN 55026): A6 Axis Travel X-axis travel (in working area with cover closed): 365 mm Total X-axis travel: 886 mm X-axis travel (over turret center): -20 mm Nsdpfjw Hx Akox Ah Uowr Y-axis travel: +100/-80 mm Z-axis travel: 250 mm 12-position disk turret VDI 40

Year of construction: 1978, condition: ready for operation (used), A Dörries CNC vertical turning lathe is available. Faceplate diameter: 1600mm, turning diameter: 1800mm, turning height: 1500mm, max. travel: 1200mm, faceplate speed: 200rpm. Machine dimensions X/Y/Z: approx. 8400mm/4500mm/5300mm, weight: approx. 25000kg, control system: R&D. The machine’s electrical system and control were completely overhauled in 2010 by R&D Steuerungstechnik. Documentation available. An on-site inspection is possible. Nedpfx Aoxq Ex Dsh Ujwr

Condition: new, Year of construction: 2026, Siemens control Hydraulic chuck diameter: 610 mm Max. swing diameter: 950 mm Max. turning diameter: 850 mm Max. turning height: 800 mm Max. workpiece weight: 1800 kg Working travel (X axis): 800 mm Vertical travel (Z axis): 880 mm Chuck speed range: 50-1800 rpm Max. rotation speed of driven tools: 3000 rpm Njdpfoc Ryursx Ah Uowr Rapid traverse – X axis: 20 m/min Rapid traverse – Z axis: 20 m/min Automatic tool changer, 16 positions in the magazine Taper: SK50 Worktable drive: 37 kW Driven tool drive: 7.5 kW (option 11 kW) Total connected load: 60 kVA Space requirements (LxWxH): 4300x2450x4450 mm Net machine weight: 18,000 kg Fixed ram on a movable crossbeam Tool changer outside the working area Spindle with taper clamping

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, turning height: 1,700 mm, workpiece weight (max.): 10,000 kg, turning diameter over cross slide: 2,040 mm, turning diameter: 2,000 mm, feed length X-axis: 2,000 mm, feed length Z-axis: 1,661 mm, faceplate diameter: 1,600 mm, feed rate Z-axis: 3 m/min, total height: 6,177 mm, total width: 5,638 mm, total length: 3,937 mm, rapid traverse X-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, type of input current: AC, rotational speed (max.): 258 rpm, rotational speed (min.): 1 rpm, torque: 16,070 Nm, table load: 10,000 kg, table diameter: 1,600 mm, year of last overhaul: 2024, Equipment: rotational speed infinitely variable, - CNC unit (FANUC 32i-A) - Automatic tool exchange unit (ATC) Use Pot quantities (18 Pot) For the linear cutting Standard tool holder Tool holder for the linear cutting - Chuck - Cutting oil Tank - Air Gun unit - Tool & Bed washing unit - Splash guard (Splash guard) - Hydraulic unit - Axis Slide Cover Nwjdpfx Aeulk D Ish Uer - Working lamp - warning lamp - Ladder and Hand Rail - Tool box for the standard maintenance - Manual MPG - Chip Conveyer

Condition: good (used), Year of construction: 2004, Table diameter: 1220 mm Max. turning diameter: 1500 mm Table speed range: 4.5 to 100 rpm Nwsdpfx Ahjxg Nmko Uer Feed range: 0.127 mm to 6.35 mm per revolution Maximum height under crossrail: 900/1200 mm Slide travel (X-axis): 1000 mm Main drive motor: 41 kW Tool changer: 30 positions Accessories: - 8 clamping jaws - 30 tool holders with full enclosure - Oil mist extraction

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 7-41 5157 40, The Pittler PCC vertical lathe, serial number 7-41 5157 40, was built in 1999 and corresponds to the PV SL 1/1-1 model. This CNC-controlled vertical lathe is designed for the precise machining of workpieces up to 300 mm in diameter. Technical specifications of the PCC Pittler Max. turning diameter: 300 mm Travel: X-axis 920 mm / Z-axis 250 mm C-axis: available Chuck diameter: 250 mm Spindle speed: 28–7000 rpm Spindle power: 23–29 kW Max. torque: 150–188 Nm Spindle bore: 60 mm Tool turret: 8 positions Control system: Siemens Sinumerik 840D Coolant and chip conveyor: integrated Machine weight: approx. 6.5 tons Connected load: 54 kVA at 400 V / 50 Hz This machine is designed for automated operation and is particularly suitable for machining small to medium-sized workpieces with high precision. Nwedpfswlaqysx Ah Usr Availability and further information: Several machines of this type, built in 1999, are currently available, including those with the machine numbers 7-41 5157 35 and 7-41 5157 36. These are located in Germany and are in good used condition.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Z-axis: 700 mm, turning diameter: 140 mm, turning height: 380 mm, turning diameter over bed slide: 250 mm, TECHNICAL DETAILS Turning diameter: 140 mm Swing diameter: 250 mm Turning height: 380 mm Travel paths Nsdexf A Npjpfx Ah Uewr Travel - X axis: 300 mm Travel - Z axis: 700 mm Spindle Spindle speeds: 1 - 6,000 rpm Drive power 40% duty cycle: 38.00 kW Spindle nose: DIN 55026 - size 6 Spindle bore diameter at front bearing: 110 mm Feed & Rapid Traverse X-axis feed rate: 1 - 30,000 mm/min X-axis rapid traverse: 30.00 m/min X-axis feed force: 9,000 N Z-axis feed rate: 1 - 40,000 mm/min Z-axis rapid traverse: 40.00 m/min Z-axis feed force: 10,000 N Tools Number of tools in turret 1: 11 Number of tools in turret 2: 11 Toolholder: VDI 40 MACHINE DETAILS Control: SINUMERIK 840D Total power requirement: 70.00 kW Machine weight: approx. 22.00 t Space requirements: approx. 5.80 x 8.60 x H3.80 m EQUIPMENT Chip conveyor Extraction unit Infeed and outfeed Reversing gripper

Condition: good (used), turning height: 1,500 mm, workpiece weight (max.): 20,000 kg, turning diameter: 2,400 mm, Manufacturer: VIPER Type: VTL 20/24 M Control: Fanuc Oi-TD Year of construction: 2008 X Stroke 1835mm Nedpfov R Di Ssx Ah Uewr Z Stroke 1000mm Table load 20 Ton Ram size 230 x 230 mm Stroke cross rail 800 mm Stroke crossrail in 5 steps each 200 mm Live tools 2000 rpm Power live tools 15 kW ATC 18 station max L = 450 mm Taper BT50 BIG PLUS Full C-Axis 360,000 Under power in AEROSPACE precision plant 2020 Table bearing replaced 2020 Ram bearing replaced 2025 new chip conveyor Specifications Metric US standard Max. turning diameter 2400mm Table diameter Ø 2000 mm Tool changer 18 Speed 200 rpm Power 48 kW Max. turning height 1500 mm C-axis 360,000 ° Dimensions (estimate) Length 9,300 mm Width 6,300 mm Height 6,700 mm Weight 48,000 kg Please note: The information on this page has been obtained to the best of our knowledge and belief, and where possible, from the manufacturer. The information is provided in good faith, but its accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contractual terms. We recommend that you check all important details.

Condition: good (used), Year of construction: 2006, machine/vehicle number: 66078, TECHNICAL DETAILS Control: SIEMENS SINUMERIK 840 Speed: 5,500 rpm Swing diameter: 260 mm X-axis travel: 626 mm Z-axis travel: 250 mm Spindle bearing diameter: 32 mm Nominal speed: 1,200 rpm X-axis rapid traverse speed: 60 m/min Z-axis rapid traverse speed: 30 m/min Turret positions: 12 MACHINE DETAILS Machine length: 1,685 mm Machine width: 2,400 mm Nodpfx Ahewfdddj Uswr Machine height: 2,850 mm Machine weight: 8 t EQUIPMENT - Spindle head with short taper DIN 55026: A6 - WPS pallet conveyor - KNOLL system (2010) - SAUTER turret (12 places) - Documentation available

Condition: used, _____ Description: Year of manuf. : 2008 Control : Fanuc 18i-TB Turning diam. : 130 mm Turning length : 110 mm Nsdpfx Aewkcldeh Uswr In Generel: Year of manufacture:2008 Control system:Fanuc 18i-TB Turning diameter:130 mm Turning length:110 mm Rotation diameter:200 mm Workpiece height max.:110 mm Spindle: Technology:Motor spindle Speed:7,500 rpm Power:24 kW Torque:158 Nm C-axis:0.001° Clamping cylinder:Full clamping cylinder Tool carrier (X/Z): Technology:Star turret Number of stations:12 Tool holder:VDI 40 Tool drive:6,000 rpm, 40 Nm X-axis:400 mm Z-axis:200 mm Equipment: Measuring systems:Direct (glass scales) Chip disposal:Chip conveyor Coolant supply:High-pressure pump Automation:Circulating workpiece storage Emulsion mist extraction:Mechanically prepared

Condition: good (used), Year of construction: 2003, operating hours: 41,852 h, Workpiece Specifications: Max Swing Diameter: ~2500 mm (98.4 inches) Max Turning Height: ~2000 mm (78.7 inches) Max Workpiece Weight: ~10,000 kg (22,046 lbs) (depending on configuration) Spindle Specifications: Spindle Drive Power: ~50 kW (67 hp) (approximate, depending on model) Spindle Speed Range: ~10-500 rpm (variable, depending on model) Spindle Taper: Typically a large taper suitable for heavy-duty turning. Table Specifications: Table Diameter: ~2500 mm (98.4 inches) Table Load Capacity: ~10,000 kg (22,046 lbs) Axis Travel: X-Axis Travel: ~2000 mm (78.7 inches) Z-Axis Travel: ~2000 mm (78.7 inches) Tooling: Tool Holder Type: Typically VDI or similar heavy-duty tool holders. Number of Tools: Depending on the turret configuration, typically 12 or more tools. Accuracy: Positioning Accuracy: ~0.01 mm (0.0004 inches) Repeatability: ~0.005 mm (0.0002 inches) Dimensions and Weight: Machine Weight: ~30,000 kg (66,139 lbs) (approximate) Machine Dimensions: ~5000 x 4000 x 4000 mm (196.9 x 157.5 x 157.5 inches) (approximate) Additional Features: Coolant System: High-pressure coolant system for efficient chip removal and cooling. Automation: Optional automation systems for loading/unloading of workpieces. CNC Control: Advanced CNC control for complex machining tasks. Nwsdpfx Ahjvy Ti He Ujr

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 06800001511, Used: CNC vertical lathe Nodpfxswzk D As Ah Uowr Manufacturer: DMG/ GILDEMEISTER Model: CTV250 Year of manufacture: 2003 Serial number: 06800001511

Condition: good (used), clearance 88mm diameter of rotation without chuck 1000mm with chuck 700mm machine dimensions: l2500mm x w1400mm x h1540 Nwedpfxow Rch Re Ah Uer rpm 11.2 / 1000rpm automatic feed on X and Z axis

Year of construction: 2007, condition: good (used), Make: Okuma Type: LVT-300 M Control: OSP-P200L Year: 2007 X Travel 210 Z Travel 360 Power 22 kW Driven live tools 7.5 kw / 3000 Rpm In feed table Out feed table Package jaws Package tool holders Chip conveyor Nwodpfx Ajku Aaash Uer Coolant system 9 Bar Grundfos Specifications Metric US Standard Max. turning Ø 280 mm Table Ø 210 mm Horizontal movement support 360 mm ATC / revolver 12 Speeds / ranges 4000 Rpm C-Axis 360000 ° Dimensions (Estimate) There are no dimensions for this machine (yet). Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1979, Single column vertical turning lathe BERTHIEZ TM500 SP, as follows: Manufacturer: Berthiez (France) Model: TM500 SP Year of manufacture: 1979 Main technical data: Nwjdpfx Aex A U Rajh Uer Table diameter: 6300 mm Maximum turning diameter: 15000 mm Maximum usable height: 4000 mm Arm travel: 3600 mm Main motor power: 100 kW Maximum allowable load on faceplate: 80 t Ram size: 360x360 mm Machine weight approx. 230 tons The machine can perform both turning and milling operations. Do not hesitate to contact us for any additional information.

Condition: good (used), Year of construction: 1996, 1 x automatic lathe MAS A 40 CA Year of construction: 1996 The machine can be inspected under power. Nsdpetpn Thefx Ah Ujwr

Condition: excellent (used), Year of construction: 1999, Control: Siemens Sinumerik 840D Working range: max swing diameter: 300 mm Main spindle: minimum spindle speed: 28 rpm maximum spindle speed: 7000 rpm maximum torque: 188 Nm turning diameter: 1250 mm swing diameter: 1160 mm turning height: 800 mm faceplate diameter: 1000 mm Nwsdevvmkiepfx Ah Uer

Condition: ready for operation (used), Year of construction: 2015, operating hours: 15,050 h, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 200 mm, spindle speed (max.): 7,500 rpm, turning diameter: 220 mm, turning height: 175 mm, TECHNICAL DETAILS Turning diameter: 220 mm Swing diameter: 270 mm Turning height: 175 mm Control & axis travel Control: SIEMENS 840 D SL X-axis: 660 mm Y-axis: 300 mm Nwjdpexf Apvofx Ah Ujr Z-axis: 200 mm Spindle & tool change Max. speed: 7,500 rpm Tool changer: 12-station MACHINE DETAILS Total power requirement: 24 kW Machine weight: approx. 5.2 t Space requirement: approx. 2.5 x 1.6 x 2.3 m

Condition: ready for operation (used), Year of construction: 1997, Model: TG20/2500 CNC: SIEMENS 840 C Turning diameter: 2500 mm Table diameter: 2000 mm Turning height: 2000 mm Max. table load: 20,000 kg Max. table speed: 2–250 rpm Number of speed ranges: 4 Table motor power: 60–100 kW Z-axis travel: 1,500 mm Ram section: 250 x 250 mm Rapid traverses: 10,000 mm/min Milling speed: 0–4,000 rpm Milling motor power: 37 kW Driven tools Njdjxwp D Dopfx Ah Uswr

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 103342, travel distance X-axis: 850 mm, travel distance Z-axis: 315 mm, spindle speed (max.): 3,400 rpm, turning diameter: 340 mm, TECHNICAL DETAILS Nwsdpfov T U T Hsx Ah Usr Turning diameter: 340 mm Swing diameter: 420 mm Turning height: 315 mm X-travel: 850 mm Z-travel: 315 mm Control: Siemens 840 DSL Spindle Spindle speeds (infinitely variable): 0 - 3,400 rpm Main motor power: 37 (48) kW Feed Feed range in X-direction: 0 - 45 m/min Feed range in Z-direction: 0 - 30 m/min Tool Tool system: 12-station turret head Tool drive power: 19 kW Tool speeds: 0 - 6,000 rpm MACHINE DETAILS Total power requirement: 60 kW Machine weight: approx. 12 t Space requirement: approx. 3.7 x 3.1 x 3.3 m EQUIPMENT - CNC vertical lathe - Automatic workpiece feed

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 101331, travel distance X-axis: 300 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 5,000 rpm, turning diameter: 140 mm, turning length: 630 mm, TECHNICAL DETAILS Max. turning diameter: 140 mm Chuck swing diameter: Ø 250 mm Turning height: 630 mm Control: SIN840 PL Spindle Spindle speeds: continuously variable 1 - 5,000 rpm Nwsdpfsxf An Sox Ah Uor Drive power (40% duty cycle): 38.00 kW Spindle head: according to DIN 55026 - size 6 Spindle diameter in the front bearing: 110 mm Axes X-axis travel: 300 mm X-axis feed: 1 - 30,000 mm/min X-axis rapid traverse: 30.00 m/min X-axis feed force: 9,000 N Z-axis travel: 700 mm Z-axis feed: 1 - 40,000 mm/min Z-axis rapid traverse: 40.00 m/min Feed force Z-axis: 10,000 N Tool turret Number of tools in turret 1: 12 Number of tools in turret 2: 12 Tool holder: VDI 40 DIN 69880 MACHINE DETAILS Total power requirement: 70 kW Machine weight: approx. 25 t Space requirement (L x W x H): approx. 6.8 m x 4.7 m x 4.3 m EQUIPMENT - Chip conveyor - HYFRA spindle air conditioning unit - Knoll coolant system