Used Wagner Hc 970 for sale (94)

Year of construction: 1989, condition: used, Axis 3 serial number 84095 tool taper BT40 toll turrets 12 table surface area 1300 x 400 mm no. of flutes 3 T-Nuten T-slot - width 18 mm Nodowhqz Uspfx Ah Ejdc control FANUC dimensions ca. 3000 x 2500 x 2500 mm

Condition: new, Year of construction: 2025, Pneumatic double diaphragm pump Cobra 40 -10 Its unique design allows low pulsation operation Uniform ink flow for perfect spray and highest surface quality Ideal for processing shear and moisture sensitive materials Minimal shear forces - ideal for processing e.g. UV varnishes Ideal for processing small quantities of material and for frequent colour changes Scope of delivery: Basic unit on stand, HD double hose 7,5m, upper container 5l Ex, AirCoat gun AC 4600 Professional including red air cap and holder, Air Coat nozzle ACF 3000 11/40 Technical data: Conversion ratio: 40:1 Volume flow per double stroke: 10 cm3 Flow rate at 200 double strokes: 2 l/min max. Operating pressure: 250 bar Weight: 23 kg Location: 54634 Bitburg At a special price - immediately available Ndodpfx Ahjbuqn Hs Esc

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: MB 116434, travel distance X-axis: 1,100 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 24 m/min, controller model: Siemens Sinumerik 828D, workpiece length (max.): 1,300 mm, workpiece width (max.): 650 mm, workpiece height (max.): 600 mm, Wagner WMC 1100 Year of manufacture: 2011 The machine is in good, fully functional condition. Control: SIEMENS Sinumerik 828D IKZ (Internal coolant supply) Spindle speed range: 8000 rpm Tool holder: SK 40 X-axis travel: 1100 mm X-axis feed force: 20,000 mm/min X-axis rapid traverse: 20 m/min Y-axis travel: 650 mm Y-axis feed force: 20,000 mm/min Y-axis rapid traverse: 20 m/min Z-axis travel: 600 mm Z-axis feed force: 15,000 mm/min Z-axis rapid traverse: 24 m/min Turret Number of tool positions: 24 The machine can be inspected under power. The machine is sold without warranty. Nsdpfxexqzb Ie Ah Eedc The machine was operated in single-shift mode.

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: LWAC450-STES-35025, For sale are two refrigeration dryers from L&WGmbH. Both are in good used condition. Both have been used very little. Both are fully functional. PRICE: 250 euros per unit! Ndsdpfxjxq A Rdo Ah Eoc

Condition: used, length 1200 mm width 500 mm floor-plate height 105 mm weight of the machine ca. 400 kg Electric magnetic plate from WAGNER, a transformer is required for operation / Ndsdpotq I Rqofx Ah Eoc Rectifier required. 110 volts, 2.86 amps. Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 2014, x-travel 1300 mm y-travel 500 mm z-travel 570 mm spindle taper SK40 spindle turning speed - stepless 60 - 6000 U/min rapid traverse x/y/z 7,5 m/min Number of tools 16 St. table surface area 1500 x 400 mm workpiece weight 700 kg total power requirement 12 kW weight of the machine ca. 4100 kg Ndjdpstt Tdmofx Ah Ejc dimensions of the machine ca. 3800 x 3800 x 2800 mm - SIEMENS control SINUMERIK 828D - automatic tool clamping - Cooling device - automatic central lubrication - Chip tray - Full enclosure - Operation manual

Condition: used, Year of construction: 1999, band width 221 mm length in total 1.000 mm weight of the machine ca. 300 kg +++++ Ndodpfxowf Et Hj Ah Eoc Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), Year of construction: 2020, Pneumatic Double Diaphragm Pump Cobra 40-10 Top condition – Year of manufacture: 2020 Its unique design enables low-pulsation operation. Consistent paint flow for a perfect spray pattern and highest surface quality. Ideally suited for processing shear-sensitive and moisture-sensitive materials. Minimal shear forces – ideal for processing, e.g., UV coatings. Ideal for handling small material volumes and frequent color changes. Scope of delivery: Basic unit on frame, HD double hose 7.5 m, upper container 5 l Ex, AirCoat spray gun AC 4600 Professional including red air cap and holder, AirCoat nozzle ACF 3000 11/40. Technical Data: Ratio: 40:1 Displacement per double stroke: 10 cm³ Nsdoxdtkujpfx Ah Eedc Flow rate at 200 double strokes: 2 l/min Max. operating pressure: 250 bar Weight: 23 kg Location: 54634 Bitburg Extremely low hours of use –

Condition: used, Year of construction: 2003, cutting diameter Ø 520/ 520 x 520 mm saw band length 7250 x 50 mm cutting width 1,6 mm cutting speed 16- 90 m/min Ndedpjuxz Thofx Ah Eoc power requirement 11 kW dimensions m feed in one step 520 mm multiple feeding length 2080 mm feed speeds infinitely variable 0- 400 mm/min dimensions 4,0 x 2,8 x 2,6 m weight of the machine ca. 3,5 t Double column band saw, full automatic - Sutron BT 15 user terminal - some blades - rest pice appr. 70 mm

Condition: used, Wagner Cavity Enameling Line Gema with Opti Center Ndsdpfsw U Ra Nex Ah Esc

Condition: ready for operation (used), functionality: fully functional, Universal milling machine WAGNER FCU-1100 is a milling machine, characterized by its robust construction and its worn green color. It is equipped with a modern digital control panel, a metallic working table with T-slots for fixing the parts and other visible mechanical components. Table dimensions: 460x1440mm Spindle nose: ISA40 RPM: 8-1200 Machine equipped with: Ndodpfsridyrsx Ah Esc HURON type head lighting lubrication pump feeds on 3 axes visualization on 3-axes vise anti-vibrations

Year of construction: 2021, condition: ready for operation (used), General Data Measurements width 1600 mm Measurements depth 3400 mm Measurements height 2100 mm Machine weight 5000 kg Control Unit Brand SIEMENS Model SINUMERIK 8287D Main Drive Ndsdpexqtgcsfx Ah Esc Spindle speed range 20 – 2200 Spindle motor power 15 kW Spindle bore 81 mm Number of axis 2 Movement X-Axis Movement 280 mm Z-Axis Movement 1435 mm Workpiece Workpiece drm over bed 500 mm Workpiece drm over support 260 mm Tail Stock Pinol diameter 75 mm Pinol tool taper MK 5 This Wagner WDE 500 PLUS was manufactured in 2021. It features a max turning diameter over bed of 500 mm and a spindle speed range up to 2200 rpm. Equipped with Siemens 828 B-T control for enhanced precision and a spindle motor power of 15 kW. Ideal for robust turning operations. Machine dimensions are 3400 × 1600 × 2100 mm, weighing approximately 5000 kg. For more information about this machine, please reach out to us. Application Types Turning

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 9101291, travel distance X-axis: 2,500 mm, travel distance Y-axis: 940 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 2,100 rpm, table length: 2,600 mm, TECHNICAL DETAILS Travel distances X-axis: 2,500 mm Y-axis: 940 mm Z-axis: 1,000 mm Spindle speed: 2,100 rpm Table length: 2,600 mm MACHINE DETAILS Control: Heidenhain 355 Ndjdoxdaiqspfx Ah Esc Weight: 10,000 kg EQUIPMENT SK50 milling head

Condition: ready for operation (used), Various machines from a production line are available. 1) Band saw Wagner WPB 420. 2) Conventional soldering machine Dalex Technoplex. 3) Broaching press. 4) Guillotine shear Omag. 5) Jaw grinding machine Wagner. 6) Two electric induction heaters. 7) Two thread cutting machines. 8) Two crimping machines. An on-site inspection is possible. A package sale is preferred. Nedpfx Ahexnbr Us Esdc

Condition: good (used), functionality: fully functional, 2x Powder supply units (Manufacturer: Wagner) 2x Powder control units & spray guns (Manufacturer: Wagner) 1x Curing oven 1x Complete overhead rail system General information about the powder coating plant: 2x Powder supply units (Manufacturer: Wagner): without powder recovery, resulting in short changeover times Njdpsxhcx Aofx Ah Eedc Curing oven: Oven dimensions (internal): Length: 6500 mm Width: 2400 mm Height: 1400 mm Maximum component weight: 750 kg Retrofitted to forced-air gas burner (approx. 85kW/h) Rail system: The system was completely renewed in 2013 Load per suspension point: 200 kg Load per suspension traverse: 400 kg Corresponding technical drawing available

Condition: used, Year of construction: 1986, total height: 1,900 mm, total length: 2,300 mm, total width: 2,200 mm, Empty weight: 2.000 kg - Year: 1986 - Documentation available: No - Serial number: 86721 - Control: Conventional - Motor power: 1.5kW - Travel Z: 400mm - Model: kslijper - Travel X: 700mm - Grinding diameter: 250mm - Travel Y: 400mm - Table length: 900mm Njdpfxsw E If Eo Ah Ejdc - Magnet size: 350mm - Table width: 350mm - Transport dimensions: 2300mm x 2200mm x 1900mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2014, Tailstock travel max. 130 mm Ndjdpfsqzxvmox Ah Ejc Technical data: Max. turning diameter: 360 mm Turning diameter over cross slide: 180 mm X-axis travel: 230 mm Z-axis travel: 620 mm Control: SINUMERIK 828 D Spindle bore: 40 mm Weight approx. 1600 kg Dimensions (LxWxH) approx. 2510x1670x2050 mm Year of manufacture: 2014 The machine is in very good condition. Sold without guarantee/warranty.

Condition: ready for operation (used), Year of construction: 2021, General Data Measurements width 1700 mm Measurements height 2240 mm Ndodpfx Ahexqtgve Ejc Machine weight 3500 kg Measurements depth 2100 mm Control Unit Brand SIEMENS Model SINUMERIK 828D Main Drive Spindle speed range 80 – 10000 rpm Tool taper SK 40 Movement X-Axis Movement 600 mm X-Axis Feed Force 10000 mm/min X-Axis Rapid Traverse 24000 mm/min Y-Axis Movement 400 mm Y-Axis Feed Force 10000 mm/min Y-Axis Rapid Traverse 24000 mm/min Z-Axis Movement 450 mm Z-Axis Feed Force 10000 mm/min Z-Axis Rapid Traverse 20000 mm/min Additional Equipment Rigid cast-iron frame construction Linear guides on all three axes Automatic double-arm tool changer (16 stations) Complete coolant system Central automatic lubrication Air blast system for spindle cleaning Machine enclosure with doors Machine and signal lights Documentation in English CE-certified This 3-axis WAGNER WMC 600 L was manufactured in 2021, featuring a robust cast-iron frame and linear guides on all axes. It includes a Siemens 828 Basic ShopMill, an automatic double-arm tool changer with 16 stations, and a complete coolant system. The spindle supports speeds up to 10,000 rpm with a power of 11 kW. If you are looking to get high-quality milling capabilities consider the WAGNER WMC 600 L machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Used lathe by Wagner Wagner WDE 500 cycle-controlled lathe Only approx. 1,700 operating hours Turning diameter: 500 mm Turning length: 1,500 mm Control: Siemens 802 C Swing over carriage: 280 mm Nodpfxexnqcvj Ah Ejdc Spindle bore diameter: 82 mm Number of controlled axes: 2 Speed range: 20-3,000 rpm Rapid traverse speed: 5 m/min Number of turret positions: 1 Multifix "C" Tailstock: Yes, MK 5 Drive power: 7.5 kW Machine weight: approx. 3.0 t Dimensions (L x W x H): 3.3 x 1.7 x 1.7 m Cycle-controlled CNC lathe in good condition. Accessories: - Coolant system - Basic holder - 3-jaw chuck - Various PARAT tool holders

Condition: good (used), Airless sprayer, painting device, spray pack, paint sprayer, paint spray system, paint pump, electrostatic sprayer, airless complete system, pneumatic piston pumps, airless high-pressure pump, air motor, AIR MOTOR -Manufacturer: Wagner, Airless sprayer type: 33-70 with transport trolley and spray gun Ndedsw U T Atopfx Ah Eoc -Material flow: max. 12.6 l/min -Air inlet pressure: max. 8 bar, operating pressure max. 264 bar -Individual components: see photos -Dimensions: 830/680/H1140 mm -Weight: 50 kg

Condition: good (used), functionality: fully functional, High-pressure piston-diaphragm pump. Universally suitable for aggressive, abrasive, or shear-sensitive products. Very low rinsing agent consumption. For all applications up to 250 bar and 5 l/min. Supplies up to 8 AirCoat spray guns. Ndjdpfx Ahsxmf Svj Ejc + 3 automatic AirCoat spray guns with internal control for installation in automated painting systems. +FITTINGS+AIR/PRODUCT HOSE

Condition: excellent (used), functionality: fully functional, Complete equipment for an industrial paint shop: - Dry wall with extraction system and filters Nedoxmr Tyepfx Ah Ejdc - Mechanical conveyor for painted parts with hooks (modular construction, adjustable to the room) - WAGNER painting unit The paint shop was used for painting window frames.

Condition: used, Year of construction: 2010, Powder coating line from 2010, in excellent condition. Currently in use, available for inspection and testing. Maximum part size: L x W x H = 2600 x 400 x 1850 mm Equipment Technological conveyor Automatic speed V = 1.2 m/min Speed regulation from 0.5 to 2.5 m/min Preparation station MNA-3-LPG, total length 16.7 m Entry area: L = 2.5 m a. Washing, degreasing and phosphating: L = 3.6 m Number of spray frames – 10 Number of nozzles in the frame – 18 Total number of nozzles – 180 Pump capacity – 162 m³/h Pump power – 15 kW 4 m³ capacity for active liquid Internal heat exchanger with LPG burner – 160 kW Temperature – 50°C Mechanical oil separator Filtration system Dosing system with diaphragm pump and regulator Washing time – 3 min b. Drip zone L = 3.1 m Drip time – 2 min 30 sec c. First rinse L = 1.2 m Number of spray frames – 4 Number of nozzles in the frame – 18 Total number of nozzles – 64 Pump capacity – 38 m³/h Pump power – 3 kW 1.5 m³ water capacity Rinse time – 1 min d. Drip zone L = 3.1 m Ndjdpjv Ed Ukjfx Ah Eec Drip time – 2 min 30 sec e. Fine rinse L = 1.28 m Number of spray frames – 3 Number of nozzles in the frame – 18 Total number of nozzles – 54 Pump capacity – 33 m³/h 1.5 m³ water capacity Pump power – 3 kW Additional spray frame Rinse time – 1 min f. Drip zone L = 2 m Drip duration – 1 min 40 sec Three connections for the extraction system with three fans Working zone made of stainless steel Pipes made of PVC or stainless steel 1 pc. Automatic dryer after washing AST-1-KLPG: Dimensions of the working zone L x W x H = 7000 x 3000 x 2800 mm Air curtains on each side to reduce heat loss Indirect heat exchanger, heated by LPG, 200 kW Three fans, air supply 6000 m³/h Two connections for the extraction system Temperature sensor and regulator Overheating sensor Circulation sensor Working zone made of galvanized steel Thermal insulation 200 mm thick Drying time – 10 min 1 pc. Automatic polymerization oven APT-2-KLPG Working area dimensions L x W x H = 10200 x 3600 x 2800 mm Air curtains on one side to reduce heat loss Two indirect heat exchangers heated by LPG, each 300 kW Eight circulation fans, each with a capacity of 6000 m³/h Two connections for the exhaust system Temperature sensor and regulator Overheating sensor Circulation sensor Working area made of galvanized steel Thermal insulation 200 mm thick Polymerization time – 25 min 1 pc. Overhead rail transportation system for ATR paint shop: Straight rail with hangers L = 400 mm – 146 m Drive station – 2 pcs. Tension station – 1 pc. Chain lubrication station – 1 pc. Rail support structure drawings – 1 set.

Year of construction: 2012, condition: ready for operation (used), Control Unit Brand SIEMENS Model 802-C Main Drive Number of axis 2 Additional Equipment Complete electrical equipment 400 V / 50 Hz RS 232 interface Electronic handwheels with increment preselection Mechanical spindle engagement lever Right and left rotation Pilot lever for feed with detent function Rapid traverse override as a push button Ndodpexfwztefx Ah Eoc Movable control panel Constant cutting speed Bed guideways induction-hardened, ground, and Turcite-coated This WAGNER WDE 500 was manufactured in 2012. A robust horizontal turning machine featuring a Siemens 802-C control interface, it includes a three-jaw lathe chuck, quick-change tool post, and manual tailstock. The machine is equipped with a complete coolant system and an enclosure with safety features. If you are looking to get high-quality turning capabilities consider the WAGNER WDE 500 machine we have for sale. Contact us for more information. Application Types Turning

Condition: good (used), Year of construction: 1990, machine/vehicle number: 90650664, Offer 24402 Technical data: Nedeuzvzxjpfx Ah Esdc - Drilling capacity in steel 50 mm - Drill spindle holder MK 5 - Drill spindle stroke 315 mm - Projection min / max 350 / 1600 mm - Column diameter 350 mm - max. / min. distance - Spindle - base plate 350 - 1250 mm - Vertical stroke of the arm 580 mm - 16 spindle speeds 25 - 2000 rpm - Feed rates 0.04 - 3.2 m/rev - Drill spindle drive 400 V / 4 kW - Lift drive 1.5 kW - Column clamping 0.75 kW - Cube table - Coolant device - Space requirement approx. W 2490 x H 2645 x D 1060 mm - Weight approx. 3500 kg