Used Waste Shredder for sale (4,068)

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 900 h, functionality: fully functional, HAAS Tyron 2000 XL 2.0 Year of manufacture: 2023 Iodpfx Adom H T R Ejisa Approx. 900 operating hours - Crawler undercarriage - Scania diesel engine 294kW / 400HP – emission stage V - Fine tool configuration 9/9/4 - Neodymium overband magnet, hydraulically height-adjustable - Generous tilting hopper - AWG approval under §52 The machine is suitable for waste wood, green waste, roots, and various types of waste...

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 5020, power: 45 kW (61.18 HP), Stationary wood chipper with 45 kW electric motor. The Hackkontrol HC 960 control system was replaced two years ago. This control regulates feed-in when the speed drops and can be adjusted as needed. The wiring in the connection box was also overhauled two years ago, so the chipper can be connected using a cable with a minimum of 100 Ah, preferably 125 Ah, and can be put into operation directly. The chipper is robustly constructed and fully operational. Machine documentation is available and spare parts are still readily obtainable. Isdpfxexy Rrzs Adiea

Condition: as good as new (ex-display), Demonstrator with 7 operating hours Another machine available immediately (ex works in Neckartailfingen) MRZ 830 Shredder Custom tariff number: 84659600 Feed opening 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multi-rotatable Hydraulically operated slide gate Screen perforation of your choice (10 - 40 mm) Weight approx. 1,600 kg Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm Turbo clutch Included as standard: - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet Isdpfxov Sqrpj Adioa - CE compliant . The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer. Included: - Raise the shredder by 30 cm (prepared for conveyor belt) Additional shredder options: - Articulated conveyor belt + €8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet + €6,780 net - Conveyor belt and overbelt magnet control + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: like new (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 8797630001, input voltage: 230 V, total height: 2,000 mm, We are selling a Riedel - Glen Dimplex universal water-to-water cooling interface for utilizing waste heat recovery from machinery. Year of manufacture: 2017, but it has only been in use for approximately 2 years. Item designation: 2KTE080G. New price approx. €8,000 net. Inspection is possible. Sale against advance payment, without warranty or return. Iodpjvb Dhpofx Adiea

Condition: used, machine/vehicle number: 13398, Rotor diameter: 300 mm Rotor width: 1400 mm Ijdpsxtgkmofx Adioa Rotor knives: 76 / 114 Stator knives: 1 row Infeed opening approx. 1400 x 1050 mm Drive motor: 2 x 30 kW

Condition: good (used), Year of construction: 2006, Chipper with rotor width 800 mm Rotor diameter 368 mm with 40 knives Ijdpfsxyud Iox Adioa Motor 22 kW Only 850 operating hours

Condition: new, Year of construction: 2025, functionality: fully functional, rotor diameter: 480 mm, number of blades: 84, rotor width: 1,500 mm, power: 150 kW (203.94 HP), rotational speed (max.): 80 rpm, Genox BH1500L - Heavy Duty Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. 150kW (2x75kW) Drive power with VFD motor controllers and heavy duty oversized gearboxes, 80rpm shaft speed. 1500mm wide x 480mm diameter Rotor with 84pcs, 40mm Concave reversible alloy steel blades. Ijdpfx Aoxwqm Todija Hydraulic force feeding of material according to motor loading and timers. Parameters can be easily configured on site to suit the materials being processed. Output size is controlled by replaceable screens mounted beneath the rotor shaft in hydraulic operated screen support cradle. This is an ex-display machine used only for show at a recent exhibition and is available immediately, ex-works our EU Workshop based in Frankenthal, Germany.

Condition: good (used), Year of construction: 1995, shredding by 3 HARDOX-coils (spirals) diameter x length: approx. 500 x 1.700 mm opening: approx. 1.100 x 1.700 mm Ijdpol I Dx Nofx Adisa new base frame with steel construction new feed-hopper 8 m³ new control cabinet incl. 7 unused spare coils

Condition: good (used), Wood shredder for sale Prepared for conveyor belt removal Ideal for shredding wood residues (all types of softwood) and pallets Includes hydraulic pusher Motor: 7.5 kW Rotor width: approx. 82 cm Iedpfx Aexbyx Tedija Weight: 1,460 kilograms Full load current: 32 amp Main fuse: 35 amp

Condition: excellent (used), GROSS GAZ 62 shredder 15 kW motor, Rotor length: 600 mm, 14 knives on the rotor, Hydraulic drawer 0.75 kW 20 mm screen, Rotor diameter: 252 mm Autoreverse, Sharp knives on the rotor and counter-knife Weight: 1300 kg Year of manufacture: 2016, only 250 operating hours Iedjxzfbgopfx Adija

Condition: excellent (used), functionality: fully functional, WOOD SHREDDER machine model MION e MOSOLE TR 2 second hand machine machine operation in automatic and/or manual mode working condition : Excellent In automatic mode, the motor starts in the opposite direction to free the pusher from any residues from previous work. after about 5 seconds ( in fully automatic mode ) the motor stops and restarts in the correct direction for continuous processing (see the video). technical details : hydraulic pusher lengthh rotor mm.700 Iedpfxjw Hwpvj Adiea rotor diameter mm.300 rotation speed of the rotor rpm 100 hopper content 3,42 m³ main motor power Hp 25 (kw 18) hydraulic power unit motor pusher Hp 1 interchangeable knives Feeding from top

Condition: excellent (used), CATALOG NUMBER 7726 TECHNICAL DATA - Feed hopper inlet – hydraulic lift 1200x1000mm - Discharge outlet for shredded wood diameter 200mm Iodjw Tbw Aepfx Adioa - rotor working width 980mm - Main motor 37kW - Number of knives 52 pcs - Knife size 40x40mm - Screen 20/25mm - Pressing drawer (hydraulic pusher) - Electric auto-reverse - Dimensions (L/W/H) 2520x2000x1740mm - Weight approx. 2500kg ADVANTAGES – German made – Screw conveyor (for wood chips) – Pressing drawer, serrated – Knives as new – New counter-knife – Very good condition – Used chipper Net price: 106,900 PLN Net price: 25,450 EUR depending on exchange rate 4.2 EUR (Prices may vary with significant fluctuations)

Condition: excellent (used), functionality: fully functional, power: 37 kW (50.31 HP), color: green, shaft length: 600 mm, Pre-shredder, chopper, shredder Manufactured by Piranha for wood and plastic Iedpfx Asxruv Uediea Motor 37 kW Shaft length 600 mm with 3 x 5 cutting blades with 35 mm screen with control unit

Year of construction: 2024, condition: new, functionality: fully functional, The copper wire granulator can recycle waste copper wire into separated copper and plastic, the process capacity is 100-180 kg/h, the dry physical crushing method does not produce pollution. The granulator is sold with a pre-shredder and a conveyor belt with magnet! Design and manufacture 99.99% excellent efficiency and reliability, advanced technology: ● Airflow gravity sorting system to discharge the copper particles from the insulation. ● Strong vibration separator to separate the weight of the copper granules from the insulation Ijdju Tq S Hepfx Adija ● Self-cleaning dust collection system to reduce maintenance time and remove dust. ● The machine is compact and takes up little space ● 99.99 % copper purity recovery rate ● High reliability ● High productivity ● Robust and versatile ● Long service life ● Cost-effective Technical specifications Model GRS 180KG Current voltage 380V Power output 8,7 kW Frequency 50 Hz Processing capacity 100-180 kg/h Size of machine 80*137*204CM Net weight 518 kg

Condition: as good as new (ex-display), Year of construction: 2024, Special price for our demonstration machine Another machine, available now (ex works in Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of leftover wood and also pallet sections. The pallet would need to be prepared with a jigsaw or chainsaw so that it fits vertically into the hopper - see Figure 2. Ideally, it would be approximately 40x20x20 cm so that the wood can lie flat on the slider floor. This is where the machine works most effectively. A hydraulic slider runs at the bottom of the shredder, which pushes the wood against the rotor depending on the load. The material is shredded until it passes through the screen basket. Throughput up to 200 kg per hour *depending on the screen and how well the material is prepared. *Conveyor belt and overhead magnet available at an additional cost. Isdpfodwktkex Adiea + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent slide control, Customs tariff number: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 15, multi-rotatable Option: double row of blades + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutter opening: 630 x 820 mm Filling volume: approx. 0.6 m³ Hydraulic slide gate Screen perforation of your choice (10 - 30 mm) Suction nozzle diameter: 160 mm Weight: approx. 1,300 kg (depending on accessories) Dimensions (L x W x H): approx. 1,737 x 1,167 x 1,650 mm Moisture content: 30% dry Included as standard: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idling - Speed 70-90 rpm for high throughput - Cyclic control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant. - MADE IN GERMANY . Shredder options: - Raise shredder by 30 cm (prepared for conveyor belt) +€2,080 net - Articulated conveyor belt +€8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet +€5,980 net - Conveyor belt and overbelt magnet control +€2,750 net (Start and stop synchronized with the shredder) - Extend hopper +€940 net - Eco-rings: +€1,980 net (recommended for more than 15% hardwood) - Special scraper +€990 net (recommended for veneer or paper) - Double Knife series + €995 net . Raw material requirements: - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: used, HERBOLD single-shaft shredder EWS 45/200 Isdow Rw U Espfx Adija With pressing device (pendulum arm) Working width 2000 mm Rotor diameter 450 mm Drive 2 x 90 kW Machine in very good condition, ready for operation

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, functionality: fully functional, machine/vehicle number: SH12005, Untha LR 630 Chipper Operating Hours: 1 h Demonstration Machine Ma. No. SH12005, Year 2024 Item Number: JA_G250303 Description Feed Opening: 624 x 792 mm Hopper Capacity: 0.43 m3 Rotor Diameter: 248 mm Speed: 98 rpm Power: 400V/50 Hz, 18.5 kW Blades: 17 Screen Hole: 15-20 mm Suction Nozzle: 160 mm Weight: Approx. 1300 kg Dimensions (W x D x H): 1740 x 1220 x 1670 mm Cable Harness: 3 m + Connection for Screw Discharge Subject to errors and changes in technical specifications. Note for new machines: • Prices are for pickup (unless otherwise stated!) from our location in Ottendorf-Okrilla, Germany - Free shipping! (unless otherwise stated) • Subject to prior sale! • You will receive an invoice with VAT shown. • The buyer is free to inspect the items at the location. • Our general terms and conditions apply. • Special agreements are only possible in writing. • Any items in the background of the image are not included in the scope of delivery. • Saw blades are for illustrative purposes only and are not included in the scope of delivery. Iedjv Tbqlopfx Adiea Shipping options: • We would be happy to provide you with a transport quote. • Pickup from our location in Ottendorf-Okrilla, free of charge upon request. (Assembly and instruction of the goods for demonstration purposes is optionally available upon request!) • Optionally, our trained service staff will assemble the machine at your location and provide you with a brief instruction. Travel, driving, and service times are subject to an additional charge.

Condition: excellent (used), CATALOG NUMBER 7770 TECHNICAL DATA - Inlet width 260mm - Inlet height 240mm - Shaft width 350mm - Shaft diameter 350mm - Number of knives 2 pcs - Sieve size 28mm - Outlet diameter 210mm - Auto-reverse - Upper track, feed system 1.1kW - Lower toothed feed roller, 2 pcs, 0.75kW - Feed belt length 3700mm Iodpfxjxl Dzts Adiea - Feed belt width 250mm - Main motor 22kW - Overall dimensions L/W/H 5400x1000x1200mm - Weight of machine and feeder 1600kg ADVANTAGES – Made in Germany – Auto-reverse – With conveyor belt – Used chipper, very good condition Net price: 38,900 PLN Net price: 9,260 EUR at exchange rate of 4.2 EUR (Prices may vary with significant fluctuations)

Condition: ready for operation (used), A single-shaft shredder Lindner is available. Power: 160kW, working width: 2525mm, rotor speed: 100rpm, knife system: Mono-Fix, hopper opening X/Y: 3200mm/2400mm, volume: 5.6m³, filling height: 2600mm. Machine dimensions X/Y/Z: approx. 4750mm/2500mm/3400mm, weight: approx. 15500kg. Documentation available. An on-site inspection is possible. Iedpfexvruiex Adija

Condition: good (used), Year of construction: 1996, overall weight: 9,960 kg, JENZ AZ 35 D/Electrical Issue/Shredder/Chipper • Manufacturer: Jenz • Model: AZ 35 D • Year of manufacture: 1996 • Total weight: 9960 kg • Engine: Mercedes-Benz 6-cylinder • Electrical issue • Rotor and beaters in good condition • Discharge conveyor as new • Power: kW/HP • Documentation • German machine • Immediately operational • This offer is non-binding and subject to change. Iedexb Dkyjpfx Adioa - Subject to prior sale, - Errors and/or typographical mistakes reserved. - Sale according to our terms and conditions.

Condition: new, Year of construction: 2025, Delivery time approx. 3-4 months MRZ 830 Shredder Custom tariff number: 84659600 Feed opening 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multi-rotatable Hydraulically operated slider Screen perforation of your choice (10 - 40 mm) Suction nozzle Ø 200 mm Weight approx. 1,600 kg Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm Turbo clutch Included as standard: - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide Ijdpfod Dgw Uex Adiea - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer. Additional shredder options: - Raise shredder by 30 cm (prepared for conveyor belt) + €2,140 net - Articulated conveyor belt + €8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet + €5,980 net - Conveyor belt and overbelt magnet control + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - Moisture content (dry) must be below 30% - Installation temperature: temperature-controlled room at least +5°C - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: used, Year of construction: 2009, functionality: unexamined, machine/vehicle number: 7185, Zerma single-shaft shredder with hopper cover Iedpfx Asxzrzmjdija

Condition: new, Year of construction: 2023, The ideal machine for shredding hardwood and softwood Another machine, available immediately (ex works Neckartailfingen) . Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Knives: 14+2 pieces, 40x40mm, multiple rotatable, Rotor diameter: 260 mm, Control: Omron SPS, Cutting unit opening 600 x 800 mm, hopper volume approx. 0.6 qbm, hydraulically operated pusher Screen perforation of your choice (12 - 40 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm . Iodpfxod E R D So Adija The following options are available at extra cost: - Additional row of knives + 995 € net (28 instead of 14) - Surcharge for 4-sided segment shelf + € 2,170 net (prevents blocking of the pusher. Recommended for materials with a thickness of less than 3 mm) - Raise shredder by 30 cm (preparation for conveyor belt) + € 1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overbelt magnet + € 5,980 net - Conveyor belt and overbelt magnet control + € 2,750 net (start and stop synchronized with the chipper) - Special bearing +1,540 € (rarely required. Closed, even more stable rotor bearing. Possibly a consideration for sieves smaller than 15 mm or with a lot of fines. Not necessary if the bearings are lubricated with grease every approx. 2 weeks during operation) . Requirements for the raw material: - The moisture content (atro) must be below 30 % - Metals and mineral impurities such as sand, stones etc. lead to increased wear. . We will be happy to carry out a free test with your material and invite you to visit us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

Year of construction: 2023, condition: new, Machine in preproduction machine available Advantages: + special rotor with reduced knife protrusion Iodpodv Eu Hjfx Adija + Motor 22 kW + effective square knife * for pallets: up to 10 pallets per hour * depending on the sieve and material. With smaller residual wood, significantly more. Engine: 22 kW; 400 V - 50 Hz - 3 ph, Sieve: 15/20 mm hydraulically operated slide Current screen perforation (15/20 mm) * can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: The color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star / delta start - fast hydraulics - automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - cycle control to avoid idle times, - performance-increasing step control of the hydraulic slide, - Pertinax guides for hydraulic slides, - vibration-damping machine feet, - CE conform. The following options are available at an additional cost: - Additional row of knives + € 2,790 - segment bottom + € 6,890 (recommended for materials with a wall thickness thinner than 3 mm) - Special K-rotor storage + € 3,480 If necessary, consider shredding plastic with sieves smaller than 15 mm or with a lot of fines. If the bearings are lubricated with grease every approx. 4 weeks in operation, this is not necessary) - Raise the shredder by 30 cm (preparation for conveyor belt) + € 2.480 net - Angled conveyor belt (discharge height approx. 220 cm) + € 12.980 net - Overbelt magnet + € 5.980 net - Control conveyor belt and overbelt magnet + € 2.750 net (Start and stop synchronized with the hacker) - Exhibition hopper 1500x1500 mm + € 3.480 net Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: as good as new (ex-display), Year of construction: 2023, The ideal machine for shredding cables including optimized cutting geometry approx. 9 operating hours Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Blades: 14 pieces, 40x40mm, multi-rotatable, Rotor diameter: 260 mm, Control: Omron SPS, Cutting unit opening 600 x 800 mm, hopper volume approx. 0.6 qbm, hydraulically operated pusher Screen perforation of your choice (15 - 40 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm The following options are available at extra cost: - Double row of knives + 995 € net (28 instead of 14) - Surcharge for 4-sided segment base + € 3,750 net (prevents blocking of the pusher. Recommended for shredding plastics, paper, veneer with a thickness of less than 3 mm). - Raise shredder by 30 cm (preparation for conveyor belt) +1,980 € net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overbelt magnet + € 5,980 net - Conveyor belt and overbelt magnet control + € 2,750 net (start and stop synchronized with the chipper) Bea9ia3l27 Requirements for the raw material: - Mineral impurities such as sand, stones, etc. lead to increased wear. We are happy to carry out a free test with your material and invite you to visit us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos. Ijdpfegmfa Aex Adioa