Used Wall Scales for sale (7,989)

Condition: used, maximum load weight: 12,200 kg, overall weight: 16,000 kg, first registration: 01/2016, loading space length: 7,240 mm, loading space width: 2,500 mm, loading space height: 2,400 mm, loading space volume: 43 m³, total length: 7,450 mm, total width: 2,600 mm, total height: 2,720 mm, Year of construction: 2016, Vehicle No. G0123006_1 – Manufacturer: Schmitz. * Floor: Aluminum floor * Double-deck configuration * Simple corner fittings * Rear door design: Rear portal doors * Contour marking, side/rear Bdedpfx Aez H Hfhjl Aeh * Refrigeration unit * Loading beams * Portal door with double twist-lock closures (external) * Forklift accessible * Front wall niche * Telescopic support legs * Temperature recorder * Temperature recorder * Locking rods on rear doors: 2 * Device for rail loading * Lashing points * ATP certificate – new. External thermometer / analog. Leakage test – new. Double-deck configuration without double-deck loading beams (available at an extra cost!). Financing available upon request. Financing possible. Flat fuel tank 60 L / Note: Flat tank extends the box!. Rear portal / portal door with simple twist-lock closures / external, made of stainless steel. Delivery time: IMMEDIATELY. Portal door with double twist-lock closures (external). Solar panel for monitoring start-up voltage – new. Technically ready for use, no further repairs required. Partial paint job. Temperature recorder / DATACOLD incl. printer. Temperature recorder test – new. Test run down to -18° C – ok!. Undercarriage galvanized. Valid safety inspection certificate. Safety inspection documents available. PAINT – NEW!!!. Available in multiple units!. Dimensions are approximate. Offer subject to change; sale is subject to prior sale. Prices are net ex works D-59302 Oelde. Further details available upon request by phone or email.

Condition: used, Core Weighing Performance • Maximum Capacity: 35,000 g (35 kg) • Readability / Scale Interval: 0.1 g • Tare Range (Subtractive): -35,000 g • Maximum Linearity: < ±0.2 g • External Calibration Weight: 10 kg (Class F2 or better recommended) Physical & Environmental Build • Weighing Pan Dimensions: 350 × 240 mm (Stainless steel flat pan) Bodpfoz Ic Stsx Al Ajdh • Overall Dimensions (W × D × H): 350 × 240 × 132.5 mm • Net Weight: Approx. 11.4 kg

Condition: new, functionality: fully functional, mileage: 30 km, power: 170 kW (231.14 HP), first registration: 04/2026, fuel type: diesel, empty load weight: 2,450 kg, maximum load weight: 1,050 kg, overall weight: 3,500 kg, tire size: 235/65 R16C, wheelbase: 4,325 mm, next inspection (TÜV): 09/2027, fuel tank capacity: 93 l, color: white, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 3, loading space volume: 21 m³, loading space length: 4,200 mm, loading space width: 2,200 mm, loading space height: 2,300 mm, Year of construction: 2026, Equipment: ABS, AdBlue, Bluetooth, USB port, additional headlights, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), full service history, immobilizer system, non-smoking vehicle, onboard computer, power assisted steering, power mirror, soot filter, spoiler, start-stop system, summer tires, traction control, truck registration, EU vehicle with factory warranty. Curtainsider vehicle Cargo space length: 4,200 mm Cargo space width: 2,200 mm Cargo space height: 2,300 mm Rear swing doors Euro pallet slots: 8 Payload approx. 1,050 kg Sprinter 315 CDI Wheelbase: 4,325 mm Arctic White Axle ratio: i = 3.923 HOLD function Multifunction steering wheel with three spokes Stabilization, Stage II Raised suspension: +30 mm front, +35 mm rear Steering wheel adjustable in two planes Reversal of lowered suspension Warning triangle LLP assessment without price protection Hill start assist Main switch for electrical installation Electrical pre-installation for trailer socket Preparation for installation of DAB digital radio AGM battery 12 V 95 Ah Preparation for PSM module installation Preparation for radio installation Easier engine start Preparation for Remote Services Plus Mercedes-Benz SoS system Roadside assistance Electrically operated and heated mirrors Fire extinguisher Overhead storage above windscreen Two cup holders Storage compartment under dashboard Wide mirrors for body widths of 2,300 - 2,488 mm 9G-TRONIC automatic transmission TEMPMATIC semi-automatic climate control Speedometer with kilometer scale Outside temperature display Crosswind assist Communication module with SIM card 93-liter fuel tank Fuel filter with water separator SCR exhaust aftertreatment system, 4th generation Remove parking lights Automatic light control system Pre-installed wiring for side marker lights Adaptive brake light Alternator 14V/250A Vehicle compatible with HVO fuel ECO start/stop function EURO VI emission standard – heavy-duty displacement EURO VI E – OBD Level E Cruise control OM 654 DE 20 LA 110 kW (150 hp) at 3,800 rpm Additional pulley (A/C compressor) Reinforced longitudinal members Rear crossmember bolted to frame Tow bar prepared for trailers up to 3,500 kg Spare wheel carrier under rear frame Spare wheel Tyres without manufacturer restriction Bdjdpfxjvdp Duj Al Ajh Tyres 235/65 R16 C Summer tyres Tyres with reduced rolling resistance Steel rims 6.5 J x 16 Armrest for driver’s seat Dual-passenger bench seat Driver airbag Cab rear wall trim Smoker’s package First-aid kit Black Maturin upholstery COC document Weight variant: 3,500 kg Engine noise insulation VIN – encrypted data with check digit Minimum reference mass: 2,611 kg WLTP control code Model year: 3 Model generation: 0 Hydraulic tail lift N1 truck homologation National EU version Manufactured in Ludwigsfelde ECE version - Available in approx. 3–4 weeks. - Delivery, leasing, or financing available. - Contact: Auto-Wardenga Irenäus Wardenga

Condition: ready for operation (used), PRODUCT INFORMATION Total weight (standard jib, without accessories): 64.5 kg (142 lb) Lifting capacity (SWL): Regular jib: 227 kg (500 lb); Extended jib: 130 kg (287 lb) Battery pack weight: 5.0 kg (11 lb) Turning diameter: 1222 mm (48 in) Minimum door requirement: Standard Base (KMCS…) & Low Height Base (KMCL…): 717 mm (28.25 in); Extra Low Height Base (KMCEL…): 770 mm (30 3/8 in) Operating forces of controls: 2.5–3 N ELECTRICAL Degree of protection: IPx7 (Hand control), IP24 (MAXI MOVE) Internally powered: 24 Vdc Battery type: Rechargeable (Sealed Lead Acid) Battery capacity: 24 Vdc, 4.0 Ah to 5.5 Ah Battery charger input (part #NDA8200): 100 to 240 Vac / 50 to 60 Hz Up and down current limiting: 12 ± 1 Amp Duty cycle: 15% (max. 2 min continuous use) Sound power level (up): 61.9 dBA Sound power level (down): 61.7 dBA Medical equipment classification: Type BF protection (IEC 60601-1 compliant) Bdodpfxexvxf Io Al Ash COMPLIANCE / WARNINGS Compliance: IEC 60601-1-2 (Electromagnetic Compatibility), ISO 10535 (except with stretcher) RF communication warning: Keep portable RF equipment at least 30 cm away from device DIGITAL SCALE SPECIFICATIONS Weight range: 227 kg (500 lb) Display resolution and type: 0.1 kg (0.2 lb), liquid crystal display Accuracy (in service): • 2–50 kg ±50 g / 4–110 lb ±0.1 lb • 50–200 kg ±100 g / 100–440 lb ±0.2 lb • 200–227 kg ±150 g / 440–500 lb ±0.3 lb OPERATION AND STORAGE CONDITIONS Ambient temperature range: Operation: 5° to 40°C (+41° to +104°F); Storage: -25° to 70°C (-13° to +158°F) Relative humidity range: Operation: up to 93% (non-condensing); Storage: up to 93% (non-condensing) Atmospheric pressure range: Operation: 795 hPa to 1060 hPa (2000 m max); Storage: 500 hPa to 1060 hPa Comes with a wall-mounted charger block, and strap. We have 4 pcs in stock with fully functional battery. Good working condition. Please check out our other listings as well.

Condition: new, Year of construction: 2026, CORMAK RBM 30HV Tube and Profile Bending Machine The CORMAK RBM 30HV tube and profile bending machine is a versatile three-roll, non-mandrel bending machine designed for professional bending of steel tubes, rectangular hollow sections, and solid bars. Its compact design, ability to operate in both vertical and horizontal positions, and precise upper roll adjustment make it an ideal solution for workshops, production facilities, and service companies where reliability, accuracy, and application flexibility are essential. Main Advantages of the Machine Non-mandrel bending system – enables bending without deformation of the cross-section, including applications requiring larger bending radii. Vertical and horizontal operation capability – provides flexibility in machine positioning depending on the workspace and production process. Precise upper roll adjustment with vernier scale – allows repeatable and controlled bending operations. Ground and hardened guide rolls – ensure accurate material guidance and long service life of working components. Hardened steel rolls – provide high wear resistance and maintain accuracy during long-term operation. Foot pedal control – enables convenient and ergonomic machine operation. Two-direction roll rotation – allows bending of complex shapes and closed arcs. Construction and Technology The CORMAK RBM 30HV is built on a rigid steel frame that provides resistance to deformation during bending operations. The 30 mm diameter rolls are made of hardened steel, ensuring durability even when working with demanding materials. The adjustable upper roll allows precise setting of the bending radius, while the 0.75 kW drive motor provides sufficient working force while maintaining compact machine dimensions. The machine can operate in both vertical and horizontal configurations, depending on the type of material being processed and available workspace. Precision and Work Efficiency Thanks to the three-roll bending system and precise pressure adjustment, the CORMAK RBM 30HV tube and profile bender provides high bending accuracy, even when processing thin-walled steel tubes and delicate closed profiles. The ability to rotate the rolls in both directions significantly simplifies the production of complex curves and spiral-shaped elements. The rotation speed of 9 rpm ensures an optimal working pace while maintaining full control over the bending process. Applications The CORMAK RBM 30HV is designed for light and medium-duty production and service applications. It is particularly suitable for: metalworking and fabrication workshops, light steel structure manufacturing, tube and profile fabrication in the furniture and fencing industries, production of decorative and functional shaped components. Standard Equipment Side guide rolls Foot pedal control system Technical documentation (DTR) in Polish CE Declaration of Conformity Technical Specifications Parameter Value Round tube capacity 30 × 1 mm Rectangular profile capacity 30 × 30 × 1 mm Round bar capacity 16 mm Solid rectangular bar capacity 30 × 10 mm Roll diameter 30 mm Roll speed 9 rpm Bedsu Snlkspfx Al Ajdh Motor power 0.75 kW Power supply 3-phase, 400 V Dimensions (L × W × H) 1200 × 750 × 1210 mm Weight 252 kg Manufacturer: CORMAK

Condition: good (used), Used stainless steel mixing vessel Article number: 10522 Quantity: 3 Last application: Chemical industry Volume: approx. 1000 liters Type: Standing on 3 rollers Material (in contact with media): 1.4571 / AISI316 Design: Single-walled Dimensions of vessel: Bedjgw Shyspfx Al Asdh Outer diameter: 1400 mm Cylindrical height: 970 mm Height of legs: 310 mm Overall height: 1660 mm Overall width: 1395 mm Overall length: 2000 mm Materials: Inside: 1.4571 / AISI316 Outer parts: 1.4301 / AISI304 Features: Nameplate: no Distance from outlet to bottom: 485 mm Outlet diameter: 15 mm Liter scale inside Agitator: yes

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting width (max.): 1,030 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 45 °, height adjustment type: electric, TECHNICAL DATA - Demonstration machine from showroom Roller carriage length 3200 mm Cutting length 3400 mm Cutting height max. 155 mm at 90° / 105 mm at 46° Cutting width, rip fence 1030 mm Saw blade max. Ø 450 mm Saw blade, retractable under table Ø 400 mm Table size, cast iron table top 1200 x 655 mm Table extension plus 750 x 655 mm Table widening 1200 x 655 mm Table height +/- 20 mm 900 mm Speed, main saw blade 3000 / 4000 / 5000 / 6000 RPM Net weight approx. 1051 kg TECHNICAL DESCRIPTION Bdodpfx Asgz Hx Dol Ajh Solid German engineering For trimming, cutting to length, formatting, miter cutting, etc. Dimensionally stable and self-supporting machine body, constructed as a robust frame welded from thick-walled steel profiles, laser-cut steel sheet metal parts and mechanically processed. The torsion-resistant and finely planed cast iron table top is mounted on the machine body. The robust and powerful sawing unit installed in the machine stand guarantees precise saw cuts. The complete saw arbor unit is dynamically balanced, double-guided swivel segments made of gray cast iron with double column guidance for height adjustment as well as the 2-fold ball-bearing long circular saw arbor ensure absolute smooth running. The ball-bearing double roller carriage is easy to move and maintenance-free. Precise and backlash-free running over the full length, guided with hardened and ground round steel guides with remote locking in a 50 mm grid. Stable and yet light cross slide made of steel profiles with a support roller on the outer narrow side, cross slide widening on the wide side extendable up to 250 mm Length stop on the cross slide with mm scale and telescopic extension extendable up to 3500 mm; with 2 robust and backlash-free adjustable stop flaps, 1 end stop with support for long strips; length stop can be used as an angled miter stop on both sides, continuously adjustable from 0° to 46° with mechanical length compensation; all common miter angles (15°, 22.5°, 30°, 45°) can be quickly set using a locking system. Rip fence with cutting width 1030 mm to the right of the saw blade with fine adjustment, easily adjustable and lockable manually, dimension indication via a clearly legible mm scale on an adjustable ruler carrier. Table widening 1200 x 600 mm and table extension 750 x 655 mm Operation on the machine body with a 4.3" touchscreen control for cutting height, swivel adjustment and speed. Electromotive height and swivel adjustment via push buttons. Swivel range of the saw blade from 0° – 46° APA saw blade quick-change system Speed, main saw blade 3000 / 4000 / 5000 / 6000 RPM Protective device can be swiveled away to both sides, protective cover with interchangeable insert wide/narrow for saw blades up to Ø 450 mm Push-button operation with electronic soft start (start/stop) Electronic, wear-free motor brake Saw blade Ø 400 mm, retractable under table Dust extraction connection Ø 120 mm on the machine body, Ø 80 mm on the protective cover Roller carriage, length and width stop profile anodized CE compliant GS tested

Condition: used, water tank capacity: 40,000 l, V2A stainless steel tank, upright, wine tank/fruit juice tank, Rieger - used - Volume approx. 40,000 liters Diameter approx. 2,800 mm cyl. Height approx. 5,800 mm Total height approx. 7,400 mm Weight approx. 1,000 kg Outer surface: marbled Inner surface: 2B=IIIC ground Top end: Torispherical head 2 crane eyes Central threaded weld-on connection DN 100 to DN 40 with threaded connection DN 50 with vent valve DN 50 and check valve DN 50 Sprinkling ring Tank cylinder: Level indicator with bar, scale, and standpipe valve DN 15 Manhole 420x320 mm Test tap DN 15 1 ladder hook at the top Immersion stem sleeve for temperature display Downwardly extending CIP line with vent line DN 40 with connecting thread DN 50 Clear drain with angled seat valve DN 50 Cooling line CIP ball Underbody: Torispherical bottom Floor-mounted bottom bead with DN 50 angled-seat valve, flush with tank wall Floor-mounted outlet with butterfly valve/ball valve/angled-seat valve, DN 50 outlet pipe with flange Five spherical feet, height-adjustable, with washers Bdedpfxowlg Dao Al Aoh Otherwise, as per photos

Condition: used, water tank capacity: 20,350 l, Rieger V2A stainless steel vertical wine/fruit juice tank - used - Volume approx. 20,350 liters Diameter approx. 2,000 mm cyl. Height approx. 6,000 mm Total height approx. 7,400 mm Outer surface: marbled Inner surface: 2B=IIIC ground Top end: Torispherical head 2 crane eyes Central threaded weld-on socket DN 100 to DN 40 with threaded socket DN 50 with fermentation lock valve DN 50 and check valve DN 50 Sprinkling ring Tank cylinder: Level indicator with bar, scale, and standpipe valve DN 15 Manhole 420x320 mm Test tap DN 15 1 ladder hook at the top Immersion stem sleeve for temperature display Downwardly extending CIP line with vent line DN 40 with connecting thread DN 50 Clear drain with angled seat valve DN 50 Cooling line CIP ball Bottom end: Bdodpfx Aswlg Hnol Aeh Torispherical head to Front-drawn bottom rim with DN 50 angle seat valve, flush with the tank wall Front-drawn outlet with butterfly valve/ball valve/angle seat valve, DN 50 outlet pipe with flange 4 height-adjustable spherical feet with washers Otherwise, as per photos

Condition: ready for operation (used), Year of construction: 2014, spindle speed (max.): 3,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,500 mm, spindle motor power: 20,000 W, total height: 1,900 mm, total width: 2,100 mm, overall weight: 3,500 kg, controller manufacturer: HEIDENHAIN, controller model: MANUAL plus 620, product length (max.): 3,300 mm, number of axes: 3, Horizontal turning machine manufactured in 2014. This SEIGER SLZ 500E features a center distance of 1500 mm and a swing diameter over the bed of 500 mm. It is equipped with a powerful main drive of 20/25 kW and a maximum spindle torque of approximately 1400 Nm. If you are looking to get high-quality turning capabilities, consider the SEIGER SLZ 500E machine we have for sale. Contact us for further details regarding this machine. Bdjdpfx Alozvx Ags Aoh - Spindle Speed: 1 - 3,000 RPM (Stage 1: 1 - 750 RPM, Stage 2: 1 - 3,000 RPM)- Spindle Power (100/60% ED): 20 / 25 kW- Taper Size: DIN 55027 Size 8 (Main Spindle Nose) / MT 5 (Tailstock Quill)- Tool Stations: 8-station Sauter disc turret + Parat 4-way quick-change holder Size 3- Through-Spindle Coolant: No- Counter Spindle: No- Max. Bar Diameter: 78 mm (through Schunk chuck) / 93 mm (spindle bore)- Max. Workpiece Diameter: 500 mm (swing over bed) / 280 mm (swing over cross slide)- Max. Tool Weight: No info- Driven Tools: Yes (Sauter 8-station disc turret for driven tools, VDI shaft D=30 mm with digital servo motor)- Positioning Accuracy: According to DIN 8605- X-axis Travel: 260 mm- Z-axis Travel: 1500 mm (center distance)- C-axis Specification: Pneumatically engaging with digital motor and gear drive on main spindle (Spindle speed up to 15 rpm, Torque ca. 420 Nm)- Bed Width: 350 mm- Turning Tool Cross Section (H x W): 25 x 25 mm- Spindle Diameter in Front Bearing: 130 mm- Inner Taper of Main Spindle: Metric 100- Maximum Spindle Torque: approx. 1400 Nm- Feed Force Z-axis: 10,000 N- Feed Force X-axis: 7,000 N- Feed Range (Longitudinal/Planar): mm/rev- Rapid Traverse Speed X/Z: 10 / 7 m/min- Tailstock Quill Diameter: 90 mm- Tailstock Quill Stroke: 180 mm- Max Workpiece Weight (Between Centers): 1,000 kg (1,250 kg with steady rest)- Max Workpiece Weight (Flying in Chuck): 300 kg (at 200 mm center of gravity distance)- Operating Voltage: 400 V / 50 Hz- Control Voltage: 24 V DC- Connected Load: 41 KVA- Current Rating: 60 A- Main Fuse: 63 A - Additional Equipment: - Chip protection wall, 2 movable sliding safety doors with windows, machine light, Quick-change tool holder size C, coolant device, live center MT 5, operator tool set, linear scale in X-axis, safety clutch in X and Z axes- Chip Conveyor: discharge height 1000 mm, length 535 mm, 60-degree gradient, continuous feed, ca. 250 dm³/h capacity, speed ca. 2 m/min- Two-speed Planetary Gearbox: Item 6054375, automatically shifting, flanged on main spindle motor- Parat 4-Way Turret Quick-Change Holder: Size 3, manually operated, mounted on zero-point clamping system- Sauter 8-Station Disc Turret for Driven Tools: VDI shaft D=30 mm with digital servo motor, mounted behind turning center- Boring Block: with VDI 50 retainer and internal coolant supply, mounted on zero-point clamping system in front of turning center- Zero-Point Clamping System: base part mounted on cross slide- Hydraulic Hollow Clamping Unit: Schunk ROTA THW plus D=315 mm 3-jaw chuck with DIN 55027 Size 8 mount and 78 mm bore passage- Reinforced Coolant Pump: (2.5 bar at 40 L/min, max 5.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, workpiece weight (max.): 200 kg, temperature: 220 °C, heating capacity: 115 kW (156.36 HP), workpiece height (max.): 1,500 mm, workpiece length (max.): 3,000 mm, Powder coating system, manual operation, with 3-zone pre-treatment & cross conveyor Turnkey powder coating system with stainless steel pre-treatment. Maximum flexibility for your production: Cascaded 3-zone pre-treatment including deionized water treatment, energy-efficient oven (gas or electric), and robust conveying system with cross movement. Complete with assembly & training – individually adaptable to your hall dimensions/product range and requirements! For sale: a well-conceived concept for a turnkey, manual powder coating system. The system combines a wet chemical pre-treatment in stainless steel design, a walk-in powder coating booth, an energy-efficient drying and curing oven, and a flexible conveying system with cross movement. All components are designed as a modular basic concept. The system components: 1. Chemical 3-zone spray pre-treatment (stainless steel) process: 1. Degreasing/phosphatization (electrically heated, 72 kW) 2. Rinse with city water 3. Rinse with deionized water Construction: - Robust walls and treatment tanks made of high-quality stainless steel AISI 304. Bdedpfx Alszu Rpij Ash Equipment: - Automatic cascade refill system to optimize water consumption, chemical-resistant and adjustable nozzles, oil skimmer to extend the service life of the degreasing bath, automatic dosing unit, and a powerful exhaust fan (5,000 m³/h). Water treatment: - Including integrated reverse osmosis system (300 l/h) with a 2,500-liter tank and PLC control for consistently high rinsing water quality. - Max. component dimensions: 3,000 x 800 x 1,500 mm (L x W x H). 2. Combined tack water dryer & curing oven (thermoblock): - Working area: 3,500 x 2,000 x 2,900 mm (L x W x H) per oven with a usable opening of 2,000 x 2,200 mm (W x H). - Heating system: combined via gas (Riello BS2 burner, 82 kW) and/or electric (82 kW). - Insulation & recirculation: 180 mm rock wool insulation on walls and roof (100 mm on the floor). Inverter-controlled recirculation with 7,500 m³/h guarantees uniform heat distribution up to max. 220 °C. 3. Walk-in powder coating booth - Dimensions: Generous booth dimensions of 5,000 x 3,000 x 3,200 mm (L x W x H). - Extraction & filtration: Effective extraction capacity of 8,000 m³/h (5.5 kW motor) with 4 cartridge filters incl. auto. pulse air cleaning. In addition, an absolute pocket filter on the roof. 4. Conveying system with cross movement - Load capacity: 200 kg load capacity per carrier or up to 600 kg total load in the trolley. - Layout: Approx. 127 m of rail network including 2 trolleys for the cross-movement trolley, crossbars (L = 3 m) and pneumatic locking and unlocking units for ergonomic material handling. 5. Central Siemens PLC control - Central Siemens 7" color touchscreen: all temperature profiles, rinsing cycles, conveying sequences and extraction systems can be intuitively monitored and controlled. Individual customization options: Since every B2B project is unique, the configuration shown can be customized in almost all parameters: Free scaling of all usable dimensions (L x W x H) of pre-treatment, ovens, and booth. Adjustment of the conveying system to your hall geometry and higher load capacities. Heating type (pure gas, pure electric, or hybrid) can be freely selected. Extension of the pre-treatment zones (e.g., passivation, demineralization).

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 100 mm weight 466 kg SIEGMUND authorized dealer - all items available! Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Distance between holes in side wall 25 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 2400 x 1200 x 100 mm - Plasma nitrided 750 version with scale Bsdpfx Alsxaablo Ajdh - incl. 6x base equipment

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 100 mm weight 499 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures. The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 2400 x 1200 x 100 mm - Extreme plasma nitrided version with scale - Sidewall with diagonal grid Bdjdpjxaab Ejfx Al Aeh - incl. 6x base equipment

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 200 mm weight 1069 kg dimensions of the machine ca. 2400 x 1200 mm SIEGMUND authorized dealer - all items available! The welding tables are provided with a scale as standard. Special set - including 28 tool set 3 Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 28 mm - Surface holes in a diagonal grid - Rounded corners, edges and holes - Height of side wall 200 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Bdedpfxexabffe Al Aeh Furnishing: - 28 hole pattern / dimensions 2400 x 1200 x 200 mm - Plasma nitrided Extreme 8.7 version with scale - Diagonal grid on the table surface - Diagonal grid on the side wall - Including 4x basic equipment - incl. 28 tool set 3: + 10x 280610.N clamp + 6x 280630.N clamp + 4x 280648.1.N prism + 24x 280510 bolts + 4x 280740 magnetic bolts + 8x 280410.N stop + 8x 280420.N stop + 6x 280110.N angle + 2x 280152.N angle + 2x 280162.N angle + 1x 280166 + 67.N angle + 1x 283999 accessory set

Condition: new, Year of construction: 2026, Dimensions: 2000x1000mm Bjdpfx Aljy T N Nuo Aedh Side wall: 200mm Weight of the table: approx. 370 kg Load capacity: 2 000 kg Number of legs: 4 Sturdy and solid construction Highest quality finish Perfect flatness of the table [+/- 0.5 mm per meter] Material S355J2+N System of holes 16 or 28 in a grid of 100 x 100 mm Three rows of holes on the side walls Chamfered and milled holes for easy tool mounting Engraved scale in 100 x 100 mm grid Height adjustment with standard feet approx. 880 - 930 mm Possibility of using stainless steel supports Possibility of connecting the tables for a larger working area All tables are reinforced with ribs Designed in accordance with the ISO 2768-1 standard Milled edges of the worktop Worktop thickness 12 mm Table legs made from 80x80mm profiles Load capacity: 500kg/leg*

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33902028859, empty load weight: 5,660 kg, maximum load weight: 29,340 kg, overall weight: 35,000 kg, axle configuration: 3 axles, total length: 13,700 mm, total width: 2,550 mm, total height: 3,700 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: red, Chassis, Semi-trailer, Transport Company Steel welded construction in reinforced design, only 2 longitudinal members as double T-beams with steel/diamond-plate between the longitudinal members, kingpin plate with replaceable 2" kingpin. Mudguard for tail lights. 8 pairs of lashing eyes screwed or welded to the frame, at the manufacturer's discretion. 24 tons, 2-speed support legs, single-sided operation, with straight lower part, without thrust compensation. Chocks with holder. Aluminum side impact protection. Galvanized steel underrun protection. Half-shell fenders with anti-spray flaps according to EC. 1 spare wheel holder for 1 spare wheel, with wheel fastening kit. 1 storage box recessed between the longitudinal members. 8 pieces of wood rack supports, at the manufacturer's discretion, screwed to the frame, each with 2 extendable wood racks from 1800 to 2800 mm, 7 tons per pair. Axles + Suspension BPW disc brake axles with 430 mm disc diameter. Air suspension with lift and lower valve, safety cable on the axles. 1st axle automatic lift axle, including forced lowering and starting aid, operated by "3x braking" (starting aid is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h). Axle spacing staggered 1410/1310 mm (combined transport) up to 44 tons total weight. Wheels and Tires 385 / 65 R 22.5" at the manufacturer's discretion. Steel rims, factory silver. Braking System 2-line pneumatic braking system. Spring-loaded parking brake. Axle load recognition via EBS-CAN bus signal, for display on the dashboard in the cab; the truck must be correspondingly prepared, no truck installation (no calibrated scale). 2 non-interchangeable coupling heads at the front, without connecting cable. EBS, electronic braking system with EBS socket at the front, without connecting cable. Note: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! "Safe Parking" Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides. 2 white position lights at the front. 2 white/red marker lights at the rear. 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front, without connecting cable. Front wall / corner posts Steel / grid front wall, approx. 2300 mm high, screwed to the frame. Approval / Signs Country of approval: Germany. Type approval according to EC 2007/46. Prepared for single-row license plate holder. Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear. Warning sign according to ECE - 70. Paint Frame: DB 7350 Novagrau (dark grey) Support legs: Black coated. Front wall: Hot-dip galvanized. Bedsza Anvepfx Al Asdh

Condition: used, This listing is for 1 of 4 Pall CSUH 040 Feed Retentate Bdodpoxv Dlyjfx Al Aoh The unit is in full working condition and is ready for immediate use Designed for optimum performance and product recovery, Centramate™ TFF cassette holders, part of the Pall filtration portfolio, are available in a variety of sizes to meet your application requirements. These holders support efficient concentration, purification, and buffer exchange of biomolecules, making them ideal for small batch production, process development, and Phase I clinical studies. Identical fluid path lengths ensure precise linear scale-up to larger process systems. Tool-free cassette removal simplifies workflows—no need to disassemble system plumbing. Available in: 316L Stainless Steel (Centramate system) for robust, high-performance applications. Ultra-High Molecular Weight Polyethylene (PE) (Centramate PE system) for a more economical yet durable alternative. A variety of membrane types and screen options are available for system versatility and application-specific performance.

Condition: used, functionality: fully functional, machine/vehicle number: 33095, mileage: 79,900 km, power: 315 kW (428.28 HP), first registration: 04/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6e, suspension: steel-air, loading space volume: 15 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, seat heater, traction control, truck registration, The mileage of the offered vehicles may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Weight variant 28 t, engine OM470, regulated water pump, disc brakes, Active Brake Assist, ABS, ASR, ESP, lane keeping assist, attention assist, traffic sign assist, hill start assist, reinforced front axle 9 t 3-leaf, air-sprung rear axle, rear axle 13 t with differential lock, steerable and liftable 9 t tag axle, daytime running lights, rain sensor, light sensor, trailer hitch Rockinger (D40), trailer hydraulics, tires: front axle 385/65R22.5, rear axles 315/80R22.5 M-cab ClassicSpace (width 2300 mm, tunnel 320 mm), driver's comfort suspension seat, co-driver's functional seat, multimedia cockpit, tinted windshield, sunroof, heated mirrors electrically adjustable, electric windows, comfort central locking system with central locking, multi-function steering wheel, multimedia radio touch with Bluetooth and navigation, digital tachograph VDO, trip computer, 12/24 V sockets in the co-driver's footwell, circuit breaker, battery main switch, pre-wiring for toll collection system, air conditioning, cruise control, speed limiter, waste heat recovery, compressed air connection in the cab, reversing camera, 2 rotating beacons on the cab roof, sun visor Bdodsz E Rh Depfx Al Ajh Total volume 15 m³, usable volume consisting of approximately 800 l fresh water tank and approximately 13 m³ sludge tank, tank wall thickness 6 mm, tank emptying via free outlet or by pressing with the vacuum pump, bottom flap over the entire cross-section hydraulically opens upwards, mechanical swivel locks, sealing of the closing base in NBR, one baffle plate in the tank, lower and upper suction connection with Perrot DN 100 and with pneumatically operated slide valve, level indicator sludge tank with float and external scale (division of 500 L), sight glass for water tank, outlet apron made of stainless steel, vacuum pump GardnerDenver RFW 200 (1250 m³/h) hydraulically driven, protection of the vacuum pump against over-suction, safety valve, combined oil separator with silencer, HD pump Pratissoli KT30 (80 l/min at max 175 bar) hydraulically driven, stepless pressure control, small hydraulic HD hose reel with approximately 40 m HD hose DN 13 and spray gun (with swivel joint), suction hose boxes on the right and left made of stainless steel, waste container mounted on the rear left side galvanized, lockable tool box on the right, ladder, control panel made of stainless steel LED-illuminated and lockable mounted on the rear right, remote control with the following functions: vacuum pump on/off, HD pump on/off, 4-way valve suction/equalization/pressure, transport hose reel up/down, lower suction connection on/off, upper suction connection on/off, engine speed +/- , emergency stop, transport hose reel hydraulically driven galvanized with approximately 40 m suction hose in DN 80, speed for rolling up/down can be adjusted continuously, 5x LED work lights (2 on each side and 1 at the rear). 1x rotating beacon at the rear, reversing camera, trailer suction line, trailer hydraulics.

Condition: used, functionality: fully functional, machine/vehicle number: 34162, mileage: 2,900 km, power: 315 kW (428.28 HP), first registration: 07/2025, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6e, suspension: steel-air, loading space volume: 14.7 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, traction control, truck registration, The mileage of the vehicles offered may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Weight variant 28 t, engine OM470, regulated water pump, disc brakes, Active Brake Assist 6, ABS, ASR, ESP, lane keeping assist, attention assist, traffic sign assist, Active Sideguard Assist 2, Frontguard Assist, hill start assist, reinforced front axle 9 t 3-leaf, air-suspended rear axle, rear axle 13 t with differential lock, steerable and liftable 8 t trailing axle, daytime running lights, rain sensor, light sensor, trailer coupling Ringfeder (D40), trailer hydraulic system, tires: front axle 385/65R22.5, rear axles 315/80R22.5 M-cab ClassicSpace (width 2300 mm, tunnel 320 mm), driver's comfort suspension seat, co-driver's comfort air suspension seat, multimedia cockpit, tinted windshield, sunroof, heated mirrors electrically adjustable, electric windows, comfort central locking system, multifunction steering wheel, multimedia radio touch with Bluetooth and navigation, digital tachograph VDO, trip computer, 12/24 V sockets in the co-driver's footwell, circuit breaker, battery main switch, pre-wiring for toll collection, pre-wiring for breathalyzer with immobilizer, air conditioning, cruise control, speed limiter, waste heat recovery, compressed air connection in the cab, reversing camera, 2 roof beacon lights on the cab roof, sun visor Total volume approx. 14.7 m³, cylindrical steel tank with curved bottoms in a vacuum- and pressure-resistant design, for a maximum operating pressure of 0.5 bar, fixed water chamber in the piston back for approx. 1000 l of fresh water, piston chamber can be used as a water chamber, piston chamber residual drain relocated to the rear for water use, extension piston with 3 piston positions, water/sludge approx. 1.0 m³/12.7 m³; 3.0 m³/10.7 m³; 5.0 m³/8.7 m³, hydraulically fully opening bottom flap and pipe break protection according to UVV, locking of the bottom flap with a hydraulically adjustable lug locking system, seal between the sludge tank and the bottom flap with a profile rubber seal (NBR quality), discharge apron made of stainless steel, sludge chamber level indicator with an internal float and an external scale graduated in 500 l steps, water chamber and piston chamber level indicators each by means of a glass tube, upper and lower suction and discharge connections DN 100 at the bottom with a pneumatically operated shut-off valve, vacuum pump (water-cooled) GardnerDenver RFW 200 (1180 m³/h) hydraulically driven, high-pressure pump Pratissoli KE 30 H (approx. 70 l/min at 130 bar) stepless pressure control, small hydraulically driven HD hose reel at the rear right of the superstructure for max. 80 m HD hose DN 13, 60 m HD hose DN 13 with hose guide and spray gun (with swivel joint) are installed, 4x LED work spotlights right, 4x LED work spotlights left, 2x LED work spotlights rear, 1x LED work spotlight on the boom (1x rear and 2x right and left), 2x LED roof beacon lights on the superstructure, suction hose boxes on the right and left made of aluminum, lockable toolboxes made of stainless steel, waste container mounted at the rear left, galvanized, aluminum ladder 3 m long, control panel made of stainless steel, LED-illuminated and lockable, mounted at the rear right, remote control, hose storage cassette for accommodating an 18 m long suction hose DN100, wall thickness 10 mm. Boom mounted on the side right of the tank cover, equipped with the fun Bdjdpfx Aez Hbvhjl Aeh

Condition: excellent (used), Pro-Cast Series Model 121-M HED International Pro-Cast Series Model 121-M 14" Wide Capacity Thin Ceramic Tape Casting Machine, 12' to 100' Tape Length, 0.001" to 0.125" Tape Thickness Capacity, 180 Degree C Design Temperature Rating. S/No. 14138 Please Note: Packing and Loading Fee of £1,500 (+ VAT if applicable) will be applied to the buyer's invoice. This lot is located at 33, Shaftesbury Street South, Derby, DE23 8YH. Working Width: 14 inches (approx. 356 mm). HED International Pro-Cast Series Model 121-M industrial thin ceramic tape casting machine, designed for the continuous production of high-quality ceramic and technical material tapes. Casting width: 14" (approx. 356 mm). Tape length capacity: 12'–100'.Tape thickness range: 0.001"–0.125" (approx. 25 µm–3.18 mm). Design temperature rating: 180°C. Suitable for ceramic tape casting and advanced technical ceramics. Suitable for laboratory, pilot-scale and production development applications. The Pro-Cast 121-M provides controlled casting of ceramic slurries over a wide range of tape thicknesses and is suitable for applications including technical ceramics, electronic ceramics, ceramic substrates, multilayer ceramic components and materials research. Bdsdpfxoz E Rtme Al Ajh

Condition: used, axle configuration: 3 axles, first registration: 10/2020, loading space length: 7,250 mm, loading space width: 2,350 mm, loading space height: 1,440 mm, total length: 8,700 mm, total width: 2,500 mm, total height: 3,000 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2020, Equipment: ABS, = Additional options and accessories = - EBS - Aluminum rims = Notes = Number of axles: 3, Tare weight: 5360 kg, Gross vehicle weight: 39000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Aluminum rims, Suspension type: Air suspension, ABS, EBS, Body construction year: 2020, Body material: Steel, Side wall material: insulated, Number of sides: 1, Tipper drive: PTO, Drum volume: 25, Drum volume in: m3, Axle type: SAF, lift axle, disc brake, 24m3, roll-over cover = Additional information = General information Cab: Day cab License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle configuration Bjdpsz Ha Ntsfx Al Asdh Tire size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Tire tread depth left: 5 mm; Tire tread depth right: 13 mm Axle 2: Tire tread depth left: 10 mm; Tire tread depth right: 12 mm Axle 3: Tire tread depth left: 6 mm; Tire tread depth right: 13 mm Weights Tare weight: 5,360 kg Payload: 33,640 kg GVWR: 39,000 kg Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Optical condition: average Damage: none Financial information Leasing price: €315 per month (default, 60 months); Ask for more information and conditions = Company information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our offer includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large and rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Calculate your leasing rate quickly and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: good (used), mileage: 77,930 km, power: 118 kW (160.44 HP), first registration: 12/2021, fuel type: diesel, tire size: 215/75R16, axle configuration: 4x2, wheelbase: 4,030 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: other, number of seats: 3, total length: 6,950 mm, total width: 2,150 mm, total height: 3,350 mm, loading space length: 4,250 mm, loading space width: 2,020 mm, loading space height: 2,300 mm, Year of construction: 2021, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power mirror, tail-lift, traction control, = Additional Options and Accessories = - Heated mirrors - Halogen lamp - None - Tail lift - Manual - Radio/cassette - Rear view camera - Fabric = Notes = Configuration: 4x2, Payload: 865 kg, Unladen weight: 2635 kg, Gross vehicle weight: 3500 kg, Cab type: Single cab, Cruise control, Air conditioning, Number of airbags: 1, Parking assistance: None, Electric windows, Electric mirrors, Radio/cassette, Carplay, Color: White, Heated mirrors, Rear view camera, Lighting type: Halogen lamp, Bluetooth, Engine power: 118 kW (158 hp), Fuel: Diesel, Euro: 6, Drive technology: Timing belt, Transmission type: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Body type: additionally extended, Side wall paneling, Roof rack: None, Rear closure: Tail lift, Central locking, Number of seats: 3, Seat arrangement: 1+2, Seat cover: Fabric, Seat adjustment: Manual, Tail lift, Tail lift design: Rear door, Tail lift load capacity: 750 kg, Tail lift manufacturer: Dhollandia, Tail lift material: Steel and aluminum, Tail lift size: 210x145, closed cargo box, loading platform, spoiler, air conditioning, 77,000 km, Spare wheel, Spare wheel tread depth: 3% = Additional Information = Axle configuration Tire size: 215/75R16 Brakes: Disc brakes Axle 1: Tire tread depth left: 1 mm; Tire tread depth right: 1 mm; Suspension: Coil suspension Axle 2: Tire tread depth left: 2 mm; Tire tread depth right: 4 mm; Suspension: Leaf spring suspension Weights Unladen weight: 2,635 kg Payload: 865 kg GVW: 3,500 kg Functional Tail lift: Dhollandia, Rear door, 750 kg Loading area height: 95 cm Maintenance APK (Technical Inspection): valid until 08.2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 3 Financial Information Leasing price: €365 per month (delivery van, 72 months); Ask for more information and conditions Bedpjz Hkhmefx Al Ajdh Identification License plate: V-91-PZN

Condition: used, functionality: fully functional, machine/vehicle number: 33063, overall weight: 18,000 kg, first registration: 06/2024, loading space volume: 15.1 m³, suspension: air, color: orange, Chassis consisting of 2 BPW axles, 9 tons each, air-suspended, single-tire configuration, plastic fenders, disc brakes, automatic load-dependent all-wheel drive pneumatic braking system with WABCO EBS, front impact protection, underrun protection, drawbar length 2,200 mm with retaining spring. Bdsdpfx Asz Hxy Rel Ash The tank volume is 15.1 m³, wall thickness 6 mm, the usable volume of the sludge chamber is reduced to approximately 12.8 m³ by the extension piston. The full-size top lid can be opened hydraulically upwards, lid locking with hydraulically operated latch, galvanized. Upper and lower suction connections are manually operated in DN 100. Perot connection and blank coupling. Tank content indicator with internal float and external scale, display in scale divisions of 500 l for with and without piston. Aluminum discharge chute, emptying through free outlet, pressurization, or by means of the extension piston. Locking of the piston by means of a pair of manually operated locking bolts. 2 piston seals with pressure regulation in the control panel. Suction line routed on the right side. Hose boxes on the right and left sides of the superstructure, made of aluminum, designed for circumferential hoses. Lockable plastic tool box. Control panel made of stainless steel at the rear right. 1 LED rotating beacon on the rear of the superstructure, 1 LED ambient lighting each on the left and right sides and at the rear of the tank with one LED spotlight each.

Condition: used, completely stainless steel Suitable for direct steam injection (4 points at the bottom of the conical base) Operating temperature 125°C Operating pressure 2.5 bar Insulated (bottom + walls) Manhole DN500 Internal diameter 2,000 mm Boiler height with closed lid ± 3.000 mm Boiler height with open lid ± 4.150 mm Suitable for CIP Total volume of contents 4,840L Total dimensions: (L x W x H): ± 3.000 x 2.400 x 3.200 mm Hydraulically operated lid + Hydraulic unit in good condition electric control box not included Bdodpfxjz Hv Dme Al Aoh

Condition: used, axle configuration: 3 axles, first registration: 09/2015, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 2,960 mm, total length: 14,100 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 445/45R19,5, wheelbase: 8,940 mm, color: other, Year of construction: 2015, Equipment: ABS, = Additional Options and Accessories = - EBS = Notes = Number of axles: 3, Payload: 32,200 kg, Tare weight: 6,800 kg, Gross vehicle weight: 39,000 kg, Chassis type: Full chassis, Kingpin size: 2 inches, Suspension type: Full air suspension, ABS, EBS, Body construction year: 2015, Material of side walls: Tarpaulin, Customs cord, Sliding roof, Axle type: BPW = Additional Information = General Information Cab: Day cab License plate: ON-93-XX Drivetrain Fuel type: Diesel Transmission Transmission: Manual Axle Configuration Tire size: 445/45R19.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Tire tread depth left: 12 mm; Tire tread depth right: 8 mm Axle 2: Tire tread depth left: 12 mm; Tire tread depth right: 11 mm Axle 3: Tire tread depth left: 12 mm; Tire tread depth right: 11 mm Weights Tare weight: 6,800 kg Payload: 32,200 kg GVW: 39,000 kg Functional Sliding roof: Yes Environmental Emission class: Euro 0 Condition Overall condition: fair Technical condition: fair Optical condition: fair Damage: none = Company Information = Kleyn Trucks is one of the world's largest independent used vehicle dealers. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognizable quality • A good price Bdedjzv Dyqopfx Al Ash • Honest business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty package.