Used cylindrical grinding machines 1100-2099mm grinding length for sale (43)

Condition: excellent (used), Year of construction: 1971, Tos cylindrical grinding machine Fsdpfoz N Snzox Al Sogh Complete with all accessories.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, grinding length: 1,650 mm, grinding diameter: 400 mm, We offer a new BUB40 x 1500 NC machine equipped with a MITSHUBISHI NC controller. The machine is still under lease with ING Lease. It has been thoroughly refurbished based on the TOS HOSTIVAR BUB 40 model by FAS GŁOWNO. Technical data: Fsdpfx Aljwzkywe Sogh • Maximum workpiece diameter: 400mm • Maximum workpiece length: 1500mm • Centre height: 200mm • Distance between centres: 1500mm • Minimum grindable workpiece diameter with a 380 mm grinding wheel: 20mm • Tailstock quill stroke: 40mm • Maximum tailstock clamping force: 4000N • Spindle headstock centre taper: ISO 296-1991/Morse 5 • Tailstock centre taper: ISO 296-1991/Morse 5 • Maximum workpiece weight between centres: 500kg • Maximum workpiece weight in chuck (including chuck): 100kg • Machine width (with enclosure): 6650mm • Machine depth (with enclosure, without control panel): 2400mm • Machine height (with enclosure): 1850mm • Machine weight: 7000kg • Total power requirement: 38kVA Grinding spindle: • Standard grinding wheel dimensions: 500 x 80 x 203.2mm • Grinding spindle drive motor power: 11kW • Grinding spindle rated speeds (for 430 mm / for >430 mm and 500 mm wheels): 2000 / 1744 rpm • Grinding headstock traverse servo motor power: 2kW • Grinding headstock traverse servo motor torque: 9.5Nm • Maximum continuous X-axis traverse speed: 2m/min • Minimum X-axis grinding wheel increment: 0.001mm • Maximum continuous X-axis traverse speed: 6m/min • Minimum X-axis grinding wheel increment: 0.001mm • Maximum grinding wheel increment in INC mode: 0.1 mm • Table traverse servo motor power: 3.5 kW • Table traverse servo motor torque: 16.7 Nm Workpiece spindle: • Workpiece spindle speed range: 1 – 150 rpm • Workpiece spindle servo motor power: 3.5kW • Workpiece spindle servo motor torque: 16.7Nm More information available upon request via email or phone.

Condition: used, Year of construction: 2017, grinding length 1500 mm centre height 180 mm weight of the machine ca. 3,9 t dimensions of the machine ca. L: 4900 x 1650x 1800 m Fgsdpfx Alowm Rqge Seh

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, grinding wheel diameter: 600 mm, total width: 2,500 mm, total length: 5,600 mm, total height: 2,300 mm, grinding diameter: 500 mm, type of input current: three-phase, grinding wheel width: 125 mm, feed length X-axis: 430 mm, feed length Z-axis: 1,500 mm, grinding spindle motor power: 20,000 W, overall weight: 7,400 kg, pivoting range: 225 °, input frequency: 50 Hz, controller manufacturer: Sinumerik 840D sl, drive type: Siemens Sinamics S120, control type: CNC control, Equipment: rotational speed infinitely variable, Schaudt precision for shafts up to 1500 mm in length and 500 mm in diameter – completely overhauled and modernized by Serwema Retrofit Solutions, Chemnitz. The PF5 is one of the most reliable external cylindrical grinding machines in its class: rigid bed, 20 kW grinding spindle, 600 kg between centers. Serwema completely rebuilds it, with a Siemens Sinumerik 840D sl, Sinamics S120, direct measuring systems in X and Z, and an automatic B-axis that swivels the grinding spindle from -45° to +225°: longitudinal, face, and taper grinding, shoulder grinding, and with an optional internal grinding spindle, also boring – in a single setup, without manual retooling. Proven Schaudt mechanics, new electrical systems, new drives, new safety technology: you get the performance of a new machine at a fraction of the price, inspected in Chemnitz together with you. The user-friendly interface guides the operator through work piece, wheel, and cycle data screens without the need for programming. Marposs balancing and dressing systems reduce non-productive time and protect the grinding wheel; grinding wheels up to 600 mm in diameter and 125 mm in width with a peripheral speed of 50 m/s allow for high material removal rates during rough grinding and the finest surface finishes during finishing. Application areas: shafts, spindles, rollers, hydraulic pistons, and gear components in mechanical engineering, drive technology, the printing and paper industry, and contract grinding shops. Fsdpfxsz E H Ite Al Sogh Technical data: max. grinding length 1500 mm, max. grinding diameter 500 mm, work piece weight between centers 600 kg, max. grinding wheel Ø 600 mm, max. wheel width 125 mm, peripheral speed 50 m/s, grinding spindle power 20 kW, X-axis travel 430 mm, B-axis swivel range -45° to +225°. Dimensions approx. 5.6 x 2.5 x 2.3 m, weight approx. 7.4 t. Scope of supply: new Siemens Sinumerik 840D sl control with Sinamics S120, air-conditioned switch cabinet manufactured in-house, direct measuring systems for X and Z, user-friendly interface, automatic B-axis, balancing and dressing (Marposs), machine enclosure with state-of-the-art safety technology, lubrication and hydraulic unit, new paint finish RAL 5015/7035, geometry inspection according to manufacturer's standard with protocol, operating manual. Options: internal grinding spindle, paper band filter with or without magnetic separator (Polo or Filtec), installation and commissioning, operator training.

Condition: used, Year of construction: 2026, grinding diameter 350 mm grinding length 1500 mm Fgjdpfxoy R Edve Al Seh centre height 175 mm grinding wheel diameter 400 mm grinding wheel width 50 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0,001-0,030 mm/Ø 0-0,95 mm/Ø ± 6 ° longitudinal feed of the table 1750 mm table speeds 0,02-6 m/min 130 kg 130 inkl. Spannugkg kg 80 mm total power requirement 6,5 kW weight of the machine ca. 2,9 t dimensions of the machine ca. 5,6 x 2,0 m Komplett überholt mit Umbau auf Technik der modernsten Ausführung. -Neuer Schaltschrank -Modernes Hydraulikaggregat -Moderner Werkstückspindelstock -Moderner Reitstock mit Feinverstellung -Moderner Steuerblock,Zustellung,Getriebekasten -Innenschleifvorrichtung für Spindeln mit 80mm Durchmesser -Schwenkwinkelanzeige Schleifspindelstock -Schleifwinkelanzeige Obertisch -Luftabhebung Obertisch -Reitstock mit Feinverstellung -Sinuslineal -stufenlos regelbare Schleifspindeldrehzahl 70-100% -stufenlos regelbare Innenschleifspindeldrehzahl 70-100% -Auf Wunsch Umbau auf separaten Innenschleifspindelantrieb mit Kühlung und regelbarer Innenschleifspindeldrehzahl 0-100% -Spritzschutztüren z-Achse Optionen: Schwenkwinkelanzeige Werkstückspindelstock Schwenkwinkelanzeige Schleifspindelstock Schwenkwinkelanzeige Obertisch Teilraumverkleidung in X sowie Sonderwünsche

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1845/455, Completely refurbished: Mechanics, geometry, hydraulics, and electrical components Wheelhead Disassembly, cleaning of parts, replacement of worn and defective components, motor overhaul, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings, plus adjustment. New paintwork. Workhead Disassembly, cleaning of parts, replacement of worn and defective components, motor replacement, replacement of belts. New spindle bearings. New paintwork. Tailstock Disassembly, cleaning of parts, replacement of worn and defective components, motor replacement, replacement of belts. New spindle bearings. New paintwork. Internal grinding attachment Fgjdpfoxt Ilfox Al Soh Disassembly, cleaning of parts, replacement of worn and defective components, installation of the support and geometry alignment. New paintwork. Hydraulics Disassembly, motor replacement, hose replacement, defective and worn parts replaced. Hydraulic block checked. X-Axis Disassembly, replacement of worn items such as O-rings, seals, rings, etc., overhaul of hydraulic piston, regrinding of tables. Z-Axis Disassembly, regrinding of tables, replacement of worn and defective parts, overhaul of hydraulic piston, scraping of V and flat guides. New paintwork. Measuring system Digital 2-axis display included. Electrical cabinet Replacement of motor contactors and relay controls. New wiring. New variable speed drive (frequency inverter) for the workhead. TECHNICAL SPECIFICATIONS Distance between centers: 1500 mm Distance between centers (workhead to tailstock overhang): 1650 mm Center height, standard: 125 mm Center height with riser blocks: 225/250 mm Maximum grinding diameter: Ø 250 mm Maximum grinding diameter with riser blocks: 450/500 mm Table Usable surface: 2060 x 140 mm Max. length and width for surface grinding: 1750 x 200 mm Longitudinal travel, manual or hydraulic: 1750 mm Manual table movement, 1 handwheel revolution – coarse: 20.006 mm Manual table movement, 1 handwheel revolution – fine: 2.457 mm Table speed, continuously via hydraulics: up to 6 m/min Table swivelling: 6° Stop and return: 0–5 sec. Workspindle Workpiece speeds, continuously variable (electric): 20–400 rpm Swivelling: 360° Workspindle taper (internal): MT5 Tailstock Internal taper, tailstock spindle: MT3 Spindle retraction, manual or hydraulic: 30 mm Diamond dresser taper (internal): MT0 Universal grinding head Cross slide travel for wheel: 285 mm Rapid traverse for wheel slide, front and rear: 40 mm Grinding spindle speeds: 1500 – 1700 – 2200 – 3600 rpm Vertical grinding spindle movement, center heights: 125–330 mm Max. wheel for cylindrical grinding: 400 x 50 x 127 mm Max. wheel for surface grinding: 250 x 20 x 76 mm Head swivelling with locking at every 90°: 270° Wheel feed 1 division of the micrometer drum: 0.005 mm/Ø Automatic wheel feed, max.: 0.9 mm/Ø Motors Grinding spindle motor: 2,900 rpm / 4.0 hp Workspindle motor: 3,000 rpm / 2.0 hp Coolant pump motor: 2,850 rpm / 0.12 hp Internal grinding attachment Bore: 70 mm Internal grinding spindle speed Ø70 mm: 14,000 rpm Internal grinding spindle speed Ø50 mm: 21,000 rpm Subject to error or omission, the technical information is provided without obligation.

Condition: good (used), Year of construction: 2009, functionality: fully functional, Travel distances Max. grinding diameter: 500 mm Max. grinding length: 2000 mm Fgedpfxoy Idtqe Al Soh Max. workpiece weight: 500 kg between centers Swiveling of grinding head: +45 / -15° (manual) Grinding wheel: 500/80/203 mm Accessories: - Steady rest - Enclosure A video of the machine under power can be provided upon request.

Condition: used, Year of construction: 2000, grinding diameter 300 mm grinding length 1200 mm workpiece turning speeds 6000 U/min max. workpiece weight 70 kg control FANUC peripheral speed 140 m/sec grinding wheel size CBN 400 x 5 mm Spindle power 24 kW weight of the machine ca. 11 t Quickpoint 5002/10 CNC external cylindrical grinding machine, built in 2000 Fgodpfx Aljy Dibxj Seh - Regular maintenance carried out - Documentation available Special accessories: - Junker novotecnic cooling lubricant system - 2x LTA II R/H extraction systems - Hyfra recooler - 4 grinding wheel blanks - Oil pan with grating *Disclaimer: All information is non-binding and may be incomplete or inaccurate. Subject to change without notice. No liability is accepted for the accuracy or completeness of the information provided. The disclosure or transfer of the data provided by us is not permitted without our express written consent. Translated with (free version)

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Demonstration machine BUB 50/3000 CNC Control system: Siemens One Digital axis drives Includes extensive application software Includes electronic handwheel for X/Z axis Center height: 400 mm Distance between centers: 3000 mm Weight between centers: 500 kg Z-axis travel: 3250 mm Positioning accuracy X-axis: 0.001 mm Tool holder for workpiece spindle: MK 5 Tool holder for tailstock: MK5 Fjdsv N D Hbepfx Al Sjgh Drive power: - Grinding spindle: 11 kW - Workpiece spindle: 2.5 kW - Total installed: 22 kW Machine design with full enclosure Preparation for dust extraction system included Separate screen, touch probe control, automatic balancing and gap/crash control included. 1 grinding wheel: 508 x 80 x 203.2 mm Immediately available. Optional filter system available in various designs.

Condition: used, grinding diameter 350 mm grinding length 1500 mm centre height 175 mm grinding wheel diameter 400 mm grinding wheel width 50 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0-40 mm/Ø 0-40 mm/Ø ±6,5 ° longitudinal feed of the table 1530 mm table speeds 0,02-6 m/min 130 kg cross travel max. 270 mm 130 inkl. Spannung kg 80 mm tailstock quill taper MT 3 quill travel 30 mm total power requirement 6,5 kW weight of the machine ca. 3,05 t dimensions of the machine ca. 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern and future-proof control system. Photo of machine already delivered with special options -Operation via the touch panel is extremely simple. -The symbols on the control panel are practically identical to the original original control system, so there is no need for familiarisation. -Diagnostic function with display of PLC messages and digital I/O -Dressing function can be extended or changed at the customer's request. -Orientated spindle stop of the workpiece spindle possible on request. -New maximum infeed of 40 mm can be extended on request. -Digital display in 2 axes. Resolution x-axis 0.5my Options: -Encoder with digital display in the workpiece headstock -Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) with spindle possible) -New stable internal grinding device diameter 80mm or 100mm with height adjustment. -Increase of the centre height to max. 225mm -Speed control for the grinding spindle Included: -Operating tool -Clamping tube for chuck Further accessories on request. The x-axis of the machine has an electronically controlled infeed system with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Versatile application in production for external cylindrical and internal internal grinding or for external, face and internal grinding in one clamping clamping of individual parts. Fgodeuxftrspfx Al Soh Possible options: -Semi-automatic dressing cycles for external and internal grinding -automatic dressing compensation. -Measuring control

Condition: good (used), Max width between claws 1200mm Max diameter of processed material 500mm Fsdetn Rw Nepfx Al Sogh

Condition: used, TOS BHU 50×2000 – USED UNIVERSAL CYLINDRICAL GRINDER A used TOS BHU 50 universal cylindrical grinder, center distance 2,000 mm, from a company liquidation. Inspection on-site or via video call is possible at any time. The following technical data are taken from the machine-specific TOS-BHU-50 data sheet and serve as a technical reference. Binding values for this individual machine will be determined after inspection. KEY FEATURES - Automatic program for longitudinal, transverse, and plunge grinding, external and internal - Precision standard IT class 5 - Spindles on hydrodynamic bearings with automatic bearing adjustment - Infinitely variable workpiece spindle speed, swivel headstock on both sides - Swiveling grinding wheel head TECHNICAL DATA (BHU 50 SERIES) - Grinding diameter: 500 mm - Center distance: 2,000 mm - Center height: 250 mm - Grinding wheel (Ø x width x bore): 500 x 80 x 203 mm - Diameter of worn grinding wheel: 380 mm - Diameter of workpiece in open/closed steady rest: 110 mm - Diameter of chuck: 200 mm - Taper in workpiece spindle and tailstock spindle: MK 5 - Swivel range of workpiece spindle headstock: 90°, grinding wheel headstock: ±45° - Largest longitudinal travel of the table (at 2,000 mm center distance): 2,290 mm - Table speed, infinitely variable: 0.05-5 m/min - Grinding spindle speed: 1,230 / 1,470 rpm - Workpiece spindle speeds: 16 steps, range 12-400 rpm - Grinding wheel headstock motor: 7.5 kW - Total power consumption: 16 kVA - Machine weight (at 2,000 mm center distance): approx. 6,600 kg - Largest workpiece weight: 300 kg between centers, 300 kg cantilevered STANDARD EQUIPMENT (SERIES) - Grinding wheel 500 x 80 x 203 mm for 33 m/s circumferential speed, flange, and guard - Dressing and mounting device for the grinding wheel flange, balancing mandrel - 2 fixed centers MK 5, 2 open steady rests (Ø 10-110 mm) - Sedimentation coolant system, splash guard - Micrometric dressing device for the grinding wheel (tailstock) - Driver and operating key set, machine lamp, technical documentation We would be happy to clarify in advance whether the specific machine has the full range of features based on its actual equipment. CONDITION Used machine from a company liquidation. Sold "as is, where is," warranty excluded. On-site inspection or video call inspection is highly recommended; independent functional and accuracy testing is available upon request. A general overhaul is possible upon request and for an additional charge. OUR SERVICE Fodpfxozi Strj Al Sjgh Online or on-site factory inspection, transport can be organized upon request, installation, commissioning, and operator training by our service technicians, direct German-speaking contact person for spare parts and support, member of FDM, the German Association of Machine and Tool Wholesale. As this is an individual machine, availability is subject to prior sale. Please call or write to us briefly, and we will arrange an inspection appointment as soon as possible.

Condition: used, grinding diameter 350 mm grinding length 1500 mm centre height 175 mm weight of the machine ca. 3 t High-End Kellenberger 1500U Ideal for spindle producer or overhauler -BEMA Internal grinding device with separate, cooled motor. Grinding spindle and internal grinding spindle motor electrically interlocked! Internal grinding spindle can only be switched on when it is in position. A quantum leap in safety -Infinitely variable grinding spindle speed 1000-1500 rpm -Infinitely variable internal grinding spindle speed 0-100%. -Digital display of grinding spindle speeds -Swivelling angle display top table -swivel angle display grinding headstock -Marposs gaper sensor for external grinding only -fluid gating sensor Marposs internal grinding -Center height up to 250mm possible Machine is already delivered. Identical machine can be built with additional with additional options. Fgsdpfx Alst Ii Rrj Ssh Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.

Condition: as good as new (ex-display), Year of construction: 2025, Offered is a CNC controled universal cylindrical grinding machine EMAG Weiss W 11 CNC. The machine is suitable for external-interna- face and cylindrical grinding. The W 11 CNC cylindrical grinding machine is perfect for one-offs- / prototype- and serial production. Fodpjr Ey Husfx Al Sjgh This cylindrical grinding machine is also used for sample production in the field of training and maintenance. CONTROL Eckelmann TECHNICAL DATA Workpiece length: max. 1.500 mm Center height: 200 mm | Option 320 mm Workpiece weight: 250 kg Workhead: MK 4 | Option MK5 / MK6 Tailstock: MK 4 TOOL CARRIER Single wheel straight / incliend, but also possible 2 wheels on B-axis combined with internal grinding spindle. Price, delivery time and equipment of the machine according to agreement.

Condition: excellent (used), Year of construction: 1969, BHU 40/1500 TOS Hostivar Cylindrical Grinder Grinding diameter 400 mm Grinding length 1500 mm Maximum workpiece weight 300 kg Grinding wheel: 600 x 150 mm Longitudinal travel of the table (x-axis): 1 – 1790 mm Grinding head swivels +/- 45° Table swivels +/- 5° Spindle taper: Morse 5 Maximum rotational speed of the grinding wheel spindle: 1240 rpm / 2100 rpm Fodpfxszg H E Ro Al Ssgh Total power consumption: 22 kVA Machine weight: approx. 7000 kg Cooling system: none Accessories: none

Condition: good (used), Year of construction: 2002, LANDIS 3SE 14"x 60"ANGLEHEAD CNC GRINDER REBUILT BY LANDIS & TOOLED 2002 Equipped with: NEW FANUC CONTROL 2007 2-Axis Template Truform Servo Step Profile 30 Degree 30" Wheel Fgodpfx Ajrtr Eaol Ssh Dead Headstock Table Traverse Marposs E39 Marposs Table Gauge Lateral Locator 3-Gauge TIR Gauge Steady Rests Wheel Balance Servo Motor-Traverse Stepping Motor Mist Collector Specifications: Swing: 14" Center Distance: 60" Motor: 1200 rpm Motor Pulley Diameter: 7.031" Spindle Pulley Diameter: 6.5" New Wheel Diameter: 30" Worn Wheel Diameter: 22" Max. Wheel: 8500 sfpm Max. Workhead: 333rpm X-Axis Ball Screw Pitch: 5mm per rev. X-Axis Total Stroke: 14.74" X-Axis Motor Pully Wheel Feed Diameter: 3" X-Axis Ball Screw Pulley Diameter: 3" Z-Axis Ball Screw Pitch: 10mm per rev. Z-Axis Total Stroke: 72.88" Z-Axis Motor Pulley Diameter: 3" Z-Axis Ball Screw Pulley Diameter: 6" Total Stroke: +/-2mm Total Marposs Voltage Output: =/-10vdc Dresser One Revolution of the Stepping Motor: .045" Diamond One Revolution of the Stepping Motor: .005" Weight: 25,000 lbs.

Condition: reconditioned (used), Year of construction: 2024, functionality: fully functional, grinding wheel diameter: 500 mm, total width: 2,300 mm, total length: 6,730 mm, total height: 1,800 mm, grinding diameter: 320 mm, workpiece weight between centers: 250 g, grinding wheel width: 80 mm, spindle speed (max.): 1,800 rpm, feed length X-axis: 350 mm, feed length Z-axis: 1,550 mm, Good morning, We have to offer a six months old CNC SWG32 x 1500 CNC machine with SIEMENS SINUMERIC 828D sL control (after a complete revitalization of TOS HOSTIVAR BUB32 machine) The machine is still in Lease at ING Lease. The machine has already been partially repaid, our company does not want to recover the repaid installments. The assignment of the lease applies only to the remaining installments to be repaid (the cost of the assignment is borne by our company). For more technical and financial details, I invite you to contact me at the e-mail address or by phone Fedpfx Aovkc D Iel Ssgh Specification of the machine: - Year of manufacture:2024 - Maximum grinding diameter: 320 - Maximum grinding length: 1500 - Supply voltage: 3 x 400V - Control voltage: 24V - DC - Metric system - Maximum permissible weight of objects clamped in the canine: 250 kg - Total travel distance in the X axis: 350mm - Rotation of the grinding wheel spindle: 50 - 1500 rpm (7.5kW) - Plunge grinding infeed speed range 0.03 to 20mm/min - Wheel diameter: 500mm - Morse taper 5 - Measuring probe to determine the workpiece - Workpiece support - Electronic wheel (handheld panel)

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets Fsdpfx Aouxfu Nel Ssgh New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: used, grinding diameter 350 mm grinding length 1500 mm centre height 175 mm total power requirement 5,5 kW 500mm grinding wheel diameter New servomotors in x and for the workhead. Photo of already delivered machine in UR equipment. Fgodpsuwv Idofx Al Seh -Operation via the touch panel is extremely simple. -The symbols on the control panel are practically identical to the original original control system, so there is no need for training. -Diagnostic function with display of PLC information and digital I/O -Dressing function can be extended or changed at the customer's request. -Oriented spindle stop of the workpiece spindle possible on request. -New maximum infeed of 40 mm can be extended on request. -Digital display in 2 axes. Resolution x-axis 0.5my Options: -Rotary encoder with digital display in the workpiece headstock -Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) with spindle possible) -Increase of the center height to max. 225mm -Speed control for the grinding spindle Translated with (free version)

Condition: used, KELLENBERGER KEL-VARIA R175 x 1500 is a CNC cylindrical grinder engineered for high precision, top accuracy and reliable production. Capacities: centre height 175 mm, distance between centres 1500 mm, Z-axis 1650 mm, workpiece weight on centres max. 150 kg; grinding wheel Ø500×80 mm (bore 203 mm) or Ø400×63 mm (bore 127 mm); max wheel travel 320 mm. Key specs: wheel speeds stepless 1000–2150 rpm (peripheral speed 45 m/s); feed 7500 mm/min; work spindle swivels -10/+100° with 8–800 rpm; permitted load 160 Nm; grinding spindle motor 7.5 kW; work spindle motor 2 kW; 3×400 V 50 Hz; rapid 15 m/min; approx. weight 6000 kg; dimensions 4700×2300×2000 mm; air 6 bar. Accessories: coolant system, paper filtration, MARPOSS touch probe, set of grinding wheels, rotary centre, set of centers, set of workpiece drivers, set of throat gauges, lamp, 2 tool cabinets, tailstock with fine adjustment, oil mist extractor, spindle nose for collets. Achieves tight tolerances; typical applications: automotive, watchmaking, machine tool Fgedpeyxn Itjfx Al Ssh

Condition: good (used), Year of construction: 1990, Ref. -No.: 10301 Manufacturer: TITAN Type: RU 350 x 1-1500 Year of construction: 1990 Type of control: Konventionell Storage location: Halberstadt Country of origin: USA Max. Grinding length: 1.500 mm Max. Workpiece Weight: 300 kg Grinding Diameter: 350 mm Fjdpfxeycpv Ss Al Ssgh Max. Dia. Of Grinding Wheel: 280-500 mm Grinding Wheel Width: 80-100 mm

Condition: used, grinding diameter 250,350,450 mm grinding length 1500 mm centre height 125,175,225 mm grinding wheel diameter 400 mm grinding wheel width 50 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0,001-0,030 mm/Ø 0-0,95 mm/Ø ± 6 ° longitudinal feed of the table 1750 mm table speeds 0,02-6 m/min 130/150 kg 130 inkl. Spannugkg kg 80 mm total power requirement 6,5 kW weight of the machine ca. 2,9 t dimensions of the machine ca. 5,6 x 2,0 m Overhauled with geometric KELLENBERGER protocoll. Pictures of a similar 1000mm machine. -New electrical cabinet -Modern workhead -Modern tailstock -Modern hydraulic power unit -air lift for grindingwheeel head -modern internal grinding device Extension of the upper table swivel to 10° Optional: -Swivel angle digital read out upper table -Swivel angle digital read out workhead -Swivel angle digital read out grindingwhell head Fgsdpjd Ih Dwsfx Al Seh -Splash protection door z-axis -Splash protection housing x-axis etc. ADDITIONAL: -we can offer service for the machines -we can offer technical advice -we can offer training -we have spare parts -we have accessories

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, center width: 1,200 mm, overall weight: 7,000 kg, travel distance X-axis: 500 mm, travel distance Z-axis: 800 mm, controller model: Bosch Rexroth MTX, TECHNICAL DETAILS Center distance: 1,200 mm Max. outer diameter: 350 mm Max. workpiece weight between centers: 50 kg Cross slide, X-axis Travel, X-axis: 500 mm Max. speed: 30 m/min Resolution: 0.1 µm Longitudinal slide, Z-axis Travel, Z-axis: 800 mm Max. speed: 30 m/min Resolution: 0.0005–0.1 mm Fsdpfx Aezwm Aksl Sogh Multi-function head, B-axis Swivel range: -45° to +225° Swivel time for 180°: < 3 s Positional accuracy: 0.0002° Repeatability: 1″ Resolution: 0.001° External machining Max. machining length: 750 mm Peripheral speed: 50 corundum / 80 CBN Drive power: 15 kW Max. grinding wheel dimensions: Ø 400 × 50 × 152.4 mm Internal machining Max. bore diameter: 250 mm Max. bore depth: 235 mm Drive power S1: 1.8–7.5 kW Speed range: 30,000–50,000 rpm Workpiece spindle, C-axis Max. speed: 1,500 rpm Drive power: 1.8 kW Drive torque: 90 Nm Resolution of measuring system: 0.001° Roundness accuracy: 0.8 µm Positional accuracy: 0.0001° Tailstock Quill stroke: 50 mm / 80 mm Quill diameter: 60 mm Bearing: hydrostatic Fine adjustment for cylindricity corrections: ± 40 µm 3-point steady rest Clamping range, diameter: 20 – 150 mm Coarse adjustment: 40 µm Fine adjustment: 2 µm Adjustability: stepless MACHINE DETAILS CNC control: Bosch Rexroth MTX Dimensions & Weight Dimensions (L x W x H): 2,850 x 2,470 x 2,290 mm Weight: 7,000 kg EQUIPMENT 3-point steady rest

Condition: used, functionality: unexamined, Danobat Universal Grinder model 1200 RP with automatic diamond dressing device, capable of working in automatic cycle, maximum grinding diameter 270mm, maximum wheel diameter 400mm, maximum wheel width 60mm, head power 12 HP. Fodpfx Asw Iv Huol Segh

Condition: used, grinding diameter 250,350,450 mm grinding length 1500 mm centre height 125,175,225 mm grinding wheel diameter 400 mm grinding wheel width 50 mm bore 127 mm Fgjdpfx Alsd Ih Dvs Soh MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0,001-0,030 mm/Ø 0-0,95 mm/Ø ± 6 ° longitudinal feed of the table 1750 mm table speeds 0,02-6 m/min 130 kg 130 inkl. Spannugkg kg 80 mm total power requirement 6,5 kW weight of the machine ca. 2,9 t dimensions of the machine ca. 5,6 x 2,0 m Overhauled machine according to Kellenberger new machine protocoll