Press container

Wagner PG2006_Wagner_WPLM_III_20_Nr.100371

Condition: used, Year of construction: 2026, Special price – demonstration machine, Garbsen. Our WL 6 machine concept. The Weima high-performance shredder, with its flexible application options, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into wood chips, achieving a significant volume reduction of the material, especially with bulky materials. Mode of operation: The machine is equipped with a large feed hopper and can be loaded via a conveyor belt or manually. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without requiring manual assistance. The hydraulically controlled slide feeds the wood waste to be shredded to the cutting area of the rotor and is automatically and load-dependent controlled. The internal slide guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are cardanically suspended to avoid transverse forces on the piston seals. The patented and profiled V-rotor, made of solid steel, has a diameter of 252 mm and operates with a rotor speed of 80 - 120 rpm. The concave, aggressive, and four-way rotatable knives/cutting crowns are located in milled knife pockets on special knife carriers. This patented system guarantees, through the resulting reduction in the cutting gap between the counter-knife and the rotor, a high throughput, low energy consumption, and an optimal discharge of the shredded material. The screen located under the rotor determines the chip size (10 - 100 mm). An optionally available, hydraulically opening screen basket is also available. The power transmission from the electric motors is via V-belts to a heavily dimensioned gearbox, which is attached to the rotor shaft on one side. Precise cutting at high throughput with a profiled V-rotor. The V-rotor, developed specifically by WEIMA, is universally applicable and made of solid material. Its aggressive material feed, with up to two knife rows, guarantees a high throughput with low power consumption. It can be equipped with hardened cutting knives made of steel with edge lengths of 30 mm and 40 mm. These can be repeatedly rotated when worn, which drastically reduces maintenance costs. Intuitive operation thanks to a Siemens PLC control with a touch display. To ensure that the electronics are optimally matched to the machine, we design, build, and wire our control cabinets ourselves. In doing so, we use only high-quality components – for example, from Siemens or Rittal. Intuitively operable touch screens guarantee quick adjustments. Functions such as adjusting the slide timing or stop ensure a high throughput. The built-in overload protection also prevents damage to the machine. Technical specifications WL 6: Feed opening 800 x 1,250 mm. Hopper capacity 0.9 m³. Rotor length 800 mm. Rotor diameter 256 mm. Drive power 22 kW. Rotor speed 90 rpm. Max. number of knives 42 pieces. Type and size of knives: concave / 40 x 40 mm, cutting crowns. Screen size 10-60 mm. Paint: WEIMA standard RAL 2022 / 7016. Connection value 400 V +/- 5% / 50 Hz. Weight approx. 1,600 kg. Including: - Control cabinet* (Rittal) incl. electrical control (Moeller / Siemens) and S Tjdpfxoy D E Tdj Al Aoc

Condition: used, Year of construction: 1999, 6 vertical storage tanks with jacket cooling Additional title: vertical, coolable stainless steel tanks Tedpow Tlppofx Al Ajc Content: 2200 l Max. pressure: 0,99 bar Length: 1000 mm Width: 1000 mm Height: 1965 mm Operation / Control: manual Material: stainless steel 1.4301 Position: free-standing Base construction: cylindrical tank with curved bottoms and square tube feet on domes Features: sprayball, bunging apparatus, pressure gauge, 1 shell cooling zone, standhose for content display, manhole, thermometer and sampler in the shell, manual valve for cooling control, central bottom outlet

Condition: not inspected (used), Year of construction: 1985, functionality: fully functional, pressing force: 50 t, bale length: 1,000 mm, bale width: 750 mm, bale height: 750,750,750 mm, bale weight: 500 kg, input voltage: 400 V, overall weight: 7,500 kg, oil tank capacity: 500 l, power: 30 kW (40.79 HP), empty load weight: 7,500 kg, input frequency: 50 Hz, Manufacturer: Paal Typ: Pacomat V Year of construction: 1985 Press power main press: 50 t Specific press capacity: 5 kg/cm² Feed channel: 1.000 x 720mm (l x w) Theoretic throughput rate: 200 cbm/h Bale size: 700 x 1.000 mm (w x h) length adjustable Driving motor: 30 kW Tsdpsic Rl Dofx Al Asc Bale weight: approx. 500 kg Machine weight: approx. 8000kg The hydraulic unit is functional, the drive motor is in the removed state.

Condition: new, Year of construction: 2023, machine/vehicle number: 7YXXX, VIS G is the ideal and the most efficent solution for serap processing like stampings, trimmings, wires mostly recommended for the automotive industry, metal recyclers and non-ferrous metal remelting industry. Tedpfsmqi Akjx Al Aec

Year of construction: 2009, condition: like new (used), Press with container Engine 5,5 kW 400 V Todpfx Aofhb Tisl Aec

Condition: excellent (used), Continuous horizontal press, to compact and pack materials such as cardboard, paper, plastics and others. IMABE IBERICA brand, pressure 125TN, loading mouth 1800 * 1000mm, with blades on the top of the compaction carriage that allows cutting the excess material above the compaction tunnel. Tsdpjv U R Agefx Al Asc Folding compaction tunnel, both at the top and on the sides, for greater retention of the material, outlet for bullets of dimensions 1050 * 1100mm and adjustable length. Automatic tying system, lateral, by 5 wires, for high production 30-35ton / hour. Fully rebuilt and revised in 2019

Condition: new, Brugger HX14 shredder - compact, powerful and ready for use anywhere! The Brugger HX14 shredder combines maximum performance with impressive mobility. With its powerful 25 HP petrol engine and the ability to effortlessly shred branches and trunks up to 14 cm in diameter, it is the perfect choice for demanding gardening and landscaping projects. Thanks to its compact design and road approval, the HX14 can be transported quickly and easily anywhere - whether in the garden, on construction sites or to remote locations. Efficiency and flexibility in one device! Your advantages at a glance: Todpfx Ajvpfutsl Aoc • Powerful: 25 HP petrol engine for powerful shredding • Large capacity: Processes branches and trunks up to 14 cm in diameter • Compact design: For easy handling and space-saving transport • Mobile and flexible: Ready for use anywhere with a trailer and road approval • Ideal for professionals and demanding projects: Reliable and durable for daily use The Brugger HX14 - your powerful partner for maximum mobility and efficiency! Dqqhzd Technical data: • Dimensions - 274 x 125 x 175 cm (l x w x h) • Weight - 383 kg • Blade - 2.36 cm wide • Max. diameter - 14 cm • Processing/h - 10-14 m³/h • Feed hopper on the drum - 36 x 14 cm Contact us for a tailor-made offer!

Condition: used, Dimensions: L 6990 mm, W 2500 mm, H 2720 mm. Weight 4191 kg. Tipping device for 140-660 l containers Todpfxsvkn Nvj Al Aoc

Condition: ready for operation (used), HSM V-Press 860 baler, year 2008–2009, price: €5,800 Pressing force: 54 kN Specific pressing force: 63.46 N/cm² Drive power: 7.5 kW Cycle time: 25 s Loading height: 1,110 mm Feed opening width x height: 1,195 x 650 mm Bale dimensions (L x W x H): 1,200 x 780 x 1,200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1,797 x 1,247 x 2,985 mm Machine weight: 2,008 kg Binding material: wire Materials processed: foil, mixed paper, cardboard, die-cut waste, textiles, Big Bags, polystyrene HSM V-Press 860 plus, year 2013–2015, price: €8,000 HSM V-Press 860 L, year 2015, price: €9,000 HSM V-Press 860 plus, year 2019, price: €9,000 HSM V-Press 860 plus, year 2024, price: €10,000 HSM V-Press 860, new/ex-demo, year 2020, price: €13,000 4-fold bale wire tying Bale dimensions (L x W x H, mm): 1,200 x 800 x 1,000–1,200 Bale weight: approx. 500 kg Technical data (L x W x H, mm): 1,213 x 1,824 x 2,987 Feed opening (mm): 1,200 x 565 Cycle (s): 35 Pressing force (t): 54 Tedpfx Asra Rbgol Asc Power supply (V): 400 (three-phase) HSM V-Press 860 plus B, year 2020, price: €14,000 Pressing force: 594 kN Voltage/Frequency: 400 V/50 Hz Drive power: 4 kW Feed opening width x height: 1,500 x 651 mm Bale dimensions (L x W x H): 1,500 x 780 x 1,200 mm Bale weight: 550 kg Feeding type: Manual Machine dimensions (W x D x H): 2,099 x 1,245 x 2,985 mm Machine weight: 2,336 kg Binding material: wire Material processed: foil, cardboard Idle cycle time: 25 s

Condition: reconditioned (used), Year of construction: 1995, operating hours: 18,000 h, functionality: fully functional, overall weight: 7,500 kg, rotor diameter: 370 mm, number of blades: 71, rotor length: 2,500 mm, power: 75 kW (101.97 HP), rotational speed (max.): 130 rpm, filling opening width: 1,450 mm, filling opening length: 2,500 mm, year of last overhaul: 2026, warranty duration: 12 months, input voltage: 400 V, blade width: 40 mm, Intake length: 1450 mm Intake width & rotor length: 2500 mm ᴓ rotor: 370 mm nº of cutters: 71 un (40x40 mm) Todsrrhczspfx Al Aec Rotor speed: 118 rpm Motor: 75 kW Voltage: 400 V Frequency: 50 Hz ᴓ screen: 30 mm Machine weight: 9000 kg Machine in operation