Used Vulcanizing Press for sale (12,276)

Condition: used, Model: PHP 80 Manufacturer: SCMB (Licence BLISS) Serial number: 91-955 Mechanical characteristics: - Max force: 800 kN - Max stroke: 1600 mm - Distance between table and ram: 2500 mm - Ram base dimensions: 3230 x 2000 mm - Table dimensions: 3230 x 2000 mm - Table height from floor: 400 mm Drive system: - Main motor power: 22 kW - Motor speed: 1500 rpm Njdpfxew Ec Stj Afhewb Motion speeds: - Rapid approach speed: 100 mm/s - Working speed: 23 mm/s - Return speed: 39 mm/s - Max return force: 470 kN APPLICATION OF THE SCMB PHP 80 HYDRAULIC PRESS Heavy-duty hydraulic press designed for forming, deep drawing, bending, or assembling large-scale components. Suitable for industrial processes requiring long stroke and wide tooling surface. FEATURES / DIFFERENTIATORS – SCMB PHP 80 - Long 1600 mm stroke suitable for deep-forming tasks. - Large working surface (3230 x 2000 mm) on both table and ram. - Separate speeds for approach, forming, and return for optimized cycle time. - High return force (470 kN) allowing return under load conditions.

Condition: reconditioned (used), functionality: fully functional, Press Brake Brand: HACO Capacity: 3000 x 135T Distance between uprights: 2600 mm Throat depth: 250 mm Ram stroke: 120 mm Opening: 325 mm Descent speed: 10 mm/s Nwedpeyapdqsfx Afheb Working speed: 10 mm/s Return speed: 60 mm/s Table height: 915 mm Hydraulic power unit: 10 HP Without pit Supplied with AMADA PROMECAM tooling Backgauge with digital display Weight: 8T Equipped with new tooling

Condition: not inspected (used), Year of construction: 1965, functionality: unexamined, machine/vehicle number: 103/65, total height: 2,750 mm, table width: 500 mm, table length: 400 mm, pressing force: 110 t, For sale: Weingarten mechanical press 110 ton. This press is from Maschinenfabrik Weingarten A-G and was built as a robust industrial press. The machine was originally always a direct drive press. At a later stage, a conversion to a trimming press was started, but this project was never finished. As a result, the press has been out of operation for several years. The basic structure of the press is still in good condition. Specifications (according to nameplate): Brand: Weingarten Type: P125 Press force: max. 110 tons Ram stroke: min. 100 mm – max. 300 mm Year of manufacture/delivery: 24-02-1965 Serial number: 103/65 Condition: used, project not completed. Nsdpfx Aeybz Svefhswb

Condition: ready for operation (used), Year of construction: 2010, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2010 Pressing force: 532 kN Voltage: 400 V Maximum bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Nwedpfxsyap I Aj Afhsb Filling opening dimensions: 19.5 x 65 x 111.5 cm Condition: very good! Functionality checked. FLITS Rental & Sales service: with every machine we include a bundle of baling wire (120 wires). Do you require additional bundles of baling wire? Please request a complimentary quote. At FLITS Rental & Sales, you choose speed, transparency, and reliability. We think along with you, respond immediately, and ensure you quickly receive the right machine. You are very welcome to view the machines at our premises. We are located at Schoterlandseweg 94, 8413NE Oudehorne. Visits are by appointment, so we can take the time to advise you thoroughly and present the most suitable machines. We are happy to assist you! Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile baler Waste processing

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Vemag Robot 500 + Vemag Charging head w. rotary valve and Vemag manual filling head 806. All off the equipment from 2019 and in condition like new! Njdpjydnrhofx Afhswb 2x different screw set including as pictures. The machine line has previously been used for bakery dough.

Condition: good (used), Pneumatic press, pneumatic punch press, multi-function punch press, punch press, universal punch press, punching machine, hydraulic press, basic press, punching press Nwjdpfsx Tdmnex Afhjb -Manufacturer: Schüco, base press with base -Item No.: 280 226 with base 299 504 -Stroke: 20 mm -Pressing force: 32 kN -Operating pressure: 7 bar -Operation: via foot switch -Receiver: Groove 16/28 mm, see photo technical drawing -Dimensions: 400/400/H930 mm -Weight: 91 kg

Condition: ready for operation (used), throat depth: 260 mm, operating speed: 7 mm/s, reverse speed: 73 mm/s, total length: 4,270 mm, total width: 1,750 mm, total height: 2,850 mm, travel distance Z-axis: 190 mm, empty load weight: 12,000 kg, passage width: 2,550 mm, Durma HAP 200 ton x 3100 mm Capacity: 200 ton x 3100 mm Backgauge: elec Njdsx R E Hwspfx Afhowb Locking speed: 100 mm/sec

Condition: good (used), Year of construction: 1978, Make: HAULICK ROOS Type: RVD 40 Year: 1978 Levelling straightner RASTER 12 180/19.150-1 Nsdpfox S H Ilox Afhswb New 1986 incl. Decoiler  incl. Feeder  Capacity Kg: 40000 Table Length:590mm Table Width: 500mm Hole in table:100mm Ram size: 590 x 380mm Stroke: 8 - 50mm Strokes: 30 - 300Min.

Condition: used, functionality: fully functional, Year of construction: 1974, control type: manual, actuation type: hydraulic, bending force (max.): 300 t, working width: 6,000 mm, distance between stands: 5,050 mm, installation height: 3,650 mm, table height: 890 mm, overall weight: 30,000 kg, total length: 6,000 mm, total width: 1,800 mm, power: 1.47 kW (2.00 HP), We are offering this used LVD PPNMZ300/60 press brake, year of manufacture 1974. Manufacturer: LVD Model: PPNMZ300/60 Year of manufacture: 1974 Nodpeyamw Iefx Afhewb Condition: used Category ID: 1946 Type ID: 1717 Machine type: press brake If you have any questions or require further information, please feel free to send us a message or call us.

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced Njdpfex A U Ncox Afhewb • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: used, Fensterpresse Orma Max. 4000x2700mm 380V, 2,2kW - Documentation available: No - CE certificate present: No Nwedpfsx Svw Nex Afheb - Max. workpiece width [mm]: 4000 - Max. workpiece height [mm]: 2700 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Workshop-refurbished Single-Column Eccentric Press WEINGARTEN Type AV 40 Machine No. 121826 D, Year of manufacture 1976 – Completely overhauled in 2003 Pressing force: 40 tons Throat depth: 225 mm Table opening: Ø 200 mm with support rim Ø 225 mm Table dimensions: 560 x 470 mm Ram area: 260 x 200 mm Adjustable ram stroke: 8–88 mm Ram adjustment: 63 mm Max. install height: 500 mm Clamping shank bore: Ø 40 mm Strokes per minute: 40–120 Motor power: 4 kW Power supply: 400 Volt, 50 Hz Table height above floor: 700–950 mm - Table height adjustment with 2 support spindles - Drop-through hole in table as round table opening with reduction ring from Ø 225 to Ø 100 mm - Clutch-brake combination via WEINGARTEN friction-threaded clutch with TDC run-through protection - Stroke release via electric footswitch or two-hand control console - Front crankshaft support bearing - Overload protection via shear plate - Manual central lubrication - Electrical cabinet with dual-circuit contactor control from 2003, permanently mounted on the machine - Safety standard (UVV) for manual loading/unloading The machine is equipped with the following operating modes: - Setup - Single stroke (two-hand) - Single stroke (foot) - Continuous run (foot) - Automatic continuous run - External engagement Required space (L x W x H): 1900 x 950 x 2600 mm Weight: 3.1 tons Very good condition Njdpfoxlkq Isx Afhswb

Condition: reconditioned (used), Year of construction: 2014, operating hours: 5,612 h, functionality: fully functional, pressing force: 48 t, filling opening width: 1,020 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 550 kg, total height: 2,800 mm, overall weight: 12,000 kg, transport height: 2,800 mm, oil tank capacity: 300 l, power: 30 kW (40.79 HP), volume flow: 332 m³/h, Technical information baler: Manufacturer HSM GmbH + Co. KG Typ VK 4812 Year of construction 2014 Hours of operation 5,612 hours, stand August 2025 Press power main press 48 tons Specific press capacity 58,2 N/cm² Feed channel 1,250 x 1,020 mm Theoretic cycle time 11.2 sec. Theoretic throughput rate 332 m³/hour Bale size 1,100 x 750 x 600 up to 1,200 mm Driving motor 30 kW Connected load 32 kW Rated current 59 A Tying system 4-fold horizontal, fully automatic Throughput rate at a bulk weight of 20 kg/cbm up to 6 tons/hour bulk weight of 50 kg/cbm up to 13 tons/hour Bale weight up to 550 kg, depends on material SPS controller Siemens SIMATIC S7-200 Nwjdpfx Ajvtpq Hjfhjb Operating panel Siemens HMI Touch Panel Filling quantity hydraulic oil tank 300 L Oil type HVI 46 Machine installation dimensions with bale chute 10,046 x 4,387 x 2,705 mm (l x w x h) Transport dimensions baler 8,500 x 2,500 x 2,750 mm (l x w x h) Machine weight press approx. 12 t Scope of delivery: Baler HSM VK 4812, without hydraulic oil, without conveyor system. Two wire reel boxes for 8 pieces 40 kg wire reels, without wire Bale chute Machine documentation in German Comments: The press is equipped with an oil cooler and potential-free contacts for external control. The control cabinet is operated from the left in the direction of pressing, the needle unit is located on the right-hand side and can be folded back for transport. The press was partially overhauled and tested in our workshop, see photos and our function video. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is available in German. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: good (used), Year of construction: 1995, functionality: fully functional, pressing force: 70 t, filling opening width: 1,060 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 500 kg, input voltage: 400 V, overall weight: 23,000 kg, noise level: 85 dB, power: 37 kW (50.31 HP), Used BOA 2060 for sale. The machine is currently stored in Belgium. It has been operational up until now and is currently disconnected. The machine is sold as-is, but a possible overhaul can be offered upon request. Technical data: Drive: 37 kW Pressing force: 70 tons Bale dimensions: 1100 x 720 mm Nwodpfx Afoya Uwpehjb Number of wires: 4 vertical, 2 horizontal Filling hopper dimensions: 1500 x 1060 mm Bale weight: approximately 500 kg (depending on material) Capacity: up to 14 tons per hour (depending on material) Press weight: 23,000 kg

Condition: excellent (used), Year of construction: 1995, Decoiler Max. width 350 mm Clamping area coil internal 470 - 530 mm Coil diameter 1500 mm Work load 2000 Kg Straigtner Width 350 mm Roll diameter 30 mm Number off rolls 9 units In feed rolls 2 units In feed roll diameter 90 mm Working speed 40 M/Min Max. thickness 6 mm at 240 N/mm2 Max. Thickness 5 mm at 400 N/mm2 Length:3200mm Width:1500mm Height:2200mm Nedpfx Aox Sx Spofhjwb Weight:3700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2024, condition: excellent (used), Segment radius top tooling for 1000 and 2000 Ton machine Full sets segmented on 835 mm and 10 sections to make 8000 mm Njdpfxsx Sxuko Afhowb Radius 30 / Radius 31 / Radius 32 / Radius 33 / Radius 35 Radius 36 / Radius 39 / Radius 40 / Radius 41 / Radius 42 Radius 43 / Radius 45 / Radius 47 / Radius 48 / Radius 50 Radius 51 /  Radius 53 / Radius 55 / Radius 57 / Radius 58 Radius 60 / Radius 62 /  Radius 70 / Radius 71 / Radius 73 / Radius 75 / Radius 80 Length:12000mm Width:2000mm Height:1000mm Weight:15000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2024, Minimum width 65 mm Maximium width 185 mm Load is 200 Metric Ton / Meter Operation angle from 60 - 180 Gr Die length 1000 mm and 500 mm sections Minimale Breite: 65 mm Nwsdpfx Afox Sw Sueheb Maximale Breite: 185 mm Belastung: 200 metrische Tonnen / Meter Arbeitswinkel: 60°–180° Matrizenlänge: 1000 mm und 500 mm Segmente Länge: 1200 mm Breite: 1200 mm Höhe: 800 mm Gewicht: 1500 kg Length:1200mm Width:1200mm Height:800mm Weight:1500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Hydraulic press TCS - 150T MACH-ID 8821 Manufacturer: TCS Type: 150T Control system: Siemens SIMATIC OP7 Year of manufacture: 1999 Table load sliding table 20000 Kg Table load upper table 9000 kg Table out feed stroke 2100 mm Column diamater 180 mm Closing force 1500 Kn Opening force 700 Kn Laser safe CE Safety Power 15 kW Specifications Metric US Standard Distance between uprights 2000 mm Installation height 2000 mm Table length 1500 x 2000 mm ram stroke 1800 mm Starting speed 50 mm/min. Working speed 8 mm/min. Return speed 50 mm/min. Table rotation 0 - 270 rpm Table rotation 0 - 180 ° Dimensions (estimation) length 4800 mm Nwodsulwzmepfx Afhjb width 5600 mm height 5200 mm Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: used, Year of construction: 2003, pressure . t throat . mm Nwodpfxew Syfco Afheb stroke . mm total power requirement . kW weight of the machine ca. 4 t

Condition: used, Year of construction: 1960, pressure 1000 t Nodpfx Afjw Syd Eohowb stroke 600 mm weight of the machine ca. 4 t

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 12638, electrically heated, with step plate, gold anodised plates, dimensions 2950 x 1600 x 2250 mm, new heating plates in 2023, 21.1 kW, operating pressure 355 bar, 4 x 90 mm cylinders, pressing pressure 2.7 kg/m², pressing force 900 kN, press chamber height 400 mm, pressing area 2550 x 1350 mm, 3.44 m², weight approx. 5 t very good condition Price ex location Transport can be arranged at extra cost! Nwedpfx Afeybbm Teheb

Condition: new, The AHK M 1230 NC is a highly efficient press brake from KNUTH, designed specifically for sheet metal processing within the press brakes category. This machine offers a modern, cost-effective NC alternative to traditional CNC press brakes, making it ideal for operators accustomed to manual programming. Featuring a high-precision, stress-relieved steel frame and hydraulic cylinders, the AHK M 1230 NC excels in handling complex bending sequences effortlessly. Enhanced safety features, including light curtains and a CE-compliant design, ensure operator protection while maintaining productivity. The NC control system, complete with a user-friendly touchscreen, allows for easy input of bending sequences, accommodating up to 500 programmable data sets. You can confidently handle a variety of materials and shapes thanks to Promecam tool mounts and an adjustable back gauge with motorized X and R axes. With features designed for ease of use and reliability, now is the perfect time to request a quote for the AHK M 1230 NC press brake, ensuring your workshop benefits from superior capabilities in sheet metal processing. Nwedpfxeqc S Nae Afhsb

Condition: excellent (used), Year of construction: 2017, operating hours: 13,284 h, functionality: fully functional, pressing force: 140 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,500 kg, oil tank capacity: 2,600 l, Technical data baler: Manufacturer Bollegraaf Type HBC 140 Year of construction 2017 Working hours 13,284, as of October 2025 Press power main press 140 tons (max. 153,5 tons) Nwedpfx Afoxpxhvehsb Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm (l x w) Capacity per cycle time 4,34 cbm Theoretic cycle time 16 sec. Bale size 1,100 x 1,100 mm (w x h), length adjustable Driving motor 2 x 75 kW Connected load 209 kW Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 30 tons/h bulk weight of 50 kg/cbm approx. 46 tons/h bulk weight of 100 kg/cbm approx. 82 tons/h Bale weight 850 up to 1.500 kg Hydraulicoil 2.600 l Univis N46 Baler dimensions with conveyor built up with hopper approx.13,200 x 24,200 x 7,333 mm (l x w x h) Transport dimensions only baler approx.13,200 x 2,884 x 3,539 mm (l x w x h) Machine weight baler approx. 51,810 tons Technical data feeding and elevating conveyor with gooseneck: Manufacturer Bollegraaf Typ HBT 1216/1800 * 23,300 30°/15° Year of construction 2017 Driving motor 7,5 kW Length feeding conveyor 6,750 mm Length elevating conveyor 14,400 mm Length goose neck 2,150 mm Grade 30° Effecting width 1,754 mm Height of side wall feeding conv. 500 mm Height of side wall elevating conv. 800 mm Transport dimensions feeding conveyor with one segment elevating part 9,816 x 2,500 x 2,242 mm (l x w x h) Transport dimensions elevating conveyor with goose neck 13,472 x 2,800 (without motor) x 2,729 mm (l x w x h) Pit dimensions 10,000 x 3,200 x 1,200 mm (l x w x d) Condition: The press is in very good condition and ready for immediate operation, see the function video for more information. The conveyor belt chain needs replacing. The system will be in operation until December 2025. Scope of delivery: baler with conveyor belt, maintenance platform, access ladder, two wire feed stations for 5 wire reels each (without wire), and bale slider. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, Year of construction: 2026, Availability upon request Very robust machine with high pressing force - also suitable for producing briquettes of saleable quality *depending on the material. The large pressing cylinder and the 70 mm briquette make this possible. Nsdpfx Asd Nm Siofhswb Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to errors + 25 years of experience, further development, and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Supplement for demonstration cooling unit + €4,980 net, (can also be retrofitted later) * Cools the pressing tongs (important for use after 4 hours) and the hydraulic oil * Cooling unit recommended for regular use of more than 4 hours at a time. Tariff number: 84793010, Briquette diameter: 70 mm, Front bushing: 125 mm, Max. briquette stroke: 100 mm, Optional briquette stroke: 80 mm, Capacity (depending on material): up to 150 kg/h* *depending on bulk density, *based on a bulk density of 200 kg per cubic meter. . Motor power: 9.2 kW, 400 volts / 50 Hz / 3-phase, Length: 2095 mm, Width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Oil capacity: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 cubic meter Pump: 75 liters Hydraulic pre-compressor Cooling option for pressing tongs: yes, with optional coolable pressing tongs Cooling option for hydraulic oil: yes Cooling of the pressing tongs and hydraulic oil with a cooling unit (optional accessory) Level monitoring option: yes Extruded briquette option; Yes (depending on material) Optional enlarged feed slide: Yes, with special accessory enlarged feed slide CE compliant Raw material requirements: - The moisture content (dry) must be between a minimum of 6% and a maximum of 18% - Maximum chip length: 20 mm - Installation temperature: Temperature-controlled room at a minimum of +5°C - The feed must be free of metals and mineral contaminants such as sand, stones, etc. This may result in damage to the press tools and/or increased wear.

Condition: new, Year of construction: 2026, operating hours: 8 h, Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Njdpfx Afjxfwdshewb Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear