Used Wagner Egv 1600 for sale (86)

Condition: refurbished (used), functionality: fully functional, total width: 2,500 mm, total length: 7,000 mm, total height: 2,600 mm, The following applies to used equipment that undergoes a general overhaul: - New polyamide guide sleeves and sliders - Electrical systems and control elements are completely renewed and brought up to the 2026 technical standard - Complete replacement of hydraulic hose lines in the press and aggregate - Cylinders are reconditioned with new seal kits - Valid UVV/E-Check for 1 year - Steel structure is renewed if necessary Any special equipment is available upon request. The images shown are sample images of machines that have already been sold. Bodpozazirofx Aiwoww Every inquiry or offer is tailored to the customer and their requirements.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, We are selling a used 3-axis machining center, WAGNER WMC 1100, in very good condition. The machine was manufactured in Taiwan. It was only used for the production of individual parts and therefore has very few operating and power-on hours. Technical data: Table: 1300 x 600 mm Table load: 500 kg X-axis: 1100 mm Y-axis: 650 mm Z-axis: 600 mm Control: Siemens 828D Tool positions: 24 Spindle head: BT-40 Spindle speed: 8000 rpm Accessories: 1 x Chip conveyor 1 x Band filter 1 x Measuring probe 1 x Broken tool detection 1 x Coolant system Bwodpo Agwvusfx Aiwsw 1 x Handwheel

Condition: ready for operation (used), Year of construction: 2021, spindle speed (max.): 2,200 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 1,435 mm, spindle motor power: 15,000 W, total height: 2,100 mm, overall weight: 5,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 8287D, number of axes: 2, This Wagner WDE 500 PLUS was manufactured in 2021. It features a max turning diameter over bed of 500 mm and a spindle speed range up to 2200 rpm. Equipped with Siemens 828 B-T control for enhanced precision and a spindle motor power of 15 kW. Ideal for robust turning operations. Machine dimensions are 3400 × 1600 × 2100 mm, weighing approximately 5000 kg. For more information about this machine, please reach out to us. Machine Benefits Qualitative Machine Benefits • Machine in very good condition, with very low working hours Technical Machine Benefits • Right and left spindle rotation • Rapid feed (z, x axes): 15000 mm/min • Repeatability accuracy: ±0. 005 mm • Positioning accuracy: ±0. 01 mm • Max. Distance between centers: 1500 mm • Bed width: 500 mm • Spindle nose camlock: din 55029 kk8 • Linear guides on x and z axes • Precision ball screws, hardened and ground • Telescopic cover on z-axis Extra Information Tail Stock Tailstock adjustment: manual Tailstock quill travel: 100 mm Mount Position (Assembly) Electronic handwheels with incremental preselection Feed lever with latch function Rapid feed override with selector switch Movable operator panel Constant cutting speed Media Automatic central lubrication Work lamp Complete coolant system Enclosure with 2 sliding doors and safety glass windows 1 set of foundation bolts CE compliance Control Unit Siemens 828 B-T control ShopTurn operation with Manual Machine mode Bwjdozbcmnjpfx Aiwjw Dimensions Machine Depth 3400 mm

Condition: ready for operation (used), Year of construction: 2010, Immediately available ex location: CNC bed milling machine Wagner Type WBE 1300 R Year of manufacture: 2010 Siemens Sinumerik 810 D Table 1500 x 400 mm Travel X/Y/Z: 1300/500/570 mm SK 40 Automatic tool clamping Drive power 12/9 kW Bwodpfe Aa Imyjx Aiwew Spindle speeds 60 – 8,000 rpm Electronic handwheel Ball screw Vice Various tool holders Weight 4 t Price: EUR 5,500 plus VAT ex location

Condition: ready for operation (used), * Brand: Wagner * Length frame: A-A = 2600 mm * Beltwidth: 1200 mm Bwodpsywm T Ssfx Aiwow * Driving: 3 kW gearbox * Dim. Block: 1600 x 1100 x 600mm * Incl.: rectifier.

Condition: used, Year of construction: 2012, functionality: fully functional, overall weight: 2,600 kg, type of input current: AC, input voltage: 400 V, 4 x Wagner Permanent Magnet Separators – various models A total of 4 used permanent magnet separators from the manufacturer Wagner Magnete are for sale. The magnetic separators were used in our recycling and processing plant and serve to automatically separate ferromagnetic components from different material flows. Due to the restructuring and upcoming reconstruction of our recycling plant, the four magnetic separators are being offered for sale. Technical data of the 4 magnetic separators: Magnet 1: - Manufacturer: Wagner Magnete - Type: 0452-115/130-250 G2 - Equipment number: 546235 - Weight: approx. 2,600 kg - Motor power: 3 kW Magnet 2: - Manufacturer: Wagner Magnete - Type: 0452-115/170-250 G2 - Equipment number: 546236 - Weight: approx. 3,340 kg - Motor power: 3 kW Magnet 3: - Manufacturer: Wagner Magnete - Type: 0452-95/130-250 G2 - Equipment number: 546237 - Weight: approx. 2,200 kg - Motor power: 2.2 kW Magnet 4: - Manufacturer: Wagner Magnete - Type: 0452-95/130-250 G2 - Equipment number: 546986 - Weight: approx. 2,200 kg - Motor power: 2.2 kW Bodpfjz R Sw Hjx Aiweww Further technical specifications (all 4 magnetic separators): - Belt speed: 1.5 m/s - Motor manufacturer: SEW - Operating voltage: 400 V - Current type: Three-phase (AC) - Frequency: 50 Hz - Protection class: IP55 Condition and sale: All four magnetic separators are in used condition and show corresponding signs of wear and tear due to operation. The magnetic separators can be purchased individually or as a complete package. An on-site inspection is possible after prior appointment. Technical documentation is available. Price upon request. If you are interested or have any further questions, please do not hesitate to contact us.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, Universal milling machine WAGNER FCA 400 & 3-axis digital from a testing workshop - Year of manufacture 2008 Bwjdpfx Asz St Hqoiwsw - CE marking - 3-axis digital display - Travel ranges X/Y/Z 450x400x400mm - Fixed angular table 740x320mm - Automatic feed rates in all three axes - Rapid traverse - Speed range 40 - 2000 rpm - Tool holder ISO 40 - Vertical milling head with drilling quill - Safety handwheels - Coolant system - Horizontal counter bearing - Work light - Machine feet Dimensions: L x W x H 1.4 x 1.2 x 1.9 meters / Weight 1800 kg Errors and omissions excepted.

Condition: reconditioned (used), - Non ferrous eddy current separator type Wagner - with vibration feeder Bwsdpfo Ahg Rgsx Aiwsw - Conveyor width 1200 mm - overhauled condition - ready to work

Condition: like new (used), Year of construction: 2023, functionality: fully functional, CNC Siemens 828 D Year: 2023 • Max. diameter: 400 mm • Max. workpiece length: 550 mm • Axis travel: X-axis: 240 mm Z-axis: 600 mm Bodpfx Aioy Nzc Eewsww Y-axis: +/- 60 mm Sauter 12-position BMT turret counter-spindle bar feeder complete specifications in PDF file

Condition: used, Year of construction: 2012, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, overall weight: 1,610 kg, Wagner Magnets – Non-ferrous metal separator / Eddy current separator – Type 0429/1-37/90/8 For sale is a used non-ferrous metal separator (eddy current separator) from the manufacturer Wagner Magnets. The machine was used in our recycling and processing plant and serves to separate non-ferrous metals, such as aluminum, from various material streams. Due to the restructuring and upcoming renovation of our recycling plant, the machine is being offered for sale. Technical data: Manufacturer: Wagner Magnets Machine designation: Non-ferrous metal separator Type: 0429/1-37/90/8 Equipment number: 542449 Order number: A 354429 Belt speed: adjustable from 0.5 to 2 m/s Weight of base unit: approx. 1,610 kg Discharge hood included Permissible ambient temperature: -20 °C to +45 °C Control: Type: 0428/1-25 FE Equipment number: 542450 Mains connection: 400 V / 50 Hz Recommended fuse rating: 25 A (slow-blow) Protection class: IP54 Weight: approx. 173 kg Drives: Rotor drive: 4 kW Belt drive: 1.5 kW Frequency converter for rotor and belt drive included Magnetic drum: Type: 0421N-30/85-02 A 1AL 15x20 Equipment number: 542449 Motor power: 0.55 kW Discharge hood: Weight: approx. 260 kg Condition and sale: The machine is in used condition and shows corresponding signs of wear and tear due to operation. An on-site inspection is possible after prior appointment. Bjdez R S D Tepfx Aiwsww Technical documentation is available. Price on request. If you are interested or have any further questions, please do not hesitate to contact us.

Condition: like new (used), Year of construction: 2016, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 16P1269203, type of input current: three-phase, operating pressure: 7 bar, pump capacity: 7 l/min, power: 0.06 kW (0.08 HP), Equipment: documentation/manual, MODE OF OPERATION The system is suitable for the proportioning (metering) and mixing of two- or multi-component products. An electronic control system monitors and regulates the specified mixing ratio. The base paint flows continuously, and the control system mixes the necessary amount of hardener (in timed intervals) via a valve. The flow rate of the base paint and hardener is measured with flow meter cells. With plunger pumps, stroke sensors can also be used. The components and cleaning agents are supplied by feed pumps. Color Selection The mixing ratios, pot life, etc., are stored in recipes. The color can be changed by simply switching recipes. Further Features and Applications: For low to medium pressure (32.5 MPa; 325 bar; 4714 psi). 2K COMFORT XL for high pressure (53 MPa; 530 bar; 7687 psi). Modular design – can be configured according to customer requirements. Electronic accuracy in metering ensures consistent quality. Processing of water-based 2K materials is also possible, as all material-contacting parts are suitable for this purpose – for example, made of stainless steel. The fluid component of the Ex version is suitable for use in potentially explosive areas (Zone 1 and 2). Many displays of the functions are language-independent and use simple symbols. Text is displayed in the selected language. Consumption overview for each component and for cleaning agents, VOC documentation. Storage of the last 700 error messages with date and time. Safety through continuous monitoring of system parameters, informing the operator when even the smallest malfunctions occur and, if necessary, automatically interrupting production. Protection of parameters by security code. Settings can be saved on a USB stick. Electronic adjustment of the mixing ratio between 0.1:1 and 50:1. Bwedpfxszb I Spo Aiwjw Up to 100 work recipes. (Also with robot communication or Profibus.) Possibility of two separate fluid circuits: – for simultaneous operation, – for quick color changes, – or to separate two incompatible 2K materials from each other (e.g., PUR and epoxy paints). Programmable cleaning recipes to save up to 60% of cleaning agents compared to conventional systems. Fully automatic control and monitoring for 1–4 guns. Compatibility with solvent-based and water-based products, as well as selective automatic cleaning with water and/or solvents. Use of manual or automatic atomizers. Release of automatic spray booth, automatic gun cleaning device, etc. Possibility of robot communication.

Condition: repair required (used), functionality: limited functionality, Manufacturer: Maschinen Wagner Model: DCE 230 × 1500 Machine type: Lead and feed spindle lathe Machine no.: 2JG0160 Year of manufacture: 1990 Power connection: 380 V / 50 Hz Distance between centers: approx. 1,500 mm Swing over bed: approx. 230 mm* Swing over cross slide: approx. 460 mm* Turning diameter over cross slide: approx. 290 mm* Spindle bore: approx. 60 mm* Max. spindle speed: approx. 1,800 rpm* Main motor: approx. 5.5 kW* Machine weight: approx. 1,800–2,200 kg* Feed: mechanical longitudinal and transverse feed (feed shaft does not rotate, presumably a shear pin has sheared) Thread cutting: functions via lead screw and feed gear Guideways in very good condition. Accessories: Tool holder, tailstock center Bjdpfx Asz Hpahjiwsww The machine can be inspected on site.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 1966, Wagner metal band saw - Control unit with analog counter - Band length 5,000 mm - Front-mounted guide rollers - Semi-automatic tensioning device - Chip conveyor Bsdps Adz E Rsfx Aiwoww

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 828D, total height: 2,240 mm, overall weight: 3,500 kg, spindle speed (max.): 10,000 rpm, This 3-axis WAGNER WMC 600 L was manufactured in 2021, featuring a robust cast-iron frame and linear guides on all axes. It includes a Siemens 828 Basic ShopMill, an automatic double-arm tool changer with 16 stations, and a complete coolant system. The spindle supports speeds up to 10,000 rpm with a power of 11 kW. If you are looking to get high-quality milling capabilities consider the WAGNER WMC 600 L machine we have for sale. Contact us for more information. Additional equipment • Rigid cast-iron frame construction Bedpfx Aijzvu Rmoweww • Linear guides on all three axes • Automatic double-arm tool changer (16 stations) • Complete coolant system • Central automatic lubrication • Air blast system for spindle cleaning • Machine enclosure with doors • Machine and signal lights • Documentation in English • CE-certified Machine Benefits Qualitative Machine Benefits • Machine is in excellent condition. Technical Machine Benefits • Spindle motor power (siemens s6 40%): 11 kw spindle motor power (siemens s1 100%): 5. 5 kw • Tool magazine capacity: 16 tools • Tool holder: din 69871 a sk 40 • Maximum tool diameter: 89 mm • Maximum tool weight: 7 kg • Tool change time: 2 seconds • Chip-to-chip time: 7 seconds • Table clamping surface: 800 x 400 mm • Table load capacity: 300 kg Extra Information Machine still under power Dimensions Machine Depth 2100 mm Technical Specification Taper Size SK 40

Condition: used, machine/vehicle number: 184099601, Turning length: max. approx. 1000 mm, center height: approx. 250 mm, with coolant system, machine light, 4-jaw chuck, diameter: approx. 250 mm, hollow spindle diameter: 60 mm. Bsdpfx Aij Af Nkljwsww

Condition: good (used), Year of construction: 1992, machine/vehicle number: 43817, Offer 26319 Bede Agvk Sspfx Aiwoww Technical data: - Cutting range at 90° (round): 50 to 420 mm - Cutting range (square): 420 x 420 mm - Saw band dimensions (approx.): 6280 x 38 x 1.3 mm - 6 cutting speeds: 16 x 105 m/min - Cutting pressure, continuously adjustable: 0 - 400 mm/min - Hydraulic material clamping - Material feed automation: 8 - 520 mm - Multi-stroke up to: 2080 mm - Minimum remaining piece length: 70 mm - Pre-selection of the saw band stroke height - Chip conveyor - Coolant system - Total drive power: 400 V / 7.5 kW - Space requirement (approx.): W 2900 x H 2700 x D 2400 mm - Weight (approx.): 2900 kg - Motorized feed roller runs: 3 x 2000 mm - Total weight of roller runs (approx.): 1200 kg

Condition: used, machine/vehicle number: 9125044, with clamping cube, size: approx. 650 x 500 x 500 mm, overhang: approx. 1000 mm. Bwjdpfj Af Nkdox Aiwsw

Condition: used, Year of construction: 1980, type of input current: three-phase, pressing force: 500 t, stroke length: 300 mm, table width: 1,800 mm, table length: 1,000 mm, ram plate width: 160 mm, clearance between the columns: 1,850 mm, total length: 2,000 mm, total width: 3,000 mm, total height: 6,000 mm, overall weight: 50,000 kg, year of last overhaul: 2010, distance between side stands: 800 mm, distance between stands: 1,850 mm, stroke rate (max.): 24 1/min, WAGNER PDE 500/1.8 mechanical press, 500 tons, year 1980, overhauled in 2010. Double-column/4-column machine with a slide stroke of 300 mm, table size 1800 x 1000 mm, front opening between columns of 1850 mm, and top dead center clearance of 1100 mm. The press is equipped with a die cushion. External dimensions: approximately 3000 x 2000 x 6000 mm. Coil unwinder included. Bwodpfx Aj Agb Iasiwjw

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 630 mm, total height: 2,420 mm, total width: 1,862 mm, total length: 3,390 mm, overall weight: 2,450 kg, WAGNER MILLING MACHINE MODEL: BUT 1270 2VS 3-AXIS CNC X-AXIS: 1000 mm Y-AXIS: 450 mm Bedpfx Asz Ei S Ijiwoww Z-AXIS: 630 mm DRILLING DIAMETER: 40 USED MACHINE INTERNAL CODE: SVR 442

Condition: excellent (used), For sale: WAGNER FCA 500 universal milling machine in very good technical condition. This machine features robust German construction and is equipped with a 3-axis digital readout (DRO), which significantly facilitates precise machining operations. The mill is ideally suited for tool shops, single-part production, as well as maintenance and service work. Technical specifications: • Manufacturer: WAGNER Maschinen • Model: FCA 500 • Year of manufacture: 2004 • SINO digital readout – 3 axes (X,Y,Z) • Spindle speeds up to 2000 rpm • Power supply: 380 V • Frequency: 50 Hz Bwodpsz Slpxofx Aiwjw • Total power: 6.5 kW Equipment: • Vertical milling head • SINO digital readout • Variable speed control • Large work table with T-slots The machine is complete, in good technical condition, and shows normal signs of use.

Year of construction: 2011, condition: ready for operation (used), Various metalworking machines, including a larger Wagner radial drilling machine, are available. 1) Column radial drilling machine Wagner PRC 50, year of manufacture: 2011, drilling capacity (steel): 50mm, spindle stroke: 315mm, outreach range: 350mm-1600mm, spindle-base plate distance: 370mm-1270mm, speed: 2000rpm, machine dimensions X/Y/Z: approx. 2500mm/1100mm/2900mm, weight: approx. 3500kg. The machine has an unknown defect. 2) Column drilling machine Alzmetall AX3/SV, year of manufacture: 2000, drilling capacity (steel): 32mm, spindle stroke: 120mm, outreach: 293mm, column diameter: 115mm, table dimensions X/Y: 515mm/360mm, speed: 2250rpm, weight: approx. 300kg. 3) 2x metal circular saw Macc NTM 350, year of manufacture: 1998/2010, saw blade diameter: 350mm, cutting capacity: 120mm, weight: approx. 450kg. 4) Belt grinding machine Grit A/S GIS 150, year of manufacture: 2014, belt dimensions X/Y: 150mm/2000mm, motor power: 4kW, weight: approx. 100kg. An on-site inspection is possible. A package sale is preferred. Bodpfoy Eqtiox Aiwoww

Condition: like new (used), Year of construction: 2023, operating hours: 28 h, functionality: fully functional, machine/vehicle number: 2380029, total height: 2,600 mm, total width: 1,500 mm, total length: 3,410 mm, overall weight: 4,200 kg, rotor diameter: 330 mm, type of input current: AC, rotor length: 800 mm, power: 30 kW (40.79 HP), Function: The input material is drawn in by two slowly counter-rotating shafts (resulting in dust- and noise-free operation), onto which cutter discs are mounted. This process is monitored by an intelligent and innovative PLC control system. In the event of overload or the presence of foreign objects in the cutting unit, the control system reverses the direction of rotation. The precise cutting gap between the discs enables energy-efficient shredding of the material. The attached scraper comb prevents material from wrapping around or being pulled up into the cutters. The width of the cutters and the number of cutting edges determine the output particle size. Possible applications: Thanks to its robust construction and design for long service life, this machine can shred, economically, not only special waste, metal chips, electronic scrap, and steel drums, but also all kinds of containers filled with liquids. Bwedpfx Asyw N Acsiwjw All types of industrial waste, metal and plastic containers Production waste, file folders, paper, cardboard Electronic scrap, electric cables, metal shavings Food, kitchen waste, biogenic waste, wood Glass, plastics, various containers filled with liquids, etc.

Condition: used, Storage location: Nattheim Bjdpfxs Adrito Aiwoww

Condition: excellent (used), WSK Intermarking Fritz Wagner Type 1164 – hot stamping / foil gilding machine Bedsz Sm Ucopfx Aiwjww

Condition: used, Year of construction: 2009, CNC Machining Center Wagner-Eumach, Model EBM 3200, year of manufacture 2009 for sale. Condition: Fully operational Travel X-axis: 3,200 mm Travel Y-axis: 1,100 mm Travel Z-axis: 900 mm CNC control manufacturer: Sinumerik CNC control model: Sinumerik 810D Shopmill Total weight: 25,000 kg Overall length: 7,800 mm Overall width: 4,700 mm Maximum workpiece weight: 5,000 kg Feed travel X-axis: 3,200 mm Feed travel Y-axis: 1,100 mm Feed travel Z-axis: 900 mm Spindle motor power: 45,000 W Rated apparent power: 45 kVA Max. spindle speed: 6,000 rpm Min. spindle speed: 6,000 rpm Table length: 3,250 mm Table height: 1,030 mm Table load: 5,000 kg Table width: 1,220 mm Maximum tool diameter: 125 mm Maximum tool length: 300 mm Maximum tool weight: 15,000 g Spindle operating hours: 18,000 h Bwsdpfxow D Slte Aiwow Equipment: Chip conveyor, NC rotary table (table size 800 x 800 mm), tool holder SK 50, through-spindle coolant (IKZ) Inspection possible by appointment.